offline
Last seen: Aug 01, 2014 4:08 PM EDT
Hire Me!
Rate: $30.00 USD/hour
Follow Invite to Project
 

anujgargiitk

Mechanical Designer / Mathematical Modeller

Username: anujgargiitk

  • Has made a deposit.
  • Has verified their email address.
  • Has completed their profile.
  • Has verified their secure phone number.
  • Verified
  • Payment is not verified.

Location: Delhi, India

Member since: December 2012

Reputation:

4.9/5

(27 reviews)

6.5
[see more]

No user has recommended this freelancer.

My projects:

  • $700.00 USD
    5.0
    Profile image for Seller heshyhindy

    heshyhindy

    Jun 6, 2014

    Great Freelancer. Responsive and diligent,. Will use again and highly recommended.Thank you

    Project Description:Commercial Printing Company is looking for someone to compile a report detailing the company\'s Greenhouse Gas Usage (tracking). Company will provide electric bills, gas bills, details of the printing operation, list of machinery and all relevant information needed for the report...
    [more]
  • [Sealed]
    4.6
    Profile image for Seller monkeybo99

    monkeybo99

    Nov 27, 2013

    Very very good freelancer. Great Communication skills. Seems to work UK hours which is great. Not on time, but that was my fault as lots of changes to be made, which he did without question or the usual rubbish. Def hire again. Only 4 stars for the quality as a few minor bits of attention to detail issues, but these were sorted in hours without question. Overall, First Class and a really nice guy.

    Project Description:[This is a Private Project. You must be logged in to view the Project Description]
    [more]
  • $400.00 USD
    5.0
    Profile image for Seller Kafi404

    Kafi404

    Nov 11, 2013

    Excellent work! Anuj is very professional and trustworthy.

    Project Description:These are 2 problems project. 1. A heat transfer Matlab project which needs to be solve in one day. The requirement is solving a 1D heat diffusion equation which has a coordinate-dependent heating source...
    [more]
  • $990.00 USD
    5.0
    Profile image for Seller thebra66

    thebra66

    Nov 3, 2013

    Great to work with you and look forward to using your services again!Would Highly recommend .

    Project Description:N/A
    [more]
  • $470.00 USD
    5.0
    Profile image for Seller gussi86

    gussi86

    Oct 9, 2013

    Well done. Will surely work with him again.

    Project Description:We developed a electronic sensor board, for which we do need a casing. The electronic device consists of two pcb's which are both 8cmx4cm (see pictures attached) and should be mounted site by site inside the case...
    [more]
  • £180.00 GBP
    4.2
    Profile image for Seller hardox0000

    hardox0000

    Oct 4, 2013

    Commited and responsible person, made a great effort to do the job as requested. Recommended!

    Project Description:Analysis and discussion of the results obtained from a finned tube heat exchanger in a cross-flow wind tunnel
    [more]
  • £290.00 GBP
    5.0
    Profile image for Seller ahmedAA050

    ahmedAA050

    Sep 29, 2013

    man you r a life saver ,, thank you very much for getting the work done with high quality and on time ,,, wont hesitate to work with you again ,,, well done

    Project Description:same as the other one please find the description on the other one same instructions ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
    [more]
  • $400.00 USD
    5.0
    Profile image for Seller rahazabat

    rahazabat

    Aug 8, 2013

    anujgargiitk is professional, courteous, and an open thinker with the ability to work around limitations while respecting project requirements. Will work together again.

    Project Description:Custom anujgargiitk request.
    [more]
  • $2070.00 USD
    4.4
    Profile image for Seller yespresso

    yespresso

    Jul 14, 2013

    As in all freelancer's.com relations there are .. two interlocutors.. The employer: Me always bringing up modifications (improvements..) and Anuj ... that has to bear continuous requests.. Well not only his work is good But I further include him in the project as he deserve to have the spot light to converge on him.. also!

    Project Description:We are a coffee capsule company that is planning on using for our own needs & selected clients the possibility to building few commercial fluid bed roasters and associated equipment predominantly for the local (SEA) coffee roasting industry...
    [more]
  • $250.00 USD
    5.0
    Profile image for Seller azzman01

    azzman01

    Jun 13, 2013

    Anuj was fantastic to use, the work was complete on time and I would have no problems recommending and using again if the occasion arises

    Project Description:Hi, how is your mechanical statics knowledge? I need some questions answered. Can you help? if so what would your time frame be and we can work out price. Thanks
    [more]
    anujgargiitk has not completed any projects.
  • R16000 ZAR In Progress

    Please find attached project specifications. Page 5 lists the project requirements. Please be confident in your ability to do the work, a chemical engineering graduate will be required.

  • $5000 USD 4 days ago

    I need 3 filter vessels designed to specifications. All appropriate ASME Sec VIII calculations will need to be made. These are 2 sock filters and 1 carbon filter. Approximate outer dimensions are known, but all other details must be completed. Final calculations will be approved by in-house licensed PE.Design pressure is 150psig at 120F. Further details will be shared with shortlisted freelancers

    [more]
  • $890 USD 4 days ago

    We are looking to work with a machining company and draftsman who can supply us with finished/job ready drawings (CAD) and manufacture a machined prototype, we have basic drawings for our product that need to be worked on and drawn up professionally.Our product consists of 5 small detailed mild steel machined components, a separate drawing for each component will be needed.When we are satisfied with the drawings, we would like some assistance to decide on the best way to manufacture the product, once decided we would then like to move forward and have a prototype produced.Project summary-Complete/produce job ready drawings-Communicate and discuss the best way to proceed with manufacturing-Produce an accurate and fully working prototype (all components correct to drawings) We will upload our drawings to the FREELANCER that we have chosen to work with.All drawings will remain the property of Khioni apparel and no copies may be made without prior permission.

    [more]
  • $240 USD 4 days ago

    I need someone to either manufacture a pump or find me a manufacturer that has the exact pump I need. The pump has to be centrifugal and plug into an outlet. this pump will hook up to a traditional water hose outlet. The performance has to be 5 gallons of water per minute at 150 psi of pressure. I have a pump that does exactly this which I am posting some pictures of, but I can not find another one like it, for it came out of a specialty product. I believe the pump was custom made.

    [more]
  • $730 USD 4 days ago

    I have a set of 14 nonlinear equations to solve. I used lsqnonlin to solve them but I am failing in making it converge. This can be attributed to the large difference in value among the 14 unknowns. The solution can range from 1e-10 to 1 across the 14 parameters. I tried all tricks I know to overcome this problem but failed. You are free to use a different solver, write your own solver or normalize the equations in the way you like. The main code is a bit ling but you shouldn"t care about it. All what you need to care about is the 14 equations at the end of the TRIAL_7 code and the caller subroutine for solving the equations. I attached also an excel sheet you approximate values of what some of 14 unknowns should be. These are just approximates of the solution. We can try solving the provided example and if we succeeded then we can try different examples to make sure that the code works. Please check the codes and try playing around with it before bidding. I will happy to provide any extra details and clarifications once needed.

    [more]
  • $300 USD 4 days ago

    I have a casted metal fitting at the end of a hydraulic hose that I want to reproduce. It is not a shelf item. I assume its a hydraulic hose fitting that was a limited design but I would like to (produce) or make this fitting. Please see the attached pictures. As not to waste time I"d like someone to work on this that has experience making CASTED METAL MOLDS. The most important thing here is I need to have the hose end pictured in the attachments. The problem with this fitting is its very cheaply made and falls apart usually a year or 2, the fitting breaks away from the hose. I need a fitting with the same specs but a much stronger design to connect to the hose. I need to be able to make the entire assembly using my own swedging machine.VERY IMPORTANT --(Winning bidder must be able to provide details on how to attach the new fitting). This fitting is used as a return so not a lot of pressure runs through it but it must be able to handle the heat and pressure. Rumors are the main hoses carry 1600 psi, not sure what the psi pressure is on the return lines.I will supply the winning bidder with a model of the hose and a roll of thermoplastic hose I am not looking for speed but I am looking for a workable design. Last thing, I had someone working on this project that wanted to charge me $40/each for a working design. That"s insane. That part here in the US would be about $5-7 each. Please bid accordingly.

    [more]
  • $400 USD 22 days ago

    Maybe this is a project you might be interested in.See attached txt for details and if you are then we could set up a time to have a chat on skype about it and go from there. Kind Regards, Keith

  • $306 USD May 5, 2014

    Please take look for this project , I encourage you to head for this project as starting work with you

  • $150 USD May 1, 2014

    Project is to design a UWB receiver using matlab. Additionally it is required to show how cyclic prefix produces ripples in the power spectral density and zero padding produces a flat power spectral density.

    [more]
  • ₹10000 INR Feb 26, 2014

    Hi,I am working on a project and I need a Simulink programmer.I need a real time simulation model, I have created a some code(.m and .slx file) that needs to be convert into real time silulink model also plant model is needed to be created.Hardware contains PZT bending actuators(BA4510), Piezo driver (PDu100) and Parallel manipulator.So i need a real time working model from which will provide me analog actuation signa to drive actuators. kindly find the YouTube link, refer it for how exact model will work:http://www.youtube.com/watch?v=6Vt81EiXR5othe only difference in the model in video is that they have used PSD and i am using Inertial sensor as a input.The time line will be of max 20 days and budget will be around INR 10000.Please contact me if you are interested. Thanks Harshad k.India.

    [more]
  • $35 USD/hr Feb 4, 2014

    I am currently working on an Excel model in order to predict call using the Erlang formula. I have the basics and the formulas but I need incorporate different formulas and spreadsheet into one. I need to have the data update throughout the day based on what happened earlier in the day. I need someone who is familiar with statistics, math and Excel.

    [more]
  • $30 USD/hr Dec 6, 2013

    HiI have started to explore ways to protect a Bluetooth module, able to withstand being in an oven up to 400 degrees Celsius.Is that within your working area?

  • $500 USD Nov 24, 2013

    We build a vending machine, www.integra-system.euWe would like to redesign a lift system inside of our machine, make system without linear actuator.I can provide you a detail in solidworks 3D picture and explain what we have, how this works and what we have to do better.Please contact me on email mac@ivora.hrThank you,with best regards,rajko ivosevic

    [more]
  • $15 USD Nov 20, 2013

    Hi anujgargiitkPlease find attached the draft for one part of the plant I will need to do it in 3D pipe plant with animation. have a look to the attached and let me know the price and the time please. Regards, Yousriyrifai@po-marketing.com

    [more]
  • €300 EUR Nov 6, 2013

    We have a simple design for a future machine. Only prototpye Status, designed in Autodesk Inventor 2014.To understand the resulting force on some parts, we need a simulation of the movement and resulting force in two symmetrical aligned hydraulic cylinders.We want to have the simulation as an Inventor file to do further investigation.Before providing the CAD files we need to sign a confidentiality contract.

    [more]
  • $70 USD Nov 2, 2013

    by using an explicit and/or implicit convergent finite difference scheme (that is, the scheme must be consistent and at least conditionally stable) selected among the FTBS, FTFS, FTCS schemes. Investigate experimentally the stability of the selected scheme by varying the space and time discretization step sizes. If the scheme is only conditionally stable, verify that instability starts to occur when the CFL stability condition is no longer satisfied.Compare experimentally (graphically) the numerical solution with the exact analytical solution. Motivate your choices and discuss the results.it also provides help that you can refer to attached file.I uploaded two projectsthanxx

    [more]
  • $30 USD/hr Oct 9, 2013

    The paper aims to present a technological design optimization of an industrial centrifugal fan going through steps such as computer aided design CAD, simulation and analysis of elements of interest (CAE) and manufacturing optimization of CAM technology.

    [more]
  • $250 AUD Oct 3, 2013

    I have a model for high temperature thermal energy storage system using heat pipe and phase change materials. I"m looking for some help to validate that model using published paper

  • $10 USD Sep 10, 2013

    dear sir, i like to discuss if it s possible to convert different surfboard shapes in the isogridsystem.watch please: http://www.sheldrake.net/cardboards/boards/i want o make my designs in this System, made of plywood... and i Need the cnc files... for further Details please to mruss@spunklab.com sincerly Michael russ

    [more]
  • $515 AUD May 22, 2013

    [This is a Private Project. You must be logged in to view the Project Description]

  • $463 AUD May 22, 2013

    We all know that Air Conditioners use a lot of energy. I would love to be able to determine how much energy they are likely to use. I know that exact numbers are very hard, but even an order of magnitude would be good. The sort of parameters that I am thinking might be useful include:* Outside temperature, humidity and wind speed* Indoor temperature* Temperature setting and fan speed* Size of Air Conditioner (e.g. 3kW)* Size of space* Insulation in the space (None, Poor, Good, Excellent)* DraftsWhat I would like to be able to say that given all these, an air conditioner will use approximately 2 kWh/h. Increase the temperature by 1C for cooling, and you will save 0.2 kWh. Ideally, this would work with heating and cooling. If there is a model or standard that deals with this, fantastic. If you can provide the model, I can implement it... Thanks

    [more]
    anujgargiitk does not have any open projects.
    anujgargiitk does not have any work in progress.
[see more]

Portfolio

[see more]

Résumé

Experience

Senior Associate (Research)

Nov 2010 - Jan 2012 (1 year)

Premier organisation

o Complete Concept Design, Engineering Design, system simulations and Mechanism Development & Detailed 3D/2D modeling using Autodesk Inventor/ AutoCAD<br />o Stability Analysis & Stress Analysis using Matlab (highly proficient) and C++<br />o Project planning, manufacturing coordination & communication with clients <br /><br />Prominent Projects include Parachute Assisted UAV / Variable stability aircraft, Glider assisted delivery system, Solar UAV

Associate (Research)

Aug 2010 - Nov 2010 (3 months)

Premier Organisation

o Carried out Feasibility Study of Stratospheric Airship<br />o Developed & simulated mathematical models for the airship systems using basics of physics & matlab<br />o Published 6 international research papers<br />

Research Scholar

May 2008 - Jul 2008 (2 months)

Premier Organisation

Understanding the gap phenomenon in µ­EDM using Under water acoustics <br />o Developed a transistor based electronic circuit to give very short duration electrical pulses of high voltage and current to the electrodes. <br />o Discovered a unreported phenomenon of SOFAR (Sound Fixing And Ranging) in µ-EDM process <br />o Suggested a method to predict the shape of the plasma channel based on the SOFAR in ?-EDM. <br />o Analyzed the various existing models of debris form

Education

B tech, Mechanical Engineering

2004-2008