Sikas

My skills:

My projects:

Sikas has not completed any projects.

Sikas has not completed any projects.

• calculator from visual basic to PHP

  $30 USD In Progress

  HiI need to transform a current program from Visual basic to PHP for a web based use.All scripts and calcs already done.see attached file-enable macros plsrgdsHugoHiI need to transform a current program from Visual basic to PHP for a web based use.All scripts and calcs already done.see attached file-enable macros plsrgdsHugo

• SMALL SIMPLE PING PROGRAM

  446 ZAR In Progress

  Hi, i am looking for a really simple program to be able to ping an ip address of my choice and if it fails 3 times to alert me via email of my choice. for windows XP..Hi, i am looking for a really simple program to be able to ping an ip address of my choice and if it fails 3 times to alert me via email of my choice. for windows XP..

• Tickle Script for Cisco Router

  $5 USD/hr In Progress

  Hi, I need a short TCL(tickle) script that on a Cisco Router when called: 1) Executes the following command: copy tftp://10.10.10.1/test.cfg running-config (adding the contents of test.cfg to the running-configs of the router)2) When this command is executed, the CLI will show a pattern: Destination filename [running-config]? at this point the script should enter 'running-config'3) If no other CLI pattern is displayed, exit the script 4) if the following CLI pattern is shown 'Static entry in use, do you want to delete child entries? [no]:' enter 'yes' and exit the script.Hi, I need a short TCL(tickle) script that on a Cisco Router when called: 1) Executes the following command: copy tftp://10.10.10.1/test.cfg running-config (adding the contents of test.cfg to the running-configs of the router)2) When this command is executed, the CLI will show a pattern: Destination filename [running-config]? at this point the script should enter 'running-config'3) If no other CLI pattern is displayed, exit the script 4) if the following CLI pattern is shown 'Static entry in use, do you want to delete child entries? [no]:' enter 'yes' and exit the script.

  [more]

• Cisco network configuration into vlans

  $277 AUD Yesterday

  I have a site comprising of 3x Cisco SF300, a Cisco 881 router and 2x WAP200 wireless access points.There are also a number of Cisco IP phones, with desktops connected to the secondary port.One of the SF300s is in Layer 3 mode.Currently the network is a single, flat VLAN terminating on FE0 on the 881. The 881 does not do multiple VLANs on the FE0-3 ports.FE4 on the 881 is connected to a corporate ethernet NTU with a single IP Address, and an additional block of 6.We have an additional ADSL service that has just been provisioned and we have a modem that can be used in bridge mode.We would like the following outcome:On the wireless access points, two SSIDs: One alled Corporate, One called Guest.The Corporate network should be in VLAN1. The Guest network should be in VLAN20.there should be no communication between VLAN1 and VLAN20.VLAN1 traffic should all exit the network via the FE4 NAT address. VLAN20 traffic should all exit via the new ADSL connection.We can provide remote access using teamviewer, to the server.Changes must be made outside of Australian standard time business hours.Please outline the following in your proposal:- prior experience with these particular devices- certification, if any- how you would envisage the trunking working between devices - whether we would need a 3rd vlan as a 'routing' vlan- a rough design guide- an outline of how long you think it would take to make te changes.Additional requirement:- help us setup a NAT Pool that works randomly. Currently,it's only using the first address in the pool.I have a site comprising of 3x Cisco SF300, a Cisco 881 router and 2x WAP200 wireless access points.There are also a number of Cisco IP phones, with desktops connected to the secondary port.One of the SF300s is in Layer 3 mode.Currently the network is a single, flat VLAN terminating on FE0 on the 881. The 881 does not do multiple VLANs on the FE0-3 ports.FE4 on the 881 is connected to a corporate ethernet NTU with a single IP Address, and an additional block of 6.We have an additional ADSL service that has just been provisioned and we have a modem that can be used in bridge mode.We would like the following outcome:On the wireless access points, two SSIDs: One alled Corporate, One called Guest.The Corporate network should be in VLAN1. The Guest network should be in VLAN20.there should be no communication between VLAN1 and VLAN20.VLAN1 traffic should all exit the network via the FE4 NAT address. VLAN20 traffic should all exit via the new ADSL connection.We can provide remote access using teamviewer, to the server.Changes must be made outside of Australian standard time business hours.Please outline the following in your proposal:- prior experience with these particular devices- certification, if any- how you would envisage the trunking working between devices - whether we would need a 3rd vlan as a 'routing' vlan- a rough design guide- an outline of how long you think it would take to make te changes.Additional requirement:- help us setup a NAT Pool that works randomly. Currently,it's only using the first address in the pool.

  [more]

• cisco network review

  $827 USD 12 days ago

  We have 2 ASA firewall configurations and 2 Catalyst Switches with 5 VLANS. We want someone to review our current configuration and provide us any feedback on any performance tuning tips.We have 2 ASA firewall configurations and 2 Catalyst Switches with 5 VLANS. We want someone to review our current configuration and provide us any feedback on any performance tuning tips.

• OpenVPN / Network Solution - Connecting Virtual Machines to a VPN-tunnel service through OpenVPN and internal routing

  kr555 SEK 12 days ago

  I need help with setting up a flawless network solution for connecting Virtual Machines to a VPN-tunnel service through OpenVPN and internal routing.The background:I have a server running VMware ESXi 5.0 with several Virtual Machines running Windows XP. Then, I have another computer from which I operate the VMs through VMware vSphere 5.0. I pay a company to provide me with a VPN-tunnel service including extra static IP addresses. What I want to achieve is to assign one of the extra IP addresses to each of the VMs. I.e. each VM should have its own unique public IP address. The company provides a guide for how to do this by setting up Internal Routing, the guide can be found here:http://forum.prq.se/viewtopic.php?f=2&t=12&sid=6da6341c7f51443242fbd48ebb8f333eI have tried to follow the steps in the guide but I fail time after time due to a lack of knowledge. Thats why Im willing to pay a freelancer to do the job.The project consists of two parts:1. Set up a flawless OpenVPN/network solution on my system as described above.2. Write a simple guide that explains how to set up the same solution for additional VMs and IP addresses. I.e. I should be able to assign new IP addresses to new VMs by myself after the project is done.I hope you got a good idea of what Im asking for and I look forward to work with you!I need help with setting up a flawless network solution for connecting Virtual Machines to a VPN-tunnel service through OpenVPN and internal routing.The background:I have a server running VMware ESXi 5.0 with several Virtual Machines running Windows XP. Then, I have another computer from which I operate the VMs through VMware vSphere 5.0. I pay a company to provide me with a VPN-tunnel service including extra static IP addresses. What I want to achieve is to assign one of the extra IP addresses to each of the VMs. I.e. each VM should have its own unique public IP address. The company provides a guide for how to do this by setting up Internal Routing, the guide can be found here:http://forum.prq.se/viewtopic.php?f=2&t=12&sid=6da6341c7f51443242fbd48ebb8f333eI have tried to follow the steps in the guide but I fail time after time due to a lack of knowledge. Thats why Im willing to pay a freelancer to do the job.The project consists of two parts:1. Set up a flawless OpenVPN/network solution on my system as described above.2. Write a simple guide that explains how to set up the same solution for additional VMs and IP addresses. I.e. I should be able to assign new IP addresses to new VMs by myself after the project is done.I hope you got a good idea of what Im asking for and I look forward to work with you!

  [more]

• Cisco Network Engineer

  $111 USD 12 days ago

  Manage voice and Data Network.Configure IP Phone and Troubleshoot voice related issues.Configure vlan and troubleshoot switch related issue.ASA, IPS management.Monitor network issues through LMS.Manage voice and Data Network.Configure IP Phone and Troubleshoot voice related issues.Configure vlan and troubleshoot switch related issue.ASA, IPS management.Monitor network issues through LMS.

• Hot-spot Solution

  $154 USD 19 days ago

  We need a Router with a hotspot functionality, so that our customers can enjoy FREE internet facility. The firmware of the router should have a captive portal function. When users connected to the router they should land into a page to login as Facebook Or Twitter user, to access the internet service.This all should be based on ddwrt /openwrt solution. Please let me know how you would achieve this project for me? :)We need a Router with a hotspot functionality, so that our customers can enjoy FREE internet facility. The firmware of the router should have a captive portal function. When users connected to the router they should land into a page to login as Facebook Or Twitter user, to access the internet service.This all should be based on ddwrt /openwrt solution. Please let me know how you would achieve this project for me? :)

  [more]

• Internet app to schedule waves emission on generic wireless modems

  €750 EUR Mar 1, 2013

  Please read before bidding READ CAREFULLYDo not bid with standard template but READI want t Internet visitors to have the chance to manage the wireless emissions of their wireless modems.Usually people are frightened by wireless waves risks but they don't know how to manage their wireless modem. They can't put a energy supply timer: too many ON/OFF, too many power cycles damage modern modems.Best way is to get people the chance to schedule the waves emission according to their working hours, but they have the problem that wireless modem is never physically connected to computer: then if you simply shut down the wireless emission you can't have it back because you can't connect.The solution could be to give exact working hours to the modemThen this is the project for a virtual timer. Suggestions are welcome.Internet visitor visits internet site.He chooses his modem or his modem family (I'd like to have a flexible solution)In a web page he enters the START/ON and STOP/OFF time of wireless emissionHe push a send button A telnet script or a java control will schedule on modem the emission hours. It doesn't shut off the modem, but it disables the wireless emissionAnd this settings will be the same until new changes defined by visitorPlease read before bidding READ CAREFULLYDo not bid with standard template but READI want t Internet visitors to have the chance to manage the wireless emissions of their wireless modems.Usually people are frightened by wireless waves risks but they don't know how to manage their wireless modem. They can't put a energy supply timer: too many ON/OFF, too many power cycles damage modern modems.Best way is to get people the chance to schedule the waves emission according to their working hours, but they have the problem that wireless modem is never physically connected to computer: then if you simply shut down the wireless emission you can't have it back because you can't connect.The solution could be to give exact working hours to the modemThen this is the project for a virtual timer. Suggestions are welcome.Internet visitor visits internet site.He chooses his modem or his modem family (I'd like to have a flexible solution)In a web page he enters the START/ON and STOP/OFF time of wireless emissionHe push a send button A telnet script or a java control will schedule on modem the emission hours. It doesn't shut off the modem, but it disables the wireless emissionAnd this settings will be the same until new changes defined by visitor

  [more]

Sikas does not have any open projects.

Sikas does not have any work in progress.

Portfolio

Description

Related Work

Sikas Portfolio