3D Model of a Rock Climbing Wall

  • Status: Closed
  • Prize: $80
  • Entries Received: 12
  • Winner: rmissin

Contest Brief

I need a 3D Model of a Rock Climbing Wall, lets let the design drive the process, then I will work with an architect.

This will be getting build, or give me some initial designs outside of what I already have in mind. So think realistic when building the design.

**note the framing of the wall is not a concern, just the front shape and panel design.

Requirements:
-Fit within a building that is 100ft long, 60ft wide, and 25ft tall
-Wall should be no lower than 8ft at any point.
-No Curves, all flat panels to create angles.
-3,000 to 5,000 total wall sqft (on the front). The less the better, but needs to fill up the space and look good.
-Needs to be designed so it can fit up against the two walls (100ft and the 60ft wall).
-Does not have to take up all the wall space.
-Do not add the climbing holds in the mock up.
-Will need in a 3d file compatible with Google sketchup once winner is chosen.
-Any wall curves need to be made with flat panels as seen in the picture links below. One or two curves may be ok to add.

-One Highlight on the wall would be fun, something that stands out, like this would be cool to see. Help me think outside of the box: [url removed, login to view]

(added a few links of example pictures of different styles of climbing walls)
-[url removed, login to view]
-[url removed, login to view]
-[url removed, login to view]
-[url removed, login to view]
-[url removed, login to view]
-[url removed, login to view]
-[url removed, login to view]
-[url removed, login to view]
-[url removed, login to view]

Recommended Skills

Top entries from this contest

View More Entries

Public Clarification Board

  • ashleyclarke84
    ashleyclarke84
    • 4 years ago

    Hi, I just stumbled across this project. I'm a professional climbing wall designer and have designed dozens of climbing walls in all manor of styles and for all levels of ability. I've recently finished this one https://www.facebook.com/highsportsbrighton/photos_stream which is under construction now as well as pretty much everything on here http://www.climbingwall.co.uk/blog/walls/ If you're interested in a workable design let me know. I charge in dollars about $1.50 per m2 of climbing surface but for the sake of getting a project under my belt on here I'll do it for $1 per m2, so likely around $350- $400 all in. It may seem expensive but you'll get a real design for a piratical functional wall that'll meet all the safety standards in terms of fall zones and distance between lines as well as wall that is going to offer the right mix of challenges for its intended use.

    • 4 years ago
  • rmissin
    rmissin
    • 4 years ago

    Hi ,samuel, #2 is a render I did before I noticed you had posted a skp file of the building, anyway hopefully you get the gist of the basic concept and colours. I can give you more angles if you like the design.

    • 4 years ago
    1. rmissin
      rmissin
      • 4 years ago

      Scratch all that, I had the dimensions correct :)

      • 4 years ago
    2. samuelreading
      Contest Holder
      • 4 years ago

      Thank you rmissin, your building size was right on point! I added the .skp file to prove a point to reincarnated3d comment (since I did not think the requirements were too hard).

      • 4 years ago
  • samuelreading
    Contest Holder
    • 4 years ago

    I added a model of the building dimensions to help give an idea of what the all needs to fit into.

    • 4 years ago
  • lauraburlea
    lauraburlea
    • 4 years ago

    Hello! Could you please "seal" the contest, to avoid any copycats? Regards, Laura

    • 4 years ago
    1. samuelreading
      Contest Holder
      • 4 years ago

      Hi Laura, I don't mind sealing it. Freelancer charges 30$ to seal it though, so I would rather give it to the winner. If I see any copycats I will most surely go with the person who submitted first.

      • 4 years ago
  • reincarnated3d
    reincarnated3d
    • 4 years ago

    Have you posted this project as a contest by mistake? For 80$ and according you requirements, i think you will be wasting your time waiting for any entries.

    • 4 years ago
    1. samuelreading
      Contest Holder
      • 4 years ago

      Thank you for reply, this was my first time posting a contest. Just went with the price that feelancer put

      • 4 years ago
    2. samuelreading
      Contest Holder
      • 4 years ago

      Also I wanted to point out that in one evening (3rd time using google sketchup) I was able to get a pretty good idea of some wall designs and then build them out in 3d within 3hours. I'm just a beginner, and am looking to get designs with those constraints (otherwise the design will be useless to me). A 30 minute design, could be a quick and easy 70 bucks in my eyes. Layout a building size. Layout your max height and low height grid-lines. That is about 2minute process. Then start designing some ideas with only straight lines and flat panels. Pretty simple from what I thought. Then optionally throw some color on the walls and bam contest design added.

      • 4 years ago
  • Estudiomaparq
    Estudiomaparq
    • 4 years ago

    Hello I would like to work on your project. I am architect and I have a lot of knowledge. I have much experience in renderings and 3d architectural modeling. Visit my portfolio. I await your comments. Greetings Architect Patricia Andrades

    • 4 years ago
    1. samuelreading
      Contest Holder
      • 4 years ago

      Hi Patrica, I will visit your profile. Thank you for replying.

      • 4 years ago

Show more comments

How to get started with contests

  • Post your contest

    Post Your Contest Quick and easy

  • Get tons of entries

    Get Tons of Entries From around the world

  • Award the best entry

    Award the best entry Download the files - Easy!

Post a Contest Now or Join us Today!