Microcontroller Developers For Hire

Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

  • Hire ahmedmohamed85

    ahmedmohamed85

    Egypt
    45 Reviews
    $35 USD per hour

    Top Skills: Verilog / VHDL, Electronics, Electrical Engineering, Microcontroller, Engineering

    8 year's experience in digital system design using VHDL and verilog for FPGA's and CPLD's both for Xilinx and Altera Chips. I also have 8 years experience in working with Xilinx Ise form version 6.2 to 14.7 and Altera Quarus 2 for VHDL , verilog, system verilog and ip in addition to experience in Vivado design tool ...

    8 year's experience in digital system design using VHDL and verilog for FPGA's and CPLD's both for Xilinx and Altera Chips. I also have 8 years experience in working with Xilinx Ise form version 6.2 to 14.7 and Altera Quarus 2 for VHDL , verilog, system verilog and ip in addition to experience in Vivado design tool, and HLS and digital design using zynq7000 less

  • Hire AhmedHosaam

    AhmedHosaam

    Egypt
    4 Reviews
    $25 USD per hour

    Top Skills: Microcontroller, Electronics, Electrical Engineering, PCB Layout, Engineering

    I am offering you an excellent reliable service and full support even after the project is completed! I am experienced in the following fields: 1) Embedded systems. Years of experience with most popular architectures and MCUs, always up to date with every new innovation. Worked on ARM M4F, M0, and M3, Arduino, AVR, ...

    I am offering you an excellent reliable service and full support even after the project is completed! I am experienced in the following fields: 1) Embedded systems. Years of experience with most popular architectures and MCUs, always up to date with every new innovation. Worked on ARM M4F, M0, and M3, Arduino, AVR, and PIC. I have good experience with RTOS as well like FREERTOS and TI RTOS. Worked using Keil, TI CCS, IAR, Eclipse. 2) PCB Design and manufacturing. 2 years experience in using Egale CAD software for designing multi-layer PCBs including RF and flex PCBs. 3) Control theory. Including PID, Kalman/extended Kalman/Adaptive extended Kalman filter applications in robotics, Very experienced in Navigation(AHRS/INS/DGPS) and Motor control applications! 4) Power electronics for DC and AC motor control. 5) Robotics, Including Copters and rovers with an excellent experience in Auto-pilots. I guarantee an excellent reliable service and support for your project! less

  • Hire highfliercnr

    highfliercnr

    China
    17 Reviews
    $30 USD per hour

    Top Skills: PCB Layout, Electronics, Electrical Engineering, Microcontroller, CAD/CAM

    Electronic Engineer over 10 years experiecne in Mobile phone hardware R&D and HD video compressing hardware developments. Experienced DDR2,DDDR3, Gigabit Ethernet, DC-DC, WIFI, Bluetooth, CDMA/GSM, GPS Module, PCI standard compliant Video Card, Image Sensor board...etc. Rich experience in multilayer board des ...

    Electronic Engineer over 10 years experiecne in Mobile phone hardware R&D and HD video compressing hardware developments. Experienced DDR2,DDDR3, Gigabit Ethernet, DC-DC, WIFI, Bluetooth, CDMA/GSM, GPS Module, PCI standard compliant Video Card, Image Sensor board...etc. Rich experience in multilayer board design(blind and bury vias). Include trace impedance control, ESD, and EMI noise suppression. High-speed digital signal board design and Analog RF board design. Your project success is my happiness. I would not disappoint you if you select my service. EDA Tools: Orcad, Altium Designer, PADs less

  • Hire k03ak

    k03ak

    Ukraine
    15 Reviews
    $35 USD per hour

    Top Skills: PCB Layout, Electronics, Electrical Engineering, Microcontroller, C Programming

    We are a team of highly skilled electronic engineers with more than 10 years of experience in the field of electronics. Our team consist of 5 members: 2 Ph.D, 2 postgraduate students / Masters of Electronics, 1 Master of Electronics. Recently we've been working on Industrial Automatics and Electronics. Our fields ...

    We are a team of highly skilled electronic engineers with more than 10 years of experience in the field of electronics. Our team consist of 5 members: 2 Ph.D, 2 postgraduate students / Masters of Electronics, 1 Master of Electronics. Recently we've been working on Industrial Automatics and Electronics. Our fields of interest are: Schematic design, Prototyping, PCB Design, Development of Electronic systems, Firmware and Software development, Preparing of Batch production, Small Batch Production.. Other: C/C++, C#, Object-oriented programming, Microcontoller programming (Atmel AVR), PCB Design, Electronics design and engineering. Alitum Designer Microsoft Visual Studio (6.0-2013) Java, Android applications development Windows Drivers Development (DDK, WDK), Assembly, Low-level programming HTML, JavaScript, jQuery, MooTools, PHP less

  • Hire sagradoamicus

    sagradoamicus

    Pakistan
    7 Reviews
    $40 USD per hour

    Top Skills: Electronics, Engineering, C Programming, Technical Writing, Microcontroller

    I am an Electronics and Electrical Design Engineer with the areas of expertise in Embedded System, product prototyping, PCB design and layout and firmware development for systems. I have proficiency in following software tools: 1. Altium Designer 2. Cadence ORCAD 3. KICAD 4. MATLAB 5. Mikro C (for all c ...

    I am an Electronics and Electrical Design Engineer with the areas of expertise in Embedded System, product prototyping, PCB design and layout and firmware development for systems. I have proficiency in following software tools: 1. Altium Designer 2. Cadence ORCAD 3. KICAD 4. MATLAB 5. Mikro C (for all controllers) 6. Arduino IDE 7. Raspberry pi 8. Eagle CAD 9. KICAD 10.Proteus Design Suite I also have experience in design of IoTs. I have almost 8 years of experience in development of products including the custom electronics. I can take your project from concept to finished product. I am also experienced in working with a number of communication devices like NFC, GPS WifI, Ethernet, Zigbee, GSM and others. less

  • Hire websat13

    websat13

    Algeria
    11 Reviews
    $30 USD per hour

    Top Skills: Microcontroller, C Programming, Electronics, Electrical Engineering, PCB Layout

    hello everybody i have now over 1 year working at a freelancer, and i have also 10 years experience in developing embedded systems. i have skills in general electronics, PCB design (altium designer and eagle cad), simulation software (Proteus), Programming Software (Keil C51, C166, MikroC (PIC, 8051, AVR), MPLAB ...

    hello everybody i have now over 1 year working at a freelancer, and i have also 10 years experience in developing embedded systems. i have skills in general electronics, PCB design (altium designer and eagle cad), simulation software (Proteus), Programming Software (Keil C51, C166, MikroC (PIC, 8051, AVR), MPLAB (C18,10F,12F, 16F), Code Vision AVR, Hitech (PIC, AVR) andWinAVR.). i have also skills in differents kinds of microcontrollers programming (Microchip,Avr,Stm,Arduino) and communication systems (Bluetooth, Wifi,zigbee). i have made a lot of projects and all the employers i have had are satisfied. so i am ready to go at any time . less

  • Hire uetian09ee506

    uetian09ee506

    Pakistan
    10 Reviews
    $50 USD per hour

    Top Skills: Electrical Engineering, Matlab & Mathematica, Electronics, Circuit Design, Engineering

    I am an Electrical Engineer having specialization in Electronics and Control, teaching in Electrical Department at FAST National University Pakistan. I am also persuing my MS degree in Electrical Engineering with specialization in CONTROL. I have taught the followings courses, and also done many projects related to ...

    I am an Electrical Engineer having specialization in Electronics and Control, teaching in Electrical Department at FAST National University Pakistan. I am also persuing my MS degree in Electrical Engineering with specialization in CONTROL. I have taught the followings courses, and also done many projects related to these subjects as well as related to consumer electronics products. 1. Control System Design & Modelling (Continuous, Discrete, Linear, Non-Linear, Optimal, Fuzzy Logic + Matlab & Simulink) 2. Digital Logic Design (Verilog, VHDL, Logisim) 3. Digital System Design (Verilog, VHDL, Logisim) 4. Controllers (8086 processor, 8051 Family, Arduino, PIC Family) 5. Power Electronics (PSIM, MATLAB, Orcad, PSpice) 6. Control of Electric Machine Drives 7. Circuit Analysis and Designe + Many Others 8. PCB Design (Proteous AREAS + Ultiboard + Altium Designerm + Diptrace) I assure you, if you assign your project to me, you surely gonna work with me in future. less

  • Hire lyndonhammill

    lyndonhammill

    United Kingdom
    7 Reviews
    $50 USD per hour

    Top Skills: Electronics, Microcontroller, Electrical Engineering, Manufacturing Design, Circuit Design

    Please send me a message for free advice. I am equipped to design and build your custom circuit board and develop your custom firmware and supply you with a working prototype through the post and supply all the necessary files for you to reproduce yourself of have reproduced by a third party.

    Please send me a message for free advice. I am equipped to design and build your custom circuit board and develop your custom firmware and supply you with a working prototype through the post and supply all the necessary files for you to reproduce yourself of have reproduced by a third party. less

  • Hire mechatronicsengr

    mechatronicsengr

    Pakistan
    10 Reviews
    $25 USD per hour

    Top Skills: Embedded Software, Microcontroller, LabVIEW, C Programming, Assembly

    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory Autom ...

    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory Automation and Remote Inventory Management. - RFID Based Loyal Card for Loyal Customers. - Bluetooth Communication between MCU and RFID Host. - Vehicle Tracking using GPS and Accelerometer. and a lot more. I have expertise over all communication protocols of Microcontroller: - SPI (Master/Slave) - UART - USART - I2C (Master/Slave). - Ethernet - Wifi - Bluetooth etc.. I am expert in interfacing sensor modules with microcontroller. I believe in providing superb quality provided that the deadlines are met. Moreover, during the course of my project I would keep you updated regarding the status. Service Description: * Wireless Interfaces (ISM Band FSK, OOK, XBee, ZigBee, TI 2.4GHz, Bluetooth, WiFi, etc) * LED lighting control * DC Motor Control and Actuator Control Solutions * Touch Sense * RF Energy Detection Systems * Home Automation systems * Weather Stations (Temperature, Pressure, Humidity, Wind Speed, Positioning, and Ambient Light sensing) * GPS Tracking Systems * USB Based Embedded Products * Power Over Ethernet (POE) Solution * On Board / off board DC/DC Low quiescent current, Linear and Switch Mode Power Supply solutions for embedded applications ----------------------------------------------------- * PCB Design (Printed Circuit Board) * Schematics and Bill of Material * Block Diagram and Design Documentation * Suggesting you PCB and PCBA vendors or managing the PCB and PCBA process. * Part Selection, Parts Sourcing * Manufacturing File generation * High Speed, High Density Multi-Layer PCB Layout * Embedded Software / Firmware design development * 3D Step Models of the PCB for Integration with MCAD tools. * Board Bring-up: Test codes in C/C++. * DSP Design (Digital Signal Processing) * Power / Signal Integrity Analysis * System / Hardware Design -------------------------------- * Circuit Simulation Training using Altium, MultiSim and Proteus * Embedded Firmware Design Training (C/C++, Assembly) * Schematics and PCB Design training less

  • Hire PrachyaSuri

    PrachyaSuri

    Thailand
    15 Reviews
    $20 USD per hour

    Top Skills: Arduino, Microcontroller, GPS, Electrical Engineering, Electronics

    Master's Degree in Engineering (Electrical Engineering) - Electronic R&D Division Manager. Experience: - Micro-Controller, Embedded (Arduino, PIC, Raspberry Pi) - Android Programming. - Communication (Zigbee, GSM, GPRS, 3G, SMS, RF, IR) - GPS - SCADA - Home Automation. - RFID (Mifare) - Servo Motor - Arduino Ethern ...

    Master's Degree in Engineering (Electrical Engineering) - Electronic R&D Division Manager. Experience: - Micro-Controller, Embedded (Arduino, PIC, Raspberry Pi) - Android Programming. - Communication (Zigbee, GSM, GPRS, 3G, SMS, RF, IR) - GPS - SCADA - Home Automation. - RFID (Mifare) - Servo Motor - Arduino Ethernet (Web Server, Web Service) - IoT My previous demo for my customer on youtube https://www.youtube.com/playlist?list=PLY4y7VpowGlnbeA3KrnUk5gfbbYnGMOQk less