Ansys cfx jobs:
| Project Name | Description | Type | Bids | Avg (USD) | Skill Required | Started | Ends | |
|---|---|---|---|---|---|---|---|---|
| ... deep specific knowledge of cross-flow blowers and ANSYS CFX simulation to help us optimize the patented design. Before we award the project, we have ... RPM and 1,600 RPM for a given design (IGS format - attached here). We will then ... | Fixed | 3 | $430 | Aeronautical Engineering, CAD/CAM, Engineering, Manufacturing Design, Mechanical Engineering | Jul 28, 2010 | - | ||
| ... i need someone to provide me with a working case setup in ansys fluent ( setup the case with turbulent parameters since the turbulent ... conditions and create a case setup that i will run on ansys fluent. the setup must produce converged results - i will do ... | Fixed | 20 | CAD/CAM, Engineering, Finite Element Analysis, Mechanical Engineering | Jul 20, 2011 | - | |||
| This is more of help on using ANSYS workbench 12.1. I have created two ANSYS project files representing my problem of study. The problem is a cylindrical shaped part consisting of three different bodies. ... | Fixed | 7 | $376 | CAD/CAM, Engineering, Finite Element Analysis, Mechanical Engineering | May 30, 2011 | - | ||
| This is more of help on using ANSYS workbench 12.1. I have created two ANSYS project files representing my problem of study. The problem is a cylindrical shaped part consisting of three different bodies. ... | Fixed | 9 | $2428 | CAD/CAM, Engineering, Finite Element Analysis, Mechanical Engineering | May 30, 2011 | - | ||
| Small project working for an architect company must have knowledge of ansys - to calculate stress on a surface such as brick wall or ... small project and i have spoken to engineers and someone skilled in Ansys this should take them no more then 6 hours. | Fixed | 5 | $34 | Finite Element Analysis | Jun 9, 2011 | - | ||
| Fixed | Feb 26, 2012 | - | ||||||
| We need a CFX based on the following http://www.cryptosys.net/pki/satmexico.html a licence for the CryptoSys PKI Toolkit will be provided. CFX would be needing aprox the following parameters <CFX_SAT message="this ... | Fixed | 5 | $870 | C Programming, Cold Fusion, Visual Basic | May 14, 2007 | - | ||
| ... of ONLY Simpleware, followed by Surfacer and finally, ANSYS I will provide set of .bmp ... to be processed before finally sending it to ANSYS to build up the final model. ... Model analysis will then be done using ANSYS Details need to be as meticulous as ... | Fixed | 3 | $552 | Biotechnology, Finite Element Analysis, Mechanical Engineering, Sports | Oct 3, 2011 | - | ||
| ... clouds with optimum number of layers before putting into ANSYS to mesh up using a maximum of 6 ... piece up by adjusting the Y-coordinates in ANSYS into 1 big model. 1) I must ... if all the above can be done in ANSYS alone. 50% completion to be done in 1 ... | Fixed | 6 | $608 | Biotechnology, Materials Engineering, Mechanical Engineering | Nov 9, 2011 | - | ||
| Advantage would be to know ansys. I have small project, I need examples of work (in form of files for program 3ds or ansys 11 or 12 or video showing work). | Fixed | 19 | $422 | 3D Rendering, AutoCAD, CAD/CAM, Civil Engineering, Structural Engineering | May 19, 2010 | - | ||
| ... modelling TASK TWO Mesh Convergence Task 3: Sensitivity Study Must be done in ANSYS. For those who know how to use ansys i know that this is not very difficult project. Should take around 3 days to complete ... | Fixed | 9 | $164 | Finite Element Analysis | Dec 6, 2010 | - | ||
| Simple Ansys Project. Need a simple glass window component created and a wind load stress placed in it. The ... analyzed showing the loads and stress. More information will be given. For an Ansys expert this is a simple 1 day project and i am expecting to ... | Fixed | 9 | $127 | CAD/CAM, Engineering, Finite Element Analysis, Manufacturing Design, Solidworks | Dec 8, 2010 | - | ||
| ... am looking for someone who can generate the mesh for a Projectile using Ansys fluent 12.1. I will provide the 3D cad projectile model as ... an .igs file. The mesh file has to be compatible with ansys fluent 12.1 as I will preform the analysis with this ... | Fixed | 16 | $129 | Aeronautical Engineering, CAD/CAM, Finite Element Analysis, Mechanical Engineering | Nov 29, 2011 | - | ||
| ... am looking for someone who can generate the mesh for a Projectile using Ansys fluent 12.1. I will provide the 3D cad projectile model as ... an .igs file. The mesh file has to be compatible with ansys fluent 12.1 as I will preform the analysis with this ... | Fixed | 16 | $160 | Aeronautical Engineering, AutoCAD, CAD/CAM, Finite Element Analysis, Mechanical Engineering | Feb 10, 2012 | - | ||
| We have complete prepared model in Ansys workbench of one relativly simple assembly with contact problem. We have trouble with onvergence of results, therefore we search a person who will adjust mesh or setting and obtain results of analysis. | Fixed | 8 | $198 | Finite Element Analysis | Feb 18, 2010 | - | ||
| ... (CFD). I will provide the 3D cad paraglider model as .prt or an .igs file. The mesh file has to be competebale with ansys fluent 12.1 as I will preform the analysis with this software. Upon completion I will require a .msh file for fluent and a ... | Fixed | 4 | $131 | Aeronautical Engineering, CAD/CAM, Finite Element Analysis, Mechanical Engineering | May 4, 2011 | - | ||
| Hi, We are university research team. I am looking for worker for Finite element simulation using ANSYS WORKBENCH. It is for biomedical application. Thank you. | Fixed | 0 | Algorithm, CAD/CAM, Research | Aug 4, 2009 | - | |||
| Hi, I am looking for a worker for finite element simulation using ANSYS workbench. The simulation is for human finger touch simulation. Thank you. | Fixed | 0 | Algorithm, CAD/CAM, Engineering | Aug 5, 2009 | - | |||
| Hi, I am looking for a worker for finite element simulation using ANSYS workbench. The simulation is for human finger touch simulation. Thank you. | Fixed | 23 | $1850 | Algorithm, Engineering, Scientific Research | Aug 5, 2009 | - | ||
| ... project where you need to build a 15 story building in ANSYS and excite an earthquake motion using transient analysis. For selection purpose, please show me that you are knowledgable with ANSYS by showing me an example of your transient analysis at an ... | Fixed | 5 | $176 | Engineering, Finite Element Analysis, Structural Engineering | Apr 29, 2010 | - | ||
| Trial ANSYS analysis for design firm. Possibility for ongoing orders. Start small, show your talent and secure future orders. | Fixed | 14 | $136 | Finite Element Analysis | May 17, 2010 | - | ||
| Does anybody here have ability to use ansys to simulate the forces between two charged surfaces. | Fixed | 18 | $443 | CAD/CAM, Electrical Engineering, Finite Element Analysis, Scientific Research, Solidworks | Jul 20, 2010 | - | ||
| ... am in need of a project on analysis of connected rod using ansys APDL i need a project on connecting rod withing 10 days everything should be in ansys (mechanical APDL) my requirements are 1)modelling 2)mesh dependecy test ... | Fixed | 8 | $221 | CAD/CAM | Oct 14, 2011 | - | ||
| ... minimum amount of material to meet the specification stated in the attached document. The stress analysis is to be done in Ansys software 3 times for different element types. Please view the attached document for a detailed description and let me know ... | Fixed | 16 | $151 | Engineering, Finite Element Analysis, Mechanical Engineering | Dec 1, 2011 | - | ||
| I seek to engage a competent analyst who can use ANSYS-Flent to simulate the reaction of a three-blade horizontal wind turbine to air flow. The rotation of the turbine and its velocity is expected to be produced. | Fixed | 10 | $225 | Mechanical Engineering | Dec 30, 2011 | - | ||
| Determine the location and magnitude of the maximum tensile and compressive stresses in each beam using ANSYS and hand calculations | Fixed | 9 | $70 | Finite Element Analysis | Feb 26, 2012 | - | ||
| I'm looking for an pro expert in ANSYS Fluent ( version 12.1 or 13) who has a wide experience in UDF coding and have a quite experience in turbulence modelling as well. the basic idea is to utilize udf to model the anisotropy (nonlinear) turbulence ... | Fixed | 7 | $464 | Aeronautical Engineering, Aerospace Engineering, Finite Element Analysis, Mechanical Engineering | Feb 29, 2012 | - | ||
| Hello, I'm looking for an pro expert in ANSYS Fluent ( version 12.1 or 13) who has a wide experience in UDF coding and have a quite experience in turbulence modelling as well. The main objective is to utilize the udf to model ONLY the anisotropic ... | Fixed | 6 | $498 | Aeronautical Engineering, Aerospace Engineering, C++ Programming, Finite Element Analysis, Mechanical Engineering | Apr 15, 2012 | 17d 4m | ||
| ... page for "Karman vortex street". I will need the model setup files, I will complete the post processing, I require the model that will achieve a convergent answer, pre-processing completed. I have Ansys v13 with fluent and require compatible files. | Fixed | 4 | $98 | CAD/CAM, Finite Element Analysis | Apr 22, 2012 | - | ||
| ... varries in each situation) . All the calculations have been done using empirical formulas and they are to be reconfirmed by using ANSYS or ADAMS.. Complete drawing and geometry of axle is also available in PRO E( 2D drawings are also available ). Hence ... | Fixed | 16 | $207 | CAD/CAM, Engineering, Manufacturing, Research | Sep 5, 2009 | - | ||
| Stress analysis of a truck axle using ANSYS and ADAMS | Fixed | 12 | $473 | Finite Element Analysis, Solidworks | May 24, 2010 | - | ||
| The test problem in question is a turbulent flow over a 90o bend. The schematic view of the experimental setup comprising of an open-circuit suction wind tunnel system for the 90o duct bend is shown in the figure below. It comprises of a 3.5 m long ... | Fixed | 1 | $250 | Aeronautical Engineering, CAD/CAM, Manufacturing Design, Mechanical Engineering, Mechatronics | Sep 18, 2011 | - | ||
| ... :01.f4v'); so.addVariable('streamer','rtmp://s1rl884w3ml245.cloudfront.net:1935/cfx/st'); so.write('mediaspace'); </script> but the ... /01.f4v&streamer=rtmp://s1rl884w3ml245.cloudfront.net:1935/cfx/st/mp4:01&provider=rtmp&autostart=true', ' ... | Fixed | 1 | $31 | Javascript | Nov 13, 2011 | - | ||
| ... -8c87-06c5532ab936 rtmpt://xxxxxxx.cloudfront.net/cfx/st http://site/flow/flowplayer. ... 8c87-06c5532ab936 rtmpt://xxxxxxx.cloudfront.net/cfx/st http://site/flow/flowplayer. ... 8c87-06c5532ab936 rtmpt://xxxxxxx.cloudfront.net/cfx/st http://site/flow/flowplayer. ... | Fixed | 9 | $66 | MySQL, PHP, Software Architecture | Jan 10, 2012 | - | ||
| ... mentioned). You'll find that page here: http://www.27am.com/cfx/ Again, the video was put together directly for her but it ... interested in bidding on this project... see http://www.27am.com/cfx/ PS. This is NOT related to the project that I ... | Fixed | 27 | $55 | Graphic Design, Logo Design | Oct 20, 2007 | - | ||
| ... . We need it finished. Here it is: www.intuition-designs.com/CFX Right now we need a few things. This is a website ... what the site should look like: http://images.intuition-designs.com/CFX Thanks! We're looking to get this taken care of ASAP. ... | Fixed | 3 | $255 | CSS, HTML, PHP, Wordpress | Feb 9, 2012 | - | ||
| ... . We need it finished. Here it is: www.intuition-designs.com/CFX Right now we need a few things. This is a website ... what the site should look like: http://images.intuition-designs.com/CFX Thanks! We're looking to get this taken care of ASAP. ... | Fixed | 11 | $170 | CSS, HTML, PHP, Wordpress | Feb 9, 2012 | - | ||
| I have been provided a sample .exe application (as well as all of the necessary .cpp and .h source files that relate to this app) that contains the code and functionality necessary to perform the AES encryption. The documentation states that the ... | Fixed | 3 | C Programming, Cold Fusion, Perl, Web Security | Jun 30, 2004 | - | |||
| ... the Advanced Simulation Module of NX6, the solid is meshed for finite element (ANSYS) analysis. (4) Effective material properties will be provided. (5) Produce Advanced Simulation output to feed it to ANSYS. | Fixed | 12 | Aeronautical Engineering, CAD/CAM, Finite Element Analysis, Materials Engineering, Structural Engineering | May 26, 2010 | - | |||
| Modelling of three-dimensional analytical model to capture the dynamic behaviour of the model beam. The beams were modelled in detail to capture the dynamic of the structure. The shell elements and beam element were need to utilize to model the composite ... | Fixed | 7 | $191 | Finite Element Analysis, Mechanical Engineering | Jul 12, 2010 | - | ||
| ... that you are outsourcing your projects. We are a group of graduate mechanical engineers. We have a Team of Autocad ,Ansys ,solid works 2011 experts.We can Help you for doing your projects with your required qualifications. We offer you consistency and ... | Fixed | 1 | $10 | Concept Design, Industrial Design, Mechanical Engineering, Product Design, Solidworks | Feb 21, 2012 | - | ||
| structural projet in ANSYS modelling | Fixed | 1 | $30 | 3D Modelling, AutoCAD, CAD/CAM, Solidworks, Structural Engineering | Mar 16, 2012 | - | ||
| ... after 10 days. the project about the Continuously variable transmission (torodial) for the use of a bicycle. softwares should be used like any engineering drawing program and analysis programs like Ansys. the project about 10,000 word. thats all thanks | Fixed | 1 | $400 | Academic Writing, Articles, Report Writing | Apr 14, 2012 | - | ||
| ... Design 3) Drafting 4) Surface design. It is very urgent works must be completed in 10 days .Once the freelancer complete this job. I will also need more tutorials on other soft wares like CATIA,UG,ANSYS etc The freelancer should agree for NDA. | Fixed | 21 | $165 | AutoCAD, CAD/CAM, Product Design | Apr 27, 2012 | - | ||
| ... ' /d 'outputpath' e/ 'outputfilename' f/ 'message' g/ 'password' a coldfusion cfx is more desirable. please refer to this bid if interested: http://www.getafreelancer.com/projects/C-C-Cold-Fusion/CFX-programming.html | Fixed | 7 | $191 | C Programming, Java, Visual Basic | May 14, 2007 | - | ||
| ... , ONE WHO IS SKILLED HERE WILL FIND IT VERY EASY. I HAVE ANSYS WORKBENCH FILE (V 13) FOR 2D FLUENT CONSISTING OF GEOMETRY AND MESH. ... THE SAME. I NEED THIS IN A DAY. I AM ATTACHING THE ANSYS WORKBENCH (V 13) ARCHIVE AND POWERPOINT FILE (WITH DETAILS). IF ... | Fixed | 2 | $100 | CAD/CAM, Engineering, Finite Element Analysis, Mechanical Engineering | Apr 15, 2012 | - | ||
| ... , and you are free to choose a justifiable geometrical configuration. 1. stress analysis calculation 2. ANSYS classic for initial design analysis 3. ANSYS workbench to optimise the design 4. design must meet required consideration for ... | Fixed | 10 | $208 | CAD/CAM, Mechanical Engineering, Product Design | May 7, 2012 | - | ||
| ... choose a justifiable geometrical configuration. 1. stress analysis calculation 2. ANSYS classic for initial design analysis 3. ANSYS workbench to optimise the design 4. design must meet required consideration for service ... | Fixed | 1 | $150 | Mechanical Engineering | May 7, 2012 | - | ||
| ... choose a justifiable geometrical configuration. 1. stress analysis calculation 2. ANSYS classic for initial design analysis 3. ANSYS workbench to optimise the design 4. design must meet required consideration for service ... | Fixed | 1 | $150 | Mechanical Engineering | May 7, 2012 | - | ||
| ... choose a justifiable geometrical configuration. 1. stress analysis calculation 2. ANSYS classic for initial design analysis 3. ANSYS workbench to optimise the design 4. design must meet required consideration for service ... | Fixed | 0 | Finite Element Analysis | May 7, 2012 | - |
Showing 1 to 50 of 85 entries
Featured Projects, identified by a label, attract more bids from accomplished Freelancers than regular projects.
They appear prominently on the front page, listed above all other projects.
Fulltime Projects, identified by a label, enable both Employers and Freelancers to save money by paying no commissions. Additionally it also offers flexibility:
Employers can hire Freelancers on a full time or commission basis, and
Freelancers can bid for projects however they want e.g. hourly, daily, weekly and more!
Private Projects, identified by a label, are recommended when confidentiality is a must for Employers.
They are not visible to search engines and users must be logged in to see them.
Other similar jobs:
ansys, ansys fluent, ansys workbench, ansys stress analysis, ansys past projects, bids ansys, stress analysis using ansys, ansys workbench quarter, ansys fluent mesh, cfd ansys, finite element simulation ansys workbench, ansys workbench piezo, axle ansys, udf ansys, fea ansys, cfd ansys fluent, ansys trial, analysis connecting rod using ansys, ansys beam model, model beam ansys, ansys fluent price, simpleware ansys, ansys connecting rod, wind turbine ansys, pipe cfx, ansys cfx report, report ansys cfx, ansys cfx pipe, ansys cfx cfd degree tunnel bend, pipe ansys cfx, , Outsource ansys cfx
Top Ansys cfx Freelancers
How it works - 5 easy steps
Post your project
in seconds
Compare prices
& select freelancers
Create payment
for the project
Approve
completed project
Release payment
to the freelancer