You have chosen to sponsor your bid up to a maximum amount of .
A simple 3 port switch is required 10/100 or 10/100/1000 if possible. Power supply to be 30V to 12V. For connnections RJ45 sockets are required for two of the ports and the third port to be a cable with an RJ45 plug.
Components are to be easily obtainable in the UK, project consists of circult design, board layout for test.
Additional Project Description:
02/24/2013 at 17:38 GMT
The RJ45 sockest should have built in activity and connection LED. On the PCB next to the sockets should be activity and status LED for the cable based port.
The regulator for the supply should be able to handle the full range between 10V and 30V. The supply will be nominally either 12 or 24 V.
There should be a resettable polyfuse in line with the supply mounted on the PCB.
All components must be capable of being sourced from the UK, preferred distributors are Farnell, Radiospares or similar
The PCB should be as small as possible, the two RJ45 side by side and the cable port with the RJ45 plug should exit behind the two RJ45 sockets.