Gcode lpt jobs
My project demands generation of GCode for CNC machining, targeted towards SolidWorks software. The aim is to precisely work with concrete material. Skills and experience needed include: - Proficient in GCode - Strong working knowledge of SolidWorks - Extensive experience with CNC machines, specifically working with concrete - Proven ability to deliver clean, optimized GCode files. Your main task will be creating the necessary GCode that is aligned to my specifications and ensuring its compatibility with SolidWorks. Any advice towards optimizing the CNC machining process will be appreciated. This project urges precise accuracy to work optimally with concrete, so previous experience in this space is valued.
...request clarification about anything you'd like. My friend can do this work in 10-15 minutes, so please bid reasonably. :) The job is to create tool paths 1) to drill all holes (already done, but please check to make sure I've set it up properly), and 2) create tool paths to remove all materials between bodies. Notes: 1) I have attached the Fusion 360 file I am working with as well as the gcode I have been using (that isn't quite correct). 2) The gaps between bodies are all 6.35mm (1/4"), which matches the tool I am using (). 3) The width of the stock I am using matches the width of the bodies in the file (196.851mm / 7.75"), so no cutting is required except within the confines of the bodies in the file (see rough highlight in attached screenshot). ...
I need a skilled Lua scripter to modify the existing functionality of Mach 4. Specifically, I'm seeking alterations to certain buttons' functions. The details of the changes are as follows: *Spindle on/off lua script changed to Laser On/off Gcode M62 Turn On / M63 Turn Off * Dust On/Off changed to Air on/off Gcode M7/M8 On/off * Spindle percentage power changed to laser power The ideal candidate will have experience with Lua script modifications, specifically with Mach 4. Understanding of control logic and response behavior alteration is required. A thorough understanding of the current functionality of these buttons is needed in order to effectively alter their actions. Crafting the modifications without disrupting the overall op...
Please read Very Carefully The project is V E R Y simple for someone with knowledge I have 2 files in 3mf and GCODE format , They are 3d. The 1st file on one side only has 16x16 = letters The 2nd file on one side only has 16* 8 = letters I want to replace (type over those letters) Nothing else will be changed,, no dimensions no spacing else. So basically what i Need is in the 2 files (FronV2 and Front V3) to have the letters stored in the Frontplatefor matrix letter typed over (Greek Letters) 16x16 Front-V2-EN.3mf 16x8 front-v2-en.3mf Probably the way to work is to import the 3mf file into my CAD program, put a surface on the
I am seeking a freelancer with in-depth knowledge of CNC G-CODE to aid in the development of a unique project surrounding string art. The chosen candidate will possess the following skills and experience: - Strong grasp of CNC Milling Machines - Experience in G-code programming - Familiarity with string art patterns I am looking for someone to help my convert the sequence of nail numbe...seeking a freelancer with in-depth knowledge of CNC G-CODE to aid in the development of a unique project surrounding string art. The chosen candidate will possess the following skills and experience: - Strong grasp of CNC Milling Machines - Experience in G-code programming - Familiarity with string art patterns I am looking for someone to help my convert the sequence of nail numbers into a workable ...
I have an existing 2D spiral-making GCode that is currently used for a delta robot controlled by Arduino. I'm seeking expertise to modify this code in order to not only alter the initial starting point of the spiral, but also adjust its speed and potentially add some extra features. In the current setup, the spiral initiates from the center, but I want the modifications to allow the spiral to start from the perimeter. Your job would also include explaining certain parts of the code to me, enabling me to adjust parameters myself in the future. Ideal skills: - Proficient in GCode for delta robots - Experienced with Arduino-controlled systems - Clear and concise with explanations and instructions - Able to research project documents Application requirements: - Demonst...
Below are the task that needs to do in creating a software 1. Input/output gcode file 2. Plot original gcode file in the UI 3. Automatic/manual (button) smoothing of the overlay line 4. edit the overlay line - mouse right click to add/remove point - mouse left click to reshape both straight/curve line 5. adding lead in/lead out at SP/EP for overlay line 6. Software will have completely interactive UI 7. It will be deployable on windows os
Below are the task that needs to do in creating a software 1. Input/output gcode file 2. Plot original gcode file in the UI 3. Automatic/manual (button) smoothing of the overlay line 4. edit the overlay line - mouse right click to add/remove point - mouse left click to reshape both straight/curve line 5. adding lead in/lead out at SP/EP for overlay line 6. Software will have completely interactive UI 7. It will be deployable on windows os
I am looking for a software developer who can create a standalone desktop application or a web-based application that can convert step files into gcode. The software should be able to feed the gcode to a robot for execution. Skills and Experience: - Proficiency in programming languages such as C++, Java, or Python - Experience in developing software for CAD/CAM systems - Knowledge of robotics and gcode - Familiarity with 3D modeling software and file formats - Ability to work efficiently and deliver the software within a tight deadline If you have a specific robot in mind to use the gcode with, please mention it in your proposal. However, if you don't have a preference, I am open to any compatible robot. Please note that I need the software as soon as p...
...motion of a print, but to stop the extruder motor where the modifier geometry is. currently when adding a modifier, you get the intersecting surface between the modifier and the normal printed object, leaving an unwanted surface. i print with zero infill, and want to print only the shell without no infill. when i use a set number of perimeters, the surface and gcode is clean modelling CAD surfaces produces messy results when exporting gcode, but when i print a solid object with 3-4 perimeters, the result is very clean, however the surface has to be closed loop. I want to print a shell, and turn off the extruder motor only where a modifier geometry intersects the object. i have attached an image showing what i mean. one to show current modifier behaviour and desired beh...
Hi Md. Ashik K., Can you stack the 2 logos George on top of LPT and save as 1 file and send us all formats. Sorry to both you again, but hopefully is easy for you to do.
I am looking for a freelancer to create a CNC file in .STL format for a pistol case that I have a rough sketch or idea for. The pistol case should be medium-sized, meaning between 6-12 inches in length. The finished CNC file should be ready for CNC precision machining. The freelancer should be able...THE TOP SIMPLE ALSO WITH A CUSTOM LOGO LIKE "COLT" OR "TISAS"...OR SOME QUOTE PROBABLY 10 TO 20 WORDS....OR A DROP IN FILE OF A U.S. FLAG THERE WOULD BE CUTOUTS FOR HINGES ON EACH SIDE TO FIT THE TOP/BOTTOM TOGETHER. THE SIZE FINISHED WOULD BE ROUGHLY 10 INCHES x 16 INCHES WITH THE BOTTOM PIECE ABOUT 1.5 INCHES THICK ORIGINALLY..AND THE TOP ABOUT 1.25 INCHES. IF THIS IS SOMETHING YOU CAN DO IN GCODE--SVG--OR STL...PLEASE CONTACT ME Thank you for your time and I loo...
I am looking for a freelancer who can help me create Gcode in Inkscape for my laser cutter. The designs I need are of medium complexity, and I require the Gcode for 1-3 different designs. I want to be taught how to do it as I share my screen over a video call. Skills and Experience: - Proficiency in Inkscape and Gcode generation - Experience working with laser cutters - Knowledge of design complexity and limitations for laser cutting - Attention to detail to ensure accurate Gcode generation for each design If you have the necessary skills and experience, please submit your proposal.
Need a person who is familiar with CNC router and ArtCam software. Who can easily genarate or edit Gcode for our machines
...smaller. so i just need a very basic model that the skirting itself would be wider to accommodate for that bit. it can be in any shape. Dimensions: - the spindle itself (router diameter): 80 mm. - intake for the vacuum 64mm. - the skirting plate that can be put with simple small magnet must be at least roughly 165mm (that is for the skirting or bristles) I just need an STL file so I can create gcode and do it on the CNC. I would 3D print it but it takes for ever usually and its not quite as strong in my opinion. (but if you prove me wrong i might listen to you :-) Again I need something simple as i do not like things when its too complicated. I do not even care if its pretty as long as it works its all I want. here's a few example for you to see but those are for 3d p...
I am looking for a skilled freelancer who can convert Fusion or Tinkercad SVG or STL files to Gcode for my CNC milling machine. The ideal candidate should have experience working with CNC milling machines and be familiar with converting files for Gcode. i have 2 designs i need to make into gcodes so my cnc machine will carve these out. It will be cutting 6061 aluminum 8x 8 x1/4" thick. will be cutting design 1/16 of inch thick. Please quit trying to scam, When you put your price. Honor it! Stop putting $30 then asking 5 times that!! Skills/Experience: - Proficiency in Tinkercad and Gcode conversion - Strong knowledge of CNC milling machines and their operation - Experience working with aluminum - Attention to detail and accuracy in converting files - Ability t...
generating a voxel model which resembles as 3D Printed structure having stair steps and voids. The model should be generated using GCode tool path in MATLAB. The model should look like as-fabricated one. The process to be applied or the model that should get after applying the approach is shown in the below attached files. please go through it. IT INVOLVES MATLAB CODING.
generating a voxel model which resembles as 3D Printed structure having stair steps and voids. The model should be generated using GCode tool path in MATLAB. The model should look like as-fabricated one. The process to be applied or the model that should get after applying the approach is shown in the below attached files. please go through it. IT INVOLVES MATLAB CODING.
...unsure of how to upload photos on the posting I have also been able to successfully print photos. 2. I have downloaded a sample of what quantum enterprises software can do on to my computer. 3. Uploaded the software to Inkscape which is an application that will help convert the project. I will have to use this software to make my project successful 4. Converted the file to svg and then to gcode for the printer to recognize the file. 5. Printed the file- results need improvement 6. I have also used a different software 3d This software works way better and looks good, but it’s not convincing handwriting. The software for quantum enterprises is much more convincing.
...of my business card design. I would like the card to include the following information: - Name Joy Johnson - Job title Realtor - Contact details (phone number and email address) Mobile 540-693-0350 PLEASE DO NOT USE THE CURRENT BACK OF THE CARD/ LOOKING FOR A REDESIGN DO NOT USE THE COLOR GREEN NOR LOGO Please added the following information centered at the bottom of the card" Powered By LPT Realty LLC 1400 International Parkway S #1020 Lake Mary, FL 32746 Samson Properties 14291 Park Meadow Dr Suite 500, Chantilly, VA 20151 Licensed Agent in DC, Maryland, Virginia and Florida The successful freelancer should include potential mock up designs. I have included the front design of the business card for inspiration. There will be NO changes to the front of the card, ...
Client will receive the following: 10x 3Dmodel files for flat glass frames in .stl format according to customer dimensions 5x .svg 2D files of the above models. 20x Gcode files for 2x Ender 3D printers as specified by the customer. Exact measurements to be provided around the 3 week mark on receipt of samples. Files to be delivered within 1 week from delivery of specifications.
Need of code is ready but has issues on simulation.
I need 5 simple items modeled for 3d printing purposes. They are all slightly different. I will need them in svg, stl and gcode (for my printer) if possible.
I am looking for a skilled freelancer who can create a tool path/gcode for my milling machine using Fusion360. I will provide you with the 3d model, you need to create for me a programme for cutting. Very simple but I don't know how to do it.
I am looking for a skilled professional who can generate GCODE for my 3D printer. Skills and Experience: - Proficiency in GCODE programming for 3D printers - Experience with high level of detail 3D printing - Knowledge of creating GCODE for prototyping purposes - I needs this to be sliced for the purpose of 3D printing
Cadmate GCode App Operating System: Windows Develop a Windows Application that scans a specified directory and modifies the files inside based on options set in the application. Items required: - Renaming Files - Moving Files to a different directory - Rename files based on the sub-directory names and move them to the parent directory. - Concatenating files with specific editing requirements: - Option to specify which lines to remove from the beginning of file 1: EG: Remove lines 1;2;3;4;5;6;7;8 - Option to specify to remove the last X number of lines from the end of file 2: EG Remove last 5 lines. - Option to specify a block of text to add between the two concatenated files. - Option to control the name of the concatenated file. - Option to edit the text files with the foll...
...house canopy to drain rainwater, which I can print with my 3D printer (anycube kobra max 40x40). The canopy is 299cm long and 86cm wide. There must be a slope from 0 to 1cm over the length of 299cm. 40cmx40cm panels are to be drawn according to the drawing. It is important to use as little filament as possible to save weight. The plates should not be solid inside, but ducked with grid. As a result, Gcode files are to be passed, which can be printed directly. The successful freelancer must be able to understand my requirements and create a 3D model of the house canopy that meets all the specifications provided. The freelancer also needs to be knowledgeable in the use of Sketchup and CURA, and must be able to demonstrate images of previous 3D modeling and printing projects they ha...
Custom Gcode Sender for CNC Router with User Interface in Java We are looking for a skilled developer to create a custom Gcode sender for our CNC Router. The ideal candidate will have experience in Java programming language and be able to create a user interface for the Gcode sender. Specific requirements for the project include: Auto load on Linux based system - Developing a custom Gcode sender for a CNC Router - Creating a user interface for the Gcode sender - Ensuring error checking is included in the Gcode sender - No specific machining simulation required If you have experience in Java and have worked on similar projects in the past, we encourage you to apply for this project.
Hello. Im interested in recreating this design and would like the build code for it. Im looking to make it using a CNC machine. The machine requires gcode to operate. The planks are 5ft x 12 inches and 5ft x 16 inches. Notice theres a 1 inch boarder around the design. I want it to be identical. The depth of the engravings are .35 inches. The material thickness is .75 inches. The router bit is .5 inches. Please consider all the aspects when designing this. Thank you so much.
I manufacture baseball bats and am in need of CAM/Gcode for the wood lathe to speed up production. I have 2d models of the bats, currently the lathe runs off of DXF files but is slow as it makes stepped passes the full length of the bat on each pass.
I need you to analyze 3D models created using rhino 3D, check meshes, check if slicer outputs as the render, slice files with minimum custom supports, send back 3mf and gcode of everything. Printer presets will be provided
Falcon as 3-D model for 3-print, STL (evt. + GCode) Basic information: Falcons are natural enemies of ravens/crows. A falcon placed in a freshly sown cornfield or sunflower naturally keeps harmful birds from picking the seeds out of the ground as food. 3-D shape Falcon with approx. 100 cm wingspan (min. 70 cm and max. 120 cm), designed in several parts for easy assembly Hardware Ducker: Creality Ender V2 Neo max. build space: 220 x 220 x 250 mm Print: PLA, 0.4 nozzle, 0.12 or 0.16 layer height Version 1 2023 No moving parts Together e.g. with nuts and bolts (e. g. m6 or M8) Version 2 - for season 2024 --> Possibility for upgrade Wings can move up and down (mechanics) Sound support with speakers Assembly, open A file as an idea how I imagine it approximately
Hello I’m looking for a 3d model and toolpath to be created in vcarve pro. These are in the shape of a cricket bat. I can give you measurements and also a previous design used. I have picture examples of what I need Thank you Need copleteted ASAP!!!!!!!!
I'm looking to have a 3D Messi figure created and need both .stl and G-code and .sqlrt formats for the file. There are two photos to sculpt Please let me know if you have experience in 3D printing and are able to provide a file with these specifications.
Creation of path for robotic arms for placement of components in specific patterns. Work with Blockly, Phyton, Gcode.
Creation of path for robotic arms for placement of components in specific patterns. Work with Blockly, Phyton, Gcode.
Hi, do you have experience with freecad api? I need a working script (need to be tested on freelancer pc) which can do the following: -check directory for dxf files - open first dxf file ( dxf file contains always 1 polyline) - use camstyle (diameter bot, speed rate etc) -add holding tabs (auto calculate) -create toolpath based on camstyle and holding tab -create gcode and save in file -delete used dxf file from directory - open new dxf from directory -start process again with new dxf file
I need a working script (need to be tested on freelancer pc) which can do the following: -check directory for dxf files - open first dxf file ( dxf file contains always 1 polyline) - use camstyle (diameter bit, speed rate etc) -add holding tabs (auto calculate) -create toolpath based on camstyle and holding tab -create gcode and save in file -delete used dxf file from directory - open new dxf from directory -start process again with new dxf file I don't have experience with freecad. I only know cambam, but that is difficult to automate. I only interested if you can create script which can do everything what I need and you need to test it on your own system. And you need to make it work on my Windows pc.
I need a script in Cambam or VB/Python which does the follwoing: 1. Read directory and get the first DXF file 2. Open the dxf file 3. Add machine profile to polyline 4. Edit Style machine profile to "laminate" 5. Create toolpath of the polyline 6. Create gcode for polyline and save the gcode 7. Delete the original DXF file 8. Start with 1 until all files are processed.
...help to create gcode for work with snapmaker original. I want to use inventer 2016 hsm so tool library need to be created and tool path Its to modify Hammond enclosure Solid created and provide to you : -stock part solid -modified part solid -holding rig solid -spindle module solid -endmill solid operation step in attach file(open to discution if requiered, ideally should be box,lid,lid,box and try to minimise travel in Z axis but be carefull of clip that hold in place case during machining ) operation 6,7,11,12 drill then small final wall pass since hole is 2.1mm and mill is 2mm or helical milling to avoid plastic chip to say inside hole need to be with only one tool (2x12mm endmill) final project will delivers source file for inventor 2016 hms, instruction to process g...
Need to 3D print the logo on 3D printer. I have the Ender 3 s1 pro. Need either .STL or gcode Logo will need to be 5 inches in height, to store LED lighting inside. 8.5 inches wide. Exactly what is needed:
LAYOUT 1 (Notre Dame de Paris) facade tower height 500 mm (other dimensions are proportional): - the whole building, for printing. Work from all sides. - Mounting holes on the base (reinforced with internal stiffeners) for attaching to an exhibition stand LAYOUT 2 (Notre Dame Cathedral) height 1200 mm, depth 180 mm (other dimensions are proportional): - only a direct view of the facade with the study of the side parts - will be attached to a vertical plane. Mounting holes (reinforced with internal stiffeners) are required at the base of the backrest for attachment to the exhibition stand. At least 6 pieces NOTES: - joints, if possible, choose places for joints that are less noticeable in the future (the size of printed elements can be varied by joints) - internal reinforcement, taking ...
i will create a grasshopper definition that has as input rhino or solidwork geometry that can be sliced into several steps that can reused as a Gcode for 3d printing concrete machine
I have a smalll CAD/CAM project I need both the 3D model and then prepare as a gcode for cnc crouter, I will also need an STL so we can 3D print these This is a very simple project, and using it to find a talented CAD/CAM designer The Successful person will be offerered ongoing work for agreed rates per project units are millimeters fixing holes are 6mm with a 2mm chamfer for CNC the okastic will be HDPE for 3D printer the material will be PETG
We need a program that convert text to g code with special cases any one can help in this
Layer-wise 3D Printing Analysis and Gcode parsing to extract slicer parameters
I need a ms-access script that can do the following - open dxf file in cambam - use machine profile in cambam -create path - export to gcode file My input will be input filename, profile to ise, output filename