Electronics Engineers For Hire

  • Electronics
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

Showing 176 results
  • Hire     Mauricio768
Hire     Mauricio768

    Mauricio768 Mauricio768

    Mexico $20 USD / hour
    Electornics engineer
    Mexico
    3.8
    6 reviews 6 reviews $20 USD per hour
    Dear Clients. I am a senior Electronics with 12+years of experience. Here are some of the experiences that I built ago - Schematic and PCB Layout using Altium designer - SolidWorks Enclosure, AutoCad design - High-speed, Flexible, Multi Layer PCB design - electrical design and electronics engineering. - PLC, Motor...
    Dear Clients. I am a senior Electronics with 12+years of experience. Here are some of the experiences that I built ago - Schematic and PCB Layout using Altium designer - SolidWorks Enclosure, AutoCad design - High-speed, Flexible, Multi Layer PCB design - electrical design and electronics engineering. - PLC, Motor contral, ARM, DSP, MCUs, Arduino experience. - Arm cores: ATSAM, STM32, PIC32, A13, Freescale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Strong with UART, I2C, SPI, BLE, BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full experience for BLE HM10, HC05, ESP32, DA14580, nRF52832, 52840, BlueNRG, I am sure I can complete it on time with high quality. If you hire me, I can start to work for your job immediately. I'll do my best for you. Thank you for your time. Best regards. less
  • Hire Mauricio768
  • Hire     braincenter
Hire     braincenter

    braincenter braincenter

    Kenya $50 USD / hour
    "Quality is Not an Act it is a Habit'
    Kenya
    4.1
    6 reviews 6 reviews $50 USD per hour
    Engineering l Research writing l Computer science l Business Plans. After taking some time off to finish my second masters degree am now back with more knowledge, resources and skills to offer. The following are the services that i offer 1-Research writing: Business, Management, Sociology, Logistics,...
    Engineering l Research writing l Computer science l Business Plans. After taking some time off to finish my second masters degree am now back with more knowledge, resources and skills to offer. The following are the services that i offer 1-Research writing: Business, Management, Sociology, Logistics, Procurement, HRM, Psychology, Education, Autobiography, Finance, Accounting, Project management. 2-Engineering: Mechanical, Civil, Electrical 3-Mathematics: equations linear Algebra, Partial differential equations, Ordinary DiffEquations, Complex numbers, Engineering statistics, Business Statistics, Statistics analysis, Mathematic models 4-Software: Mathematica, MATLAB, Abaqus, Aspen plus, Java, C++, Python, SPSS, Eviews, SAS, ANSYS, Machine Learning, Android/iOS Applications, Web Development less
  • Hire braincenter
  • Hire     chandra2sekhar
Hire     chandra2sekhar

    chandra2sekhar chandra2sekhar

    India $65 USD / hour
    Embedded Hardware & Firmware, BLE, IOT Expert
    India
    7.8
    45 reviews 45 reviews $65 USD per hour
    Do you have a Electronics design & Development Job and are looking for a talented and experienced Electronics Designer? I believe that my experience and skill in this background will prove to be of great help to you. I am Dr. N Chandra Sekhar,M-tech,Phd ,Doctorate in Electronics & Embedded system.I have been...
    Do you have a Electronics design & Development Job and are looking for a talented and experienced Electronics Designer? I believe that my experience and skill in this background will prove to be of great help to you. I am Dr. N Chandra Sekhar,M-tech,Phd ,Doctorate in Electronics & Embedded system.I have been working in design & development for more than 15 years and my skills and experience will prove useful to your work . we have a in-house PCB design & fabrication Facility.I also possess proficiency in various areas like Various Microcontrollers Electronics PCB layout Circuit design Embedded Systems BLE (NRF, Silicon Labs,TI,cypress etc),BLE Mesh LTE Wifi Lora UWB positioning GPS Arduino Indoor -Outdoor Asset tracking Prototype building & many more. I am ready to start working on your job. We provide Service & Support even after completion of the projects,when ever necessary. we believe in Human relation ships than financial relation ship .Client Satisfaction is our primary goal. we are ready to give our best to give you the best :-)Thank u less
  • Hire chandra2sekhar
  • Hire     waqasfiv
Hire     waqasfiv

    waqasfiv waqasfiv

    Pakistan $10 USD / hour
    Electrical engineer who loves to do mathematics
    Pakistan
    3.1
    9 reviews 9 reviews $10 USD per hour
    Hi there! You have found a perfect match You can trust me with anything related to mathematics and electrical engineering whether it be college level or high level. My services are listed below *Assignments *Quizzes *Exams *Tutoring I have a lot of experience in getting A grades for my clients and for myself, so...
    Hi there! You have found a perfect match You can trust me with anything related to mathematics and electrical engineering whether it be college level or high level. My services are listed below *Assignments *Quizzes *Exams *Tutoring I have a lot of experience in getting A grades for my clients and for myself, so don't hesitate and hire me. You will get 100% grade guarantee and I'll make sure you get what you need. Your satisfaction is what I need! less
  • Hire waqasfiv
  • Hire     mos3d
Hire     mos3d

    mos3d mos3d

    Egypt $25 USD / hour
    R&D Electronics Engineer ( Master Degree ✅ )
    Egypt
    6.3
    50 reviews 50 reviews $25 USD per hour
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes...
    With over 6 years of experience under my belt , i am the PERFECT contractor for your project. if you're looking for high quality work from a person specialist in embedded systems , hardware prototyping , Robotics and digital design , then i am the person you need to work with. My field of professionalism includes : 1-Micro-controllers with variant types like (Pic ,ARM, AVR , 8051) 2- development kits (Arduino, Mbed,Raspberry pi ) 3- Digtal design and Verification using (VHDL, Verilog and system Verilog) 4-FPGA prototyping using (Xillinx and Altera) FPGAs as well as 5-electronics hardware implementation 6-PCB design. 7- Programming languages: Python, C/C++, JavaScript, HTML, CSS. 8- Sensing : Wired(I2C, SPI, CAN, Modbus, MQTT, RS232/485, SNMP), Wireless(WiFi, BLE, RF, Xbee) sensor managements with Raspberry Pi/Arduino. I'm always committed with time and specifications for the required jobs and care about quality of delivered work less
  • Hire mos3d
  • Hire     tregor1990
Hire     tregor1990

    tregor1990 tregor1990

    Russian Federation $30 USD / hour
    Senior Electronic Engineering/Designer
    Russian Federation
    2.9
    1 review 1 review $30 USD per hour
    I have been working for more than 5+ Year in the field of PCB designing and layout, firmware programming, and rapid prototyping. I have the energy and wisdom to design products for today’s technical challenges. Here is a non-exhaustive list of software skills and chipset familiarity: - Strong C++, C, and C# - PCB...
    I have been working for more than 5+ Year in the field of PCB designing and layout, firmware programming, and rapid prototyping. I have the energy and wisdom to design products for today’s technical challenges. Here is a non-exhaustive list of software skills and chipset familiarity: - Strong C++, C, and C# - PCB layout and schematic capture with Altium, Kicad, Orcad, Cadence, Eagle, etc., with multilayer, flexible, high-speed embedded systems - FPGA programming with Verilog/VHDL: Altera Quartus, Xilinx, iCECube - Experience with low-cost MCU/single-board prototyping platforms: Arduino, Beaglebone, Raspberry Pi, NanoPi, etc. - ARM: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP - MPU: Pic33F/18F/16F, Atmega 80251, 8052, 8951, 8051, 16, 32, 128 - Digital interfaces and wireless transmission: UART, I2C, SPI, BLE, BT, GSM/GPRS/GPS, xBee, ZigBee (particular experience with BLE HM10, HC05, ESP32, DA14508, nRF52832, 52840, BlueNRG) Since then I've offered my services to help big and small businesses solve the hardware and firmware problems they face. Look through my portfolio, and feel free to ask how my experience can help you solve your problems. From an idea, to requirements, prototypes, proof of concept, and finally production. You can expect a professional design, every time. I won't take a job I cannot confidently finish. Best regards less
  • Hire tregor1990
  • Hire     binyameen441
Hire     binyameen441

    binyameen441 binyameen441

    Pakistan $12 USD / hour
    Electrical Engineer, Professional Writer......
    Pakistan
    5.7
    63 reviews 63 reviews $12 USD per hour
    I am an Electrical Engineer. I am expert in 1) Arduino/ Microcontroller 2) Matlab/Simulink 3) Wireless Technologies (BLE, WiFi, RF, GSM, GPS, ESP32/ESP8266, nRF51, nRF52) 4) Mobile App Development( IOS, Android) 5) Pspice/proteus/multism/pscad 6) Embedded & IOT Devices 7) ...
    I am an Electrical Engineer. I am expert in 1) Arduino/ Microcontroller 2) Matlab/Simulink 3) Wireless Technologies (BLE, WiFi, RF, GSM, GPS, ESP32/ESP8266, nRF51, nRF52) 4) Mobile App Development( IOS, Android) 5) Pspice/proteus/multism/pscad 6) Embedded & IOT Devices 7) Electronics/ PCB design( Altium, Eagle, Proteus) 8) C++/C/Java/Python/php 8) Hfss/ PLC/ ltspice/Labview 10) Autocad/ 3D design/CAD 11) Robotics 12) Mathematics/Digital electronics/Circuit design 13) Verilog/VHDL/FPGA I am also a talented and experienced writer. Writing is more than a passion to me. I am providing the best quality services at a reasonable budget. I am expert in 1) Report writing 2) research writing 3) Articles writing 4) Technical writing 5) content writing 6) academic writing 7) Literature review 8) Blogs 9) Resume Writing & Cover Letter 10) Product Descriptions , Data Entry and Excel work 11) Ghost writing I can also do Wireless , Networking ,Cisco, Chemical Engineering, Material Engineering,Civil Engineering Research and Report writing 100% guaranteed plagiarism free work. So please reach out to me so that we can discuss your project in greater detail! less
  • Hire binyameen441
  • Hire     tronictitan
Hire     tronictitan

    tronictitan tronictitan

    India $20 USD / hour
    Electronics engineer
    India
    2.8
    4 reviews 4 reviews $20 USD per hour
    Hello, thank you for swinging by! I am an enthusiastic designer with expertise in circuit design, schematic entry , PnR , PCB assembly , firmware design and bringup. I am a masters holder in electronic design from Indian Institute of Science. ->10 years experience in electronics design ->Experience in Xilinx...
    Hello, thank you for swinging by! I am an enthusiastic designer with expertise in circuit design, schematic entry , PnR , PCB assembly , firmware design and bringup. I am a masters holder in electronic design from Indian Institute of Science. ->10 years experience in electronics design ->Experience in Xilinx Spartan & Virtex FPGA *Both Verilog and complete PCB design including DDR3 ->Hands on experience with TI’s ADC, DAC, amplifiers and power converters ->Hands on experience in NXP LPC series MCU’s *Designed and developed PCB’s with LPC 2148, LPC1788 & LPC1768 MCU’s ->Implemented firmware using Segger PRO tool chain for ARM 4-year experience in PCB debug and system debug in Nvidia Corp 3-year experience in hardware testing in Qualcomm Inc My expertise include Feasibility study & specifications formulation Block diagram design of functional blocks Complete circuit design Analog circuit design Application specific amplifiers, filters & signal conditioners Mixed signal devices like ADC’s and DAC’s Simulation for critical schematics Digital circuit design Micro controller (ARM) & FPGA based designs System power supply design Complete power supply design to meet the system requirements Component selection and BOM optimization Tradeoff between cost and performance Place & Route up-to 10 layers, BGA & via in pad designs using PCB Editor SI analysis for high speed interconnects (DDR, USB etc) using PCB Editor PCB 3D mechanical model using Fusion 360 Complete manufacturing files generation Complete PCB assembly PCB bring up Firmware development for ARM MCU’s with Segger PRO tools Basic Verilog development for Xilinx FPGA’s Tools: Cadence OrCAD Segger embedded studio Pro Fusion 360 Please ping me if you need help in any topic related to electronics ! less
  • Hire tronictitan
  • Hire     engrhumza
Hire     engrhumza

    engrhumza engrhumza

    Pakistan $25 USD / hour
    PCB Designer for Altium,Eagle,Kicad,Orcad and Pads
    Pakistan
    6.0
    51 reviews 51 reviews $25 USD per hour
    I have 8 years of experience in PCB Designing, Hardware Designing, and component sourcing. My key expertises are high-speed routing, differential routing, and RF track routing.I have designed up to 12 layer PCB. I am an expert with the following EDA tools. Altium designer. Eagle Mentor Pads. P-CAD...
    I have 8 years of experience in PCB Designing, Hardware Designing, and component sourcing. My key expertises are high-speed routing, differential routing, and RF track routing.I have designed up to 12 layer PCB. I am an expert with the following EDA tools. Altium designer. Eagle Mentor Pads. P-CAD (PCAD2004). Orcad Allegro. Design Spark KICAD Fritzing Multisim , DIPtrace and Target3001 less
  • Hire engrhumza
  • Hire     EinsteinWorks
Hire     EinsteinWorks

    EinsteinWorks EinsteinWorks

    India $30 USD / hour
    Pursuing Phd in Power Electronics
    India
    5.1
    15 reviews 15 reviews $30 USD per hour
    Pursuing PhD in Power Electronics with several years of industrial experience in power electronics and power system R&D. Experience in GATE coaching for more than three years. Expert in: MATLAB/Simulink, PSCAD, Logisim, PowerWorld. Micro-Cap , LTspice, Multisim, PSIM, KiCad, SIMetrix/SIMPLIS. FEMM
    Pursuing PhD in Power Electronics with several years of industrial experience in power electronics and power system R&D. Experience in GATE coaching for more than three years. Expert in: MATLAB/Simulink, PSCAD, Logisim, PowerWorld. Micro-Cap , LTspice, Multisim, PSIM, KiCad, SIMetrix/SIMPLIS. FEMM less
  • Hire EinsteinWorks

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""