offline
Last seen: Jul 21, 2014 2:04 PM EDT
Hire Me!
Rate: $20.00 USD/hour
Follow Invite to Project
 

cadfreak

Product Design, Industrial Design ,Solidworks

Username: cadfreak

  • Has made a deposit.
  • Has verified their email address.
  • Has completed their profile.
  • Has verified their secure phone number.
  • Verified
  • Payment is verified.

Location: Bangalore, India

Member since: February 2011

Reputation:

4.9/5

(36 reviews)

5.9
[see more]

1 user has recommended this freelancer.

My projects:

  • [Sealed]
    5.0
    Profile image for Seller schibber

    schibber

    Apr 30, 2014

    cadfreak was great!profesional and creative..nice job!

    Project Description:we require an artist or studio that can deliver 10-20 3D models per week. the models will be described in detail by us, and include reference pictures and measurements. our needs are for simple models, we will construct a basic price system based on complexity...
    [more]
  • $184.80 SGD
    5.0
    Profile image for Seller Chuanan

    Chuanan

    Apr 16, 2014

    Awesome work in terms of quality and attention to details. Would certainly like to work on future projects together. Thank You, once again!

    Project Description:We are a start-up looking to built a Smart Watch for everyone. The design must be circular, energetic-looking and fits nicely on the wrists (no extra-large or tiny designs). We appreciated creative and unique products...
    [more]
  • $147.00 USD
    5.0
    Profile image for Seller propmac

    propmac

    Apr 7, 2014

    Good job! I will work with you again. ;)

    Project Description:Design an enclosure for electronic device on the base of circuit board. This is my design which has to be followed. So, go ahead and give me a bid on this little project. NDA has to be sign.
    [more]
  • $275.00 USD
    5.0
    Profile image for Seller cgould

    cgould

    Mar 16, 2014

    Good experience

    Project Description:I need some simple drawings of furniture made. For some I will provide files and ask you to combine elements from each. For some I have a sketch that I would like you to turn into a drawing. I will have several of these to do every few months...
    [more]
  • $100.00 USD
    4.8
    Profile image for Seller CRInc

    CRInc

    Feb 23, 2014

    Great job again. Thank you.

    Project Description:This is Michael Collins, Roger's partner. He is tied up on other projects. I am trying to help him. We have a 3d print of the enclosure and have decided that there is still quite a bit to do. Will you give us a price to complete the following changes to the most recent version of our enclosure? 1...
    [more]
  • $421.00 USD
    4.8
    Profile image for Seller DanielScottG

    DanielScottG

    Jan 30, 2014

    He was very easy to work with and listened to all my concerns. Thank you!

    Project Description:I need a tool that will mushroom and flatten the end of a rivet. This is needed to reattach handles to fire extinguisher. I have a method to do this with a common tool but it is sloppy. I believe that...
    [more]
  • $157.00 AUD
    5.0
    Profile image for Seller mloconte

    mloconte

    Jan 29, 2014

    Very professional. Sent through what I needed when I needed it.

    Project Description:I need an experienced CAD person to update some CAD files to show the cut-outs required on 2 enclosures. A total of 5 cut-out holes. Location of cut-outs already designed. Just need some CAD files...
    [more]
  • $136.00 USD
    5.0
    Profile image for Seller michaelpreston28

    michaelpreston28

    Dec 29, 2013

    Fabulous work on my child's potty seat. Thank you.

    Project Description:Hello, I have this patent-pending potty seat that I need to have some slight changes to. 1. I need the foot pads removed. We've decided to move forward without them. 2. I need the shield wider and slightly raised...
    [more]
  • $186.00 USD
    5.0
    Profile image for Seller webber55

    webber55

    Dec 27, 2013

    cadfreak is amazing to work with. Takes the time to understand your project. Offers very good opinions and suggestions. Worked with him before, will work with him again. Truly an asset to the freelancer community.

    Project Description:I need a CAD file to be made for a PET bottle.. which has compartments. NDA will need to be signed. It is a very simple design so I do not play on paying more then $50.00 for this thank you!
    [more]
  • $166.00 USD
    3.6
    Profile image for Seller Rowe757

    Rowe757

    Nov 21, 2013

    Good work man

    Project Description:Looking for a compostable cover that men can put over the sink when they shave so there is no clean up. I am picturing a saran wrap/silicone type material that can stick/suction to the sink (secured)....
    [more]
    cadfreak has not completed any projects.
  • $20 USD/hr In Progress

    As much as you feel comfortable:part 1: Photo realistic model and hi res output.part 2: Design enclosure and advise on materials, source manufacturing.

  • $30 CAD/hr In Progress

    Email me at andrew.vieira@gmail.com . I would like to Skype first or email for a discussion. Thank you.

  • $150 USD In Progress

    Help with the design drawing and prototype

  • $5 USD/hr In Progress

    We are looking for a Mechanical Designer with a copy of AutoCAD Inventor, or Solidworks, to create a dimensionally accurate 3D model of a Belt Conveyor Module. The project will involve approximately 6 Machined Steel parts (very simple), 6 Sheet Metal parts (also very basic and mirrored designs so really only three models that are unique), 6 Machined sections of Structural Steel, 4 machined plastic parts (simple), and 18-20 Purchased parts that need to be drawn to show on the assembly.We need these parts to be modelled in CAD then assembled showing relevant hardware, and constraints so that the model can be simulated with motion, and interference checking. Some basic FEA should be performed to the structure to ensure the assembly can withstand the loads. The 22 Machined or fabricated parts will need working drawings with a customised drawing format for our company. We can supply some concept images and some .step assemblies of the basic design, but these files are not dimensionally perfect so we expect these to be recreated with Inventor or Solidworks, so that variations of this assembly can be easily generated. i.e. If we want to lengthen or shorten the design, we can make changes at the final assembly level, then generate new drawings.The Belt Module is approximately 2800mm long, 300mm wide, and 250mm tall. The attached image is not the complete structure, but it shows the basic core of the assembly.

    [more]
  • $50 USD In Progress

    I am looking for a freelancer that I can continually send products to for 3D renderings to designed in Google Sketchup. We own a 3D printer that works directly with Google Sketchup and we would like to print off some of our products for actual production use but we lack the 3D drawings in order to complete our goal. These are primarily small plastic components due to the size limits of our 3D printer - 6"x6"x6. These plastic components are items that we would be using on our machinery so these 3D renderings would come with a requirement that they are extremely precise. Please see the enclosed example image of one of the products and let me know if you are interested in this project and long term business opportunity.

    [more]
  • £50 GBP Jun 16, 2014

    First of all please have look at the project briefing pdf uploadedDesign a hand powered device to combine and compact used soap scraps into a largesingle bar. The device is to be designed to reuse old scraps of soap forming them into newbars. It is thought that some sort of mechanism will be required during the compacting orsqueezing operation. To enable very hard old scraps of soaps to be compressed, it isrequired that water is added somehow during the combining / squeezing operation. Thedevice is to be designed for domestic use and as such it should be designed as a complete“Product”, something which could, and would be bought in a shop.”Detailed Specification1) The device, when being operated, shall be able to be wall or table mounted.2) When not in use, the device shall stow or fold into a 400mm x 150mm square, spatialvolume, and have the facility to be hung/ stowed on a wall.3) The device is to be hand powered alone to compress /compact the soaps.4) The device shall use water as a means of softening the soap scraps.5) The device during operation shall be water tight, and have filling and drainingfacilities.6) The device shall be designed for ease of cleaning.7) The device shall be safe to operate, and stow as in (2)8) The device shall be designed for mass manufacture,100,000 units sold/ year9) The selling price of the “ Soap Compactor Product” is to be £35 each based on (8)10) The device is to be designed in accordance with British Standards for Domesticdevices.11) The total mass of the device is to be no greater than 2kg dry (without any wateradded)12) The design must cater for right or left handed users.

    [more]
  • $1250 USD Mar 26, 2014

    looking for a realistic industrial design image of my digital headphones

  • $210 SGD Mar 11, 2014

    design 3d model based on my client"s requirement so that i can 3d print it for them.must be singaporean

  • $178 USD Mar 3, 2014

    Design a product that I"d like to prototype, likely in a heavy plastic.Person should be in Bangkok, Thailand

  • $10 USD Feb 5, 2014

    Hi Cadfreak,This is Michael Collins, Roger"s partner. He is tied up on other projects. I am trying to help him. We have a 3d print of the enclosure and have decided that there is still quite a bit to do. Will you give us a price to complete the following changes to the most recent version of our enclosure?1.Flip DC jacks with audio jacks.2.Evenly space jacks with 5.5mm between each one. Both types of jacks are 9mm wide. Total width of PCB is 85mm. These add to 85mm:a.Left clearance, 20.75 – 4.5 = 16.25b.DC In = 9c.Space = 5.5d.Blower Out = 9e.Space = 5.5f.Pit probe = 9g.Space = 5.5h.Meat probe = 9i.Right clearance = 16.253.Move PCB mounting hole on top because it currently conflicts with LCD header.4.Add a feature (lip and groove?) to create engaging fit of top and bottom. Bottom should fit inside of top.5.Move and size of port for membrane buttons. Rotate port 90 degrees. It should be positioned horizontally and centered 6mm above top of buttons. Dimensions: 13x5mm6.To have the textured finish that we desire, all exterior sides require 5% draft.7.All other surfaces (interior) require at least .5% draft including bosses and gussets.8.Change port identification from recessed to raised text to avoid thin areas in the enclosure.9.Reduce thickness of PCB support bosses. The thick bosses create sink risk. Use gussets or hollow out bosses to maintain strength. Use thin gussets to reduce sink.10.Hollow out the bosses supporting the inserts in bottom.11.Enclosure top and bottom should meet at the center of audio jack jacks. PCB will be modified to extend DC jacks to be flush with enclosure requiring rectangular ports for DC jacks.12.Consider how along with item #4 we might fasten the top and bottom without the 5th screw (center below LCD). This may occur naturally by implementing item #12.

    [more]
  • $147 USD Jan 25, 2014

    I am working on a skateboarding accessory product and I need help perfecting my C.A.D. design. I have a rough draft C.A.D. design right now (which will be forwarded to you, if interested). The design consists of a base, rod and screw top design approximately 9.75 inches tall. The base of the product will be 1.75 inches wide. The rod section will be 8mm thick. More details will come when the appropriate designer is selected. The rough draft took under 2 hours and is almost perfect, I am looking for refinement of design and perfection.Thanks!

    [more]
  • $222 USD Nov 18, 2013

    Design a 3D CAD Tanning Device for Prototype/ manufacturing

  • $5555 AUD Nov 10, 2013

    Hi,I am building a supply chain consulting company, which focuses on small and medium scale engineering industries in Australia. Our company provides customise end to end supply chain solutions by analysing their business needs.I am, currently looking for sourcing professional who is based in India and China and willing to work as partner in this company in developing and implementing supply chain solutions.

    [more]
  • $444 USD Nov 10, 2013

    Dear Sirs ,I send you my best regards for you and your entire team.Note: Please note that , now we looking For: Designer 3-D Chinese Employee in Yemen .I look forward to your reply as soon as possible . All the best , Naser Ba abbad

    [more]
  • $1111 CAD Oct 24, 2013

    Need a prototype made for a borosilicate (heat resistant and very strong) glass container with silicone gaskets. Will need to be food-safe. The designer will receive lifetime royalties if their prototype is chosen.

    [more]
  • $60 USD Aug 4, 2013

    I would like to design and manufacture an inexpensive temporary car window. It would consist of a wire frame with a simple locking mechanism that would fit and mold into the frame of the broken window. It would have to be reversible. With a material like the windbreaker pants like a polyester. The frame would be small and it would expand into the window protecting the car. Not for security but for aesthetic use and against rain. Something like those expanding clothes hamper or the sun visors for the front window but for the side windows.

    [more]
  • $157 USD Jun 23, 2013

    I need a simple CAD"s for unique iPhone case design that I sketched. This CAD needs to have accurate dimensions in cm (iPhone 4s and 5 case sizes) so that a mold can be manufactured for prototype. *All CAD files needed and Blueprints of individual parts*

    [more]
  • $250 USD Apr 1, 2013

    The freelancer shall make a clever and good-looking design of a universal mobile phone charger, and deliver three suggested designs as high-resolution full-color image files (such as .jpeg). The freelancer shall also deliver a suggested logotype design based on the Product name which will be given separately.* The charger is one-piece and inserts directly into a Power socket (mainland Europe types, )* The body of the charger shall be cylinder/can shaped (except for the Power plug, which shall be Europlug)* There shall be a compartment at one end of the cylinder, covered with a lid attached to the charger body with a simple plastic hinge so it doesn"t disappear. Said compartment is intended to house a low-voltage Cable having the common USB plug in one end and mobile-phone specific (for this Project, use iPhone plug) in the other end.* The rest of the cylinder body shall contain the Electronics .The Electronics inside the charger needs to be about 30 cm3 in size.* The charger shall have a socket for attaching said low-voltage cable, located somewhere suitable either inside or outside the lid.* There shall be a snap mount for the low voltage Cable which can be used to keep the Cable it attached to the charger so it doesn"t disappear.* The design shall be practical for mass production.

    [more]
  • $100 USD Mar 30, 2013

    I am an artist who needs somebody who can take my basic drawing ideas and re-create them into CAD.This basic idea may also be a list of existing furniture and an explanation The designs need to be in various softwares so that i can pass them to my manufacturer so they can make my product.The manufacturer i use says that he uses the following below:formats autocad, rhino, catia, solidworksI am not a big company , I am an artist working on my own so i cannot pay high prices but may give repeated work if the designer is reasonable priced. please contact me for more information.ps : i can send sample work in pm only

    [more]
  • $150 USD Oct 10, 2012

    Looking for some vendors who have experience in Auto CAD and Pro EG Technology.Please provide the details and pricing with time line.

  • $20 USD/hr Sep 27, 2012

    I want to design a sleeping cabin of size L * B * H - 2 m * 1 m * 1.2 m . In which all facilities like centralized AC, TV, Alarm, FM, Table lamp, fully secured. Please see the pics.

  • ₹75000 INR Sep 25, 2012

    I need the attached product modeled in 3D in two different variations. One, just the device itself, and one with a phone attached. I will need these to be fully rendered and colored. It"s a pretty simple device that has excellent implications. Please only series inquiries. If you send a "copy/Pasted" message I will not respond. Thanks, LFBR

    [more]
  • $1200 AUD Jun 17, 2012

    Hi everyone,We are seeking Solidworks/CAD Design work for eventual manufacture purposes of various high quality electronic server products enclosures. These products are usually sheetmetal & cast alloy however some are heavy duty plastic. Some products are IP66, some are not. *** Please note ***We are only seeking highly qualified designers in Bangkok city area as site visits would be required in the coming days as of 17th June 2012. This way we can bring along real samples for your/our convenience and discuss further requirements. We have plenty of work for the right designers.

    [more]
  • $20 USD/hr Jun 9, 2012

    need an ipad stand designed

  • $250 USD May 6, 2012

    I need a fully (or partially) rendered 3 dimensional model of the needle body and safety cover for a 21 gauge 1.5" crown brand disposable syringe needle.The model needs to be expandable and explodable, it is required for presentation and design purposes, this is to be viewed and manipulated by lay people so needs to be in a format that can be rotated and deconstructed using non-technical commands.both the needle body and the cover need to be separable, independently manipulatable and explodable. Correct colour coding and textures would be highly beneficial.Once the preliminary model has been received there is potential for ongoing adaptive work as well as secondary projects of this type

    [more]
    cadfreak does not have any open projects.
    cadfreak does not have any work in progress.
[see more]

Portfolio

[see more]

Résumé

Experience

Product Design Engineer

Jul 2010 - Present (4 years)

Lumium

LUMIUM delivers groundbreaking innovations, products <br />and brands through extraordinary experience and top talent.

User Experience Designer

Jun 2006 - Jun 2008 (2 years)

Delloit

A Leading IT Solution Provider

Education

M.Des [Masters of Industrial Design]

Indian Institute of Technology, Delhi

2006-2008

Certifications

Award

IIT Kharagpur.

The Concept “PORTABLE URINAL” Won Second Prize in GLOBAL ENTREPRENEURSHIP SUMMIT 2010 conducted by the Entrepreneurship Cell,IIT Kharagpur.

Professional Certificate

Society of Indian Automobile Manufacturers (SIAM)

The Electric vehicle concept “TURTLE “ was shortlisted in best 10 entries national level for SIAM-Automotive Design Challenge[ ADC-09 ] ”MOBILITY FOR INDIAN YOUTH 2016”

Professional Certificate

ROYAL ENFIELD MOTORCYCLES Ltd

Project “MOTORCYCLE AMBULANCE FOR VILLAGES IN RURAL INDIA” Sponsored By ROYAL ENFIELD MOTORCYCLES Ltd.

Award

ET & OK PLAY Plastics

The concept “WHEELCHAIR ASSISTANCE “ has been shortlisted in ET & OK PLAY Plastic Design Contest 09 .Waiting for final results.

cash award

Ussabilitymatters.org

Two out of the 10 Best Selected entries in UMO [Ussabilitymatters.org] – Global bad Design Identification Forum 2008

Award

ERGO HELMETS Ltd

Graphics Designed on Helmet, is being produced By ERGO HELMETS Ltd