Acoustical Engineers, Internet of Things Engineers, Embedded Software Developers and Web Developers For Hire

  • Acoustical Engineering
  • Internet of Things (IoT)
  • Embedded Software
  • HTML
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

Showing 2628 results
  • Hire Euroaccount

    Euroaccount

    Russian Federation
    $40 USD / hour
    Mechanical Engineer, Electrical Engineer
    Russian Federation
    3.6
    1 review $40 USD per hour
    I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using...
    I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using Adams, Nastran, Patran HARDWARE - Schematic Digital, Analog, Power electronics. - PCB layout, routing and assembly using Altium designer, Eagle CAD, Allegro, CADSTAR, PADS, Protel99.. - Product design and mechanical design in Solidworks. less
  • Hire xiaoqideng

    xiaoqideng

    China
    $30 USD / hour
    Embedded System & IoT Designer & Linux & Developer
    China
    5.5
    9 reviews $30 USD per hour
    Dear client, Thank you for visiting my profile. As a high-skilled embedded system designer, developer and manager, I have full experience and rich knowledge in Embedded System Development. ========================= Skill Overview =============== 1) Rich Schematics and PCB designer - Over 10 years in designing...
    Dear client, Thank you for visiting my profile. As a high-skilled embedded system designer, developer and manager, I have full experience and rich knowledge in Embedded System Development. ========================= Skill Overview =============== 1) Rich Schematics and PCB designer - Over 10 years in designing using Altium Design Tool and Simulation Tools 2) Firmware Development - Rich experiences in C/C++/Embedded C - I like using various of MPU, ARM, PLD and embedded system equipment STM32 family, NRF51822/52832/nRF52840, CC2540/CC2541/CC26xx, ESP8266/ESP32, PIC16F/18F/33F, Atmega family, 8051 family, Arduino, Atmel, - Experience with Keil, IAR, Atmel Studio, QT IDE, Arduino, Visual Studio, - Rich experience in variant peripherals: UART, I2C, SPI, USB, Ethernet, Bluetooth, Wifi, Gyro/Accelometor, GPS, GSM/GPRS, xBee, Zigbee. - LED controlling wih Neopixels. I can adjust and work no matter what my client's timezone is. Thank you for your time! less
  • Hire AlexFaster

    AlexFaster

    Russian Federation
    $25 USD / hour
    Desktop and Embedded software/hardware developer.
    Russian Federation
    4.9
    3 reviews $25 USD per hour
    I am Certificated Software and Electronics engineer with experience over 20 years. Writing software for computer vision (OCR, OpenCV), video processing (FFmpeg), desktop, m2m communications and embedded devices. I know c/c++/c#/Delphi/Assembler and all about Windows processes and Windows API. Also I am a device...
    I am Certificated Software and Electronics engineer with experience over 20 years. Writing software for computer vision (OCR, OpenCV), video processing (FFmpeg), desktop, m2m communications and embedded devices. I know c/c++/c#/Delphi/Assembler and all about Windows processes and Windows API. Also I am a device developer: schematic, PCB prototyping, software code for PC and embedded device both. XMOS, STM32, Atmel SAMx, SiLabs, PI3 and Arduino - my preferable platforms for embedded devices. less
  • Hire onpost

    onpost

    Russian Federation
    $15 USD / hour
    Firmware programmer
    Russian Federation
    4.8
    13 reviews $15 USD per hour
    I have been working in embedded programming for more than 11 years. Throughout my career I have developed firmware for UAVs, UGVs and other autonomous systems with multiple MCUs or DSPs. Implemented image processing for an optical navigating system. Digital signal processing. Math simulation of the systems under...
    I have been working in embedded programming for more than 11 years. Throughout my career I have developed firmware for UAVs, UGVs and other autonomous systems with multiple MCUs or DSPs. Implemented image processing for an optical navigating system. Digital signal processing. Math simulation of the systems under development in Matlab and Mathcad. I have got experience in firmware development for different MCUs and CPUs (including DSPs): Texas Instruments, STMicroelectronics (STM32, STM8), Microchip/Atmel (PIC, ATSAM, ATMega, including Arduino), SiLabs, Analog Devices, NXP, Freescale, Renesas. Used IDEs are: IAR Embedded Workbench, Keil, Eclipse, AVR/Atmel Studio, Arduino IDE, MPLAB, Code Composer Studio, Simplicity Studio, Segger Embedded Studio, Atollic TrueStudio, CrossWorks, Raisonance Ride7. Programming languages: C, C++, Assembler (AVR, 8051, PIC, PowerPC), Matlab. less
  • Hire tifoda

    tifoda

    Ukraine
    $15 USD / hour
    Microcontroler based systems engenier
    Ukraine
    5.0
    20 reviews $15 USD per hour
    Designing different electronics devices, mostly based on avr, arm microcontrollers and boards with them ike arduino, stm-discovery etc for some years. Using enumerous amount of different perihery moduls and discover new ones all the time. Writing middle complexity soft for PC using c#.
    Designing different electronics devices, mostly based on avr, arm microcontrollers and boards with them ike arduino, stm-discovery etc for some years. Using enumerous amount of different perihery moduls and discover new ones all the time. Writing middle complexity soft for PC using c#. less
  • Hire mechatronicsengr

    mechatronicsengr

    Pakistan
    $25 USD / hour
    Embedded Systems Design and Development Engineer
    Pakistan
    6.1
    37 reviews $25 USD per hour
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory...
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory Automation and Remote Inventory Management. - RFID Based Loyal Card for Loyal Customers. - Bluetooth Communication between MCU and RFID Host. - Vehicle Tracking using GPS and Accelerometer. and a lot more. I have expertise over all communication protocols of Microcontroller: - SPI (Master/Slave) - UART - USART - I2C (Master/Slave). - Ethernet - Wifi - Bluetooth etc.. I am expert in interfacing sensor modules with microcontroller. I believe in providing superb quality provided that the deadlines are met. Moreover, during the course of my project I would keep you updated regarding the status. Service Description: * Wireless Interfaces (ISM Band FSK, OOK, XBee, ZigBee, TI 2.4GHz, Bluetooth, WiFi, etc) * LED lighting control * DC Motor Control and Actuator Control Solutions * Touch Sense * RF Energy Detection Systems * Home Automation systems * Weather Stations (Temperature, Pressure, Humidity, Wind Speed, Positioning, and Ambient Light sensing) * GPS Tracking Systems * USB Based Embedded Products * Power Over Ethernet (POE) Solution * On Board / off board DC/DC Low quiescent current, Linear and Switch Mode Power Supply solutions for embedded applications ----------------------------------------------------- * PCB Design (Printed Circuit Board) * Schematics and Bill of Material * Block Diagram and Design Documentation * Suggesting you PCB and PCBA vendors or managing the PCB and PCBA process. * Part Selection, Parts Sourcing * Manufacturing File generation * High Speed, High Density Multi-Layer PCB Layout * Embedded Software / Firmware design development * 3D Step Models of the PCB for Integration with MCAD tools. * Board Bring-up: Test codes in C/C++. * DSP Design (Digital Signal Processing) * Power / Signal Integrity Analysis * System / Hardware Design -------------------------------- * Circuit Simulation Training using Altium, MultiSim and Proteus * Embedded Firmware Design Training (C/C++, Assembly) * Schematics and PCB Design training less
  • Hire manojkhichar

    manojkhichar

    India
    $25 USD / hour
    Under Top 3% Ranked - 99.99% Committed/Delivered
    India
    6.7
    150 reviews $25 USD per hour
    * ON TIME * ON BUDGET * 100% PERFECTION => TECHNOLOGY: PHP, PYTHON, Ruby, IONIC, XCODE => SQL: MySQL, MongoDB => HTML, CSS, JavaScript, Bootstrap, Material, Foundation, Flexbox => PHP MVC: Laravel, Yii, Codeigniter, Cakephp => CMS: WordPress, Joomla, OpenCart, PrestaShop, Magento, Express Engine => Online...
    * ON TIME * ON BUDGET * 100% PERFECTION => TECHNOLOGY: PHP, PYTHON, Ruby, IONIC, XCODE => SQL: MySQL, MongoDB => HTML, CSS, JavaScript, Bootstrap, Material, Foundation, Flexbox => PHP MVC: Laravel, Yii, Codeigniter, Cakephp => CMS: WordPress, Joomla, OpenCart, PrestaShop, Magento, Express Engine => Online Tools: Shopify, Wix, Weebly, SquareSpace => JS Framework: AngularJS, Node.js, Vue.js, JQuery, jQuery Mobile, Express.js => ALL KIND OF API'S: => PAYMENT GATEWAYS: PayPal, Stripe, 2checkout, Square, SecurePay, Worldpay, Authorize.net, 2Checkout.com, Braintree, Paytm, CCAvenue, RazorPay with all europian countries gateways. => SHIPPING: Easypost, Shippo, Shipstation, Stamps, Shipengine, Easyship, Endicia, Aftership, Shipbob, Postmaster etc. => CRM: Zoho, Salesforce, Hubspot, SugerCRM, Bitrix24 => MOBILE APPS: Android, iOS => DIGITAL MARKETING: SEO, SMO, SME, SMM => BRANDING/GRAPHICS ART: Adobe (Photoshop, Lightroom, Illustrator, InDesign, Adobe XD, After Effects) less
  • Hire polite90

    polite90

    China
    $20 USD / hour
    Senior Windows and Mobile Developer
    China
    3.5
    1 review $20 USD per hour
    I have rich experience for 10 years Rich C/C++/C# developing experience with MS VisualStudio (Special MFC/WPF) Strong experiences with Java development, debugging and test driven development Rich experiences with Database such as MySQL, MS SQL and SQLite. MVC framework experience such as JSP, Spring. PHP developing...
    I have rich experience for 10 years Rich C/C++/C# developing experience with MS VisualStudio (Special MFC/WPF) Strong experiences with Java development, debugging and test driven development Rich experiences with Database such as MySQL, MS SQL and SQLite. MVC framework experience such as JSP, Spring. PHP developing using framework such as codeigniter. Interact with JSON, XML Perfect Version Management experiences with SVN or GIT. Prior experience with Web/RESTful Services. Android Native Flutter, Xamarin, React Native fast and beautiful app design and build GUI Machine Learning - Python, Tensor Electron and Nodejs matlab Image Processing using OpenCV JSP, PHP I will do my best to satisfy the client's request. less
  • Hire Muhammadaqibdutt

    Muhammadaqibdutt

    Pakistan
    $25 USD / hour
    Raspberry Pi, Arduino, iOS/Android , OpenCV
    Pakistan
    2.8
    3 reviews $25 USD per hour
    I am an embedded programmer with the expertise in Arduino and Raspberry Pi. I am the founder and innovator at electronicshobbyists.com and i am doing different projects there. My profile on other websites 1- https://maker.pro/profile/muhammad.aqib.1 2- https://www.hackster.io/muhammad-aqib
    I am an embedded programmer with the expertise in Arduino and Raspberry Pi. I am the founder and innovator at electronicshobbyists.com and i am doing different projects there. My profile on other websites 1- https://maker.pro/profile/muhammad.aqib.1 2- https://www.hackster.io/muhammad-aqib less
  • Hire DreamCha

    DreamCha

    China
    $38 USD / hour
    Senior Electrical & Embedded System Engineer
    China
    5.8
    12 reviews $38 USD per hour
    Dear client By creating a cooperative and inspirational working culture, I motivate myself not only to write code and implement software, but also to find solutions to clients business problems. I always have the opportunity to challenge myself and grow and expand my horizons through international assignments. With...
    Dear client By creating a cooperative and inspirational working culture, I motivate myself not only to write code and implement software, but also to find solutions to clients business problems. I always have the opportunity to challenge myself and grow and expand my horizons through international assignments. With 15 years industry experience, my expertise are as follows: - Circuit & Schematic & PCB design - Prototype & Mass production - Microcontroller programming using STM32WB/STM32, ESP32/ESP8266, Arduino, BLE/Bluetooth, WiFi, Ethernet, Zig-bee, GSM/GPS/GPRS/GNSS, Z-Wave - Various LCDs & Sensors, I2C/I2S/SPI, RS232/485, Lora, NFC/RFID - Raspberry Pi using node.js, QT, etc. - various PLC & HMI programming such as Nextion, ADAM, Siemens, Delta, Mitsubishi - Various Servo/Motor control - Mobile app development - C/C++, C#,VB, Embedded C/C++ I will do my best to complete your project quickly, and I will provide the best service of high quality. Thank you. less

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""