Freelancer

Micro-controller FFT Display  

Micro-controller FFT Display is project number 724343
posted at Freelancer.com. Click here to post your own project.


 

Status: Awarded

Selected Providers: gencosoftware01

Budget: $750-1500

Created: 06/28/2010 at 0:52 EDT

Bid Count: 48

Average Bid:
$ 1170

Ends: 08/12/2010 at 0:52 EDT

Project Creator: dflevin United States
Employer Rating: (No Feedback Yet)

Bid On This Project
 

Description

Need C code to perform the following operations:

1) Digitize an analog voltage input using a micro-controller and perform FFT operation
2) Transmit data wirelessly to a PC
3) Display continuously digitized waveforms on a PC in real time – e.g. display a frequency distribution

There will be some leeway in the hardware and software used. Micro-controller will likely be in the TI MPS430 family. Need a programmer who can put together a hardware and software visualization package (preferably an open sourced display program) as efficiently as possible.

Messages Posted:6 View project clarification board Post message on project clarification board

Bid On This Project
 

If you are the project creator or one of the bidders Log In for more options

 

1100

-

30 days

Fri, Jul 23


can do it... wireless will be WIFI.
help

 

1000

25% ($250)

15 days

Sat, Jul 3


I can definitely proivde you the requested service.Thanks
help

 

1500

10% ($150)

45 days

Mon, Jun 28


Hi, I have done a lot of data loggers project based on microcontroller and having interfacing with PC. We expertise in TI MSP430, mic...more
Hi, I have done a lot of data loggers project based on microcontroller and having interfacing with PC. We expertise in TI MSP430, microchip, atmel and microsoft visual studio. We can use Nordic NRF series wireless devices. We can communicate upto 100mtrs. What is the maximum bandwidth of the signal to be digitized? I have 25yrs of experience in embedded harware, FFT displays, microcontrollers, C, FPGA, VHDL and wireless technologies. Thanks, Amit world wide web dot designlabsindia dot com
help

 

1250

50% ($625)

75 days

Tue, Jun 29


I am professional automation engineer with 33 years of experience,See MB Regards Brajesh
help

 

1500

10% ($150)

45 days

Mon, Jun 28


Hi Please check your PMB. Thanks
help

 

1300

30% ($390)

45 days

Mon, Jun 28


Hi, Our experienced team is handling the design and development of the embedded systems using various microcontroller families. We are ...more
Hi, Our experienced team is handling the design and development of the embedded systems using various microcontroller families. We are interested with this project and will able deliver the solution according to your requirement. Hope for your reply. Regards, Geo
help

sbk Turkey

 

1245

-

30 days

Mon, Jun 28


please check your pbm
help

 

1200

20% ($240)

30 days

Mon, Jun 28


please contact us, we can finish this kind job well, thanks
help

 

1500

30% ($450)

45 days

Mon, Jun 28


Please, see your PMB.
help

 

1200

-

30 days

Tue, Jun 29


please check your inbox for details.
help

 

1250

60% ($750)

25 days

Mon, Jun 28

(No Feedback Yet)


See details in MB.
help

 

1500

-

60 days

Mon, Jul 26

(No Feedback Yet)


I am an experienced embedded software and electronic engineer. I specialize in freescale microcontrollers and have various demo boards that ...more
I am an experienced embedded software and electronic engineer. I specialize in freescale microcontrollers and have various demo boards that can speed development. I also have worked with ethernet enabled microcontrollers that can be a plus for end customer control. They can access an embedded webserver to modify system parameters. I can provide you with source code, firmware, gerber files, BOM, etc. We can discuss details when you want. I haved built many microcontroller based devices, like an RFID based vehicle tracking system with embedded GSM modem to send data to a server over the Internet, a GPS device with GSM, a house lights controller via IP. a vending machine controller, etc. Please do not hesitate to ask any question. I am very interested in working with you with this project. I can do this job on the TI chip you suggest also, but I will need to buy the developer kit to give you a fast delivery time. This kit and all the needed components will need to be payed extra by you and I will return them to you.
help

 

1000

50% ($500)

100 days

Mon, Aug 9

(No Feedback Yet)


Please check PMB
help

 

1000

55% ($550)

10 days

Mon, Jun 28

(No Feedback Yet)


We have a group of experienced people in this field who are working since one year.Our Motto:"WE CAN BRING YOUR THOUGHTS INTO REALITY&...more
We have a group of experienced people in this field who are working since one year.Our Motto:"WE CAN BRING YOUR THOUGHTS INTO REALITY".So just take a chance and we guarantee you a quality work. Thanks Technoind
help

 

1000

33% ($330)

15 days

Mon, Jun 28

(No Feedback Yet)


Hello there. I have done alot of work with embedded system programming and can do this project for sure. Regards
help

 

1300

15% ($195)

30 days

Mon, Jun 28

(No Feedback Yet)


Hi, I am excellent in this field.I am sure i will easily do this project.Please contact me
help

 

1500

25% ($375)

30 days

Mon, Jun 28

(No Feedback Yet)


Hello, Pls. see details in PMB. Thanks Miki
help

 

800

50% ($400)

10 days

Mon, Jun 28

(No Feedback Yet)


I'd love to take up this challenge !!!
help

 

1000

10% ($100)

30 days

Mon, Jun 28

(No Feedback Yet)


i am presently working in the same kind of application which is aquire tge signal in msp430 and transmitting the signal to pc and display.
help

 

1500

40% ($600)

45 days

Mon, Jun 28

(No Feedback Yet)


Dear Flevin, For completion you will need two pcbs and a software code, 1)transmitter 2)receiver and 3)Sofware part for display on PC. Do yo...more
Dear Flevin, For completion you will need two pcbs and a software code, 1)transmitter 2)receiver and 3)Sofware part for display on PC. Do you need all three? I hope you will. An idea about coverage range? Distubance of envronment? What is the delay level accepted? ... I have already done with the transmitter section using msp430f149. And prefer lpc2148 for reception and usb connectivity wiht PC. What is it you need? C code alone?... For transmitter, Receiver and Front-end? Or PCBs Schematic layouts ......?? Please clarify. Then only we can talk about time frame. Bu will not exceed 60-70 days if at all wiht PCBs...
help

 

750

50% ($375)

21 days

Tue, Jun 29

(No Feedback Yet)


I can do this if you are not restricted by the microcontroller.
help

 

1000

5% ($50)

15 days

Tue, Jun 29

(No Feedback Yet)


Depending on input signal bandwidth, built-in TI MCU ADC couldn't be enough fast! Our proposal is to use a faster device (such as dsPic33 o...more
Depending on input signal bandwidth, built-in TI MCU ADC couldn't be enough fast! Our proposal is to use a faster device (such as dsPic33 or PIC32, both by Microchip), ZigBee or Bluetooth transceiver (according to your preference) and a .NET WPF application on PC side. If you like, we could send you also the hardware needed to test whole solution (MCU board made on custom PCB and wireless transceivers) for additional $250.
help

 

1500

10% ($150)

60 days

Tue, Jun 29

(No Feedback Yet)


With MSP430x based processor and an RF module. i can design and give it to you. Working hardware modules (base unit + PC end), schematics, f...more
With MSP430x based processor and an RF module. i can design and give it to you. Working hardware modules (base unit + PC end), schematics, firmware, source codes will be delivered. I have enough experience on designing RF and Data logging systems.
help

 

1000

5% ($50)

14 days

Wed, Jun 30

(No Feedback Yet)


I can do it.
help

 

950

25% ($238)

45 days

Sat, Jul 3

(No Feedback Yet)


I do have an experience on a similar project which involved an embedded C board with an A/D convertor. We displayed the data in the PC using...more
I do have an experience on a similar project which involved an embedded C board with an A/D convertor. We displayed the data in the PC using a serial communication. Your solution is a DSP processor with a wireless interface. Bill of Material will be provided to you if your require it, we expect you to provide us the materials and software licenses.
help

 

1000

-

30 days

Thu, Jul 1

(No Feedback Yet)


We have wide experience in end to end data acquisition system including technologies like FPGA,C-coding,OpenGL for graphics,QT for GUI,DSP c...more
We have wide experience in end to end data acquisition system including technologies like FPGA,C-coding,OpenGL for graphics,QT for GUI,DSP controller,linux etc.
help

 

1100

5% ($55)

30 days

Thu, Jul 1

(No Feedback Yet)


Sir iam an embedded enginner with 15 years of experience in this field.I have lot of experience with dsp prosessors and trhis project seems ...more
Sir iam an embedded enginner with 15 years of experience in this field.I have lot of experience with dsp prosessors and trhis project seems to be quiet simple to me . so if you are intrested pls contact me thanks
help

 

1000

50% ($500)

30 days

Sat, Jul 3

(No Feedback Yet)


I propose that in order to get the required speed and FFT resolution that a SOC ( system on chip ) FPGA solution be deployed. I can design a...more
I propose that in order to get the required speed and FFT resolution that a SOC ( system on chip ) FPGA solution be deployed. I can design a system that will do multi channel FFT with onboard VGA text and waveform display eth or radio interface ... conversion rates upto 100 MSPS and bit resolutions upto 36 or more. Regards.
help

 

1000

-

6 days

Wed, Jul 7

(No Feedback Yet)


chk my profile
help

 

1500

40% ($600)

10 days

Thu, Jul 8

(No Feedback Yet)


I have done ADC+FFt with PIC for a radar, and also PC communication with PIC in another application.
help

 

1000

50% ($500)

14 days

Fri, Jul 9

(No Feedback Yet)


This looks straightforward. I could use a chronos package for example that uses the same micro and deliver the C-code that will interoperat...more
This looks straightforward. I could use a chronos package for example that uses the same micro and deliver the C-code that will interoperate with that and with the open-source display package to be determined at design time.
help

 

1000

-

35 days

Fri, Jul 9

(No Feedback Yet)


Electrical engineer with 20+ embedded development experience. Please see PMB for more details.
help

 

1000

-

60 days

Tue, Jul 13

(No Feedback Yet)


Hello sir, I am engineer in electronics from Bulgaria, and I can do the hardware and the software you need for 60 days. It will cost you no ...more
Hello sir, I am engineer in electronics from Bulgaria, and I can do the hardware and the software you need for 60 days. It will cost you no more no less than 100 USD. Thank you !
help

 

1200

25% ($300)

40 days

Thu, Jul 15

(No Feedback Yet)


I worked for a Company that develops medical devices. The system that I worked montors the vitals (eg: Respiration) of the patient and trans...more
I worked for a Company that develops medical devices. The system that I worked montors the vitals (eg: Respiration) of the patient and transfers the data wirelessly to the PC. The PC then shows the respiration in a scrolling graph. The Respiration has to go through an algorithm (for filtering and rate calculation) in the embedded micro controller before transfering the data wirelessly to the PC. I have even tried to use TI's MSP430 on the same project to evaluate if it is any quicker than the micro-controller I have been using. If you are interested please let me know if you have decided on the wireless module yet. Cheers Sam
help

 

1300

-

27 days

Fri, Jul 16

(No Feedback Yet)


may I help?
help

 

1200

20% ($240)

20 days

Mon, Jul 19

(No Feedback Yet)


Hi, I have a TI DSP 2812 development board I can use a starting point. After I finish the project you can buy a development board for ...more
Hi, I have a TI DSP 2812 development board I can use a starting point. After I finish the project you can buy a development board for about 300$, or I can make you a design of your own. For the wireless part, I have experience on Bluetooth - I have developed a carkit using CSR's bluetooth stack & CSR BT chip (http://www.detechnews.com/novero-thetalkyone-bluetooth-speakerphone.html) For the PC part, I can swiftly develop an application in Python. For the hardware development, the design would cost you not more than 500$. Prototype manufacturing in Romania - 300$ for 3-5 prototype boards
help

 

750

100% ($750)

30 days

Mon, Jul 19

(No Feedback Yet)


i have enough experience in in this project
help

 

1500

10% ($150)

60 days

Tue, Jul 20

(No Feedback Yet)


Worked on many Signal processing devices, including oscilloscope, signal emulator, images and brainwaves processing, involving advanced math...more
Worked on many Signal processing devices, including oscilloscope, signal emulator, images and brainwaves processing, involving advanced mathematical operations for pre-processing or processing, including FFT, wavelets etc. I used to work with Bluetooth, proprietary RF or Zigbee for wireless data transmission.
help

 

1000

20% ($200)

30 days

Wed, Jul 21

(No Feedback Yet)


I need information on how much data sample rate do you require
help

 

1300

20% ($260)

25 days

Sat, Jul 24

(No Feedback Yet)


I would suggest AVR32 microcontroller as it has its signal processing library and ADC. FFT can be viewed in a window application written in ...more
I would suggest AVR32 microcontroller as it has its signal processing library and ADC. FFT can be viewed in a window application written in C# and can be further saved and charted in Excel sheet if you want to. Other suggestion would be using the LabView for the purpose of displaying data.
help

 

1000

-

14 days

Tue, Jul 27

(No Feedback Yet)


An MSP430 wih integrated HW multiplier and preferably DMA controller (based on F169 or similar) Probably embeded ZigBee(tm) based, a WiFi(tm...more
An MSP430 wih integrated HW multiplier and preferably DMA controller (based on F169 or similar) Probably embeded ZigBee(tm) based, a WiFi(tm) solution would be too complicated but this means a ZigBee module/receiver on the PC too. wireless applications are range critical
help

 

2000

10% ($200)

30 days

Thu, Jul 29

(No Feedback Yet)


We have a Bluetooth device which will do the wireless data transfer. We are experienced with waveform programs using Delphi, and would do th...more
We have a Bluetooth device which will do the wireless data transfer. We are experienced with waveform programs using Delphi, and would do this with OOP. For microntrollers, we would use an Atmel Xmega (no experience with TI MSP430 yet).
help

 

1000

50% ($500)

30 days

Thu, Jul 29

(No Feedback Yet)


We did similer projects using DSP. Hope to collaborate.
help

 

800

100% ($800)

3 days

Sat, Jul 31

(No Feedback Yet)


We are ready to work with in this short time.
help

 

1500

25% ($375)

15 days

Wed, Aug 4

(No Feedback Yet)


I can do this
help

 

750

10% ($75)

20 days

Wed, Aug 4

(No Feedback Yet)


Microcontroller -$ some serial interface like rs232-$ I dont know the exact cost of each item . but surely i can do what you expecting.
help

 

1200

50% ($600)

14 days

Tue, Aug 10

(No Feedback Yet)


I have done something similar so can help you with a proven concept. Please see PM for details.
help

 

1200

50% ($600)

20 days

Wed, Aug 11

(No Feedback Yet)


Hi We are the team of 15 R&D engineers,We can donit this project with in 15 to 20 days as earlier as possible.We are in the field of pow...more
Hi We are the team of 15 R&D engineers,We can donit this project with in 15 to 20 days as earlier as possible.We are in the field of power electronics with Embedded software developement.This is minor project for ours Thanks & Regards Ramkumar
help


    Bid on this Project