900mhz jammer design jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    165 900mhz jammer design jobs found, pricing in USD

    Hello . I’m looking for someone with jammer building experience. This jammer must be a spark gap based jammer . The frequency range that is must sweep is 1Mhz to 10Ghz Must be analog circuits! Digital circuits are too easy for the hackers to remotely disable. Must sweep between 1Mhz to 10Ghz Must use multiple antennas and/or broadband antennas.

    $683 (Avg Bid)
    $683 Avg Bid
    3 bids

    I am seeking a professional to create a LoRa IoT Jammer with the primary purpose of preventing unauthorized access. The successful candidate should have expertise in IoT communication systems and security strategies. Scope: - The jammer should operate on a small scale, less than 100 meters. - It needs to be effective against Communications and Tracking devices. Required Skills and Experience: - Comprehensive technical understanding of LoRa devices and technology - Proven successful experience in IoT communication jamming - Thorough knowledge of IoT security vulnerabilities and preventive strategies. This project is critical to my IoT security infrastructure; therefore, only experienced and highly skilled professionals should bid.

    $322 (Avg Bid)
    $322 Avg Bid
    11 bids

    I am seeking a professional to create a LoRa IoT Jammer with the primary purpose of preventing unauthorized access. The successful candidate should have expertise in IoT communication systems and security strategies. Scope: - The jammer should operate on a small scale, less than 100 meters. - It needs to be effective against Communications and Tracking devices. Required Skills and Experience: - Comprehensive technical understanding of LoRa devices and technology - Proven successful experience in IoT communication jamming - Thorough knowledge of IoT security vulnerabilities and preventive strategies. This project is critical to my IoT security infrastructure; therefore, only experienced and highly skilled professionals should bid.

    $331 (Avg Bid)
    $331 Avg Bid
    12 bids

    ...Target Frequencies: The jammer must operate on 433 MHz, 868 MHz, and 915 MHz bands. - Range Specifications: The effective disruption range should be up to 100 meters. - Intended Use: The primary purpose is to impede unauthorized IoT device operations. Key Skills: - Electronics Design - Wireless Communication - IoT Security Knowledge - RF Engineering Experience Needed: - Proven track record with radio-frequency devices. - Previous work with jamming equipment or IoT security. - Ability to design for specific frequency bands. Project Goals: - Create a functional prototype. - Ensure legality and compliance with regulations. - Deliver testing documentation. I'm looking forward to collaborating with a skilled professional who understands the nuances of IoT and RF...

    $379 (Avg Bid)
    $379 Avg Bid
    20 bids

    I'm facing a persistent problem with audio jamming at home, while trying to monitor conversation for personal reasons. The issue seems to be a consistent pattern of jamming, possibly by an audio jammer. While trying to make audio recordings, the output is distorted and there's a significant amount of background noise and low volume. This is a peculiar situation which calls for someone with a particular set of skills and expertise: - Clear understanding of audio technologies including jammers and ways to overcome them - Proficiency in audio recording equipment and software - Expertise in audio editing, amplification and noise reduction techniques - Familiarity with electronic device interference and how to resolve it The freelancer would need to propose improvements or...

    $89 (Avg Bid)
    $89 Avg Bid
    23 bids

    Model 4 pulsed threat radars with operating frequencies varying between 4-8 GHz with the EW Self-Protection System's jamming system on a fighter aircraft with an RCS of 12 m2 . Design the antenna for the jammer separately in MATLAB application and use the pattern of this antenna in the simulation. Perform a MATLAB simulation in which the detection (burn-through) distance of the J/S and the fighter is calculated for the jamming of the EW Self-Protection System at three different powers for each radar.

    $21 (Avg Bid)
    $21 Avg Bid
    4 bids

    I am looking for a skilled professional to design a radio jammer for a drone with the following requirements: Range: The jammer should have a range of up to 1 kilometer. Features: I should can covered a dome are where the jammer places Targeted Drones: The jammer should be able to target both recreational and commercial drones. Ideal Skills and Experience: - Experience in designing radio jammers for drones - Knowledge of drone technology and radio frequency jamming - Ability to customize the jammer based on specific features and requirements - Understanding of both recreational and commercial drone systems If you have the necessary skills and experience in designing drone jammers, I would love to discuss this project further with you.

    $516 (Avg Bid)
    $516 Avg Bid
    9 bids

    I'm looking for a freelancer to help me with a CAD design project. The project is for gym equipment, specifically for a squat rack accessory - trolley jammer arm plates. I do have specific dimensions and specifications for the CAD design that I will provide, and I do not have a specific software preference. I'm looking for someone with experience in a variety of CAD software, who can utilize 3D modeling to create the designs I need. With your help, I'm confident that we can create an innovative and high-quality product. The rack uprights are 60mm x 60mm with 26mm holes.

    $146 (Avg Bid)
    $146 Avg Bid
    106 bids

    ...deep understanding of antenna design and optimization, especially for PCBs, and should be capable of predicting antenna performance and, if possible, validating it. 1. Directional Antenna: Frequency: 1430MHz (primary focus), and 900MHz. Characteristics: It should be a narrow band or wide band design. The design should be focused on a directional radiation pattern. Requirements: Ability to predict and ideally validate the gain. Please specify the achievable gain for given sizes and shapes in your proposal. 2. Omnidirectional Antenna: Frequency: 1430MHz (primary focus), and 900MHz. Characteristics: It can be a narrow band or wide band design. The design should exhibit an omnidirectional radiation pattern. Skills Required: Strong backg...

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    17 bids

    I am looking for a skilled freelancer who can help me create a GSM signal jammer using Arduino. The project requires the following: Range: - The desired range for the jammer is long range, covering 30+ meters. Compatibility: - The jammer should be able to block GSM signals for 2G, 3G, and 4G bands. Hardware Assembly: - I would need assistance with assembling the hardware components. Ideal Skills and Experience: - Strong proficiency in Arduino programming. - Knowledge of GSM signal frequencies and bands. - Experience in hardware assembly and troubleshooting. If you have the necessary skills and experience, please reach out to discuss further details of the project.

    $28 (Avg Bid)
    $28 Avg Bid
    5 bids

    Shortwave 25mhz Audio Signal Jammer I am looking for a freelancer who can create a Shortwave 25mhz Audio Signal Jammer for personal use. The jammer should have a range of up to 50 meters and should be powered by mains power. I am looking for a freelancer to create a stationary jammer that targets a specific range of frequencies (20-30 MHz) for privacy purposes. The ideal candidate will have experience in audio signal jamming and be able to design and build a stationary jammer that effectively blocks audio signals within the specified frequency range. Skills and Experience: - Experience in designing and creating audio signal jammers - Knowledge of shortwave frequencies and signal jamming technology - Ability to create a compact and portable j...

    $509 (Avg Bid)
    $509 Avg Bid
    17 bids

    I am looking for an experienced engineer to design and build a radio jammer within a specific frequency range and to meet my specific needs. I am looking for a jammer to operate in the low frequency range between 0.1-500 MHz, more specifically FM radio range, and I need it to have a 300m radius coverage for the jamming signal. I need the jammer to be portable and ready for use quickly, so the project needs to be completed as soon as possible (ASAP). The ideal candidate should not only be knowledgeable about jammer design and have the necessary hardware, but also be experienced with programming and have an in-depth understanding of both software and hardware development. I look forward to finding an experienced professional who can deliver a high-qu...

    $25 (Avg Bid)
    $25 Avg Bid
    12 bids

    Hello there, I need to design an RF jammer as a school project, need some help and explenation on it. Thinking of using small design and jam a remote control or wifi signals.

    $118 (Avg Bid)
    $118 Avg Bid
    26 bids

    ...Signal Jammer I am looking for a freelancer to create a stationary jammer that targets a specific range of frequencies (20-30 MHz) for privacy purposes. The ideal candidate will have experience in audio signal jamming and be able to design and build a stationary jammer that effectively blocks audio signals within the specified frequency range. Key requirements include: - Design and build a stationary audio signal jammer - Target a specific range of frequencies (20-30 MHz) - Ensure the jammer effectively blocks audio signals within the specified frequency range - Ensure the jammer is stationary and not portable Ideal skills and experience: - Experience in audio signal jamming - Knowledge of shortwave frequencies and their propert...

    $519 (Avg Bid)
    $519 Avg Bid
    23 bids

    i am looking for someone who can design a jammer from 400MHz to 6GHz.

    $350 (Avg Bid)
    $350 Avg Bid
    7 bids

    the jammer should be portable and small and should identify and jam coming frequencies from 0-100hz. and it should cover a long distance.

    $117 (Avg Bid)
    $117 Avg Bid
    5 bids

    I want to Build a Customized High Voltage generator & EMP Jammer with Lot of Customization Contact For More Details of the Project [Removed by Freelancer.com] for Enquiry

    $453 (Avg Bid)
    $453 Avg Bid
    4 bids

    This desktop cell phone jammer with remote control is designed with five high-gain antennas, giving you 10 watts of power output to completely block all 3G, GSM, CDMA, DCS cell phone signals within 50 meters. This high-quality jamming device allows you to remotely turn your device on and off for instant jamming and shutdown. You can also control the power size through the knob switch to control the range of the jammer, which is very powerful. Key Features: 1. Adopt five high gain antenna design; 2. Remote control, very convenient; 3. Interference range up to 50 meters; 4. 10W output power - Blocks the strongest signal interference; 5. Can interfere with all 3G, CDMA and GSM cell phone signals; 6. Comes with mounting accessories that allow you

    $522 (Avg Bid)
    $522 Avg Bid
    10 bids

    I need a HF (high frequency) audio signal jammer powered by UK mains It should cover the area of a house and will need to successfully function to jam all frequencies in between 5-75mhz ONLY Sensible replies only. Please mention '5-75mhz' in your cover letter to make sure you have read and understood this What do you recommend? Lets discuss your strategy

    $588 (Avg Bid)
    $588 Avg Bid
    10 bids

    I need to create web site which shows the collected radio frequency from multiple jammers in the radius 5 km . I should be able to select jammer and frequency and jam that frequency. Interested freelancer can contact us.

    $308 (Avg Bid)
    $308 Avg Bid
    6 bids

    Hello there!, I am looking for someone to design an SDR based R.F jammer which can block R.F frequencies. Reference materials and schematics will be provided. Fabrication part will be done by us. More details will be revealed on private chat.

    $192 (Avg Bid)
    $192 Avg Bid
    6 bids

    Looking for a skilled person who is capable of making a portable IMSI /IMEI / GSM / 4G LTE Catcher d...meaning, once the unit is activated, it will receive all IMSI data of neighboring Phones and the ability to send sms to every phone number that is received by the device. 1: Unlimited send bulk sms by free cost 2 : The sender can be letters or alphanumeric both 3: Sending speed : up to 1000 sms per minute 4: Customized machine ,no need frequency phone ,no need set ARFCN 5: Support 2G,3G,4G without jammer, 850/900/1800/1900Mhz all frequency 6: Send free sms to all mobile phones within radius 2 KM distance 8: Imei/imsi catcher 9: It can send more than 100 characters in one sms 10:No need to know mobile numbers list advanced 11: SMS broadcaster to all operators cell phone in the...

    $750 (Avg Bid)
    $750 Avg Bid
    1 bids

    I want to build a wifi jammer for an 802.11ac 5G wifi camera (its on channel 149). The camera is about 20 metres away. A 20 to 30 metre range would be ideal. I dont want to jam anything else e.g. phones or 2.4Ghz etc There are ‘off the shelf’ development boards for this sort of thing but I’m not very experienced with electronics and I don’t know what items to purchase. I dont expect the assembly will be very complex because it’s not being made from scratch but I'll still need basic guidance. If it is relevant I've done some very simple tinkering with an ESP8266 NodeMCU V3 board (which was when I discovered I could only Deathur a 2.4gHz wifi camera with it). I can do basic fine tip soldering but I wouldn't enjoy building somethi...

    $11 (Avg Bid)
    $11 Avg Bid
    4 bids

    hello I live in a place that has emp jammers being used. and I know they are being made for well for a small price I know there worth . so I'm in need for some one to make it for me and have it disguised in a MP3 player or some thing similar and delivery to me in Australia? please don't respond if your not able to or if its illegal in ur country as that doesn't help me so there's no point telling me lol.. sorry I had many people resopond last time saying all that way if you can produce one off these and get it sent to me with out hick ups then respond to me straight away and only for a cheep price as I know where I can order them for. a couple of hundred dollars so must be much cheeper then that thanks heaps its for demonstration so I can show my partners the way ...

    $117 (Avg Bid)
    $117 Avg Bid
    6 bids

    More details will be provided in direct messages

    $400 (Avg Bid)
    $400 Avg Bid
    1 bids

    Hello i live in australia and own a few pubs that have slots in them with a bunch of friends . And they have asked me to get one made up that will work on all current slots and that is disguisable in a handheld walkman or radio or mp3 player for the demonstration id like it to be hidden if you can garentee me of this and that its garenteed to work and to arrive on time the please hmu

    $129 (Avg Bid)
    $129 Avg Bid
    6 bids

    Develop transmitter and receiver circuit and pcbs for 900MHz radio that takes extremely small amount of current to preserve battery life. Must be designed using discrete components, and not using SIM900 chips. The radio will communicate digital data bits at 1000 to 10000 bits per second, using half duplex. The radio should be able to communicate at a distance of 500 meters or more. The transmitter/Receiver circuit must be developed with USA Fcc requirement in mind. Must be able to pass Fcc tests. Must have in-depth understanding and experience with wireless and antenna technology we need to incorporate this rx/tx radio in our cpu boards. so you will need to build sample demo units, perform testing and give us feedback on the results, send the samples to usa for our own testin...

    $600 (Avg Bid)
    $600 Avg Bid
    24 bids

    I need all editable files and al...Receive configuration commands via socket, usb, sms Sleep module (disables gps and gsm modules until transmission) ; Data required for submission on the platform equipment series Latitude Longitude Speed direction GPS Date (GMT) number of satellites internal battery voltage inform if the module is in fashion loading battery percentage Generate alert in the cases below. low internal battery jammer Panic Required settings On-the-go communication time in seconds communication time stopped server ip Server port Time to sleep in seconds (where 0 does not use active sleep) configure equipment series with 9 digits Payment in 3 steps: 1) After completing the electronic scheme (25 %) 2) After completing PCB(25%) 3) After completing Firm...

    $460 (Avg Bid)
    $460 Avg Bid
    9 bids

    5g 4g 3g LTE GPS WIFI CDMA GSM BLUETOOTH with bubble of 15m to 30m must work for canada

    $2105 (Avg Bid)
    $2105 Avg Bid
    4 bids

    Design a SiK based Telemetry Module, which supports 433Mhz, 900Mhz and 868Mhz ISM bands. Power Tx level : 100mw(20dbm) --500mw(27dbm) Rx sensitivity of -117dbm. Support All features of SiK radio. Should have inbuilt GPS support.

    $289 (Avg Bid)
    $289 Avg Bid
    2 bids

    I am an electronic music producer(Mr Jammer), in the industry since 17+ years. I am coming up with new music releases which are all independent releases where no record label is in play. The whole project will be produced by me including the music, artwork and music video.

    $14 (Avg Bid)
    $14 Avg Bid
    3 bids

    Looking for a skilled person who is capable of making a portable IMSI /IMEI / GSM / 4G LTE Catcher d...meaning, once the unit is activated, it will receive all IMSI data of neighboring Phones and the ability to send sms to every phone number that is received by the device. 1: Unlimited send bulk sms by free cost 2 : The sender can be letters or alphanumeric both 3: Sending speed : up to 1000 sms per minute 4: Customized machine ,no need frequency phone ,no need set ARFCN 5: Support 2G,3G,4G without jammer, 850/900/1800/1900Mhz all frequency 6: Send free sms to all mobile phones within radius 2 KM distance 8: Imei/imsi catcher 9: It can send more than 100 characters in one sms 10:No need to know mobile numbers list advanced 11: SMS broadcaster to all operators cell phone in the...

    $2125 (Avg Bid)
    $2125 Avg Bid
    2 bids

    i need to produce a jammer that producing the jamming signal of 2600 to 2700Mhz with an output power of 20- 30watts and i need all the simulation graphs. (input and output voltage, input and output watt, the time taken to circuit fully function). I need every graph that proves the jamming in success in simulation. It's very urgent. Any experts in wireless and electronic engineering do buzz me. Thank you

    $45 (Avg Bid)
    $45 Avg Bid
    3 bids

    I need to produce a jammer that producing the jamming signal of 2600 to 2700Mhz(4G Band 7) with output power of 20 - 30watts. and I need all the simulation graphs. (input and output voltage, input and output watt, the time taken to circuit fully function). The need to be proof by simulation fully. It's very urgent.

    $40 (Avg Bid)
    $40 Avg Bid
    1 bids

    I need simulation which proofs the circuit producing 4G Jamming signals using 555 timer, adf4351 or arduino an d mixer, amplifier and dc power supply

    $106 (Avg Bid)
    $106 Avg Bid
    3 bids

    I need simulation which proofs the circuit producing 4G Jamming signals using 555 timer, adf4351 or arduino an d mixer, amplifier and dc power supply

    $55 (Avg Bid)
    $55 Avg Bid
    2 bids

    using adf4351, ne555 (timer), or Arduino to generate noise and amplifier. i need to get a simulation and prototype of 4g LTE circuit.

    $40 (Avg Bid)
    $40 Avg Bid
    3 bids

    1. Cambium Networks / Motorola Canopy 9000SMC Connectorized Subscriber Module 900MHz Networks / Motorola Canopy 9000APC Connectorized Access Point 900MHz

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    3 bids

    I want a simulation of this project with Multisim and get a proper functional circuit using the components I've identified. if possible need programming for this 4G LTE jammer using Arduino.

    $47 (Avg Bid)
    $47 Avg Bid
    2 bids

    I want a simulation of this project with Multisim and get a proper functional circuit using the components I've identified. if possible need programming for this 4G LTE jammer using Arduino.

    $45 (Avg Bid)
    $45 Avg Bid
    2 bids

    I want a simulation of this project with Multisim and get a proper functional circuit using the components I've identified. if possible need programming for this 4G LTE jammer using Arduino.

    $110 (Avg Bid)
    $110 Avg Bid
    1 bids

    At present, the micro controller accepts GPS input in and changes the output into a proprietary NMEA sentence, then passes it onto a Digi 900Mhz transceiver. The transmitted signal is received, and the base 18F4520, verifies, decodes, and encodes the output to a Marine AIS message.

    $388 (Avg Bid)
    $388 Avg Bid
    6 bids

    Debug and refine the operation of an existing, 18F4520, software. At present, the micro controller accepts GPS input in and changes the output into a proprietary NMEA sentence, then passes it onto a Digi 900Mhz transceiver. The transmitted signal is received, and the base 18F4520, verifies, decodes, and encodes the output to a Marine AIS message.

    $1055 (Avg Bid)
    $1055 Avg Bid
    9 bids

    To may who be concerned My name is Samantha, and I need help to edit and proofreading my spin off of a DVD .

    $29 (Avg Bid)
    $29 Avg Bid
    15 bids

    I am a private person and I need someone who know arduino to help (teach) me in a couple of projects as a beginner. First project is 433 mhz code grabber. The hel will be as a remote desktom helper.

    $23 (Avg Bid)
    $23 Avg Bid
    5 bids

    ...power using an RMS detector, bandwidth and center frequency of each signal that exceeds the measurement system noise floor by >3dB threshold. o Select the frequency span, resolution bandwidth, video bandwidth/filtering and sweep time to obtain a measurement sensitivity goal of -166dBm/Hz (e.g 3dB signal detectable above a noise floor with 6dB NF, referenced to antenna input) o Sweep the complete 900MHz band in segments and record the power vs frequency outputs. • Post processing: o Filter and discard power measurements that are below the 3dB threshold. o Remove the spatial ambiguity caused by the antenna pattern (the same signal appears on main lobe and side-lobes) to identify the true azimuth angle of arrival. o Tabulate frequency, bandwidth and power of each signal det...

    $1500 - $3000
    $1500 - $3000
    0 bids

    ...power using an RMS detector, bandwidth and center frequency of each signal that exceeds the measurement system noise floor by >3dB threshold. o Select the frequency span, resolution bandwidth, video bandwidth/filtering and sweep time to obtain a measurement sensitivity goal of -166dBm/Hz (e.g 3dB signal detectable above a noise floor with 6dB NF, referenced to antenna input) o Sweep the complete 900MHz band in segments and record the power vs frequency outputs. • Post processing: o Filter and discard power measurements that are below the 3dB threshold. o Remove the spatial ambiguity caused by the antenna pattern (the same signal appears on main lobe and side-lobes) to identify the true azimuth angle of arrival. o Tabulate frequency, bandwidth and power of each signal det...

    $5000 - $10000
    $5000 - $10000
    0 bids

    I want to design a network scenario configuration involving several nodes, gateway, network server in order to generate a packet dataset for classification. The test bed topology will consist of Lora end nodes, jammer, gateway and network server using Ns3 simulator

    $241 (Avg Bid)
    $241 Avg Bid
    3 bids

    ...as a mechanical spotter for free weight barbell exercises etc. My power rack design is aimed to compete with the high-end players, which are either from USA or China. This will be heavy duty and over-engineered for use, but be locally made and have general accessories that are common, but also 3 add-on items that will make this particular product unique in that each piece is designed to be space saving, durable and aesthetically kick ass! I am needing a mechanical engineer who can bring this to life through Solidworks with 3D Modelling and product design skills to help fill the blanks and provide assistance on completing each of these parts, some easier than others. Previous experience with gym equipment design would be a plus, but this would be hopefully a fun ...

    $4851 (Avg Bid)
    $4851 Avg Bid
    38 bids