LED Control System, Hardware & Software/Firmware
Project ID:
739015Project Type:
FixedBudget:
$250-$750 USD
Project Description:
Hi, I have worked on lot of Microcontroller based projects. I have worked on LED based products like LED display boards. I am giving a tentative estimate of $1100 and 60 days to complete.But I will be able to give exact figures after you provide details.Thanks and Regards
vinoth ganesh.S
Skills required:
Electronic Forms, Electronics, Embedded Software, Medical, MicrocontrollerPublic Clarification Board
4 messages
-
sherazi11
although its in the project section it seems to be a bid.... if it was a project it should have some details of project.... i would ask u to place details if its a project
over 1 year ago
-
nithinben
Mr vinod genesh
Im an embedded engineer from Cochin,Kerala. I would like to assist you with this project, but please be more specific on what your exact requirement is so that i can work out the results accordinglyover 1 year ago
-
zoxno6
Respected vinothganesh,
I have lot finished PIC MCU based project too.Give me more information about your project and I will give best bid to you.
Mr. Zoran Milenkovic,Serbia.over 1 year ago
Awarded Bids
All Bids ()
geobabu
|
geobabu
From India
Offline
|
Foundation EUFreelance.com Member
$750
in 60 days
$225 Milestone Requested
$225 Milestone Requested
over 1 year ago
Hi,
We are a design house based in Bangalore handling the design and development of the embedded systems. It will be very helpful if you provide some additional information regarding this requirement. According to ... more
Hi,
We are a design house based in Bangalore handling the design and development of the embedded systems. It will be very helpful if you provide some additional information regarding this requirement. According to that We can offer a solution .
Regards,
Geo less
rajeshmittal
|
rajeshmittal
From India
Offline
|
$500
in 60 days
$300 Milestone Requested
$300 Milestone Requested
over 1 year ago
Hi,
I have 2 year of experience in Embedded Systems Development on platforms- AVR studio , in C language and I also have extensive handon experience on ORCAD tools like Schematic designing , and PCB designing in la... more
Hi,
I have 2 year of experience in Embedded Systems Development on platforms- AVR studio , in C language and I also have extensive handon experience on ORCAD tools like Schematic designing , and PCB designing in layout.
I look forward to talking with you regarding this application and to answer any questions you may have.
Thank you very much for your consideration.
Rajesh Kumar
9914788925
less
manishingale2000
|
manishingale2000
From India
Offline
|
Foundation EUFreelance.com Member
$500
in 25 days
$200 Milestone Requested
$200 Milestone Requested
over 1 year ago
Hi Vinod,
We are working in embedded systems from last 12 years and we are very sure to give you correct solution.
Please provide us more details going forward.
Thanks,
manish
Hi dude please check pmb for detail..
Sir,
I am having a strong team of experienced Engineers, we can do this job for you.
Both, time and bid are Negotiable.
would love to work for you.
Thanks
szlmcrtl
|
szlmcrtl
From Bangladesh
Offline
|
Foundation EUFreelance.com Member
$400
in 90 days
$120 Milestone Requested
$120 Milestone Requested
over 1 year ago
Hello I am a mechanical engineer working with microcontroller for 3 years.
I did 89s, 89c, series with also AVR series for ex avr8,avr32,I am also ready to do with PIC microcontroller. Tell me what to do.
vijayraviramkuma
|
vijayraviramkuma
From India
Offline
|
$500
in 20 days
$200 Milestone Requested
$200 Milestone Requested
over 1 year ago
We are the team of 15 R&D engineer,we can develope the project as per your require.
- Bachelor of Engineering (HONS) Electronic Engineering
- Master of Engineering Science (in progress)
- 2 year experience in PCB layout and Micro-controller programming
- Familiar with Visual Basic, C, C++, C# and e... more
- Bachelor of Engineering (HONS) Electronic Engineering
- Master of Engineering Science (in progress)
- 2 year experience in PCB layout and Micro-controller programming
- Familiar with Visual Basic, C, C++, C# and etc. programming languages.
- Able to work on some engineering software, such as Matlab, Multisim, Autocad and etc. less
I usually work on Microcontroller 8051, AVR, PSOC, PIC,... based projects too. I sometimes work on FPGA projects. I have successfully built the electronic information table based on LED matrix. I am looking forward to ... more
I usually work on Microcontroller 8051, AVR, PSOC, PIC,... based projects too. I sometimes work on FPGA projects. I have successfully built the electronic information table based on LED matrix. I am looking forward to working with you less
MuthulakshmiCS
|
|
MuthulakshmiCS
From United States
Offline
|
$300
in 10 days
$45 Milestone Requested
$45 Milestone Requested
over 1 year ago
Need project details
I will complete this project immadiatelly
montronics
|
montronics
From India
Offline
|
Foundation EUFreelance.com Member
$500
in 40 days
$250 Milestone Requested
$250 Milestone Requested
over 1 year ago
we can provide you PCB designing, Manufacturing (metal cald PCB also) and assembly work.
vidyadhardeo
|
|
vidyadhardeo
From India
Offline
|
$400
in 40 days
$120 Milestone Requested
$120 Milestone Requested
over 1 year ago
Hi,
I am an engineering student.I have good experience in the field of micro controller programming & system design.I am an ametuer, but, would surely like to work for you.It's not only for money, also for gaining... more
Hi,
I am an engineering student.I have good experience in the field of micro controller programming & system design.I am an ametuer, but, would surely like to work for you.It's not only for money, also for gaining more experience in this field. less
i am electronic engineer. i do many project aboat LED Sign Boards & EQMS systems
After receiving the advance and the project details we'll send you the design.Once it is approved we'll design the hardware in case there is no existing hardware to your side we will then send you the report and after ... more
After receiving the advance and the project details we'll send you the design.Once it is approved we'll design the hardware in case there is no existing hardware to your side we will then send you the report and after your approval the project will be delivered in the days mentioned above. less
gencosoftware01
|
|
gencosoftware01
From United States
Offline
|
Foundation LimeExchange Member
$1000
in 60 days
$200 Milestone Requested
$200 Milestone Requested
over 1 year ago
I am an experienced embedded software and electronic engineer. I specialize in freescale microcontrollers and have various demo boards that can speed development.
I also have worked with ethernet enabled microcontrol... more
I am an experienced embedded software and electronic engineer. I specialize in freescale microcontrollers and have various demo boards that can speed development.
I also have worked with ethernet enabled microcontrollers that can be a plus for end customer control. They can access an embedded webserver to modify system parameters.
I can provide you with source code, firmware, gerber files, BOM, etc.
We can discuss details when you want.
I haved built many microcontroller based devices, like an RFID based vehicle tracking system with embedded GSM modem to send data to a server over the Internet, a GPS device with GSM, a house lights controller via IP. a vending machine controller, etc.
Please do not hesitate to ask any question. I am very interested in working with you with this project.
less
hi. i m currently in final year of my BE electronics and have a lot of experience in microcontroller based systems specially AVR microcontrollers.
please share more detail of this project so that i can give u the est... more
hi. i m currently in final year of my BE electronics and have a lot of experience in microcontroller based systems specially AVR microcontrollers.
please share more detail of this project so that i can give u the estimation of completion time. less
I have a good stuff in LED n microcontroller based projects...
Done several projects successfully..
Dear sir ..
I worked in this field since 2000
just give me details and we'll start .
Waiting
dimitech
|
|
dimitech
From Australia
Offline
|
Digital Electronics Level 1 (78%, 93rd percentile)
$1000
in 45 days
$250 Milestone Requested
$250 Milestone Requested
over 1 year ago
I would like to discuss details with you.
sandeepdeepu
|
|
sandeepdeepu
From India
Offline
|
$550
in 50 days
$220 Milestone Requested
$220 Milestone Requested
over 1 year ago
Hello sir,
First thing i want to mention is ur requirements are not clearly mentioned in the project so, i can't properly decide on time payment etc.We are a club of robotic Hobbyist with specific set of people with ... more
Hello sir,
First thing i want to mention is ur requirements are not clearly mentioned in the project so, i can't properly decide on time payment etc.We are a club of robotic Hobbyist with specific set of people with skills in Mechanical and electrical designing.I will design PCB'S on Eagle.I am an expert in microcontroller coding too.U may check out my blog on micro-controller coding on www.microcontrollerfundaes.blogspot.com .This blog is right now under construction it will be ready in 4-5 days.
U can also check out website of our club I-bot .www.ibot.iitm.ac.in/beta.
We can help u both in mechanical and mutomated design.U can contact me on my gmail account deepu730 with in-depth details of ur project .We can cut out deals there it self.I am a student of IIT madras/india . less
I have more then 7 year experiance on microcontrollers and analog electronics, PCB design manufacturing, microcontroler interfacing and programming isnot a probem for me. Please do provide more details.
tc
In my bid are not included the price for pcb and the components.
Hi iam an expert since 20 years at Microcontrollers,Layout ec..
best regards W.O
ss24
|
|
ss24
From India
Offline
|
Foundation LimeExchange Member
$270
in 50 days
$68 Milestone Requested
$68 Milestone Requested
over 1 year ago
I'm embedded software professional having 8 yrs of exp. kindly let me know what the project is.
both bid price and initial milestone are negotiable...i would like to mention that i am a deisgn and development engineer at a Firm in Oman, and i have done lots of projects here and have the ability to complete any so... more
both bid price and initial milestone are negotiable...i would like to mention that i am a deisgn and development engineer at a Firm in Oman, and i have done lots of projects here and have the ability to complete any sort of project, I have a well maintained Lab, and resources....
i would like you to plz. give me some details .... less
MikiNoel
|
|
MikiNoel
From Romania
Offline
|
Foundation EUFreelance.com Member
$2000
in 45 days
$500 Milestone Requested
$500 Milestone Requested
over 1 year ago
Hello. pls. see details in the PMB. Best Regards. Miki
chk my profile
lexa001
|
|
lexa001
From Estonia
Offline
|
Foundation EUFreelance.com Member
$700
in 60 days
$105 Milestone Requested
$105 Milestone Requested
over 1 year ago
I have 10 + years experience microcontroller devices and control systems, LED displays, LED lighting devices. Offer services for the development Schematics, printed circuit boards, software for various microcontrollers... more
I have 10 + years experience microcontroller devices and control systems, LED displays, LED lighting devices. Offer services for the development Schematics, printed circuit boards, software for various microcontrollers.
I ask for details of the project. less
Extensive experience in assembly languages, CAD, hardware and firmware debugging +-20yrs
paulm10
|
paulm10
From United States
Offline
|
$1000
in 40 days
$100 Milestone Requested
$100 Milestone Requested
over 1 year ago
Please see PMB..
simpic
|
|
simpic
From United Kingdom
Offline
|
US English Level 1 (100%, 100th percentile)
$700
in 60 days
$210 Milestone Requested
$210 Milestone Requested
over 1 year ago
I work with the Microchip PIC microcontroller and I have experience with display work. i will be glad to help up recieveing more detailed information.
I am making projects for engg. students.I will do it well.Please provide further details.
lalumanthottam
|
|
lalumanthottam
From India
Offline
|
$400
in 10 days
$80 Milestone Requested
$80 Milestone Requested
over 1 year ago
I have 2+ experience in working on National Instruments MULTISIM developing various embedded projects. with regards lalu
See details in Mb.
Check mi profile in Linkedin:
http://ar.linkedin.com/pub/federico-mart%C3%ADn-salguero/12/617/427
I have great experience in microcontroller design and VHDL FPGA design, wich may fit your project.
gaitan
|
|
gaitan
From Serbia and Montenegro
Offline
|
$700
in 50 days
$350 Milestone Requested
$350 Milestone Requested
over 1 year ago
Please check Your pm, thanks.
raimond
|
|
raimond
From Romania
Offline
|
Foundation EUFreelance.com Member
$500
in 60 days
$100 Milestone Requested
$100 Milestone Requested
over 1 year ago
Hi, you seem that you posted a bid as a project :-) Anyway, if it's not the case, and you want an 8051, AVR, or ARM micro in your project, you can contact me,
Best regards,
we are working with microtontroller projects for 7 seven years.we can show our work .PM for further detail.
abhitandon241080
|
|
abhitandon241080
From India
Offline
|
$350
in 7 days
$11 Milestone Requested
$11 Milestone Requested
over 1 year ago
please mail and provide information