You have chosen to sponsor your bid up to a maximum amount of .
The project is to write an embedded software including a web server based on the Freertos and the uIP stack on a NXP LPC2468 based board, the board is a customized board that include a 256 MB SDRAM (ISSI IS42S16160D), 4 GB NAND Flash(Micron MT29F4G08ABADAWP), 8K EEPROM (M24C08) and the IP113S.
the board has two I2C connected and the UART port.
the request is to have the following installed:
- UART boot menu and firmware update.
the board has a Jtag connector, this will be connected to the Jlink pro debugger from Segger and connected to a computer where IAR Embedded workbench IDE (V [url removed, login to view]) is installed, you will have avpn remote remote access to our system for debug and tests.
The webserver should include some common controls such as: username /password authentication, IP address management, GPIO control, System status, Firmware update, load default settings, reset function and backup/restore.
The system should also implement a telnet server, SSH server, SNMP and a dhcp client.
the delivery should be a comprehensive and well documented source code, and a working version on the board.
Also a brief user manual that include all written or edited functions (by the freelancer): name of the functions, input variables, outputs and brief description of the functions.
Some source code is already available (driver for the IP113S), but not tested. other tested such: system init, clock init, SDRAM driver, NAND Flash and UART driver but must be necessary reviewed.
other information could be delivered uppon request after signature of the NDA.