Electronics Engineers and Engineers For Hire

  • Electronics
  • Engineering
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

  • Hire ashrafshekh
    6.5
    49 reviews $20 USD per hour
    We are the Team Of Experienced Professional in the design field. We are working in the design field since past 7 year and able to design almost everything. We work specially in the field of Mechanical Engineering, New product development, concept design, concept development, Product design, 3D modelling, 3D...
    We are the Team Of Experienced Professional in the design field. We are working in the design field since past 7 year and able to design almost everything. We work specially in the field of Mechanical Engineering, New product development, concept design, concept development, Product design, 3D modelling, 3D printing, Simulation, Finite element analysis (FEA), Computational Fluid dynamics (CFD), Structural Analysis, Academic writing, Engineering Assignments and much more. We are using engineering Design tool i.e Solidworks, Ansys, Creo, CATIA, Autocad, Autodest revit, Siemens NX, MATLAB, 3DMax and many more. We have completed more than 500 Projects in last 7 years and still counting. We can assure you about the quality of our work, we request you give us chance to serve you. we are available here 24x7 and can discuss in any time zones with perfect communication. less
  • Hire rojuwon1222
    6.5
    35 reviews $35 USD per hour
    Thank you for reading the overview. We have 13+ years experience in circuit & PCB design, manufacture & assemble, embedded firmware & application, Mobile Apps development. We have developed many products ago using various microcontroller including STM32 serial, ESP32, Arduino, Raspberry Pi, Atmel, CPLD, FPGA, DSP,...
    Thank you for reading the overview. We have 13+ years experience in circuit & PCB design, manufacture & assemble, embedded firmware & application, Mobile Apps development. We have developed many products ago using various microcontroller including STM32 serial, ESP32, Arduino, Raspberry Pi, Atmel, CPLD, FPGA, DSP, ARM, ADuC, USB controller etc. Also, We are experienced in working with communication devices like GPS, WIFI, Bluetooth, LORA, Zigbee, GSM with MobileApps. - Product Design - Electronic Engineering - Digital & Analog Circuit Design, - PCB Design & Layout, Manufacture, Artwork - Microcontroller, Arduino, STM32, Raspberry PI, Wireless, GPS - Altium Designer, EagleCAD, Solidworks - Labview We will exceed Customer Expectations with our Superior Products and Services. less
  • Hire dongmei1993
    5.5
    36 reviews $30 USD per hour
    Hello A) I have many experiences of more than 10 years in the field of CAD/CAM/CAE by using ABAQUS, ANSYS, Auto CAD, Solid works, Creo, Inventor, Matlab, Z_Soil and ETABS. I am an expert in product design and building design in Mechanical & Architecture & Structural and Civil engineering fields. B) I'm an expert 3D...
    Hello A) I have many experiences of more than 10 years in the field of CAD/CAM/CAE by using ABAQUS, ANSYS, Auto CAD, Solid works, Creo, Inventor, Matlab, Z_Soil and ETABS. I am an expert in product design and building design in Mechanical & Architecture & Structural and Civil engineering fields. B) I'm an expert 3D modelling, 3D rendering and 3D printing for Building and various Products using archiCAD & Chief & 3Ds Max, Revit, Cinema 4D, V-ray, Blender, Sketch Up and Architecture C) I have many experiences in data entry and processing, document editing using Excel, Exel VBA, Excel Macro, PowerPoint, Google spreadsheet, Javascript, HTML and , C#. My main skills are as follows; FEA, ANSYS ABAQUS user-subroutine, Composite analysis, ETABS, Z Soil, Tekla, Fortran & Matlab SolidWorks, Auto CAD, Creo, Inventor 3D modeling/rendering/printing,Building Architecture, Interior, Exterior, Maya, 3DS MAX Excel VBA, Excel Macro, Google spreadsheet, HTML less
  • Hire trutony
    5.2
    16 reviews $30 USD per hour
    Control engineering & Power Electronics Expert, abundant experience in practical design and development of embedded systems. I controlled step motor, dc motor and different valves etc. with Motorola, Intel and PIC microcontrollers. I developed control system for ship engine and realized communication over CAN bus...
    Control engineering & Power Electronics Expert, abundant experience in practical design and development of embedded systems. I controlled step motor, dc motor and different valves etc. with Motorola, Intel and PIC microcontrollers. I developed control system for ship engine and realized communication over CAN bus between different control devices. I developed High speed and High torque control system for IPMSM(Interior Permanent Magnet Synchronous Motor). I have applied drive of LED, LCD and PWM etc. using all peripheral like GPIO, timers, UART, SPI, I2C and others of S3C2440- application processor for eLinux. -Matlab and Mathematics -Control Engineering -Power Electronics -Electrical Engineering -PLC & SCADA -Microcontroller -Embedded Software -Software Development -Algorithm -Artificial Intelligence(GA, IA, NN, Fuzzy Logic, PSO etc.) -C & C++ Programming -Electronics -Wireless less
  • Hire yongjun514
    5.5
    11 reviews $30 USD per hour
    ### Product designer, 3D modeler(Solidworks, 3d max, AutoCAD, Sketchup, Revit, etc), Mechanical engineer, Building Architect, Civil and Structure engineer, Software designer### 1. CAD/CAM, 3D modelling, Interior and Exterior Design and Rendering I have many experience product design, modelling and rendering. ...
    ### Product designer, 3D modeler(Solidworks, 3d max, AutoCAD, Sketchup, Revit, etc), Mechanical engineer, Building Architect, Civil and Structure engineer, Software designer### 1. CAD/CAM, 3D modelling, Interior and Exterior Design and Rendering I have many experience product design, modelling and rendering. I'm 3d max, ArchiCAD, Sketchup, Solidworks and AutoCAD expert. Also I'm interior and exterior design and rendering expert by Sketchup, Autodesk Revit and 3D max. 2. Mechanical engineering, Civil and Structure engineer. I'm very familiar with Mechanical engineering, Civil and Structure engineer. I will provide you creative mechanical design and product for manufacturing and printing. In particular, I have many experience ANSYS, CFD , ABAQUS, COMSOL and STAR CCM. 3. Software developer. *LabVIEW(DAQ, VirtualBench, myRIO) *C++, and matlab. I will be always with my employer. Regards. Thank you. less
  • Hire mrjadhav
    4.3
    14 reviews $15 USD per hour
    Hi, I am an Electronics engineer. I am working on Embedded system designing skills. I have studied 8051, Atmega and PIC micro-controller along with some basics of ARM controller programming. Embedded system is my most interesting field. Thus, since past 2 years I have worked on 8051, PIC and ARDUINO, raspberry pi,...
    Hi, I am an Electronics engineer. I am working on Embedded system designing skills. I have studied 8051, Atmega and PIC micro-controller along with some basics of ARM controller programming. Embedded system is my most interesting field. Thus, since past 2 years I have worked on 8051, PIC and ARDUINO, raspberry pi, orangepi. The compiler I have used are MPLAB, mikroC, Arduino IDE, Atmel studio, Keil uVision, etc. I have completed my work as programmer and circuit designer in following projects: 1) Biometric Attendence and Data Logging- uses an Arduino Mega Board, Fingerprint scanner R305, GSM SIM900 module, an RTC DS1307, an SD card (4GB) to store and read data. Data recorded with hourly time-stamp. 2) Security System for a company in Kolhapur- it is under testing phase. It gives alarm when intruder is detected, has password management. Answers only the authorized number in system. SIM900 is used to detect DTMF, send SMS, and make or receive calls. less
  • Hire elexon
    3.7
    1 review $25 USD per hour
    I am a skillful and diverse freelancer with a lot of experience in providing top quality and smooth work to all my clients. My emphasis is on delivering my task exactly as my client desires and to whom (s)he/she desires to submit it to. The following list contains my area of expertise; @Tourism and Travel @Article...
    I am a skillful and diverse freelancer with a lot of experience in providing top quality and smooth work to all my clients. My emphasis is on delivering my task exactly as my client desires and to whom (s)he/she desires to submit it to. The following list contains my area of expertise; @Tourism and Travel @Article writing @Content writing @Ghost writing @Research writing @Technical writing @Editing & Proofreading @Academic writing @Speech writing @Script writing @Statement of purpose writing @Sales pitch @Rewriting @Blog writing @Report writing @Resume writing @Press release @Newsletter @Product description @Business plan @E-book writing @Legal writing @Medical writing @Cryptocurrency/ Blockchain/ Bitcoin writing less
  • Hire sagradoamicus
    7.5
    178 reviews $40 USD per hour
    I am an Electronics and Electrical Design Engineer with the areas of expertise in Embedded System, product prototyping, PCB design and layout and firmware development for systems. I have proficiency in following software tools: 1. Altium Designer 2. Cadence ORCAD 3. KICAD 4. MATLAB 5. Mikro C (for all...
    I am an Electronics and Electrical Design Engineer with the areas of expertise in Embedded System, product prototyping, PCB design and layout and firmware development for systems. I have proficiency in following software tools: 1. Altium Designer 2. Cadence ORCAD 3. KICAD 4. MATLAB 5. Mikro C (for all controllers) 6. Arduino IDE 7. Raspberry pi 8. Eagle CAD 9. KICAD 10.Proteus Design Suite I also have experience in design of IoTs. I have almost 8 years of experience in development of products including the custom electronics. I can take your project from concept to finished product. I am also experienced in working with a number of communication devices like NFC, GPS WifI, Ethernet, Zigbee, GSM and others. less
  • Hire hmramezani
    4.6
    10 reviews $39 USD per hour
    I am a five-star freelancer with a Ph.D. degree who has completed more than 130 projects according to and beyond employers' expectations, It is more than 15 years that I am involved in programming with software including MATLAB, C, C++, Verilog, VHDL, Python and so on. Beyond that, I have worked for different...
    I am a five-star freelancer with a Ph.D. degree who has completed more than 130 projects according to and beyond employers' expectations, It is more than 15 years that I am involved in programming with software including MATLAB, C, C++, Verilog, VHDL, Python and so on. Beyond that, I have worked for different industrial companies being responsible for system modeling, simulations, design and algorithm development. From the academic perspective, I am graduated with a doctoral degree in signal processing and wireless communications from one of the best universities in the world. In addition, I have published several journal and conference papers in well-known magazines and conferences. Please contact me if you want to know more about me. I would be happy to help you with your projects. Tags: statistical signal processing, algorithms, system modeling, wireless communications, Massive MIMO, OFDM, Adaptive filters, localization, sensor networks, Cellular and LTE systems, etc. less
  • Hire hontareva2017
    3.4
    6 reviews $20 USD per hour
    Hi!, I´m a very experienced expert in the field of AutoCAD, 3D modeling and CFD. So far, I have worked on a lot of projects while working in Architecture and Design company. My experiences include the following: - Conversion from PDF(or image and sketch) to AutoCAD, - 3D Modeling and Design of buildings by using...
    Hi!, I´m a very experienced expert in the field of AutoCAD, 3D modeling and CFD. So far, I have worked on a lot of projects while working in Architecture and Design company. My experiences include the following: - Conversion from PDF(or image and sketch) to AutoCAD, - 3D Modeling and Design of buildings by using Autodesk Revit Architecture, AutoCAD, SketchUp, ArchiCAD and 3ds Max. - Civil Drafting, Structural Drafting, Mechanical Drafting, Electrical Drafting by using AutoCAD. - 3D Modeling and and Product Design by using SolidWorks, Autodesk Inventor and AutoCAD 3D. - Rendering for the exterior and interior of the building, landscape, and products by using Lumion, V-Ray. - Logo design - CFD simulation such as complex fluid and heat flow, combustion, multi-phase species transport and compressible flows, etc. -MATLAB. I would always provide you the best quality of products and the most accurate simulation results. I am looking forward to working on your project. less

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""