Ansys cfx flow analysis jobs:
| Project Name | Description | Type | Bids | Avg (USD) | Skill Required | Started | Ends | |
|---|---|---|---|---|---|---|---|---|
| We would like to perform a study for eletrical network load flow analysis and report with suggestions for improved network using ETAP Need some one from someone who has ETAP experience Peoples in Delhi NCR will be preffered. | Fixed | 5 | $925 | Electrical Engineering, Engineering | Aug 25, 2010 | - | ||
| ... freelancer required to perform the dynamic 3D CFD analysis of a 3-phase (oil/ ... and dedicated freelancers knowledgeable in 3D CFD flow analysis need apply. Time wasters do not bid! Bidders must show previous CFD analysis works to be considered. ... | Fixed | 2 | 3ds Max, CAD/CAM, Engineering, Solidworks, Structural Engineering | Jul 1, 2011 | - | |||
| ... freelancer required to perform the dynamic 3D CFD analysis of a 3-phase (oil/ ... and dedicated freelancers knowledgeable in 3D CFD flow analysis need apply. Time wasters do not bid! Bidders must show previous CFD analysis works to be considered. ... | Fixed | 8 | $440 | 3ds Max, CAD/CAM, Engineering, Solidworks, Structural Engineering | Jul 17, 2011 | - | ||
| Fixed | Jun 15, 2010 | - | ||||||
| ... reportComputer Aided Power System Design and Analysis 2 Introduction The ERACS software ... Diagram building and Display (b) Load Flow (c) Fault (d) Harmonic Injection ( ... power network is constructed and Load Flow Analysis is performed. Short circuit ... | Fixed | 3 | $250 | Report Writing | Jan 22, 2011 | - | ||
| ... financial data (balance sheet, income statement, and cash flow statement) for all companies in an index ( ... , create a calculation (such as a Discounted Cash Flow Analysis) based on figures contained within the financial data, and perform the calculation on ... | Fixed | 46 | .NET, C# Programming, Java, MySQL, Visual Basic | Sep 10, 2010 | - | |||
| The test problem in question is a turbulent flow over a 90o bend. The schematic view of the experimental setup comprising of an open-circuit suction wind tunnel system for the 90o duct bend is shown in the figure below. It comprises of a 3.5 m long ... | Fixed | 1 | $250 | Aeronautical Engineering, CAD/CAM, Manufacturing Design, Mechanical Engineering, Mechatronics | Sep 18, 2011 | - | ||
| ... i need someone to provide me with a working case setup in ansys fluent ( setup the case with turbulent parameters since the turbulent ... conditions and create a case setup that i will run on ansys fluent. the setup must produce converged results - i will do ... | Fixed | 20 | CAD/CAM, Engineering, Finite Element Analysis, Mechanical Engineering | Jul 20, 2011 | - | |||
| ... deep specific knowledge of cross-flow blowers and ANSYS CFX simulation to help us optimize the patented design. Before we award the project, we have ... RPM and 1,600 RPM for a given design (IGS format - attached here). We will then ... | Fixed | 3 | $430 | Aeronautical Engineering, CAD/CAM, Engineering, Manufacturing Design, Mechanical Engineering | Jul 28, 2010 | - | ||
| Fixed | Feb 26, 2012 | - | ||||||
| We have complete prepared model in Ansys workbench of one relativly simple assembly with contact problem. We have trouble with onvergence of results, therefore we search a person who will adjust mesh or setting and obtain results of analysis. | Fixed | 8 | $198 | Finite Element Analysis | Feb 18, 2010 | - | ||
| ... in Fluent v12 solving for regional air velocity change and flow pattern. I need airflow analysis of nose. Previous experience with Ansys and airway modeling would be preferred. The 5 surface models have been made in Amira software and is ready for mesh ... | Fixed | 11 | $230 | 3D Rendering, CAD/CAM, Engineering, Mechanical Engineering | Dec 19, 2010 | - | ||
| ... am in need of a project on analysis of connected rod using ansys APDL i need a project on connecting rod withing 10 days everything should be in ansys (mechanical APDL) my requirements are 1)modelling 2)mesh dependecy test ... | Fixed | 8 | $221 | CAD/CAM | Oct 14, 2011 | - | ||
| I'm looking for an pro expert in ANSYS Fluent ( version 12.1 or 13) who has a wide experience in UDF coding and have a quite experience in turbulence modelling as well. the basic idea is to utilize udf to model the anisotropy (nonlinear) turbulence ... | Fixed | 7 | $464 | Aeronautical Engineering, Aerospace Engineering, Finite Element Analysis, Mechanical Engineering | Feb 29, 2012 | - | ||
| Hello, I'm looking for an pro expert in ANSYS Fluent ( version 12.1 or 13) who has a wide experience in UDF coding and have a quite experience in turbulence modelling as well. The main objective is to utilize the udf to model ONLY the anisotropic ... | Fixed | 6 | $498 | Aeronautical Engineering, Aerospace Engineering, C++ Programming, Finite Element Analysis, Mechanical Engineering | Apr 15, 2012 | 17d 4m | ||
| ... varries in each situation) . All the calculations have been done using empirical formulas and they are to be reconfirmed by using ANSYS or ADAMS.. Complete drawing and geometry of axle is also available in PRO E( 2D drawings are also available ). Hence ... | Fixed | 16 | $207 | CAD/CAM, Engineering, Manufacturing, Research | Sep 5, 2009 | - | ||
| Stress analysis of a truck axle using ANSYS and ADAMS | Fixed | 12 | $473 | Finite Element Analysis, Solidworks | May 24, 2010 | - | ||
| ... (CFD). I will provide the 3D cad paraglider model as .prt or an .igs file. The mesh file has to be competebale with ansys fluent 12.1 as I will preform the analysis with this software. Upon completion I will require a .msh file for fluent and a ... | Fixed | 4 | $131 | Aeronautical Engineering, CAD/CAM, Finite Element Analysis, Mechanical Engineering | May 4, 2011 | - | ||
| ... project where you need to build a 15 story building in ANSYS and excite an earthquake motion using transient analysis. For selection purpose, please show me that you are knowledgable with ANSYS by showing me an example of your transient analysis at an ... | Fixed | 5 | $176 | Engineering, Finite Element Analysis, Structural Engineering | Apr 29, 2010 | - | ||
| Trial ANSYS analysis for design firm. Possibility for ongoing orders. Start small, show your talent and secure future orders. | Fixed | 14 | $136 | Finite Element Analysis | May 17, 2010 | - | ||
| ... of ONLY Simpleware, followed by Surfacer and finally, ANSYS I will provide set of .bmp ... to be processed before finally sending it to ANSYS to build up the final model. ... Model analysis will then be done using ANSYS Details need to be as meticulous as ... | Fixed | 3 | $552 | Biotechnology, Finite Element Analysis, Mechanical Engineering, Sports | Oct 3, 2011 | - | ||
| Maximum project budget (150 USD, since i already have the ANSYS Fluent 13.2 case ready). Bid only if you have the skills necessary for the same. I need to design an ejector system which has butane as the primary fluid and air as secondary fluid. I need ... | Fixed | 11 | CAD/CAM, Engineering, Finite Element Analysis, Mechanical Engineering, Scientific Research | Oct 26, 2011 | - | |||
| ... minimum amount of material to meet the specification stated in the attached document. The stress analysis is to be done in Ansys software 3 times for different element types. Please view the attached document for a detailed description and let me know ... | Fixed | 16 | $151 | Engineering, Finite Element Analysis, Mechanical Engineering | Dec 1, 2011 | - | ||
| ... , and you are free to choose a justifiable geometrical configuration. 1. stress analysis calculation 2. ANSYS classic for initial design analysis 3. ANSYS workbench to optimise the design 4. design must meet required consideration for ... | Fixed | 10 | $208 | CAD/CAM, Mechanical Engineering, Product Design | May 7, 2012 | - | ||
| ... the Advanced Simulation Module of NX6, the solid is meshed for finite element (ANSYS) analysis. (4) Effective material properties will be provided. (5) Produce Advanced Simulation output to feed it to ANSYS. | Fixed | 12 | Aeronautical Engineering, CAD/CAM, Finite Element Analysis, Materials Engineering, Structural Engineering | May 26, 2010 | - | |||
| ... am looking for someone who can generate the mesh for a Projectile using Ansys fluent 12.1. I will provide the 3D cad projectile model as ... an .igs file. The mesh file has to be compatible with ansys fluent 12.1 as I will preform the analysis with this ... | Fixed | 16 | $129 | Aeronautical Engineering, CAD/CAM, Finite Element Analysis, Mechanical Engineering | Nov 29, 2011 | - | ||
| ... am looking for someone who can generate the mesh for a Projectile using Ansys fluent 12.1. I will provide the 3D cad projectile model as ... an .igs file. The mesh file has to be compatible with ansys fluent 12.1 as I will preform the analysis with this ... | Fixed | 16 | $160 | Aeronautical Engineering, AutoCAD, CAD/CAM, Finite Element Analysis, Mechanical Engineering | Feb 10, 2012 | - | ||
| I seek to engage a competent analyst who can use ANSYS-Flent to simulate the reaction of a three-blade horizontal wind turbine to air flow. The rotation of the turbine and its velocity is expected to be produced. | Fixed | 10 | $225 | Mechanical Engineering | Dec 30, 2011 | - | ||
| ... , ONE WHO IS SKILLED HERE WILL FIND IT VERY EASY. I HAVE ANSYS WORKBENCH FILE (V 13) FOR 2D FLUENT CONSISTING OF GEOMETRY AND MESH. ... THE SAME. I NEED THIS IN A DAY. I AM ATTACHING THE ANSYS WORKBENCH (V 13) ARCHIVE AND POWERPOINT FILE (WITH DETAILS). IF ... | Fixed | 2 | $100 | CAD/CAM, Engineering, Finite Element Analysis, Mechanical Engineering | Apr 15, 2012 | - | ||
| ... page for "Karman vortex street". I will need the model setup files, I will complete the post processing, I require the model that will achieve a convergent answer, pre-processing completed. I have Ansys v13 with fluent and require compatible files. | Fixed | 4 | $98 | CAD/CAM, Finite Element Analysis | Apr 22, 2012 | - | ||
| Utilize ANSYS CFD to simulated the effects slight changes in speed, and equipment components will make. The equipment is basically a large cylinder 10' diameter, 33' in length (a blender), with 6 inch lifters equally spaced around the inside ... | Fixed | 11 | 3D Animation, 3D Modelling, 3D Rendering, Mechanical Engineering | Nov 7, 2011 | - | |||
| ... Preferred language style: English (U.K.) First of all using ANSYS program. The idea of this project is to produce 3 ... will be attached ---------------------------- Additional information from the client; you can use either ANSYS, NASTRAN for my order | Fixed | 1 | $81 | Engineering, Scientific Research | Dec 28, 2011 | - | ||
| We need a CFX based on the following http://www.cryptosys.net/pki/satmexico.html a licence for the CryptoSys PKI Toolkit will be provided. CFX would be needing aprox the following parameters <CFX_SAT message="this ... | Fixed | 5 | $870 | C Programming, Cold Fusion, Visual Basic | May 14, 2007 | - | ||
| I am working on offshore wind turbine blades with using ansys workbanch 12.can someone please show me how do i start? | Fixed | 4 | $488 | Mechanical Engineering | Jul 8, 2010 | - | ||
| This is more of help on using ANSYS workbench 12.1. I have created two ANSYS project files representing my problem of study. The problem is a cylindrical shaped part consisting of three different bodies. ... | Fixed | 7 | $376 | CAD/CAM, Engineering, Finite Element Analysis, Mechanical Engineering | May 30, 2011 | - | ||
| This is more of help on using ANSYS workbench 12.1. I have created two ANSYS project files representing my problem of study. The problem is a cylindrical shaped part consisting of three different bodies. ... | Fixed | 9 | $2428 | CAD/CAM, Engineering, Finite Element Analysis, Mechanical Engineering | May 30, 2011 | - | ||
| Small project working for an architect company must have knowledge of ansys - to calculate stress on a surface such as brick wall or ... small project and i have spoken to engineers and someone skilled in Ansys this should take them no more then 6 hours. | Fixed | 5 | $34 | Finite Element Analysis | Jun 9, 2011 | - | ||
| ... clouds with optimum number of layers before putting into ANSYS to mesh up using a maximum of 6 ... piece up by adjusting the Y-coordinates in ANSYS into 1 big model. 1) I must ... if all the above can be done in ANSYS alone. 50% completion to be done in 1 ... | Fixed | 6 | $608 | Biotechnology, Materials Engineering, Mechanical Engineering | Nov 9, 2011 | - | ||
| Fixed | Jul 25, 2009 | - | ||||||
| Advantage would be to know ansys. I have small project, I need examples of work (in form of files for program 3ds or ansys 11 or 12 or video showing work). | Fixed | 19 | $422 | 3D Rendering, AutoCAD, CAD/CAM, Civil Engineering, Structural Engineering | May 19, 2010 | - | ||
| ... modelling TASK TWO Mesh Convergence Task 3: Sensitivity Study Must be done in ANSYS. For those who know how to use ansys i know that this is not very difficult project. Should take around 3 days to complete ... | Fixed | 9 | $164 | Finite Element Analysis | Dec 6, 2010 | - | ||
| Simple Ansys Project. Need a simple glass window component created and a wind load stress placed in it. The ... analyzed showing the loads and stress. More information will be given. For an Ansys expert this is a simple 1 day project and i am expecting to ... | Fixed | 9 | $127 | CAD/CAM, Engineering, Finite Element Analysis, Manufacturing Design, Solidworks | Dec 8, 2010 | - | ||
| HI to all i want to have cfd aerodynamic of a car ( Old beetle ) i have some models but there are all ... convert them to iges and sat with mesh to solid program i tried to use ansys , enshight but had no result as i dont know anything from that (i ... | Fixed | 15 | $75 | 3D Rendering, 3ds Max, Aeronautical Engineering, CAD/CAM, Mechanical Engineering | Mar 5, 2012 | - | ||
| ... 5); etc1 7ConclusionsLinked/Integrated with Logical flow; Arising from facts; Brief; etc1 ... 5. Competition. 3 4.6. Competitors Analysis (competitive position within the target ... . Finance: 3 7.7. Cash flow Analysis: 3 7.8. Financial ... | Fixed | 18 | $671 | Business Plans | Mar 23, 2011 | - | ||
| This is work of verity type Data Entry. Example : COMMERCIAL SPRINKLER DATA ENTRY FORM, Real Estate Cash Flow Analysis Assumptions, REAL ESTATE INVESTMENT ANALYSIS Etc | Fixed | 5 | $270 | Data Entry, Data Processing, Excel | Apr 29, 2012 | - | ||
| This is work of verity type Data Entry. Example : COMMERCIAL SPRINKLER DATA ENTRY FORM, Real Estate Cash Flow Analysis Assumptions, REAL ESTATE INVESTMENT ANALYSIS Etc | Fixed | 15 | $325 | Data Entry, Data Processing, Excel | May 1, 2012 | - | ||
| This is work of verity type Data Entry. Example : COMMERCIAL SPRINKLER DATA ENTRY FORM, Real Estate Cash Flow Analysis Assumptions, REAL ESTATE INVESTMENT ANALYSIS Etc | Fixed | 18 | $305 | Data Entry, Data Processing, Excel | May 1, 2012 | - | ||
| Fixed | May 27, 2008 | - | ||||||
| Fixed | Sep 13, 2008 | - | ||||||
| Hi, We are university research team. I am looking for worker for Finite element simulation using ANSYS WORKBENCH. It is for biomedical application. Thank you. | Fixed | 0 | Algorithm, CAD/CAM, Research | Aug 4, 2009 | - |
Showing 1 to 50 of 17570 entries
Featured Projects, identified by a label, attract more bids from accomplished Freelancers than regular projects.
They appear prominently on the front page, listed above all other projects.
Fulltime Projects, identified by a label, enable both Employers and Freelancers to save money by paying no commissions. Additionally it also offers flexibility:
Employers can hire Freelancers on a full time or commission basis, and
Freelancers can bid for projects however they want e.g. hourly, daily, weekly and more!
Private Projects, identified by a label, are recommended when confidentiality is a must for Employers.
They are not visible to search engines and users must be logged in to see them.
Other similar jobs:
ansys stress analysis, stress analysis using ansys, use eracs software diagram building load flow analysis, analysis connecting rod using ansys, load flow analysis etap, flow degree bend ansys, connecting rod project analysis using ansys, connecting rod analysis ansys, ansys cfx report, analysis project mechanical using ansys, report ansys cfx, multiphase flow cfd analysis, ansys udf flow, output load flow analysis matlab, perform load flow analysis etap, load flow analysis using etap, money flow analysis based comparative quantiles, ansys cfx pipe, solidworks flow analysis intake manifold, load flow analysis, load flow analysis matlab, intake manifold flow analysis, ansys shaft stress analysis, pipe ansys cfx, load flow analysis report etap, computer aided power flow analysis, etap load flow analysis, transient flow analysis intake manifold, ansys cfx cfd degree tunnel bend, ansys finite element analysis, , Outsource ansys cfx flow analysis
Top Ansys cfx flow analysis Freelancers
How it works - 5 easy steps
Post your project
in seconds
Compare prices
& select freelancers
Create payment
for the project
Approve
completed project
Release payment
to the freelancer
Post your Project Now!
Post your Ansys cfx flow analysis project FREE!
Get started now - It's quick and easy!