Component Engineers for hire in Malaysia
Showing 10 results
Sponsored Freelancers
-
Hire ajmelhakimi
Asset Management, Bill of Materials (BOM) Analysis, Bill of Materials (BOM) Optimization, Data Analytics, EnergyCX Lestari is a forward-looking consulting firm delivering end-to-end engineering solutions across the full project lifecycle—ranging from feasibility studies to detailed design—for renewable energy systems including solar, wind, biomass, hydropower, hydrogen, geothermal, and hybrid technologies. Core Services 1....CX Lestari is a forward-looking consulting firm delivering end-to-end engineering solutions across the full project lifecycle—ranging from feasibility studies to detailed design—for renewable energy systems including solar, wind, biomass, hydropower, hydrogen, geothermal, and hybrid technologies. Core Services 1. Feasibility Studies • Site assessment, resource mapping, and energy yield modeling • Technical and financial viability analysis • Technology selection and configuration 2. Renewable Energy System Design • Grid integration and storage design • System optimization for output, reliability, and lifecycle 3. Environmental & Regulatory Compliance • Local and international standards compliance • Climate risk and resilience integration 4. Digital Engineering & Simulation • Performance simulation, analytics, and forecasting • FEA and CFD for design validation 5. Asset Integrity Management • Condition assessment, preventive/predictive maintenance • Asset life extension studies 6. Material Selection & Corrosion Engineering • Material compatibility and corrosion protection design • Coating selection, cathodic protection, inspection planning Selected Track Records • PV System Design: Developed rooftop solar PV studies based on electricity bills and structural layouts to maximize ROI. • Technical Drawings: Produced layout plans, SLDs, and schedules using CAD tools. • Tender & BOM Preparation: Created full tender packages including BOMs, specs, and drawings. • Site Assessment: Conducted site visits and technical audits for system accuracy and compliance. • Documentation Management: Reviewed and compiled technical files for quality and regulatory adherence. • Technical Pre-Sales & Engineering: Delivered system demos, ROI analysis, and performance comparisons to support client decisions. • Proposal Development: Prepared technical proposals for grid-tied PV, CHP, and wastewater systems. • Standards Compliance: Liaised with regulators such as Utility Board, SEDA, and Energy Commission. • Advanced Technologies: Promoted Maglev chillers, turbo blowers, waste heat generators, and vacuum compressors for high-efficiency applications. • Biomass CHP System: Designed a high-efficiency biomass CHP system with feasibility analysis via HomerPro to demonstrate CO₂ savings. • Wind Turbine Blade Design (6.5 MW): Engineered wind blades using QBlade for site-specific optimization, increasing Cp and reducing LCOE. • Hybrid Wind-Solar Systems: Designed a utility-scale hybrid project achieving 85% renewable penetration, aligned with UN SDGs. • Wind Farm Optimization: Used WindPro for turbine micrositing and AEP maximization while minimizing wake, noise, and environmental impact. • Research Publication: Authored Sustainable Monitoring & Advanced Real-Time Energy Efficiency (SMARTEE)—a peer-reviewed study on IoT-based real-time energy optimization tools. less -
Hire maylynnchung
maylynnchung maylynnchung
$25 USD / hour
Civil/ Structural Engineer, Safety & Health OfficerMalaysiaI am a Civil/Structural Engineer with Professional Status (PEng/Ir) and also a licensed Safety and Health Officer (Green Book Holder). My vast experience includes 10 years experience in design and 8 years in project planning and safety and health. My past projects includes complex steel structures and multi-story...I am a Civil/Structural Engineer with Professional Status (PEng/Ir) and also a licensed Safety and Health Officer (Green Book Holder). My vast experience includes 10 years experience in design and 8 years in project planning and safety and health. My past projects includes complex steel structures and multi-story buildings. My strength including -structural design and modelling both RC and steel -cost estimation -project planning -cash flow planning -project feasibility study -safety and health plan -HIRARC, Job Safety Analysis I am very efficient, helpful and able to complete the task in designated timeline. I can assist in design modelling, develop work program (construction), Safety and Health Plan (includes HIRARC and JSA). less -
Hire cesfengineering
AutoCAD, Bill of Materials (BOM) Analysis, Bill of Materials (BOM) Evaluation, Bill of Materials (BOM) Optimization, Building EngineeringHighly skilled in structural engineering design especially in structural concrete in building works. We also been working with materials like aluminum, glass, timber and stainless steel. We could design to all the major national loading and structural codes and have working experiences in Malaysia, Singapore,...Highly skilled in structural engineering design especially in structural concrete in building works. We also been working with materials like aluminum, glass, timber and stainless steel. We could design to all the major national loading and structural codes and have working experiences in Malaysia, Singapore, Australia, Maldives, UAE, Hong Kong and Sri Lanka. Our services include consultation in preliminary stage, design report and drawings. Welcome those design offices and construction firms looking to outsource part of their projects to manage the staffing overhead and cope with event of unexpected workload. less -
Hire abbytpy
Bill of Materials (BOM) Analysis, Bill of Materials (BOM) Evaluation, Bill of Materials (BOM) Optimization, Content Writing, Data EntryI am a Quantity Surveyor (QS) with extensive experience in construction projects, contract administration, and dispute management. I have been involved in various stages of project delivery, including cost control, tendering, and contract evaluation. Throughout my career, I have worked with reputable organizations...I am a Quantity Surveyor (QS) with extensive experience in construction projects, contract administration, and dispute management. I have been involved in various stages of project delivery, including cost control, tendering, and contract evaluation. Throughout my career, I have worked with reputable organizations such as Lendlease, Leighton, and Gleeds, where I gained strong expertise in preparing tender documents, writing detailed reports, and producing evaluation reports for project awards. I am also proficient in both Chinese and English. Having studied in a Chinese-medium school, I have strong capabilities in reading and writing Chinese, as well as excellent communication skills in English. less -
Hire amirfaiq
Bill of Materials (BOM) Analysis, Bill of Materials (BOM) Evaluation, Bill of Materials (BOM) Optimization, Data Entry, Electrical EngineeringI am an electrical engineer experience in oil & gas, manufacturing, and construction. I have contributed to projects for major companies such as QatarEnergy LNG, PETRONAS, PVEP, and PTTEP. My expertise includes FEED services, detailed design engineering, and power system analysis, with hands-on experience in ETAP,...I am an electrical engineer experience in oil & gas, manufacturing, and construction. I have contributed to projects for major companies such as QatarEnergy LNG, PETRONAS, PVEP, and PTTEP. My expertise includes FEED services, detailed design engineering, and power system analysis, with hands-on experience in ETAP, DIALux, ChalmLite, and PLC programming. less -
Hire Nfaizal9177
Bill of Materials (BOM) Analysis, Bill of Materials (BOM) Evaluation, Bill of Materials (BOM) Optimization, Electrical Engineering, EngineeringI am an experienced Electrical Engineer with over 10 years of expertise in electrical system design and project management. I have successfully contributed to projects including: LV/HV layouts and Single Line Diagrams (SLD) Load calculation & protection coordination Turnkey project management: scheduling,...I am an experienced Electrical Engineer with over 10 years of expertise in electrical system design and project management. I have successfully contributed to projects including: LV/HV layouts and Single Line Diagrams (SLD) Load calculation & protection coordination Turnkey project management: scheduling, budgeting, QC/QS, and site supervision I provide freelance services for contractors, industrial companies, and development projects requiring efficient electrical design and project management expertise. less -
Hire mohanrao2808
I have 11 years working experience for mechanical design. Well verse in 3D design using Inventor, Solidwork , Solid Edge ,keyshoot and FEA simulations. I also providing design service for mechanical industry by using 3D softwares as partimeI have 11 years working experience for mechanical design. Well verse in 3D design using Inventor, Solidwork , Solid Edge ,keyshoot and FEA simulations. I also providing design service for mechanical industry by using 3D softwares as partime less -
Hire zakis77
AutoCAD, Bill of Materials (BOM) Analysis, Bill of Materials (BOM) Evaluation, Bill of Materials (BOM) Optimization, Building EngineeringProject Planner | QS | Construction Professional Describe yourself Construction professional with experience in Project Planning, Quantity Surveying (QS), and site coordination for building and data centre projects. Skilled in project scheduling, progress tracking, BQ measurement, cost monitoring, reporting, and...Project Planner | QS | Construction Professional Describe yourself Construction professional with experience in Project Planning, Quantity Surveying (QS), and site coordination for building and data centre projects. Skilled in project scheduling, progress tracking, BQ measurement, cost monitoring, reporting, and construction coordination. Experienced using Microsoft Project, Primavera P6, and Excel for planning, S-curves, progress reports, and project analysis. I can assist with planning works, BQ take-off, measurement, tender documentation, project reporting, and scheduling support. Interested in fast-track construction projects, project improvement, and helping teams deliver projects more efficiently. less -
Hire MZFA05
AutoCAD, Bill of Materials (BOM) Analysis, Bill of Materials (BOM) Optimization, Building Engineering, Civil EngineeringI'm your friendly freelancer to explore your unstatisfaction feeling of problem. I can help you in designs, bill of material and etc. Now you have brighter day when you seek my help.I'm your friendly freelancer to explore your unstatisfaction feeling of problem. I can help you in designs, bill of material and etc. Now you have brighter day when you seek my help. less -
Hire muammarmegat4
Background profile: ? Profession - Mechanical Design Engineer (R&D) EV product ? Education - Mechanical Engineering Specialized (my service on Freelancer) ✅ Product Design, software SolidWorks ✔️ Prototyping concept designing ✔️ 3D/ 2D technical drawing with GD&T ✔️ Plastic design ✔️ 3D rendering ✔️ Pattern...Background profile: ? Profession - Mechanical Design Engineer (R&D) EV product ? Education - Mechanical Engineering Specialized (my service on Freelancer) ✅ Product Design, software SolidWorks ✔️ Prototyping concept designing ✔️ 3D/ 2D technical drawing with GD&T ✔️ Plastic design ✔️ 3D rendering ✔️ Pattern designing ✅ New product introduction, software SolidWorks ✔️ FEA and CAE simulation ✔️ 3D printing design ✔️ Design for Manufacturing analysis ✔️ Design for Assembly analysis ✔️ Competitor product Research and Development less
