3D Modeling Reverse Engineering Scanned Data - Surfacing
Project ID:
568229Project Type:
FixedBudget:
$30-$250 USD
Project Description:
We need a professional 3D modeller who has experience in reverse engineering of scanned data.We have scanned a cast component which is in a .ssl file that needs very accurately re modelling to get smooth surfaces for tooling. As long as we can open the new component in SolidWorks and see the scanned verses the new component overlapping each other we can check for the accuracy. We have many components like this so need to find professional quality people for the future work.
Picture Attached
BMSDesignLtd . c0.
uk
Skills required:
3D Rendering, CAD/CAM, Engineering, Home Design, Solidworks
Public Clarification Board
7 messages
-
anilhb72
Hi,
I am a Mechanical engineer located in Bangalore, having 14 yrs of experience in Product design, Tool design, 3D Solid & Surface modelling, Reverse Engineering with Strong Mould tools and Stamping tool design back ground. I am using softwares like Catia V5, Solidworks, Pro-E and Auto cad. Having multicultaral work expereience in Malaysia, Indonesia, Finland with American and uropean custgomers as well.
Hope to hear from you soon.
Regards
Annappaover 2 years ago
-
cosmo145
Hi,
Would it be possible for you to post the file so I can give you an accurate bid on the project.over 2 years ago
-
harmeetsingh25
Hi,I am a professional designer.
As you can see that i have experience in converting scan data into high quality surfaces.
That surface is ready for manufacturing.
I hope we can work together on this & many more to come.over 2 years ago
-
chander1980
Dear Sir,
I m experienced person in this type of work.
waiting for response
regards
Chander Shekharover 2 years ago
-
bluepixeljo
hi sir, i need to know that you looking for only 3D CAD/CAM artist or
any good 3D modeller who know other 3D software like MAYA or
MAX.Coz its a engineering work thts why i m asking for.
Thanks.over 2 years ago
Awarded Bids
All Bids ()
arfian
|
arfian
From Indonesia
Offline
|
General Freelancer Orientation (85%, 95th percentile)
$250
in 10 days
over 2 years ago
Hi,.
Check PM please
Regards,...
Please check pm for details
dezignsolutions
|
|
dezignsolutions
From India
Offline
|
Foundation LimeExchange Member
$200
in 5 days
over 2 years ago
Dear Sir,
We have experience on reverse engineering. We can do it for you.
Thanks
ivantotspaul
|
|
ivantotspaul
From Philippines
Offline
|
Foundation Freelancer.co.uk Member
$200
in 5 days
over 2 years ago
Hi, i would like to work on your or project sir. i am a experienced mechanical engineer and have worked in 3D modeling and surfacing for quite some time. please leave a message if interested. thanks.
wwfreelancers
|
|
wwfreelancers
From Turkey
Offline
|
Foundation EUFreelance.com Member
$50
in 20 days
over 2 years ago
I am a Mechanical Engineer having more than 10 years of 3D modelling experience of using Inventor and Catia.Hope we can get the chance to work together.
sorinfuzfa
|
|
sorinfuzfa
From Romania
Offline
|
Foundation EUFreelance.com Member
$100
in 1 day
over 2 years ago
i work with unigraphics nx5
anilhb72
|
|
anilhb72
From India
Offline
|
Foundation EUFreelance.com Member
$100
in 10 days
over 2 years ago
Hi,
I am having 14 yrs of expereience with Tooling back ground. Please have look at PM for more details
kumarsolutions
|
|
kumarsolutions
From India
Offline
|
Foundation EUFreelance.com Member
$180
in 10 days
over 2 years ago
we KumarSolutions CAD/CAM/CAE consultancy services, KumarSolutions is a complete CAD/CAM/CAE solution provider was established in January 2006. The operations in Pune provide
high quality, cost effective Design soluti... more
we KumarSolutions CAD/CAM/CAE consultancy services, KumarSolutions is a complete CAD/CAM/CAE solution provider was established in January 2006. The operations in Pune provide
high quality, cost effective Design solutions to clients in India. KumarSolutions has the capability to draw
upon the successful Management and technical expertise of senior professionals having wide spectrum of
industrial experience. KumarSolutions offers solutions & services in the areas of,
CAD/CAM/CAE counsultant,
Product Design,
Corporate training,
Web Design and Devlopment
for more details about us please visit our website www.kumarsolutions.co.in less
Hi,
I am a Graduate in Mechanical Engineering and am proficient in CATIA, Pro/E, AutoCAD and SolidWorks softwares.
I can do this in a shortest turn-around.
Regards,
N.Kandaswamy
amalsudeera
|
|
amalsudeera
From Sri Lanka
Offline
|
Foundation EUFreelance.com Member
$30
in 1 day
over 2 years ago
i am a mechanical engineer who has experienced in solid works.
i can get ur job done within specified period.
let me know if u r interested.
thnx,
I will need a little more information, but will be able to complete job in 3 days. If I have all the proper information.I have exstensive experience in reverse engineer items. I have the ability to fully assemble redes... more
I will need a little more information, but will be able to complete job in 3 days. If I have all the proper information.I have exstensive experience in reverse engineer items. I have the ability to fully assemble redesign and enhance existing products from a 2D picture into a fully finctioning Supeior item. I have many machines and parts I have built from 2D drawings. less
We have good experiance for this work so please give us one chance.
ionels
|
|
ionels
From Romania
Offline
|
Foundation LimeExchange Member
Foundation EUFreelance.com Member
$30
in 2 days
over 2 years ago
Hi! I am interested! I a Mechanical Engineer and proficient in CATIA V5 and Solidworks 2008. Please check the PM for the skill proof.
RRegards
Ionels
Kindly send the Input coordinates Data Files.
Just give me a chance for trial.
Whatever I do always Zero, Zero - Perfect.
harishhalkarni
|
|
harishhalkarni
From India
Offline
|
Foundation EUFreelance.com Member
$30
in 1 day
over 2 years ago
sir currently i am working on solid works, i think i can do this please provide me further details.
cdumitru
|
|
cdumitru
From Romania
Offline
|
Foundation EUFreelance.com Member
$100
in 5 days
over 2 years ago
Hello, Please see PMB.
Best regards
CD
Hy,
I have graduated Universiti Politehnica of Bucarest, mechanical department, and I can work in solidworks.I`m curious about your projet even I`ll not be payed.
Thanck you.
Please, check pm for more details. Thanks
Hello I saw your project proposal and would like to offer my services. I have been in product development for over 15 years working with all kinds of digital data, specifically scan data. Bringing in scan data into S... more
Hello I saw your project proposal and would like to offer my services. I have been in product development for over 15 years working with all kinds of digital data, specifically scan data. Bringing in scan data into SW can be tricky as SW will only allow you to bring in so many points (triangles). Usually I have to decimate the scan data down to bring it in. I know how to do this type of work intimately.
I look forward to hearing from you,
Stuart less
Hello,
Please provide either point cloud or surfaced data for a more accurate complete quote.
All work to be done in Solidworks 2009.
NDA available if required.
please contact me for more details. I look forwa... more
Hello,
Please provide either point cloud or surfaced data for a more accurate complete quote.
All work to be done in Solidworks 2009.
NDA available if required.
please contact me for more details. I look forward to talking and working with you in the near future.
Existing sample projects of scanned data available upon request.
Thank you for your time,
Terry Traser
Owner/CEO
TRASER DESIGN INC.
less
Dear sir,
I have a lot of experience in this type of work..
Please check PM for more details.
presolutions
|
|
presolutions
From India
Offline
|
Foundation LimeExchange Member
$210
in 4 days
over 2 years ago
Dear Sir:
I am responding to your advertisement Get-freelasncer. If required I eill enclose my resume showing my education, experience, and background.
I have over 7 years experience in the Design Engineering, Pro... more
Dear Sir:
I am responding to your advertisement Get-freelasncer. If required I eill enclose my resume showing my education, experience, and background.
I have over 7 years experience in the Design Engineering, Project Management and Team Management.
Totally I have experience as follows:
ü Handling entire gamut of task pertaining to drawings study, Modelling, Sheetmetal Modelling, Detailing, Solid Modelling and Assembly Design.
ü Developing the conceptual design of new products entailing drawings & specification study, quotation enquiry study & finalization, vendor selection & finalization, schedule for development, first sample approval, tool modification and final part approval.
ü Designing the product to meet customer requirement & translating the design model using various tools.
ü Core Cavity extraction and electrode planning.
ü Reviewing the engineering / design changes & resolving quality related problems associated with design.
ü Final checking and release of engineering drawings for the development.
ü Designing of cutting plan for the product.
ü Creating drawings to the various departments for the mass production.
ü Coordinating with Production Department for improving quality of the product.
ü Developing design procedures to test existing products and equipment to identify areas for improvement.
ü Recommending changes to existing products and equipment to improve specifications and performance.
ü Training company staff in the operation and maintenance of products and equipment.
May I arrange an interview to further discuss my qualifications? I am available for an interview at a mutually convenient time.
Thank you for your time and consideration.
Sincerely,
Karanam
less
radekear
|
radekear
From Poland
Offline
|
Foundation EUFreelance.com Member
$150
in 1 day
over 2 years ago
Hi
I need 1 day max to make model
2nd day to repair if you dont like something
Hi Sir,
Good day!
Please see PM.
Thanks!
pcozma
|
pcozma
From Romania
Offline
|
Foundation EUFreelance.com Member
$150
in 3 days
over 2 years ago
I am mechanical design engineer. I have 20 years of experience in design and 10 years in CAD design.
Thanks
parallaxe
|
parallaxe
From Canada
Offline
|
Foundation EUFreelance.com Member
$100
in 14 days
over 2 years ago
Dear Sir:
I am an industrial designer with more than 15 years experience in 3D CAD modeling. I have previous work examples in reverse engineering of molded parts. Please contact me directly for more information.
... more
Dear Sir:
I am an industrial designer with more than 15 years experience in 3D CAD modeling. I have previous work examples in reverse engineering of molded parts. Please contact me directly for more information.
I am very interested in helping you in this project. I would like to propose a more precise bid, but I will need more information on the part complexity level. Please contact me directly for we can exchange informations.
I am expecting your answer and I hope to be able to help you on this project. Meanwhile, if you have any questions about our services, please don't hesitate to contact me. Thank you and best regards,
less
I can do this for you, check PMB