Last seen: Jul 10, 2014 2:22 PM EDT
Hire Me!
Rate: $15.00 USD/hour
Follow Invite to Project

Tanzeela Kousar

PCB Layout, MATLAB and Antenna Design Specialist

Username: tkousar

  • Has made a deposit.
  • Has verified their email address.
  • Has completed their profile.
  • Has not verified their secure phone number.
  • Verified
  • Payment is verified.

Location: Lahore, China

Member since: December 2010



(32 reviews)

[see more]

No user has recommended this freelancer.

My projects:

  • $1153.00 USD
    Profile image for Seller motorcycleusa


    May 10, 2014

    Very professional and he completed the project well ahead of time and he didn't complain about changes.

    Project Description:Need to re-desgin a PCBA. We currently have a 1 sided board that we want to make 2 sided and to make smaller. This is a RF board. Double sided multilayer SMT PCB design based on Texas Instruments reference design...
  • ₹14000.00 INR
    Profile image for Seller bineet18


    Apr 23, 2014

    Can be trusted. Will work with him again.

    Project Description:I need someone to develop a MATLAB code for Real Time outdoor tracking using Independent Component Analysis(ICA) and Particle Swarm Optimisation(PSO). For example, if we take a live feed from UAV, of a road with the traffic, then the moving object should be extracted by the ICA...
  • RM1000.00 MYR
    Profile image for Seller khtan223


    Mar 3, 2014

    Some one you can trust.

    Project Description:PCB Layout for the CellLoc project. Dimension and placement of component will be given. 2 Layer board design.
  • $250.00 USD
    Profile image for Seller isaacbermudez


    Feb 28, 2014

    Very professional and had all the proper expertise for completing the project.

    Project Description:N/A
  • RM800.00 MYR
    Profile image for Seller khtan223


    Feb 19, 2014

    Will get him for the next project again, although this layout is a bit slow due to his business trip. Looking forward for next cooperation again.

    Project Description:I am having a schematic and want to find knowledgeable Cadsoft Eagle PCB Layout Designer to help on layout of the PCB design. It will be a 2 Layer board.
  • $50.00 USD
    Profile image for Seller drkilra


    Feb 13, 2014

    Another great job on some software enhancements. He truly stands by his work product. I highly recommend this developer.

    Project Description:this is for a project you have completed. i wanted to pay you for your help. This project should have been submitted a month ago but the Target compromise caused our bank to issue us new cards and interrupted business operations...
  • $30.00 USD
    Profile image for Seller user10vw


    Oct 13, 2013

    He is the best,for sure i'll work with him again.thanks

    Project Description:Hello I have an assignment about writing summary in information security . Best regards,,,
  • $25.00 USD
    Profile image for Seller user10vw


    Sep 24, 2013

    Excellent work and excellent person to work with

    Project Description:Hello I have an assignment about writing summary in information security,please if you are (((((( EXPERT ))) in this area contact me. Also,he/she has to be very good english writer and grammar...
  • $30.00 USD
    Profile image for Seller user10vw


    Sep 19, 2013

    He is the best,on time.I will work again with him :)

    Project Description:Hello I have an assignment about writing summary in information security,please if you are (((((( EXPERT ))) in this area contact me. Also,he/she has to be very good english writer and grammar...
  • €150.00 EUR
    Profile image for Seller jeroenwitteveen

    jeroenwitteveen [ Incomplete Report ]

    Jul 18, 2013

    Canceled on request of freelancer. Freelancer reported issue in a professional way and without delaying the project and returned the milestonepayment.

    Project Description:Finish schematics and layout of a PIC based controller - Schematics: some components need to be added / replaced - Complete layout - Tool: eagle 6.x For details see attached document Do not hesitate to contact me if you have further questions...
    Tanzeela Kousar has not completed any projects.
  • $500 SGD In Progress

    I would like to create a development board that support this plugin modules, they actually sell explorer 16 but some of them I do not need. Here is the plugin modules. are my desired specifications:1.) Female headers for my development board to be plugged in.2.) Reset button, for programming purpose.3.) Incoming power 24vac. On the 24vac incoming power connector, I want to have a filter protection circuit to filter any noise from incoming source.4.) Triac controlled by opto isolator that can output 24vac with 2 wire connector each. If possible I want to create jumper settings on a board to convert the Digital output to digital input. Each digital output pins if have fuse should be better, with led.5.) Digital input to accepts digital signal, if possible I want to have some protection from incoming voltage to protect the MCU. Also with led.6.) Analog input ports that can accept 10k, 4-20mA, 0-10vdc, 0-5vdc trough analog signal. If possible must have jumper settings onboard to select what type of analog input.7.) Onboard Real time clock, something like this one, Interfacing connectivity, on board usb ports, Ethernet and RS-485. 8 pin socket for max485 chip for me to change easily. and iscp header for downloading programs.9.) External flash memory?10.) I"m looking for something like, 5 Digital Output pins convertible to digital input via jumper settings. 2 Analog outputs that can output 0-10vdc, 1 Pulse input?, 8 Analog input that can accept 10k, 4-20mA, 0-10vdc, 0-5vdc and digital feedback configured via jumper settings. Program no need as i need this development board only to play around on programming. If you may need the actual plugin modules for the sizing you can purchased and include on the pricing.I want the board itself assembled together with the components.Schematic diagram

  • $280 USD In Progress

    The details are attached.The project is about antenna design using matlab.

  • $35 USD/hr 3 days ago

    Looking for someone to create OrCad schematics files and PCB layout design.the final product is:1. Schematics files2. design files ready for production.The circuit and additional information will be provided as needed for the appropriate person.mainly, the circuit is a signal condition circuit (filters, gain (op-amps, ins-amps)). It contains approximately 120 parts (parts of the circuit are duplicated).

  • £400 GBP 3 days ago

    I need a board for the Raspberry PI, id like to use the I2C protocol. The board must have;16 digital inputs and 16 digital outputs - perhaps using 2x MCP23017 chipsa real time clock with battery - perhaps using the DS1307 chipof the 16 digital outputs, 12 of these should control surface mount LEDs - the remaining 4 should control relays - like the omron G5LA-1the relay common and output pins should be connected to some kind of screw connectorthe 16 digital inputs should be connected to screw connectors alsoshort circuit protection etc would be nice if possibleconnection of 24VDC input signals would be nice if simple to implement The PiFace Digital IO board is similar to what i need so maybe use it as a starting pointId like to be able to source all parts from UK, either from RS, Farnell or Rapid. Parts used don"t need to be highest end, just decent quality

  • £250 GBP 3 days ago

    We require a full design service for a small prototype Printed Circuit Board.The design must meet the requirements of the PCB manufacturer, Seeedstudio. Payment in full will not be made until Seeedstudio have accepted and approved all designs.The design required is for a small PCB that will include a Bluegiga BLE121LR module, voltage regulator, programming pins and the recommended components shown in the BLE121LR Datasheet. Provision for an optional battery connector will be required. A final circuit will be provided.It is important that the design complies with the RF requirements set out in the datasheet.Quotations should include price for each item required by the PCB manufacturer as well as an estimated completion time for the work.Previous examples of work to be provided

  • $250 USD 6 days ago

    I have a schematic design and a BOM ready and I need someone to draw the schematic design for me on Eagle, and also to create the layout for it according to my requirements.

  • $15 USD/hr 7 days ago

    Hello,I"m an embedded systems developer at I develop the meteorological miniature radiosonde and other products. But I don"t have the time to do all work myself.As a first step I need a FPC Eagle part with footprint from PDF specs for two connectors and a mating FPC part that fits both:** need the 8 position versions.Instruction from the FPC manufacturer how to include the stiffener for strengthening the FPC under the connector: "You can place the stiffener in the copper layer, please mark the stiffener area clearly."I also need updated design for this FPC. It sticks out from the radiosonde and holds the temperature&humidity sensor. I attach the current design. The FPC needs the following changes:* mate with the FPC connector instead of current through-hole connector* remove the ground plane, to lower the I2C capacitance* arrange the traces to avoid incoming and radiated radio interference* If viable, single-sided tracesIf you accept and the cooperation works well, there are a number of other projects where I also need help. I will pay by the hour.Best regardsAnders Petersson

  • $1500 USD 13 days ago

    Our team needs to collect data for machine learning. We need a battery powered portable device capable of logging data from sensors to a microSD memory card, controlling two small motors, and enumerating as a USB thumb drive displaying log files when connected to PC.We need schematic design, BoM selection, board layout, and software development. The device will include gyroscope and accelerometer data, as well as audio recording. The device has two outputs, controlling low wattage (3-5W) motors. If your team can provide a complete schematic in EAGLE, we can do the board layout.A detailed statement of work (Word document) is available for interested candidates. We are looking to start immediately, but are budget-conscious (our company is un-funded, so as much as we want to pay you a lot, we can"t).

  • €750 EUR 13 days ago

    We need the implementation of a Pulse Code Modulation (PCM) interface based on the SGPIO peripheral available on the LPC43XX devices from NXP.The PCM - bus should support DMA- transfer due to performance reasons.The details are described in the attached file.There are a many examples around the SGPIO peripheral (also attached)

  • $500 USD 13 days ago

    hello there i need a person who can finish my PCB schematics add more and put them into a right order.

  • $2500 USD 13 days ago

    Hi there,We are a small start up looking to contract out an EE to do some circuit design, component selection and breadboard prototyping for a novel solar charger for phones and other small electronics. It"ll be fun, we promise. I"ve attached a brief Specification sheet and Scope of work. The start date would be ASAP. Please shoot me a message with your resume. Preference will be given to those with relevant experience and also based in the U.S.

  • $1000 USD 15 days ago

    We already have the schematic design, the bidder must modify the schematic and PCB according to the requirement.main chip: Altera Cyclone IV CGX seriesfunctions: ADC/DAC, PCIe 1.1 x4, DDR2, clock, filter, power etcIf you have the successful experience and are interested in the project, please feel free to contact me anytime.We prefer lower cost.

  • $6000 USD 16 days ago

    Seeking an embedded systems engineer (or small team) to create a Schematic, PCB layout, and Firmware for a Bluetooth LE enabled motor controller inside of 12 weeks.Each controller will command a stepper motor in a closed loop fashion with encoder feedback. Experience with Bluetooth LE, closed loop control systems, and good knowledge of DC power is desired. Each controller is powered by 9 - 24vdc and will need an integrated boost regulator to provide 48vdc to the stepper driver. The PCB is of a custom shape with specific limitations on component height and placement in certain areas of the board. The specific IC components of the controller have largely already been chosen. A Solidworks model of the housing and PCB shape will be provided to assist in the design.Multiple controllers will work together in small groups and will receive commands in one of two ways: 1) A smartphone/tablet maintains an active BTLE connection with multiple controllers and sends specific commands to each one.2) A single controller receives commands via a USB port and relays the commands to other controllers on the network.We are looking to hire from within California but will consider applicants from the western U.S.A. We"re sorry, but no applicants from other countries will be considered for this project.Please send resumes with references and applicable experience. We will supply full details of the product to interested applicants so you can quote accurately. Thank you.

  • $3000 USD 16 days ago

    I am looking for the design and prototyping of a simple Micro GPS Tracking Device. I would like it to be as small as possible, have low power consumption, transmit location via micro SIM on G3 network every 5 mins, determine location via cell network as back up and use a non-rechargeable battery. I want this device to be as simple as possible with minimal additional features to conserve battery life.In addition to the design, I would like 3 prototypes made along with a web site that receives and stores the transmitted location of the three units. The device must be capable of working in Canada and meet any Canadian SIM requirements.With your bid, please provide an estimate of the dimensions of the device and an estimate of battery life. Please also propose milestone payment structure including shipping of prototypes via FedEx to Canada.

  • $500 USD 16 days ago

    Hi, I need a basic software that can recogize how many faces are on a life camera feed. It will then serve another basic feature like send a print command but that is something I can discuss with you once we have the facial detection part of it out of the way.I"m available at all times to discuss, please feel free to get in touch whenever.

  • $1500 AUD 27 days ago

    Hi I need a product design and development for a Light weight digital photo frame with wireless capability and a few other features will discuss with bidders. I need it to be able to feed into a main network through a website or cloud network. In other words I can have 5-10 different photo frames in different houses and can control what photos will be visible in each of those houses from a central computer/website. It will also embed to robotic features that will be discussed with appropriate bidder. It is an exciting and challenging project so enthusiastic engineers bid up. Although I have selected a small budget the budget is adjustable according to the requirements of the project, I need offers from experienced and/or enthusiastic engineers and designers.

  • $200 USD Jun 4, 2014

    At this point I have working prototype boards and completed working units. The problem I have is that at present the way I have made the boards is not compatible with standard machine assembly. Right now I hand assemble the boards using prototype boards hand cut to size and I have the resistors vertically inserted to save space. The boards are between 1 and 2 inches square approximately, depending on the circuit. The parts count varies from about 25 to 60 components depending on the circuit. There is no problem with using surface mount components. The prototypes are all leaded and hand inserted at this point however. I have perused programs to aid in doing this myself but lack the technical know how needed to make it happen. From what I have seen from various searches, I need to present a manufacturer of stuffed printed circuit boards a Gerber file in order to enable them to produce a product that I can then use to complete the assembly myself..

  • $1200 USD Jun 2, 2014

    [This is a Private Project. You must be logged in to view the Project Description]

  • $200 SGD Apr 5, 2014

    need someone who has experience with maps. Its a geographical information system. Needed to enhance user experience and map features. I have a working source already.need someone to take over and improve the mapping system. P.S : It is not google map. I am using a custom map from this . . Only bid if you are confident.

  • $250 USD Mar 23, 2014

    The description of the project can bef found at - program should implement any algorithm. It may not be the best , but the PROGRAM CODE SHOULD SHOW THAT I ATLEAST WORKED ON THE ALGORITHM and tried to reduce the vertices/or whatever in the algorithm.the initial algorithm design and cost analysisof the CUP project should be given. (ANY LANGUAGE IS OKAY, OS-WINDOWS)INPUT: A set of linear geometries that bound polygonal regions and a set of constraining points.OBJECTIVE: Simplify the linear geometries such that the relationship between the constraining points and linear geometries before and after the simplification does not change. In addition, the topological relationships between the original set of input linear geometries does not change after the simplification.Description: Geometry generalization is a well known area and there are two main algorithms ((i) Peucker Algorithm and (ii) Visvalingam_Whyatt Algorithm). These techniques can be applied to linear and polygonal geometries to produce generalized geometries. The same techniques can also be applied to produce generalized maps. In map generalization one of the difficult problems is to maintain the topological consistency between adjacent polygonal regions during the simplification process. This is explained with the help of the following figures..DETAILS CAN BE FOUND IN THE LINKPRICE-NEGOTIABLE

  • $750 USD Mar 20, 2014

    My project is simulation based using MATLAB. The project involves recognition of EMG signals, by applying feature extractions to the signals and then use Artificial Neural Network. Also GUI has to be designed.

  • $750 USD Mar 4, 2014

    teaches spiral antenna and it gains,BW, radiation pattern and teaches of feeding the spiral and discussion of baluns.we select the frequency desiagn for the spiral between 10mhz up to 30mhz.determine the phase and the lenght of the antenna.The mathematical equation used in the desiagn of spiral antenna

    Tanzeela Kousar does not have any open projects.
    Tanzeela Kousar does not have any work in progress.
[see more]


[see more]



Electrical Engineer

May 2012 - Jun 2012 (1 month)

A-INfo Inc.


B.E (Electrical)

National University of Science and Technology



B.E Electrical