AIRA

• Mech design and drawings of rugged enclosure w/prototype

  $750 USD
  5.0
  

  pagepedersen

  Aug 28, 2012

  “ AiraDesign is extremely creative, very professional and very dedicated to the projects they take on. The specific project was a little delayed, but with very good reason - they asked questions about issues I hadn't thought about and I needed time to answer. So the questions creating a delay in a matter of facts gave a better final result! Can only highly recommend and will hire again.AiraDesign is extremely creative, very professional and very dedicated to the projects they take on. The specific project was a little delayed, but with very good reason - they asked questions about issues I hadn't thought about and I needed time to answer. So the questions creating a delay in a matter of facts gave a better final result! Can only highly recommend and will hire again. ”
  Project Description: Mechanical design and drawings of rugged enclosure plus one prototype. Project: Process Supervision Unit, Mechanics I am looking for help in designing an enclosure for an industrial Process Supervision Unit (PSU)...
  [more]

• Modern/Artistic iPhone Dock

  $250 USD
  5.0
  

  manturafs

  Jul 26, 2012

  “ Airadesign really went above and beyond for our project. Irina had excellent communication, quality work, and worked with us as we went through multiple iterations and changes to the requirements. Ariadesign is extremely professional and we would definitely recommend them. We plan to work with Irina again.Airadesign really went above and beyond for our project. Irina had excellent communication, quality work, and worked with us as we went through multiple iterations and changes to the requirements. Ariadesign is extremely professional and we would definitely recommend them. We plan to work with Irina again. ”
  Project Description: We would like to select designers to mock up designs for an iPhone/iPod dock that looks modern and artistic, but is also very functional. Unlike other docks, this dock connects to the audio/mic of a computer and a phone headset jack...
  [more]

• iPad case plus....

  $450 USD
  5.0
  

  butwhyowhy

  Aug 31, 2011

  “ Airadesign did an exceptional job on this project. She went above and beyond what was expected and stuck with us through all stages of the project. We look forward to working with her again!Airadesign did an exceptional job on this project. She went above and beyond what was expected and stuck with us through all stages of the project. We look forward to working with her again! ”
  Project Description: We need a talented and creative Product Engineer to create an iPad case. We are flexible as to which 3D program you choose to use. The unique aspects of the cover will be discussed at the start of the project...
  [more]

• Ultra Portable PhotoBooth

  $700 USD
  5.0
  

  blitzna

  Jul 6, 2011

  “ I was extremely impressed with the work that was down for this project. Irina's understanding of the requirement was very accurate - and she thoroughly researched the background of the project - which lead to her coming up with multiple solutions that were all of a very high level. I was further impressed by Irina's innovative solutions and her unique design skills. The end result has been extremely pleasing - and I would not hesitate to recommend using Irina for any other design project.I was extremely impressed with the work that was down for this project. Irina's understanding of the requirement was very accurate - and she thoroughly researched the background of the project - which lead to her coming up with multiple solutions that were all of a very high level. I was further impressed by Irina's innovative solutions and her unique design skills. The end result has been extremely pleasing - and I would not hesitate to recommend using Irina for any other design project. ”
  Project Description: I am needing someone to design an ultra portable PhotoBooth. The entire booth needs to be able to pack down so it would fit into a standard sized car trunk/boot. When errected, the booth would need to be approxiamately 1.5m x 1.5m in dimensions...
  [more]

• Unique arcade gaming cabinet mockups

  [Sealed]
  4.6
  

  x7wonders

  Jan 14, 2011

  “ Extremely helpful, thoughtful and skillful. Great designs at a great price, exactly what was needed for the initial part of this project. Will definitely work further with her on this and further projects!Extremely helpful, thoughtful and skillful. Great designs at a great price, exactly what was needed for the initial part of this project. Will definitely work further with her on this and further projects! ”
  Project Description: [This is a Private Project. You must be logged in to view the Project Description]
  [more]

• Pharmacy furnishing

  $100 USD
  5.0
  

  farmalexbuzau

  Jan 9, 2011

  “ Aira design team did an excellent job. They are very creative and transformed my pharmacy into a modern, state of the art design. Very good comunication they understood the particularities of the project, offering me the best solutions. It definetly worth to work with them.Aira design team did an excellent job. They are very creative and transformed my pharmacy into a modern, state of the art design. Very good comunication they understood the particularities of the project, offering me the best solutions. It definetly worth to work with them. ”
  Project Description: I have a pharmacy that needs a new interior design and a new facade as well. The selling room that needs to be refurnished it's about 40 square meters. I will need a modern design, with renderings, plans and details for customize furniture...
  [more]

AIRA has not completed any projects.

• Custom Project Apr 03 2012 14:55:06

  $15 USD/hr In Progress

  Dear AIRA Design StudioI seek creative designers to help me put together a solid brand identity & a complementing concept design for Moe's Diner. Attached is an initial logo that I worked with until I won the location bid on the space.The Vision for Moe's diner is to be an american diner in a modern setting [business district] in Dubai. I do not want it to be the "cliche" type diner with Chevorlette grills and S/Steel & checkered floor, as this may be out of place.It's 1600 Square Feet [40X40] shop on a main road in a business district in Dubai. Please let me know if you're interested in creating a brand identity & conept design for Moe's diner.attached is the business brief about the diner, and some inspirational pictures. please let me know if you're interested in the job.Dear AIRA Design StudioI seek creative designers to help me put together a solid brand identity & a complementing concept design for Moe's Diner. Attached is an initial logo that I worked with until I won the location bid on the space.The Vision for Moe's diner is to be an american diner in a modern setting [business district] in Dubai. I do not want it to be the "cliche" type diner with Chevorlette grills and S/Steel & checkered floor, as this may be out of place.It's 1600 Square Feet [40X40] shop on a main road in a business district in Dubai. Please let me know if you're interested in creating a brand identity & conept design for Moe's diner.attached is the business brief about the diner, and some inspirational pictures. please let me know if you're interested in the job.

  [more]

• Project ML200

  [Sealed] In Progress

  [This is a Private Project. You must be logged in to view the Project Description][This is a Private Project. You must be logged in to view the Project Description]

• PhotoBooth box

  [Sealed] In Progress

  [This is a Private Project. You must be logged in to view the Project Description][This is a Private Project. You must be logged in to view the Project Description]

• 3d iphone, ipad, ipod case design

  $200 USD In Progress

  I am starting a business that will provide custom 3d cases for mobile devices.I am looking for designers that would like to create 3d cases that can be printed on a 3d printer and sold on my website.I need case designs for the iPhone 4/4s, iPad 1 and 2, iPod touch (current generation), iPod nano (current generation and should be a wristband type case), and Macbook products.I will be purchasing multiple case designs from multiple artists so please do not hesitate to bid.Please go to freshfiber dot com to see case design examples. Fresh fiber is my main competitor, I am not affiliated with them at all. My company is Mobile Bandz and I am currently building my site at mobilebandz dot com.I am starting a business that will provide custom 3d cases for mobile devices.I am looking for designers that would like to create 3d cases that can be printed on a 3d printer and sold on my website.I need case designs for the iPhone 4/4s, iPad 1 and 2, iPod touch (current generation), iPod nano (current generation and should be a wristband type case), and Macbook products.I will be purchasing multiple case designs from multiple artists so please do not hesitate to bid.Please go to freshfiber dot com to see case design examples. Fresh fiber is my main competitor, I am not affiliated with them at all. My company is Mobile Bandz and I am currently building my site at mobilebandz dot com.

  [more]

• Casing Design for Electronic Instrument for Food Industry

  $400 USD In Progress

  [This is a Private Project. You must be logged in to view the Project Description][This is a Private Project. You must be logged in to view the Project Description]

• illustration from a CAD rendering

  $50 USD Feb 1, 2013

  Hi AIRA, We are hopeful you may be able to assist us with a project.We have about seven drawings that we require for a presentation on the 12th of February. We'd like to begin with one drawing, see how it goes and then hopefully do more work.The first illustration we need would be based on an existing CAD rendering. Because of the nature of our business, we do require that an NDA be signed before sharing details.Thank you!ErinHi AIRA, We are hopeful you may be able to assist us with a project.We have about seven drawings that we require for a presentation on the 12th of February. We'd like to begin with one drawing, see how it goes and then hopefully do more work.The first illustration we need would be based on an existing CAD rendering. Because of the nature of our business, we do require that an NDA be signed before sharing details.Thank you!Erin

  [more]

• Custom Project Jan 21 2013 14:39:54

  $250 AUD Jan 21, 2013

  Hi,I am looking to have designed a set of ceiling fan blades for a new design of ceiling fan. The new design of fan has the motor fixed to the ceiling with a spinning rod coming from the bottom of the motor down to the blade. Because the blades are no longer required to be fixed to the spinning motor, this allows for greater design flexibility for the look of the blades. The only consideration for the blade design is that they need to be balanced evenly to avoid wobble when spinning at high revolutions. and also there needs to be a angle in the blade to generate wind.I am requiring some contemporary/modern blade designs to attach to the ceiling mounted motor. the fans are required to have 3 -4 blades with the key design feature being thin, low profile, unobtrusive. I have provided some inspiration pictures to give you the idea for what I am after. The Prop fan picture shows how the motor is attached to the ceiling with blades attached to the base of the spinning rod. The mogan fan picture is of a fan that is very thin in profile, however the motor is not required in the centre. The origami fan is similar, without the motor in the middle it would be very thin, however i require it to be 3 or 4 blade. The loft fan has a very nice taper in the blade, if the blades were to be able to be linked in the middle without the motor i think this would look good. This is the kind of style i am looking for. If you are able to help me with this project i would be grateful.Hi,I am looking to have designed a set of ceiling fan blades for a new design of ceiling fan. The new design of fan has the motor fixed to the ceiling with a spinning rod coming from the bottom of the motor down to the blade. Because the blades are no longer required to be fixed to the spinning motor, this allows for greater design flexibility for the look of the blades. The only consideration for the blade design is that they need to be balanced evenly to avoid wobble when spinning at high revolutions. and also there needs to be a angle in the blade to generate wind.I am requiring some contemporary/modern blade designs to attach to the ceiling mounted motor. the fans are required to have 3 -4 blades with the key design feature being thin, low profile, unobtrusive. I have provided some inspiration pictures to give you the idea for what I am after. The Prop fan picture shows how the motor is attached to the ceiling with blades attached to the base of the spinning rod. The mogan fan picture is of a fan that is very thin in profile, however the motor is not required in the centre. The origami fan is similar, without the motor in the middle it would be very thin, however i require it to be 3 or 4 blade. The loft fan has a very nice taper in the blade, if the blades were to be able to be linked in the middle without the motor i think this would look good. This is the kind of style i am looking for. If you are able to help me with this project i would be grateful.

  [more]

• Custom Project Nov 19 2012 15:27:18

  $500 USD Nov 19, 2012

  To whom it may concern: We would like to develop a wine opener with various functions. We have completed a design with 3D CAD however we don't like the way of opening a wine. Our current model's way of opening a wine is by way of using a rotary handle to rotate hence the cork screw rotates to open a wine. We would like to change the way of this, it could be like the ordinary wine opener in the market or something new. Our 3D CAD apart from the wine opener functions we also included other functions and accessories which we would like to keep them as they are. If you are interested in this we will send you an Non-Disclosure agreement prior sending all 3D files. Thanks. Best rgdsJesseTo whom it may concern: We would like to develop a wine opener with various functions. We have completed a design with 3D CAD however we don't like the way of opening a wine. Our current model's way of opening a wine is by way of using a rotary handle to rotate hence the cork screw rotates to open a wine. We would like to change the way of this, it could be like the ordinary wine opener in the market or something new. Our 3D CAD apart from the wine opener functions we also included other functions and accessories which we would like to keep them as they are. If you are interested in this we will send you an Non-Disclosure agreement prior sending all 3D files. Thanks. Best rgdsJesse

  [more]

• Project Aug 22 2012 16:42:39

  $15 USD/hr Aug 24, 2012

• Portable Photobooth

  $200 AUD Mar 11, 2012

  Hi There, Im looking at producing a unique portable photobooth design for my use at weddings and events and wondered if you would be able to help.I like your previous designs and wondered if you are able to do something similar - the key for me would be to ensure a relatively easy manufacturing process, any tips on how I could go about taking your design to be manufactured would be appreciated too.Basically it will need to be strong enough to hold a screen, camera, printer and lighting pole.Only other requirements are for it to be:-Nice and easy for it to be dismantled and to be transported-Look decent enough for weddings and corporate eventsI also think this design is really nice too http://www.photobooth.com.au/home.phpIf this is of interest to you please email me back on tearout@iinet.net.auCheersChrisHi There, Im looking at producing a unique portable photobooth design for my use at weddings and events and wondered if you would be able to help.I like your previous designs and wondered if you are able to do something similar - the key for me would be to ensure a relatively easy manufacturing process, any tips on how I could go about taking your design to be manufactured would be appreciated too.Basically it will need to be strong enough to hold a screen, camera, printer and lighting pole.Only other requirements are for it to be:-Nice and easy for it to be dismantled and to be transported-Look decent enough for weddings and corporate eventsI also think this design is really nice too http://www.photobooth.com.au/home.phpIf this is of interest to you please email me back on tearout@iinet.net.auCheersChris

  [more]

• Custom Project Dec 18 2011 13:43:43

  $30 USD Dec 18, 2011

  Greetings dearest one,I am writing this letter in confidence believing that if it is the wish of God for you to help me, God almighty will bless and reward you abundantly and you would never regret coming in contact with me. I am 23yrs old. A student from Republic of Cote dâIvoire Abidjan, Iâ do like any person who can be caring, loving and home oriented. After reading this mail kindly respond on my private E-mail ID: fatima_ahmed12391@yahoo.com.ph)I will love to have a long-term relationship with you and to know more about you. I would like to build up a solid foundation with you in time coming if you can be able to help me in this transaction. Well, my father died earlier some months ago and left I the only daughter behind, he was economic operator, director (manager) company (society) late Ali Ahmed. He died in heart attack because of killing of innocent people in my country Cote dâIvoire crisis. I was only daughter to him and I am the only person who can take care of his wealth and my mother was died on my tender Age I donât even know her. My late father left the sum of (6, 5, 000.00 US Dollars) in a financial Bank here. This money was annually paid into my late fatherâs account from Shell petroleum development company (SPDC) and chevron oil company operating in our locality for the compensation of his good work to the community, I don't know how and what I will do to invest this money somewhere in abroad, so that my father's kindred will not take over what belongs to me as the next of kin, which they were planning to do so without my present because I am a female as stated by our culture in the town. Now, I urgently need your humble assistance to move this money from the Bank to your country and I strongly believe that by the grace of God, you will help me invest this money wisely over there. I am ready to offer 15% of the total amount to you if you help me in this transaction and another 40% interest of Annual Income to you, for handling the investment project for me until I graduated in my studies, which you will strongly have absolute control over. If you can handle this project sincerely and also willing to assist me in lifting this money, kindly reach me back. Please, note that this transaction is 100% risk free and I hope to commence the transaction as quick as possible, I will send you my picture and also give you more details about this transaction as soon as I hear from you. I will be waiting to hear from you on private E-mail ID: fatima_ahmed12391@yahoo.com.ph)Yours sincerely Miss Fatima Ahmad. Greetings dearest one,I am writing this letter in confidence believing that if it is the wish of God for you to help me, God almighty will bless and reward you abundantly and you would never regret coming in contact with me. I am 23yrs old. A student from Republic of Cote dâIvoire Abidjan, Iâ do like any person who can be caring, loving and home oriented. After reading this mail kindly respond on my private E-mail ID: fatima_ahmed12391@yahoo.com.ph)I will love to have a long-term relationship with you and to know more about you. I would like to build up a solid foundation with you in time coming if you can be able to help me in this transaction. Well, my father died earlier some months ago and left I the only daughter behind, he was economic operator, director (manager) company (society) late Ali Ahmed. He died in heart attack because of killing of innocent people in my country Cote dâIvoire crisis. I was only daughter to him and I am the only person who can take care of his wealth and my mother was died on my tender Age I donât even know her. My late father left the sum of (6, 5, 000.00 US Dollars) in a financial Bank here. This money was annually paid into my late fatherâs account from Shell petroleum development company (SPDC) and chevron oil company operating in our locality for the compensation of his good work to the community, I don't know how and what I will do to invest this money somewhere in abroad, so that my father's kindred will not take over what belongs to me as the next of kin, which they were planning to do so without my present because I am a female as stated by our culture in the town. Now, I urgently need your humble assistance to move this money from the Bank to your country and I strongly believe that by the grace of God, you will help me invest this money wisely over there. I am ready to offer 15% of the total amount to you if you help me in this transaction and another 40% interest of Annual Income to you, for handling the investment project for me until I graduated in my studies, which you will strongly have absolute control over. If you can handle this project sincerely and also willing to assist me in lifting this money, kindly reach me back. Please, note that this transaction is 100% risk free and I hope to commence the transaction as quick as possible, I will send you my picture and also give you more details about this transaction as soon as I hear from you. I will be waiting to hear from you on private E-mail ID: fatima_ahmed12391@yahoo.com.ph)Yours sincerely Miss Fatima Ahmad.

  [more]

• Creative Industrial Designers & Artists

  $250 USD Jul 20, 2011

  To 3D Prototypes of music stand accessories, Knowledge in Plastic Injection mould is preferable but not essential. Should be present with photo samples of Industrial designs with great artistic style. We are looking to design and produce 3D guitar stand accessories in all shapes, forms and sizes. This position could have long term potential for the right designer/artist.To 3D Prototypes of music stand accessories, Knowledge in Plastic Injection mould is preferable but not essential. Should be present with photo samples of Industrial designs with great artistic style. We are looking to design and produce 3D guitar stand accessories in all shapes, forms and sizes. This position could have long term potential for the right designer/artist.

  [more]

AIRA does not have any open projects.

AIRA does not have any work in progress.

Portfolio

Description

Related Work

airadesign Portfolio

+ Add feature image