Material Coating Specialists and Engineers For Hire

  • Material Coating
  • Engineering
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

  • Hire ahmedmohamed85
    6.8
    136 reviews $50 USD per hour
    10 year's experience in digital system design using VHDL and verilog for FPGA's and CPLD's both for Xilinx and Altera Chips. I also have 10 years experience in working with Xilinx Ise form version 6.2 to 14.7 and Altera Quarus 2 for VHDL , verilog, system verilog and ip in addition to experience in Vivado design tool,...
    10 year's experience in digital system design using VHDL and verilog for FPGA's and CPLD's both for Xilinx and Altera Chips. I also have 10 years experience in working with Xilinx Ise form version 6.2 to 14.7 and Altera Quarus 2 for VHDL , verilog, system verilog and ip in addition to experience in Vivado design tool, and HLS and digital design using zynq7000 less
  • Hire anujgargiitk
    8.3
    63 reviews $50 USD per hour
    I am a mechanical engineer with a dedicated team of mechanical, electronics hardware and software engineers with 9 international papers and 5 patents. We specialize in custom industrial and commercial machine/product design, development & fabrication. We do concept design, 3D modeling, hardware design, PCB design,...
    I am a mechanical engineer with a dedicated team of mechanical, electronics hardware and software engineers with 9 international papers and 5 patents. We specialize in custom industrial and commercial machine/product design, development & fabrication. We do concept design, 3D modeling, hardware design, PCB design, microcontroller (Arduino) programming, PLC & sensor instrumentation of specialized products & machines. We also do various analysis like stress (FEM), dynamic analysis, CFD, circuit simulations, etc apart from conducting experimental research & development. We also have inhouse prototyping and manufacturing facility including 3D printing i.e. SLA and SLS in 3 different polymers, vacuum casting for a range of polymers and aluminum, CNC milling and turning, etc. PCB printing, hardware assembly, product integration & testing is also available. less
  • Hire Waxavi
    5.0
    16 reviews $21 USD per hour
    Engineer & Trader, Freelancer. I've been specializing in c# and developing algos for traders using the cTrader and cAlgo platform. -------------------- DISCLAIMER -------------------- -Not responsible for the wins/losses/performance of the bot, I'm just responsible for the code indications. -Not responsible for bugs...
    Engineer & Trader, Freelancer. I've been specializing in c# and developing algos for traders using the cTrader and cAlgo platform. -------------------- DISCLAIMER -------------------- -Not responsible for the wins/losses/performance of the bot, I'm just responsible for the code indications. -Not responsible for bugs of the code during live trading, however in case of a bug is found I'll fix it at no cost. -Source code will be released once payment is completed. -Always encourage to test the bot under demo/backtesting first before testing it. -Some bots may leave position open in live trading if platform crashes or disconnects hence the bot will stop and will no longer manage these positions, it is responsibility of the trader to manage these positions in such cases. less
  • Hire jedjedjed03
    4.6
    9 reviews $20 USD per hour
    I am a Filipino electrical engineer with active experience in engineering design, engineering calculation, power generation, manufacturing, and construction. Competencies: - Electrical Power Generation Design (DG Sizing) - Low Voltage Distribution System Design (Transformer Sizing, Circuit Breaker Sizing, Fuse...
    I am a Filipino electrical engineer with active experience in engineering design, engineering calculation, power generation, manufacturing, and construction. Competencies: - Electrical Power Generation Design (DG Sizing) - Low Voltage Distribution System Design (Transformer Sizing, Circuit Breaker Sizing, Fuse Sizing, Cable Sizing, Distribution Panel Sizing) - Structured Cabling design - Fire Alarm System design (Voltage Drop Calculation, Battery Calculation, Cause and Effect Matrix, and etc.) - Electric Power Calculations (Short Circuit, Voltage Drop, Panel Schedule, Cable Schedule) - Local and International Codes (NFPA 70, NFPA 72, NFPA 101, ARMACO Codes, SBC, IBC, IFC, PEC and BS 7671), - Lighting Design - Sports, Interior, and Exterior Lighting - Drafting - Filipino translator Softwares: - DIAlux EVO and DIAlux 4 - EDSA Paladin - Ecodial - SIMARIS - ETAP - AutoCAD 2014 - Autocad Electrical 2015 - BricsCAD - Sketchup - Matlab - Microsoft Office - MEP REVIT less
  • Hire winmaclin
    6.0
    3 reviews $14 USD per hour
    ★★★ 13+ Years Successfully Completed ★ 3000+ Esteemed Clientele ★ 300+ In-house Professionals ★★★ Holding expertise with Multi-layered S/W designing, development, maintenance, enhancement using OOPs concepts, Multi thread concepts & Collection framework with Unit/Integration Testing & TDD ➤ OUR TECH STACK ⟶ Design ➧...
    ★★★ 13+ Years Successfully Completed ★ 3000+ Esteemed Clientele ★ 300+ In-house Professionals ★★★ Holding expertise with Multi-layered S/W designing, development, maintenance, enhancement using OOPs concepts, Multi thread concepts & Collection framework with Unit/Integration Testing & TDD ➤ OUR TECH STACK ⟶ Design ➧ Wireframe, PSD ⟶ Client-Side ➧ Bootstrap, JavaScript, AngularJS, ReactJS ⟶ Server-Side➧ C#.NET, Java, PHP, ROR, NodeJS, Python ⟶ CMS➧ WordPress, Joomla, Magento ⟶ DB➧ MsSQL, MySQL, PostgreSQL, Oracle, MongoDB ⟶ Mobility➧ iOS & Android, Objective-C & Java SDK, Swift, PhoneGap, Ionic, React Native, Unity3D ➤ SKILLED TEAM ⟶ 6 Project Managers ⟶ 10+ Business Managers ⟶ 18+ Team Leaders ⟶ 150+ Web Developers ⟶ 100+ Mobile Developers ⟶ 60+ UI/UX & QA Team ➤ OUR STRENGTHS ⟶ Regular Communication ⟶ Daily Work Update Report ⟶ 100% Guaranteed Plagiarism Free Work ⟶ Technology/Process Maturity ↳ FIXED COST ↳ TIME & MATERIAL(Hourly) ↳ DEDICATED TEAM ↳ HYBRID MODEL (Fixed + Hourly) less
  • Hire mechatronicsengr
    5.3
    12 reviews $25 USD per hour
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory...
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory Automation and Remote Inventory Management. - RFID Based Loyal Card for Loyal Customers. - Bluetooth Communication between MCU and RFID Host. - Vehicle Tracking using GPS and Accelerometer. and a lot more. I have expertise over all communication protocols of Microcontroller: - SPI (Master/Slave) - UART - USART - I2C (Master/Slave). - Ethernet - Wifi - Bluetooth etc.. I am expert in interfacing sensor modules with microcontroller. I believe in providing superb quality provided that the deadlines are met. Moreover, during the course of my project I would keep you updated regarding the status. Service Description: * Wireless Interfaces (ISM Band FSK, OOK, XBee, ZigBee, TI 2.4GHz, Bluetooth, WiFi, etc) * LED lighting control * DC Motor Control and Actuator Control Solutions * Touch Sense * RF Energy Detection Systems * Home Automation systems * Weather Stations (Temperature, Pressure, Humidity, Wind Speed, Positioning, and Ambient Light sensing) * GPS Tracking Systems * USB Based Embedded Products * Power Over Ethernet (POE) Solution * On Board / off board DC/DC Low quiescent current, Linear and Switch Mode Power Supply solutions for embedded applications ----------------------------------------------------- * PCB Design (Printed Circuit Board) * Schematics and Bill of Material * Block Diagram and Design Documentation * Suggesting you PCB and PCBA vendors or managing the PCB and PCBA process. * Part Selection, Parts Sourcing * Manufacturing File generation * High Speed, High Density Multi-Layer PCB Layout * Embedded Software / Firmware design development * 3D Step Models of the PCB for Integration with MCAD tools. * Board Bring-up: Test codes in C/C++. * DSP Design (Digital Signal Processing) * Power / Signal Integrity Analysis * System / Hardware Design -------------------------------- * Circuit Simulation Training using Altium, MultiSim and Proteus * Embedded Firmware Design Training (C/C++, Assembly) * Schematics and PCB Design training less
  • Hire ARCDiM
    4.8
    10 reviews $15 USD per hour
    Hello! We are glad to see you in our profile page. --- Our company is engaged in architectural design of residential, public and comercial buildings. We can create for you 2D CAD drawings, 3D architectural modellings, exterior and interior design, etc... --- Our company has cooperated with many architectural...
    Hello! We are glad to see you in our profile page. --- Our company is engaged in architectural design of residential, public and comercial buildings. We can create for you 2D CAD drawings, 3D architectural modellings, exterior and interior design, etc... --- Our company has cooperated with many architectural companies and clients in Ukraine and foreign countries (Lebanon, Estonia, Spain, Austria, Germany, Saudi Arabia, USA, Canada, Australia, India, Brunei Darussalam, United Kingdom, Mongolia, Malaysia,etc...). --- We are always glad to cooperate, perform tasks quickly and efficiently. Best regards, company «ARCDiM» less
  • Hire freelancerneyer
    4.9
    16 reviews $25 USD per hour
    Hello; Welcome to my profile. I am a professional writer with a 24/7 customer support with willingness and ability to work within your Budget and requirements. I hold a Degree in Bachelor of Business Information Technology, Postgraduate Diploma in Project Management, Master’s in Business administration, ACCA...
    Hello; Welcome to my profile. I am a professional writer with a 24/7 customer support with willingness and ability to work within your Budget and requirements. I hold a Degree in Bachelor of Business Information Technology, Postgraduate Diploma in Project Management, Master’s in Business administration, ACCA finalist and CPA K. I have been working as an Academic Writer for a period spanning over six years and have worked for various employers and clients. I also have experience in Rewriting and writing of articles, Thesis and Dissertations writing, reports, case studies, Business Plans, personal statements, marketing plans, comparative studies, literature review and research. I provide well researched academics using HARVARD, APA, MLA, OSCOLA, IEEE, Chicago, Oxford styles plus any other writing styles. Given a chance to work on your project I guarantee the best quality work output. Your total satisfaction is my FIRST priority!!! less
  • Hire arslanuet123
    5.4
    36 reviews $20 USD per hour
    I am studied electrical engineering from University of Engineering and technology,Lahore. And then I did Masters in Computer Science from LUMS. I have done many stalwart projects during my engineering and still doing.I have good command on all subjects like Circuit Analysis and design, Digital logic...
    I am studied electrical engineering from University of Engineering and technology,Lahore. And then I did Masters in Computer Science from LUMS. I have done many stalwart projects during my engineering and still doing.I have good command on all subjects like Circuit Analysis and design, Digital logic design, electronics, Control Systems micro-processor systems, C programming. Assembly programming Verilog/VHDL Power System Analysis PCB Design I have written a lot of reports,technical papers and latest technical paper written by me is 'UHV Transmission in china' using IEEE standard. During my Master's studies I have done lots of projects in Computer Science. 1- Smart Goggles (Python - A device for visually blind people). 2- Identifier (Python - Web App) 3- ATM system (ASP.NET - WebApp) 4- Motion Detector (Python) 5- Point of sale (ASP.NET) To be helpful to someone is really worth miles and it is a good place where you communicate,contribute,learn and help others. less
  • Hire valor312
    2.6
    2 reviews $30 USD per hour
    Thanks for visiting my profile. These are my skills: ★ iPhone app, iPhone UI, Swift, Objective-C - Social apps - Map, GPS tracking - In-App payments / In-App Billing / In-App purchase - Barcode, QR code scan - Image, Video, Audio manipulation - Real-time Chatting - BLE communcating ★ Android...
    Thanks for visiting my profile. These are my skills: ★ iPhone app, iPhone UI, Swift, Objective-C - Social apps - Map, GPS tracking - In-App payments / In-App Billing / In-App purchase - Barcode, QR code scan - Image, Video, Audio manipulation - Real-time Chatting - BLE communcating ★ Android app, Hybrid apps, Augmented/Virtual Reality, Cryptocurrency - Ionic & React native Hybrid mobile applications - AR/VR, 2D/3D Game - SLAM - Blockchain/Bitcoin ★ PHP, MySQL, NodeJs, - Skilled in HTML5, CSS, JavaScript, and jQuery - PHP Laravel, codeIgniter Web Frameworks - Angular4, 5, 6, 7 I am sure for deliberation of satisfactory works in time and a proper communication and availability. Thank you. less

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""