Eagle Solar Charger PCB Routing

Avg Bid (USD)
Project Budget (USD)
$30 - $250

Project Description:
I need components to be placed and a PCB to be routed.

The schematic has been designed and some components have been placed and their position is fixed Some design constraints are as follows:

- All but 2 components are through-hole. As a last resort some of these can be made to be surface mount if there isn't enough room.
- Min track width and clearance is 10mil
- Board will be no more than 2 layer with all components placed on the top layer.
- There will be a ground plane top and bottom.
- Board dimensions are 120 x 54mm.
- There are about 50 passive components, a microcontroller, 3 ICs, 2 relays, 4 DC jacks, 3 mosfets, a fuse and some connectors.

I look forward to reviewing the bids!

Skills required:
Electrical Engineering, Electronics, PCB Layout
Additional Files: SolarCharger_sch.png SolarCharger_brd.png
About the employer:
Public Clarification Board
Bids are hidden by the project creator. Log in as the employer to view bids or to bid on this project.
You will not be able to bid on this project if you are not qualified in one of the job categories. To see your qualifications click here.

$ 150
in 5 days
$ 200
in 3 days
Hire vasana18
$ 140
in 10 days
$ 66
in 3 days
$ 70
in 7 days
Hire guerila
$ 220
in 3 days
$ 154
in 4 days
$ 102
in 1 days
$ 55
in 2 days
$ 82
in 5 days