You have chosen to sponsor your bid up to a maximum amount of .
Small PCB Layout & Supply 50 Bare Boards
This is for the layout of a small, double sided PCB and the supply of around 50 bare boards.
It’s a simple battery powered microcontroller circuit with few components and no particularly critical layout requirements. Some consideration may be needed for a pulsed 50-100 mA LED supply.
A clear HAND DRAWN circuit diagram will be supplied scanned into electronic PDF format. Any critical layout requirements will be identified.
There are about 20 components: 1 x 8 pin SM SOIC, 6 x 0805 R’s, 2 x 0805 C’s, 2 x SM tant caps, 1 x SM LED, 2 x larger SM LED’s, 1 x push button, 1 x SOT 23 MOSFET, 1 x crystal/resonator, 1 x coin cell holder, 6 way header. The final list may be very, very slightly different.
Data sheets will be provided for all components.
Board dimensions are a simple square/rectangular approx. 30mm x 25mm without any cut-outs or odd shapes. A clear HAND DRAWN sketch (PDF) will be provided showing the actual required board dimensions, the required location of cell holder, button and LEDs, and any no-go areas. GENERALLY, through hole/large components will be on the top, SM components on the bottom.
The manufactured boards need only to be about 1mm thick (feel free to recommend alternatives if this saves cost), tin plated, with solder mask. Component layout/designators are not necessary if this saves cost.
PCB manufacturing package in a ‘common’ format delivered electronically
50 (or thereabouts) bare PCB’s as individual boards or break-out panel INCLUDING delivery to UK.
Optionally, feel free to quote for 100 off & 500 off future boards.
Let me know when and how you require payment.
Delivery of the PCB manufacturing package and boards would be required within 4 weeks of supplying the necessary information. Let me know if you need longer to allow for low cost shipping.