offline
Last seen: Apr 24, 2014 4:32 PM EDT
Hire Me!
Rate: $50.00 USD/hour
Follow Invite to Project
 

Michal Eliasz

Electronic Prototypes

Username: miceli

  • Has made a deposit.
  • Has verified their email address.
  • Has completed their profile.
  • Has not verified their secure phone number.
  • Verified
  • Payment is verified.

Location: Gdansk, Poland

Member since: August 2011

Reputation:

5.0/5

(16 reviews)

5.8
[see more]

1 user has recommended this freelancer.

My projects:

  • $170.5 USD
    5.0
    Profile image for Seller netboss

    netboss

    Jan 25, 2014

    I couldn't ask for a more professional job. Micelli is great at communications and his comments on improving my project were dead on. Don't hesitate to use this Freelancer for any electronics project.

    Project Description:I have a schematic in PDF format that I need entered into DesignSpark. The project has about 16 ICs, 10 headers, 9 - 18 pin LED displays, 23 mechanical switches, 100 caps and resistors, 20 misc. components...
    [more]
  • [Sealed]
    5.0
    Profile image for Seller SDLJS

    SDLJS

    Nov 9, 2013

    Very thorough work; yet delivered on time. Excellent and prompt communications. Will definitely hire again for future jobs.

    Project Description:Hello, Our company is looking for an experienced PCB engineer to review our existing schematics for an Intel Atom-based PCB board. The majority of the schematics follow reference designs provided by the providers of the major components (we will provide them to you upon signing NDA)...
    [more]
  • [Sealed]
    5.0
    Profile image for Seller nickarfara

    nickarfara

    Sep 16, 2013

    Delivered 3 days before! Excellent quality and perfect communication! Glad to work with this professional freelancer! Thank you!

    Project Description:I want to design a 4 layer PCB. I have shematics and few libraries. Manual routing NOT automatic. I want the design to finish in 1 week. Contact me for more details.
    [more]
  • $30 USD
    0.0
    Profile image for Seller rs1936

    rs1936 [ Incomplete Report ]

    Jan 18, 2013

    Stopped in the middle of the project with no communications.

    Project Description:Michal, As per email.
    [more]
  • $60 USD
    5.0
    Profile image for Seller rs1936

    rs1936

    Jan 15, 2013

    Attention to detail and produces quality work. Will strongly recommend.

    Project Description:I have schematics and PCB layout in Altium 10. I need the two connected and synchronized. This should not take long for someone who knows what they are doing. I will provide the Altium Project files consisting of PCB, schematics, Schematics in PDF format, BOM in Excel format...
    [more]
  • $100 USD
    5.0
    Profile image for Seller Beech

    Beech

    Jan 6, 2013

    Excellent communications and accurate.

    Project Description:We require an expert Eagle PCB designer to create two Harting 32 pin connectors with comprehensive layer make up including ident, solder resist, layout, and drilling detail. The two Harting parts are:...
    [more]
  • $350 USD
    5.0
    Profile image for Seller tw2012

    tw2012

    Oct 15, 2012

    Another excellent pieces of PCB design.Total understanding of our requirement.

    Project Description:Small PCB for Pressure and temperature monitoring
    [more]
  • $500 USD
    5.0
    Profile image for Seller tw2012

    tw2012

    Jul 29, 2012

    Good quality work, on time and on budget.Will hire for our next PCB project

    Project Description:[This is a Private Project. You must be logged in to view the Project Description]
    [more]
  • $500 USD
    5.0
    Profile image for Seller TrevorPowell01

    TrevorPowell01

    May 22, 2012

    Miceli has now delivered two projects, both to an excellent standard, and we look forward to the next engagement.

    Project Description:Prepare: 1. Schematic in PDF and DWG format with electrical connections, (all additional protection components, etc) 2. Bill of Materials (electrical components from schematic such as blocking, bypass diodes, etc) 3...
    [more]
  • $210 USD
    5.0
    Profile image for Seller metersystems

    metersystems

    Apr 29, 2012

    Excellent Freelancer, understood the brief, would recommend and work with him again!! well done!!

    Project Description:Please see attachment, PCB design required for this Power supply. Input will be 12vDC +/-1v. 4 outputs required: 34Vdc, 12Vdc, 5Vdc and 3.3Vdc. PCB design only required. i wll produce prototypes. Please use current spec as per attachment Eagle PCB and BRD files required...
    [more]
    Michal Eliasz has not completed any projects.
  • $555 USD In Progress

    We are looking experienced ALTIUM PCB designer. The need to correct the PCB design to meet the requirements of EMC/ESD compliance (both emission and immunity) and improvements.Scope:- migration from 2-layers PCB do 4-layersPCB (add internal planes)- additional components for better EMI immunity and lower emission- transfer stepmotor driver on PCB directly (instead of "piggy-back" modules)- change THT connectors (3.5mm and 5mm raster type) to the edge connectors- change some THT components to the SMD version- modeling 3D of whole PCBSize of PCB must stay the same.Buyer provide:- schematics and PCB files (Altium Designer format)- suggestions and proposalsContractor provide:- Altium Designer source files (schematics, PCBs, Project etc.)- DRC free test report- gerber files- BOM + estimated unit cost each component @ MOQ=1000 units based on Mouser, Farnell, Digi-Key, etc.

    [more]
  • [Sealed] In Progress

    It is required to design and layout a PCB with elements indicated below and in attached file.Docx File can be downloaded from here.https://www.dropbox.com/s/ogqbxkueuwmdtl4/12DEV%20pcb%20Layout.docx-12 volt connection socket-12v to 5v conversion module with 3 USB Female connections-12v to 9v conversion to connect to XLR mic pre-amp (existing product iRig Pre)-4 port USB hub-FM transmitter with frequency switch (existing product may be used)- Audio in/out jacks 3.5mm-Audio amplifier for 1W speaker-Audio In and Audio out split points with 3.5 connection jacksI do have example existing products that can be re-designed to provide the base for this project. However if you have knowledge on how to make them- that would be beneficial.-FM transmitter-USB hub-XLR microphone pre-ampI will need to consult with you about how can this be done best. We will work together on identifying the size of PCB etc.The outcome of the work has to be the file that can be submitted to electronics manufacturer for processing.

    [more]
  • $833 USD In Progress

    The project is to take the firmware and schematic of a pic 24 series device and replicate it using atmel atxmega series IC. For more info contact

  • $277 USD In Progress

    Hello,I need to make the electronic switch.Please find attached the explanation.I am looking forward to hearing from you.Thanks and best regards.

  • €555 EUR In Progress

    Hi,I am Ibrahim KAMAL, manager of IKALOGIC company in France.We are specialised in the field of embedded electronics, and we build Logic Anayzer. We are currently working on many new products, and we can"t find the time to maintain our blog and regularly write content about our products.We need to hire a part time blogger who has strong electronics background to write 3 or 4 articles per month for us.We can send you free samples of our products, and all we ask is that you use them in a way or another to describe how they can be used to make life easier for electronics enthusiasts! (like this article for example http://www.ikalogic.com/sniffing-cmos-camera-initialization-sequence/)Thank you very much,

    [more]
  • $500 USD In Progress

    Our requirement for remote controlled eye testing unit, it able to play / show jpg, GIF, png (all images formats), swf, videos (all formats).Remote to be used for call / navigate files, please see the attached images.Port Required: USB, Sound.It will work on DC adapter & Battery Display LED screen size 15" & 18.5"

    [more]
  • $1200 USD In Progress

    Specifications• Quad band GSM 850/900/1800/1900 MHz (2G)• GPS Position Accuracy 5m - 25m• Hot start 1sec.,average• Cold start 36sec.,average• Fallback GSM position (approx 200m accuracy)• Dimension 110mm x 23.5mm (diameter)• Motion Sensor• Voltage 3.7V (Lithium Ion rechargeable)• Comes with USB charging system• Average Current When stand-by < 17 microamp• The device is completely configured by SMS text message.

    [more]
  • $750 USD In Progress

    Design a circuit and PCB for an Altera Cyclone IV FPGA, including gigabit ethernet (x4), serial, and some general purpose I/O. USB host or SATA support would be a bonus.The design needs to include similar functionality to the Altera development kits, in having SRAM (32bit x 2Mb), Flash (8-bit x 8M), EEPROM, SD card, and the ability to be programmed using JTAG or program itself using a serial configuration device.The implementation is different to the Altera development boards, with different GE PHYs, and different memory, so it cannot be a copy of those.The PCB needs to be in a form that can be used by a typical PCB fabrication business.

    [more]
  • €400 EUR In Progress

    Grid-tied inverter: Schematic and LayoutYou get from me the circuit as PDF file and the list of the components with link to the datasheet as Excel file.Project Deliverables should be:---Schematics and library---PCB layout and footprint library---PCB gerber/drill for PCB fabrication---PCB BOM, assembly drawings and pick and place file for PCB prototyping.Supports, suggestions and Optimizations on the circuit are desirableDeadline of the project is 25 days.Tools: Eagle version 6.x Or Orcad Version 16.5

    [more]
  • £250 GBP In Progress

    design a PCB as small as possible with a micro controller on it. the PCB should be round and diameter of the PCB should not be more than 5cm. The basic function of the PCB is that there will be a camera attached to the micro-controller which will take images initially for at least a minute, and these images will be stored in an external memory, these images will then be transmitted wireless through an external port. to find a suitable micro-controller , and memory choice with complete analysis is also included in this project, the preferred micro-controller is pic32mx series. all the software used , all the schematics and programming should be presented in a complete document form. power system is also included in it. it might not a single PCB or layers of PCB but then the thickness should not be more than 4cm. its more of a research based project to find out how compact a design can be. so keep in mind both the perspectives i.e. hardware and selection of the components through research. this project is needed to be done as soon as possible.

    [more]
  • $555 USD Today

    We need to quickly draw a PCB within the area supplied. We are providing you with a schematic and a draft of PCB for you to draw.Interactions will be: show component placement to confirm with manufacturing, draw all electrical connections and then document with the source files all the work done including the gerbers for production.We are used to work with Altium Designer and we prefer to stay with it. If you work with other soft, you should be able to export it for us. The circuit is an arduino-compatible device but has other connectors. We are usign PCI-e but there are no high speed data lines.

    [more]
  • $3333 USD Today

    You would be creating a system for interfacing a GMRS / FRS transceiver with a MCU such as a PIC32 or similar. The software application on the PC side or on the embedded browser of the MCU must allow for control of the GMRS / FRS transceiver. Such as audio, mic, freq selection, and other control aspects.

    [more]
  • $555 USD 12 days ago

    I have a built pcb and i am using the PIC kit 2 programmer by Microchip.I just want some one to help me detect the programmer with the software MPLab.I have the coding too.Basically i need the programmer to be connected the pcb and run it.

    [more]
  • $500 USD 12 days ago

    We are looking experienced ALTIUM PCB designer. The need to correct the PCB design to meet the requirements of EMC/ESD compliance (both emission and immunity) and improvements.Scope:- migration from 2-layers PCB do 4-layersPCB (add internal planes)- additional components for better EMI immunity and lower emission- transfer stepmotor driver on PCB directly (instead of "piggy-back" modules)- change THT connectors (3.5mm and 5mm raster type) to the edge connectors- change some THT components to the SMD version- modeling 3D of whole PCBSize of PCB must stay the same.Buyer provide:- schematics and PCB files (Altium Designer format)- suggestions and proposalsContractor provide:- Altium Designer source files (schematics, PCBs, Project etc.)- DRC free test report- gerber files- BOM + estimated unit cost each component @ MOQ=1000 units based on Mouser, Farnell, Digi-Key, etc.

    [more]
  • $3333 USD 18 days ago

    ===BID ONLY IF YOU HAVE FULLY READ===I am looking for someone with a long history and experience that can help me out on a simple, yet detailed bluetooth project. I will need to be able to see proof of work from concept, to reality. As well, i need strict guidelines in designing and prototyping this pcb. You MUST have knowledge in FCC, Bluetooth certification regulations, layout, ect for this project. I need from you:PCB design(including: Gerber, schematic, detailed bom, PCB layout, and any files associated with it)Quality design work neededwill need you to make sample prototype that can be tested, then mass produced at low costfor now, testing will only need to work with android phone as demo until further coding can be completedmore specific details after biddingPayment terms:pay is not forwarded any milestones until proof. Don"t even ask.Payment set up:ONLY50% upon completion and proof of physical PCB50% upon completion of working prototype + demo working codewill reimburse any cost and fees associated with manufacturing pcb board and partsExpected time frame: 30 days or less. must start immediately and be dedicated to project until completionNote: i have case design, so that should help with PCB sizing and layout dimensions.

    [more]
  • $555 USD 18 days ago

    Hello,have protel pcb data and need reversed it into Eagle to schematicbr Julien

  • $277 AUD 18 days ago

    I need a unit that controls a series of motors, an led flash and a camerait must have a touch screen user interface and have enough flash memory to hold 20 jpeg images and those images must be able to update.It is part of a bigger idea that I am working towards a kickstarter campaign with but I can do a vague virtual breadboard example of what i want and if you also had virtual breadboard you could tweak the design into something that works and finally I would upload that to an actual arduino to be used on the prototype.eventually becoming the base from which the PCB design would come from.

    [more]
  • $1250 USD 23 days ago

    Hello - we are in the development stage of a product. We have an electrical design that we are seeking a second opinion on. By that, we have the design, the schematics, the supporting documentation, BOM (including individual part data sheets), and the associated .gbX and .gtX files ready for review. In this engagement we would be specifically seeking the following: 1.) design review (not a new design); 2.) identification of any issues with respect to submitted design and any suggested work arounds or fixes; 3.) any suggestions for design improvements (including how we might change the design for a two-sided PCB to reduce overall footprint). Do you do this type of work?Applicants must be USA-based and subject to USA patent and copyright restrictions. We require an NDA be executed prior to the start of any work.

    [more]
  • $1250 USD 25 days ago

    Background:\r\n\r\nA completed Orcad Schematic Design was laid out by a DipTrace designer. This designer is no longer available. The reference designators are common, but there is no common netlist to verify the layout. This layout needs to be updated, DRC\\\"d and/or possibly moved to Cadence, using the existing layout as a template.\r\n\r\nThe Work Required:\r\n\r\nIn addition to DRC and updating the layout per the DRC results a few small changes need to be made. The changes to be made are due to RF and power considerations. Small adjustments must be made to trace widths, vias and some of the part locations. These placements may to be nudged closer to each other for better RF and bypass performance. A cursory review shows that all parts are present and generally placed correctly, therefore changes should not be drastic to the present layout to make it right. \r\n\r\nI have several new designs immediately after this one is completed. I prefer to keep all new designs 100% within the Cadence/Orcad design suite. \r\n\r\nI wish to form a long-term relationship with the designer. Therefore, applicant must be able to work in Cadence & to some degree in DipTrace. The applicant must understand and propose how to verify that a DipTrace Layout complies with an Orcad Schematic. Moving the layout and re-doing it in Cadence will be considered as part of the work as well.\r\n\r\nBoard Characteristics:\r\n\r\nThe board has 417 components with a total of 1007 component pins. The layout is not tight. To accommodate the planar transformer the board has 10 layers with all other signals that only need to occupy 2 layers. Outside the planar windings, the remaining layers are generally ground or power pours. The board is unique, but not at all complex. Except for high current connectors, all component pads/pins are SMD. The board is large, about 900 cm2. \r\n\r\nProcess to Complete Job:\r\n\r\nOnce you have the files, I would like the applicant to provide a fixed price bid. Following may be a good way to characterize the process; it is OK if you only wish to do steps 1-3 or to bid 1-3 and 4-5 separately.\r\n\r\n1.Placement or placement correction\r\n2.Final Routing with consideration for RF/impedance & power\r\n3.Full DRC, review and revise as necessary, back annotate all\r\n4.pSpice Model & Simulation\r\n5.Corrections Based on Simulation\r\n\r\nFinal payment would be made for each phase once acceptable files are received. I propose 25% in advance with 1 or 2 25% payment increments at predetermined point(s) and the remainder (50% or 25%) upon completion and acceptance of files. Payment will be made via Freelancer.\r\n\r\nDeliverables:\r\n\r\nDeliverables will include, updated schematic files, conforming to updated layout files. Full logs of DRCs will be shown. Component libraries including schematic symbols, layout symbols (with silkscreen & solder mask) and if 4 & 5 are completed, written analysis of the design will be provided along with pSpice models for each modeled component and circuit including board parasitics . Full Gerber files, corrected BOM file(s) and Assembly drawings will also be deliverables. I will work with the applicant to perform all phases together and expect to have a really good time doing this. The next follow-on board is even more exciting than this one.\r\n\r\nI will send you the files once you demonstrate you have these skills via portfolio & Skype interview and sign our NDA - attached. Thank you for your interest in this project. It will be great to work together on this project and several other projects will follow on shortly.\r\n\r\nWarm Regards,\r\n\r\nScott

    [more]
  • $1111 USD 28 days ago

    We are looking for someone to do the design for a relatively simple PCB that we need to be made. The PCB contains simple digital and analogue components, and we can provide schematics for most of the elements of the design. Most of the work involved is combining the schematics into a single design and doing the layout. There is no software/firmware required. An outline of the PCB are described in the attached .pdf file. We will provide schematics of the (i) op-amp circuit, component (ii) a suggested chip and schematic for the USB hub and (iii) and the motors that we"ll connect. The motors are 15V motors which draw up to 400mA per phase, so there is no requirement for high power. We"ve split the project into the design phase and the fabrication/testing phase, so we can make a stage payment to the successful bidder.

    [more]
  • $222 USD 28 days ago

    I have a schematic that need to translate to a pcb layout using PCB artist. Can someone help me?

  • £1111 GBP 28 days ago

    Hello! We are building a prototype that requires some electronics:- manage electronic valves to control fluid flows over a pipe- heating water on demand (to controlled temperatures)- coinslot machine that enables a timer- and a few minor perks more.Its not really difficult, quite basic electronics.We are looking for someone that builds and ships the built prototype (and it"s documentation of course). We cover the labour and materials. Details can be shared once the candidate proves experience over a telephone / skype interview. Thank you!esteban

    [more]
  • $1000 USD 29 days ago

    I need a new design created that I have been thinking about for a while. I need to create a new PCB for a new idea. We will need to do schematics and PCB. Must know ARM processors and be proficient enough to trust your design to be prototyped and created because it will be. This is new idea and isnt based on any previous FL projects so please message me for details.

    [more]
  • $250 USD 29 days ago

    Planning to make laser based campfire/cigarette lighter.The power of laser we decided is around 5mW -50mWWe are in need of an electronics and electrical engineer who can help us with designing and manufacturing a circuit on a PCB which can emit laser.The PCB has to be very small.We can provide the required components, if necessary.

    [more]
  • ₹36666 INR Mar 25, 2014

    PCB Design with gerber file output

  • RM2222 MYR Mar 25, 2014

    I need to complete PCB layout for 2-layer, silkscreen top side only, Cu weight : 1 Oz, 45 type footprint, total components 600, including test points

  • $1333 USD Mar 24, 2014

    Need electrical integration services for a kiosk, the pcb has already been designed (but would be open for improvements) and the cpu selected. Need an engineer to design the system, create a bill of materials, and integrate the various components- touch display, locks, power supply, etc. Project is at advanced stage, need someone to bring to completion.

    [more]
  • $55 USD/hr Mar 20, 2014

    I am working on a coin operated relay. It is Arduino controlled with a coin validator, relay and 16x2 LCD. The idea is to use the relay connected to washing machines and clothes dryers in the basement of my rentals. It will be much cheaper than buying a coin operated washer, even a used one. The coin validators are plasma cut into an off the shelf safe bought at harbor freight. The other components are in two separate cash boxes connect with 1/2" nipples. One houses the low voltage components, the other houses the relays.I have a working prototype, it just does not look professional and needs to be in a smaller form factor.The right person for this job has PCB design skills and product design skills. I think the circuitry is adequate, but if you have electrical engineering knowledge, all the better. Ideally, once I use the product in my rentals, I would like to market the product. Therefore, I think I would need Underwriters Labitory (UL) certification, but I am not sure. Safety is very important as we will have at least 110v.

    [more]
  • $200 USD Jan 17, 2014

    I would like to hire an electrical engineer with both hardware and software experience to design a prototype device. Due to contractual agreements I require a non-disclosure agreement to be signed before talking more in-depth about the project. Budget listed is not the actual budget. We may negotiate because this will be a project for a company or partner for long-term or short-term business. Include you getting a portion of sales or a payout or equity.Thank you and please consider my request. I will also require 3-d drawing but I have taken care of patents.

    [more]
  • $222 USD Dec 22, 2013

    We need to have the schematic designed for a PCB board. Please only bid if you are a pro.

    Michal Eliasz does not have any open projects.
    Michal Eliasz does not have any work in progress.
[see more]

Portfolio

[see more]

Résumé

Experience

Hardware Design Engineer

Nov 2008 - Present (5 years)

Aldec, inc

Responsibilities:<br />- Schematics and PCB layout designs<br />- Digital/Analog systems designs<br />- High speed systems designs<br />- Production process supervision<br />- Prototypes testing<br />- Technical support<br />- Technical specifications<br />- Manufacturing documentations <br />- Prototypes Testing

Junior Hardware Engineer

Feb 2007 - Oct 2008 (1 year)

Alatek sp. z o.o.

Responsibilities:<br />- Schematics and PCB layout designs<br />- Digital/Analog system designs<br />- High speed system designs<br />- Assistance in prototypes testing<br />- Maintenance works<br />- Technical specifications<br />

IT and Electronic Specialist

Jun 2006 - Jan 2007 (7 months)

Techwind Jan Rutkowski

Responsibilities:<br />- Technical support of IT and electronic equipment<br />- Software solutions creation

Computer and LAN Specialist

Feb 2006 - May 2006 (3 months)

Quadrivium sp. z o.o.

Responsibilities:<br />- Maintenance and modernization works connected with computer networksComputer and LAN Specialist

Education

Master of Science

Politechnika Gdanska

2003-2008

Certifications

EMI/EMC PCB design Certificate

Nowakowski Business Consulting

Electronic Equipment design techniques in compliance with EMC<br />requirements

Publications

No publications

-

-