offline
Last seen: Jul 11, 2014 6:13 PM EDT
Hire Me!
Rate: $20.00 USD/hour
Follow Invite to Project
 

mashinac

3D Modelling Designer - 3D Animation Producer - Engineering Drawing Expert

Username: mashinac

  • Has made a deposit.
  • Has verified their email address.
  • Has completed their profile.
  • Has verified their secure phone number.
  • Verified
  • Payment is not verified.

Location: Žabalj, Serbia

Member since: January 2014

Reputation:

5.0/5

(25 reviews)

4.3
[see more]

1 user has recommended this freelancer.

  • $35.00 USD
    5.0
    Profile image for Seller Confisk8d131

    Confisk8d131

    17 days ago

    Fantastic work, assisted me with a complex project, and took the time to get the project right. Will hire again for any future Solidworks work! Thanks!

    Project Description:Hello - We are looking for somebody that has experience in either Solidworks since we need to make some small adjustments to a wristwatch that we are designing. We need to make 4 small changes ,so this...
    [more]
  • $490.00 AUD
    5.0
    Profile image for Seller PersonalSurvivor

    PersonalSurvivor

    May 20, 2014

    Fantastic work

    Project Description:Design a mouth piece and cap that screws into a flexible water bottle for people to able to drink, This squeeze bottle, will have a special filter that has been designed by us to remove virus, bacteria and chemical...
    [more]
  • $25.00 USD
    5.0
    Profile image for Seller elenakara

    elenakara

    May 10, 2014

    great work!

    Project Description:Hello, I have a ring design which I need to be made in rhino or cad or any other 3d software so I 3d print it. I will provide a sketch/ image. thank you
    [more]
  • $100.00 USD
    5.0
    Profile image for Seller digisoap

    digisoap

    May 5, 2014

    great more then expected.

    Project Description:I need a new 3d design for a product I am creating. I also need it to be a printable file for a 3d printer. I have some base 3d files, but the new design has many changes so fresh start may be the best start...
    [more]
  • $35.00 AUD
    5.0
    Profile image for Seller kwaka100

    kwaka100

    May 5, 2014

    Extremely satisfied. Went above and beyond to ensure everything was as it needed and was very helpful for my urgent project. Would recommend to everyone and can hopefully work with again. A+++

    Project Description:WORK REQUIRED ASAP. NEED COMPLETED WITH THE NEXT 1-2 HOURS ! The task is to model the attached drawing as an assembly. The model is required to be to spec and fully defined, the model will be used for...
    [more]
  • $25.00 USD
    5.0
    Profile image for Seller elenakara

    elenakara

    Apr 28, 2014

    great work and really professional!

    Project Description:Hello, I am looking for someone to create a ring design on Rhino or any other 3d modeling program which I will later 3d print. I have provided an image of the ring and we can discuss specifics. Thank...
    [more]
  • $50.00 USD
    5.0
    Profile image for Seller jyt123

    jyt123

    Apr 21, 2014

    "Good job done, i will hire him again"

    Project Description:Looking for 3d modeling support for assignment, details will be sent after awarding.
    [more]
  • $70.00 SGD
    5.0
    Profile image for Seller leungcy

    leungcy

    Apr 19, 2014

    very very fast and very good quality!

    Project Description:aspect ratios
    [more]
  • $55.00 USD
    5.0
    Profile image for Seller Aphello

    Aphello

    Apr 18, 2014

    Excellent 3D artist. Highly recommend. Hard work ethic and clear communicator. Will definitely use again for 3D projects.

    Project Description:Who can render from .stp files eyeglass frames? For this immediate project, we would like to see the attached file rendered in 5 different color/textures. I've attached pictures of the colors/textures to be rendered in...
    [more]
  • $20.00 SGD
    5.0
    Profile image for Seller leungcy

    leungcy

    Apr 18, 2014

    very fast and very well done!

    Project Description:analysis for aspect ratio
    [more]
    mashinac has not completed any projects.
  • $250 USD In Progress

    [This is a Private Project. You must be logged in to view the Project Description]

  • $27 USD/hr In Progress

    We are water purifier company based in Hong Kong . Recently we would like to design and produce our own functional water purifier by our owns . Layout design or outlook design already done by designed . But we would like to have solid work experts work together the internal parts . Our job aims to design , draw the component insides the part based on existing component or real parts . Assembly it to be workable parts .

    [more]
  • $10 USD/hr In Progress

    I have ongoing work related to our previous project "Design a mouth piece and and cap for collapsible water bottle"

  • $16 USD/hr In Progress

    Hey to all i have reopen the project as you requested

  • $111 SGD In Progress

    Hi all,We are looking to model this engine part. Please see attached image. No texturing needed. We will use photoshop to indicate the dimensions but meanwhile you can start the modelling. Kindly bid in SGD. Thank you.

    [more]
  • $15 USD/hr In Progress

    detailed model of a Metal detector, Metal detector receiver,

  • $166 USD In Progress

    Dear friends. We have an amazing design for a Bluetooth earpiece we are looking for a person to do the product design and 3D rendering of our ideas. we have around 5 different bluetooth design which we need you to help us with the design and 3D modeling. . This is not a engineering job. Your finial copy will help us to show the supplier our design and get quote from manufacturing. Also it will help us to survey different people about our design. Hopefully your design will also assist us to present our idea to investors too.The finial copy need to look at realistic as possible. it need to be amazing realistic as possible . How long. we need 5 x 1 min video or 3D rendering. Going around the ear. show the bluetooth earpiece from front , back , and may be even show it as people are talking to it. When: We need this to be done in the next 2-3 weeks. Design: We have the initial design and initial ideas (real pictures) . we have all the appropriate drawing and we need you to bring it to the life. - You need to design the ear piece and the part that goes around the ear. - you need to show us your past work .

    [more]
  • $10 USD/hr In Progress

    I have ongoing work related to our previous project "Scale drawing"

  • $21 USD/hr In Progress

    I need a design of simple housing for my electronic board, i have Wanhao 3D Printer we may make tests.I don"t have exact dimensions and design idea. We must create it together.Regarding the project is not so clear i prefer to work hourly basis.I want biders to be experienced in solidworks, mechanical design and 3D printing.

    [more]
  • £111 GBP In Progress

    The attached image is a front view of the model we need creating in Solidworks. It is a 3D model with 2 parallel springs. The things to note for this design is the two parallel walls will include vertical runners to allow the test piece to move in the vertical plane. The walls them self will be placed on horizontal sliders to allow the test piece to be aimed. The holders will need to be flexible holders, to allow for different angles of the test piece. The depth of the walls will be 2-3m (undecided). The springs will be placed in the centre - of course. The Mass is raised by the Pulley. The mass will need to be a cylinder with a diameter of 0.3m , and a length of 0.4m. Any more questions please ask. We need high quality and professionalism.

    [more]
  • $100 USD 12 days ago

    Convert 12 Sketch to 3D Modelling & 2D Detailing.Output Formats / Requirements1) 3D Model (Only Solidworks, any version)2) 2D Detailing for Manufacturing ( .Dwg )

  • $100 USD 13 days ago

    Convert 12 Sketch to 3D Modelling & 2D Detailing.Output Formats / Requirements1) 3D Model (Only Solidworks, any version)2) 2D Detailing for Manufacturing ( .Dwg )

  • £5000 GBP 14 days ago

    Take 3D model, produce drawings, project manage the sourcing and manufacturing of components. Hands on involvement with assembly.

  • $222 USD 14 days ago

    -Actualizacion de dibujos en papel a archivos digitales (pdf, .dwg, .step, etc)-Consultoria y asesoria-Modelado 3D

  • $35 USD 14 days ago

    i need 3d model and i need it to be ready in 24 hoursill send the attachments describing everything

  • $166 USD 14 days ago

    We have a component to be manufactured from plastic using pressure mold, and need to convert the .STL or .IGS file into a SolidWorks file. We need the SolidWorks file of the shape in order to CNC the mold. The component was designed in Rhino, and we need assistance in converting to SolidWorks with no errors.We need 0.01 mm precision; up to 0.05mm precision is negotiable. The SolidWorks file must be the same shape as the one uploaded as .STL or the .IGS file.If you need, we can also provide you with the Rhino file (.3dm), or another file format which can be exported from Rhino directly. NOTE: One possible solution is to use the SolidWorks add-on advertised here: http://www.sycode.com/products/stl_import_sw/ This add-on is supposed to convert .STL into SolidWorks. We have not tried it, as we don"t have SolidWorks installed - but given the affordability of only $30 for 1 week - this should get a try. We expect that this project will not take more then one or two hours for the right candidate. Please place a total budget accordingly.

    [more]
  • $30 USD 16 days ago

    take art line drawings andconvert them to production ready DXF files to send to laser cutter

  • $30 USD 18 days ago

    Candles are routinely sold in glass jars, and most have metal or glass lids. We are looking for a design concept that is functional and aesthetically pleasing to replace these lids with plastic lids. It is important to note that glass jar diameters tend to change, so the part must be able to accommodate a wide diameter tolerance. The part will be injection molded, so it is vital that the part be designed so that it can be ejected from the mold. The goal is to produce a part at the lowest possible price with the target being less than 15 cents. Low cost materials such as polypropylene and polystyrene will be considered for the lid. "We have a fistful of variations on the lids already being produced and are looking for someone thinking about a solution in a whole new way! A simple sketch with a concept we can pitch wins the contest and the opportunity to negotiate a contract to do the actual design work.

    [more]
  • £211 GBP 19 days ago

    I want to turn this model into a watertight model, and then turn it into a perfectly solid body. I need it to be usable in ANSYS-Fluent simulation as well as 3D printing.

  • $250 USD 20 days ago

    Private Start-up Organic Premium Vodka label seeks a multi-angle 3D rendering for a bottle. The design should exude luxury and minimalist sophistication. Design should also include silver and green accents, while integrating a mix of clear/opaque glass. An example of the finished products format is attached. Design fee is negotiable.

    [more]
  • $1250 USD 21 days ago

    I am looking for help developing a prototype for my idea. It requires a remote controlled servo motor that moves a light frame. The motor needs to be powered by a portable power source.

  • $166 USD 25 days ago

    Translation of an online travel agency website.Source language: EnglishTarget language: SerbianVolume: 22.000 wordsImmediate startOffers from native speakers of the target language will be accepted only.The project will consist of two stages:- translation (1st translator),- proofreading: check and corrections of the live version of the website (2nd translator).We would like to receive:1) your best quote - cost/per word rate and time frames - for translation only (22.000 words), 2) your best quote - cost/per word rate and time frames - for proofreading only - checks and corrections (22.000 words).3) a brief description of your experience.Please specify whether you include Elance fee and VAT in your offer.Project details:We use an online platform called Transifex for organising our translations. Both the first and the second translator (first the translator and after that the proofreader) will perform translations and corrections directly through this platform. Please bear in mind that some strings (separate words/phrases/sentences/paragraphs) contain parts of html code which should remain untranslated (e.g. %{distance} km from destination - in this case you do not translate the part of the code (%{distance}) and only translate the rest of the phrase). You will receive a comprehensive guide describing the usage of the platform in detail and will be provided with constant support during the translation process. The possibility of future cooperation is highly likely - we would appreciate a long-term fruitful relationship on support and ad-hoc projects.****Translation strings examples:Change/Cancel your Hotel ReservationReservation detailsPlease notify us if you would like to proceed to a new reservationYou have not yet bought your tickets and you won"t be able to travel before proceeding with the payment.We would like to inform you that according to the airline"s policy in case of cancellation there is a penalty of ... If you would like to proceed with changing your tickets, there is a penalty of ... plus any fare difference. Following your latest inquiry to resend you a copy of your invoice for the reservation: ..., please kindly click on the links below to view/save/print your invoice:You must present a photo ID when checking in. Your credit card is charged at the time you book. Bed type and smoking preferences are not guaranteed.Your reservation is prepaid and is guaranteed for late arrival. The total charge includes all room charges and taxes, as well as fees for access and booking. Any incidental charges such as parking, phone calls, and room service will be handled directly between you and the property.

    [more]
  • $1500 USD 25 days ago

    Hello. I have 100 different rings that need to be CAD drawn, and rendered. I have attached an image of one of the most difficult rings. If you can draw it to this quality, please let me know, and give me a price. There will also be images of plain solitaires needed.Most rings will need to be drawn with different size and shape centre diamonds.Ie round .5ct .75ct, 1ctPrincess .5ct, 1ct, 2ctEmerald .5ct, 1ct, 2ct.This will add even more to the work. But there will be around 100 different designs, PLUS the variations. Please quote me for the initial 100 images please.

    [more]
  • $666 USD 26 days ago

    Hello, I need some one who can help me modelling this UFO in Solidworks 2014. There will be a lot surface modelling require. And a lot of detail. Think of the movie "ID4". That is kind of what I"m looking for. I already have the blue prints for the UFO so as long as you can match it 95%, we should be good. The over size of this UFO is 24" x 24" x 9". The width and length are the most important here and the height will be whatever it is when you scale it. Also, when you modelling this. Pleas keep in mind that i want them in assembly format, not one single large part file. The two surrounded wings, upper dome, main body, lower body, and the thrusts.Feel free to contact for any question. thankstor

    [more]
  • $55 USD 29 days ago

    Required analysis of our product in solidworks or other software. simple task, details will be provided selected bidder.

  • $277 CAD Jun 11, 2014

    I need a product blueprint made, then a prototype made off of it. A WORKING PROTOTYPE. I will send you a picture of what I would like it to look like. Need 2 prototypes made. Also will send all the features. Need it to be electronic. And good plastic. Picture is attached. Can you do it? I"ll pay whatever it takes (be reasonable).

    [more]
  • £23 GBP Jun 10, 2014

    pattern cutter sample machinst

  • $155 USD Jun 8, 2014

    Convert 2D Drawings into 3D CAD or Solidworks Models

  • $22 USD/hr Jun 6, 2014

    I need 3D randering professional to work with existing Solidworks models of household items and create in setting renderings for presentation. Some models aren"t complete and will need to be finished or redone in SW.You need to be able to work with SW files. I will need to see some photo-realistic (preferably interiors) renderings in your portfolio to be considered.Thanks you!

    [more]
  • $155 USD Jun 5, 2014

    •Drafting 2d and 3d drawings.

  • $122 CAD Jun 5, 2014

    I have drawn rough designs of something I"d like 3d printed and need a CAD design to enable the printing of said item. I can explain in further detail later, but it is about the size of a pinky finger or smaller.

    [more]
    mashinac does not have any open projects.
    mashinac does not have any work in progress.
[see more]

Portfolio

[see more]

Résumé

Experience

Project engineer

Feb 2013 - Present (1 year)

Jomapeks D.O.O

Working as project engineer with working tasks:<br />1. New products developement<br />2.Tehnical documentation<br />3.Making user and assembly manuals<br />4.Making 3D animations and principle of work for products.

Education

BSc Mechanical engineer

2008-2012

Certifications

province 3D modeling contest

Society of High Schools of Serbia

Contest in 3D and 2D modeling with theory forom tehnical scienses. Took second place.

Publications

a

a

a