Project of 3 grave lights - Projekt trzech zniczy

  • Status: Closed
  • Prize: $1329
  • Entries Received: 346
  • Winner: cesarchacondi

Contest Brief

Project of 3 grave lights – glass containers (small version) including plastic part of the bottom and the top.

Good morning,

According to the subject, we are looking for the Designers, who will be able to prepare for us the project of three complete grave lights consists of glass container and plastic bottom and the top. We are looking for the modern projects according to the current trends. In attachements you will find the models of the top and the bottom parts of the grave light – these are the standards to which the project and the plastic elements should be adjusted. Before the proces of 3D modeling you can send us your idea as a drawing/sketch just to show the plan. Below are the additional info regarding the grave light:

Main guidelines:
- the height of the glass part – 180 mm
- the height of the grave Light including the plastic parts of bottom and the top – max 260 mm
- max size – view from the top – 80 mm

If you need more info, please contact.

=============================================================================================

PROJEKT TRZECH ZNICZY - POJEMNIKÓW SZKLANYCH (MAŁYCH) WRAZ Z PLASTIKOWĄ PODSTAWKĄ I DEKLEM.

Dzień dobry!
Zgodnie z tytułem konkursu, poszukujemy osoby, która wykona dla nas projekt trzech kompletnych zniczy składających się z pojemnika szklanego oraz plastikowej podstawki i dekla. Szukamy projektów nowoczesnych wpisujących się w obecne trendy.
Dołączamy również modele góry oraz spodu pojemnika, są to standardy, do których należy dostosować projekt i plastikowe elementy.
Przed rozpoczęciem modelowania 3D można przedstawić projekt w postaci szkicu. Poniżej znajdują się dodatkowe informacje dotyczące pojemnika.

Główne cechy:
- Wysokość pojemnika szklanego 180mm
- Wysokość całego znicza z podstawką i deklem max 260mm
- Wymiar maksymalny patrząc od góry nie może przekroczyć 80mm

W razie jakichkolwiek pytań pozostaję do dyspozycji.
Pozdrawiam i życzę powodzenia.

Recommended Skills

Public Clarification Board

  • QUADROSTUDIO
    QUADROSTUDIO
    • 1 month ago

    I'm a fool because I followed the requirements until the winning project didn't comply. I'm not going to comment on whether the winning design is modern, because that's not entirely objective. But there is no way that the winning project has an overall size of 80 mm (view from the top, written in the condition) and minimum size of the glass part of 76 mm (according to the drawing provided by the contest holder). The protruding glass part is also absolutely impossible to fit in the 80mm size. According to the terms of the competition, it is not possible to have such a wide bottom part. I have lost many contests and have not allowed myself to comment except when a design that does not meet the criteria is chosen. This leads to the situation where many of us have wasted our time. Because we could also make a wide bottom and a convex glass part if we knew that the conditions of the contest could be totally violated. My criticism is not to the winner, but to the contest holder.

    • 1 month ago
    1. Ilmarcolino
      Ilmarcolino
      • 1 month ago

      agree

      • 1 month ago
  • nazmisevli
    nazmisevli
    • 1 month ago

    Congratulations Caesar

    • 1 month ago
  • Amr3d
    Amr3d
    • 1 month ago

    Hello contest holder ,contact me please, thank you.

    • 1 month ago
  • SergenKaan
    SergenKaan
    • 1 month ago

    A very necessary and must-follow explanation that wastes almost everyone's time;
    **Main guidelines:
    - the height of the glass part – 180 mm
    - the height of the grave Light including the plastic parts of bottom and the top – max 260 mm
    - max size – view from the top – 80 mm **

    None of the liked entries are eligible, the winning entry is completely irrelevant...
    (I have no dissent towards the owner of the winning post, I'm just angry at the contest holder.)
    Congratulations Caesar...

    • 1 month ago
  • Fanox
    Fanox
    • 2 months ago

    there is some confusion.... First of all you asked for a modern design and classic designs get more stars. Second point, say you use your STEPS for plastic parts and those who don't use them get more stars. Third point, tell me to respect the 80mm diameter and 180mm height measurements for the glass and those who don't respect them get more stars.... It sounds like a waste of time or some smart move to get ideas for free by winning, look at the case , a "user from Poland".... I just want to see when he wins the competition what he has submitted and I'll be ready to apologize for my doubts on this last point!

    • 2 months ago
    1. SergenKaan
      SergenKaan
      • 1 month ago

      Agreed @Stefano P.
      I had almost the same thing with another contest and the result was as I expected.
      For the same reasons, after the first design I submitted, I decided not to work for this contest.
      I think that the award is so high that it is purely to attract attention.
      Waiting to see the result...

      • 1 month ago
    2. marioorlando95
      marioorlando95
      • 1 month ago

      Totally agree. I thought the same thing.

      • 1 month ago
  • bibekanandaseth1
    bibekanandaseth1
    • 1 month ago

    Hello sir please visit this link. https://drive.google.com/drive/folders/10ttFFvKXCiBaAn3jvoxONHEVRJlQnTwl?usp=share_link

    • 1 month ago
  • ikramhasan640
    ikramhasan640
    • 1 month ago

    #extended please

    • 1 month ago
  • Vipuln932
    Vipuln932
    • 1 month ago

    now i am deleting my entrys, hope any deserving candidate win this compititions, good luck.......

    • 1 month ago
  • Adreyat08
    Adreyat08
    • 1 month ago

    Check #388 Crystal Glass grave light model. Thank you.

    • 1 month ago
  • ikramhasan640
    ikramhasan640
    • 2 months ago

    I am working on your project, please extend the time by 1-2 days so that I can finish the work well.

    • 2 months ago
  • mems2020
    mems2020
    • 2 months ago

    Is it possible to open this contest for one day only or you can't?
    I hope you will do, so in order to share my work with you.
    thank you.

    • 2 months ago
  • Vipuln932
    Vipuln932
    • 2 months ago

    I am waiting for winner, who's entry is following products measurements..

    • 2 months ago
  • ikramhasan640
    ikramhasan640
    • 2 months ago

    I am working on your project, please extend the time by 1-2 days so that I can finish the work well.

    • 2 months ago
  • mahmouddashraf94
    mahmouddashraf94
    • 2 months ago

    kindlly find my last designs for this comp. i made NEW DESIGN ( OP 4) ENTRY #424 and my OLDEST DESIGN I THINK U DIDNT SEE IT ENTRY #411 #410 #409 AND ENTRY #183
    and MY FIRST SUBMIT ENTRY #62
    PLEASE FIND MY DESIGNS AND GIVE ME FEED BACK TO IMPROVE MY KNOWLAGE IF I DIDNT WIN CAUSE I DIDINT HAVE ANY COMMENT FROM U BEFOR AND I ASKED ALOT THANK YOU

    • 2 months ago
  • ikramhasan640
    ikramhasan640
    • 2 months ago

    #extended please

    • 2 months ago
  • Ilmarcolino
    Ilmarcolino
    • 2 months ago

    Yeah, my comment was not finished. sory. I only see good ratings for proposals that do not even use the step file or are not even modern. That is something strange. My suggestion: you will get better results from a contest if you give some kind of feedback. I understand this is a contest, but you are not being consistent in what you ask, and what you rate, makes me feel you are getting many ideas for free. Thats why my designs are withdrawn. Thank you for the oportunity!

    • 2 months ago
    1. ZniczPlast
      Contest Holder
      • 2 months ago

      I understand, maybe my description is not very clear, but I do not delete ideas even if they are not complete, because I can always ask for changes individually from each freelancer. Thank you for your comments, I will try to adapt to them in the future to achieve better results.

      • 2 months ago
    2. IvanTsurkov
      IvanTsurkov
      • 2 months ago

      I also withdrew all my bids due to the fact that most of the bids that were rated were either square or did not use the bid owner's file as "basic parts" and received the lowest score for their bids. It's kind of not right!! This is if I posted a competition and indicated that I need to come up with a new design for a three-wheeled car, but would I put high scores on four-wheeled cars?!?!?

      • 2 months ago
  • IhorKozodoy
    IhorKozodoy
    • 2 months ago

    Please check #390 #391 #392

    • 2 months ago
  • Amr3d
    Amr3d
    • 2 months ago

    Hello please give a feedback for #182 , or if you would contact me .thank you in advance.

    • 2 months ago
  • Rileyphiles
    Rileyphiles
    • 2 months ago

    I too asked for feedback on entry 225 but didn't get any. is this something that will be provided?

    • 2 months ago
  • kalnienk
    kalnienk
    • 2 months ago

    Would appreciate some feedback on #358

    • 2 months ago
  • Vipuln932
    Vipuln932
    • 2 months ago

    Entry #5 is better than #330 but that time you want measurements , but now I don't know what you are doing? It is impossible to know what you really want?

    • 2 months ago
  • Adreyat08
    Adreyat08
    • 2 months ago

    Hello dear CH. check update entries #347 I thought about some new models, what do you want to know? Looking forward to your feedback. Thank you.

    • 2 months ago
  • cesarchacondi
    cesarchacondi
    • 2 months ago

    Dear Contest holder:

    I see you liked some of my proposals ( #154 #160 #161 ) , and I would like to have some feedback, to see how can I improve them or maybe submit new ones based on your comments.

    Looking forward to hear from you.
    Thank you

    • 2 months ago
    1. ZniczPlast
      Contest Holder
      • 2 months ago

      I send you information on msg.

      • 2 months ago
  • nazmisevli
    nazmisevli
    • 2 months ago

    Is it the cover or the design that is missing? #338 #337 #341 #342

    • 2 months ago
    1. nazmisevli
      nazmisevli
      • 2 months ago

      I can't move forward as there is no verbal feedback.

      • 2 months ago
    2. ZniczPlast
      Contest Holder
      • 2 months ago

      please, check msg.

      • 2 months ago
  • Fanox
    Fanox
    • 2 months ago

    I open the bets.... I bet on @Techmipl as the winner!

    • 2 months ago
    1. Vipuln932
      Vipuln932
      • 2 months ago

      i also

      • 2 months ago
    2. IvanTsurkov
      IvanTsurkov
      • 2 months ago

      Looking forward to this masterpiece)

      • 2 months ago
  • lawrence2design2
    lawrence2design2
    • 2 months ago

    Hello, Could you review #290 , Regards.

    • 2 months ago
  • milyaas77
    milyaas77
    • 2 months ago

    Please check entry #322

    • 2 months ago
  • pamakdipak6
    pamakdipak6
    • 2 months ago

    Please check #319

    • 2 months ago
  • IvanTsurkov
    IvanTsurkov
    • 2 months ago

    Check out my new designs #317 #315 #312 #297

    • 2 months ago
  • Thestylehauz
    Thestylehauz
    • 2 months ago

    working on it

    • 2 months ago
  • sriharivaila2000
    sriharivaila2000
    • 2 months ago

    Hi client please explain about how the design is going to be manufactured on glass. It will be helpful to make for you to get the accurate work you want.

    • 2 months ago
  • kathire
    kathire
    • 2 months ago

    please check #273

    • 2 months ago
  • riolaa15
    riolaa15
    • 2 months ago

    Please check #262 , thank you

    • 2 months ago
  • Ilmarcolino
    Ilmarcolino
    • 2 months ago

    strange contest. Modern designs do not recieve any feedback

    • 2 months ago
    1. sriharivaila2000
      sriharivaila2000
      • 2 months ago

      How can we know that whether the design is manufacturable or not.

      • 2 months ago
    2. Vipuln932
      Vipuln932
      • 2 months ago

      i think you are right, i just waiting for who become winner, i try my all efforts but gets only two or three stars,

      • 2 months ago
  • Fanox
    Fanox
    • 2 months ago

    Moreover, it is not clear whether you want to use a candle or an electric/led light bulb.... if the first solution is the most suitable, your STEP files are not good, much less the many 3-star choices with the candle

    • 2 months ago
    1. ZniczPlast
      Contest Holder
      • 2 months ago

      We put both traditional and electric candles in the models. I expect complete works. Many models are nice, but impossible to make by the glassworks and our production.

      • 2 months ago
  • riolaa15
    riolaa15
    • 2 months ago

    Please check #208 , thank you

    • 2 months ago
  • mahmouddashraf94
    mahmouddashraf94
    • 2 months ago

    I ATTACHED 8 PHOTOS EVERY SINGLE MODEL HAVE TWO SHOOTS TO SHOW ALL DETAILS OF THE MODEL AND I PUT COLLECT PHOTO FOR ALL MODELS AND FINALLY THE SHOOT FROM 3D MAX TO DESCRIPE THE BODY OF EVERY MODEL PLEASE CHECK ALL PICTURES ENTRY #183

    • 2 months ago

Show more comments

How to get started with contests

  • Post your contest

    Post Your Contest Quick and easy

  • Get tons of entries

    Get Tons of Entries From around the world

  • Award the best entry

    Award the best entry Download the files - Easy!

Post a Contest Now or Join us Today!