Online now
Hire Me!
Rate: $20.00 USD/hour
Follow Invite to Project


Design, Prototype, Manufacture, QC

Username: milesf01

  • Has made a deposit.
  • Has verified their email address.
  • Has completed their profile.
  • Has verified their secure phone number.
  • Verified
  • Payment is verified.

Location: Xiamen, China

Member since: February 2008



(159 reviews)

[see more]

No user has recommended this freelancer.

My projects:

  • $1500 USD
    Profile image for Seller Magnusmetalworks


    Feb 13, 2014

    Second time using Milesf01. Plan to use them again. Great to work with and fast turn around. They make sure the project is correct and up to your standards. I have used them to make some plastic and metal parts.

    Project Description:Mold for parts and sample sent
  • $2600 USD
    Profile image for Seller Magnusmetalworks


    Jan 22, 2014

    Will be using them again. Great work.

    Project Description:I have 2D and 3D CAD drawings for the product. I need 10,000+ made. Would like to use a plastic that is harder than ABS. The part does have a threaded hole. Message me and I can send you the CAD drawing or if you have any other questions...
  • $1200 CAD
    Profile image for Seller ipong


    Jan 22, 2014

    Will work with again!

    Project Description:Hello this is me doing this for sourcing check the site.. I need help
  • $35 CAD
    Profile image for Seller ipong


    Dec 17, 2013

    excellent seller 5********

    Project Description:I need you to source beer pong products, red plastic 16 oz cup and white 40mm ping pong balls it is for my website which is similar to they sell essentially the same products as...
  • $60 AUD
    Profile image for Seller fashionistavw


    Oct 24, 2013

    Perfect work

    Project Description:Very basic project I have a scan of a document, one page colour scan in a lores JPG of a Form. I need the dates and the address changed Could be done easily in Photoshop or in Adobe Acrobat Pro
  • $30 AUD
    Profile image for Seller jdharrison5


    Oct 17, 2013

    Fantastic work!

    Project Description:urgent 1 hr project. Very simple updates. Have source PDF for use. Please contact asap for more details.
  • $55 USD
    Profile image for Seller aetomic

    aetomic [ Incomplete Report ]

    Sep 11, 2013

    Miles failed to even start this project. They barely communicated with us and finally told us they could not begin work on the project two days after it was due. Very unprofessional.

    Project Description:[This is a Private Project. You must be logged in to view the Project Description]
  • $35 USD
    Profile image for Seller FDEMART

    FDEMART [ Incomplete Report ]

    Jul 30, 2013

    The project is not completed according to the dispute

    Project Description:I am looking for a cheap manufacturer to produce a retail display. I need a reliable, professional with good workmanship once this product will be used in the Australian. I have got all the drawings just need a manufacturer for a sample and if everything is good I will order many more...
  • $40 USD
    Profile image for Seller HotelParadise


    Apr 26, 2013

    Incredible excellent Photoshop skills... HIGHLY recommended!!

    Project Description:Pls continue reading only if you are highly, highly experienced in Photoshop and truly belong to the very best of the very best. Excellent logical and spatial thinking required! Some of the pictures are pornographic...
  • $70 USD
    Profile image for Seller anniwang2000


    Apr 3, 2013

    Miles did a great job! Fast and everything as promised. Will definitely use him again.

    Project Description:Need to design an animated banner image. It has Simplified Chinese characters in it so prefer you know Chinese An urgent task and need to get done in 24 hours.
    milesf01 has not completed any projects.
  • $200 HKD In Progress

    Task: Convert one CAD file to one technical drawing.Technical drawings to be used for manufacturing, dimensions should be added accordingly.Optional: Provide one small rendered picture on technical drawing.

  • €30 EUR In Progress

    I need a Chinese speaking person, in China, to call a company and ask a couple of questions (5-10 of type: what is it"s name, how big it is, what do they do, when founded), to verify the company.It should be done monday/tuesday during business hours.

  • $150 AUD In Progress

    Thanks Miles. Looking forward to your work.Will email each of the videos along with the description/Title

  • [Sealed] In Progress

    I need verification of several companies in shenzhen china. If your work is reliabe we have over 100 companies to be verified. Products include usb, t.v., cell phones, and broken rice from India. Need verification on several companies that offer these products. If any of the companies are not reliable we will need the freelancer to find a reliable company that offers comparable pricing. Details of what we need for our own verification will be provided once the project is awarded.

  • $166 USD In Progress

    Find A HIGH quality yoga mat manufacturer that has access & method to silver ion. The goal is the have the yoga matt be non bacterial from the Silver Ion materials

  • $10 USD In Progress

    Hi,I"m currently looking for a supplier that could make custom iPhone (4s & 5) cases for my shop. I have many designs ready, but my basic needs are:- Hard plastic case- Printed image on the back- The name of my brand engraved on the side, as part of the plastic mold (something like this: you be able to do the job? How much would it cost? Would you make a prototype first? I live in Madrid, Spain.Thanks for your attentionMayaP.S: I put 10$ as the budget because I will adjust my budget to the price per unit

  • £150 GBP In Progress

    I have a concept for a phone case. I need someone to take the concept and turn it into a finished phone case. The case will be fabric based and therefore you must be an expert sewer and be experienced in phone case design and manufacture.The style of the case will a pull-up style like this: will need to do the following:1) Source materials for the case (a black synthetic leather, a coloured inner fabric and a ribbon fabric for the pull-up system). I will need pictures before purchase. I will pay for these.2) Work out the correct sizing of the case for an iPhone 5 to fit snugly and safely whilst being easy to extract with the pull tag.3) Build a prototype of the case and check it for problems (such as tatty edges etc) and send me photos of the initial prototype.4) Make any refinements and send me photos of the refined version.5) Build 3 more prototypes - 3 in each of the 3 colours.6) Send the 3 final prototypes and the refined initial prototype to me in the UK. Include this cost in your bid, however the parcel will be very small and will not require urgent delivery so will cost very little.A talented manufacturer should be able to complete this project within just a few hours of work. It is very simple and basic, however the highest of quality will be expected. The case my all line up, be symmetrical, the tag must be positioned in the centre, clean edges that do not fray etc.I am only happy to share the exact details of the concept with the chosen bidder. If the project goes smoothly and the prototypes are of outstanding quality, I would be more than happy to continue to manufacture further units with the project winner. Please include details of your experience and work you have done in the past. Let me know of any questions you have!

  • $150 USD In Progress

    Need to find a Chinese shipping company who can take care of door to door delivery from China to US/UK/Japan. PMB for more details. Chinese persons only apply please

  • $300 USD In Progress

    Hello,I"m looking to build a ballpoint pen prototype. However, this is my first attempt at a project like this. I have a design in mind that I"d like to create, but have many questions about the specifics. I"m looking for someone who is familiar with the actual manufacturing process to advise me on how the product should be made. Several parts are thin, and very small. Would it be best to use a similar product for dimensions? Do I need a CAD of these parts? I"d like to use aluminum alloy 7075 for its ability to be anodized and 6063. Where can I source this metal for my project? Cost difference of the two alloys?These are the types of question I need answers to. Please do not bid unless you can help me through this entire process.

  • $35 CAD/hr In Progress

    I"m looking to design some high end casual wear such as button up shirts and jeans. I"m looking for a well experienced person in this trade to assist me in this project, someone with previous skills and extensive samples and work to show me. Looking for an expert in textile printing and clothing manufacturing, I would like some samples made for my clothing brand 5 button up shirts and 5 jeans. My brand is called original citizen, its a clean simple brand, slim fit clothing, I will assist with the patterns and design of the clothing. I also need a website done for my domain, so this is a big project for a talented person, I will also hire them for my company if there interested. please send work, only qualified people can bid for this with pervious experience working for a clothing brand. Thanks again.

  • $8 USD/hr Today

    Looking to manufacture clothing using silk blends.

  • $2500 USD Today

    need a glass & metal office furniture manufacturer to build patented prototypes.

  • $222 AUD Today

    patterns drafted and manufacture of swimwear garments

  • £555 GBP 2 days ago

    i need to find a company who supply custom wholesale snapback caps whos willing to work wit my company on long term

  • $555 USD 2 days ago

    I attached project details as a text file. Please read before bidding.

  • R195 ZAR 2 days ago

    Mass production of a new electrical product

  • $222 AUD 2 days ago

    We require a list of quality manufactures for USB Flash Drives, 16GB, 32GB, 128GB and above. Must be reliable suppliers of goods with a good track record in the build quality of these products.

  • $555 USD 2 days ago

    I am looking for a vacuum cast manufacturer. I need a small run of 20 pcs. of parts cast in ABS and painted with UV resistant coating or paint. I am adding 3D files

  • [Sealed] 2 days ago

    a new toy for productionplastic20000 pieces

  • [Sealed] 2 days ago

    plastics productsimprovements2000-5000 pieces

  • $2500 USD 2 days ago

    I am looking to find a reliable manufacturer for backpacks and outerwear apparel.

  • £254 GBP 2 days ago

    Project Description:\r\n\r\nI am looking to have a physical fabric sample produced, using an existing\r\npattern design the design is a vector file in .dwg format (AutoCAD) which will be\r\nprovided to the appointed freelancer at the start of the project. \r\n\r\nThe purpose is to physically assess how the attached design would appear when layering \r\nstitched thread on top of a flock or flex printed fabric.\r\n\r\nRequirements / Deliverables:\r\n\r\n- All materials and relevant trades to be sourced locally by appointed freelancer.\r\n- Fabric to be black in colour and at least 80% cotton in composition (similar to a T-shirt)\r\n- The design is made up of 2 patterns, each on a separate layer:\r\n - the background pattern is to be flock or flex-printed (1 colour - TBD at later date)\r\n - the foreground pattern is to be digitally-stitched in suitable thread, on top of the printed background pattern (1 colour - TBD at later date)\r\n- The finished sample must measure no less than 20cm at its shortest side and delivered to London, England.\r\n- Simple, \"work-in-progress\" photos to be provided after background pattern has been printed and again after foreground pattern has been printed.\r\n- Completion and delivery of finished sample by June 14th.\r\n- The design and file supplied must not be copied or distributed to others without consent.\r\n\r\nFreelancers:\r\n\r\nBidding freelancers must have prior experience in working with graphics and thread on fabric / textiles, \r\nwith an understanding of manufacturing processes. The project requires someone who is able to offer advice\r\nand provide options, to help realise the design successfully.\r\n\r\nInterested parties should attach examples of relevant work, along with a very brief explanation as to why\r\nyou believe you are the right person for the job.\r\n\r\nI look forward to hearing from you.

  • $222 USD 2 days ago

    Hello freelancers! I am needing someone to produce me prototypes shirts, that I have attached below. I look forward to hearing and working with you! I may also be looking for a long-term manufacturer that can continually produce my clothing, but that"s another story. I am simply looking for prototypes first.Thanks, Benigno.*NOTE:Black areas = leather. Preferred material: Polyester Cotton (51% Polyester, 49% Cotton)Feel free to choose the shirt color of your choice as I only need one of each style.

  • $555 USD 4 days ago

    small production run for a new necktie line

  • $55 USD 4 days ago

    I need you to source manufacturer from China or other country. We need to find telescopic tube manufacturer. -Stainless steel mini tube.-Outer Diameter 3,5mm or lessThis is an example manufacturer: hope you can find 15 top reliable manufacturers, who can do the same as that example manufacturer.Thanks!

  • £222 GBP 4 days ago

    Need to make some gold metal jewellery accessories for graduate fashion show. Accessories needs to be finished by the 15th of may. Best regards

  • $5555 USD 4 days ago

    we need school uniform for 10 school all level and size from kg1 to grad 12total amount pics 70 000

  • £333 GBP 4 days ago

    I am looking for a leather producer in the UK (South East) who can take my simple design and make a prototype.

  • $43 USD 6 days ago

    Hi, I need to send one PC"s of the below product at USA from china. i dont get any good trustworthy to pay for this , i want to get someone from here can buy this from there and ship to USA.i wil pay some extra money who do this for me.Thanks

  • [Sealed] 6 days ago

    I need someone to fabricate a wine cradle from steel parts. The bid should also include shipping to my office in FL.The parts list should answer any questions regarding supplies needed. All of the steel is listed with a yellow zinc chromate surface finish; however, another finish may be considered.The design is completed and available in 2D CAD and 3D solid works format.

    milesf01 does not have any open projects.
    milesf01 does not have any work in progress.
[see more]


[see more]




Jul 2001 - Jul 2009 (8 years)

Nike OEM Sports Ball factory