PLC & SCADA Programmers For Hire

  • PLC & SCADA
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

  • Hire sky19130
    1.1
    1 review $15 USD per hour
    An innovative, creative and analytical person that enjoys to acquire new knowledge and experience and to work with challenging tasks. Good at working independently and also as a part of a competent and stimulating team. I have 8+ years experience in electronics & circuit design, PCB Layout, manufacturing,...
    An innovative, creative and analytical person that enjoys to acquire new knowledge and experience and to work with challenging tasks. Good at working independently and also as a part of a competent and stimulating team. I have 8+ years experience in electronics & circuit design, PCB Layout, manufacturing, wireless, embedded system. In these yerars, I have developed many products using various microcontroller including STM32 serial, Arduino, Raspberry Pi, Atmel, CPLD, FPGA, DSP, ARM, ADuC, USB controller etc. I am experienced in working with communication devices like WIFI, Bluetooth, Zigbee,...... etc. -Development Tools & Application Altium Designer, KICAD, EAGLE,NI Multisim, OrCAD, ADS, HFSS, MATLAB, Quartus, CCS,Atmel studio, Micro C,MPLAB. AutoCAD, Solidworks. I will always be to meet your requirements. Best Regards! less
  • Hire MahmoodIsmael
    1.5
    1 review $20 USD per hour
    I'm a full-time senior network engineer since 2012 who have great experience in Cisco and HP Networking. I hold the following titles: * Senior Network Engineer * Wireless Communications Engineer * Data Password Recovery Expert * MS Excel Expert * MS Visio Expert * Arabic-English Translator Have a look at my...
    I'm a full-time senior network engineer since 2012 who have great experience in Cisco and HP Networking. I hold the following titles: * Senior Network Engineer * Wireless Communications Engineer * Data Password Recovery Expert * MS Excel Expert * MS Visio Expert * Arabic-English Translator Have a look at my portfolio. It contains real case projects. less
  • Hire gustavodaboin
    3.0
    2 reviews $30 USD per hour
    I studied at a prestigious university in the country coming to the end of the race and specializing in the areas of control, automation, electronics and communications and have by now a professional experience of more than 12 years working on everything related to the design and development of electronic projects and...
    I studied at a prestigious university in the country coming to the end of the race and specializing in the areas of control, automation, electronics and communications and have by now a professional experience of more than 12 years working on everything related to the design and development of electronic projects and IoT. I have had the opportunity to develop more complex projects than anyone can imagine. Firmware for several microcontroller *PIC microcontrollers, Atmel avr, Freescale motorola, arm, arduino, DSPs. *Analog and digital electronics, sensors, actuators, transducer, motors, display, keyboards, memory, etc. *I have skills in wireless and wireline communication, protocol management, wifi, rfm, bluetooth, Xbee, gps, modem, nodemcu, serial rs232, rs485, i2c, spi, etc. Design (schematic design and art for the manufacture of cards). *I do pcb board designs with gerber and bom files, I work with various design software and work up to 8 layers if required... less
  • Hire vw2082690vw
    2.6
    1 review $25 USD per hour
    Mechanical engineering team Hi, We are engineers and we have Mechanical than 10 years of experience in various fields of industry graphic design, cad 2d, 3d models, molds, plastics and CAM programming. We have a company and we have a creative approach to each project, and the result is always the best. We believe that...
    Mechanical engineering team Hi, We are engineers and we have Mechanical than 10 years of experience in various fields of industry graphic design, cad 2d, 3d models, molds, plastics and CAM programming. We have a company and we have a creative approach to each project, and the result is always the best. We believe that proper communication and honesty is the key to achieving the desired results in any project. We give customers reasonable prices and high quality products. We use most of the CAD/CAM Software such as AutoCAD, Inventor, Catia, Solidworks, Mastercam, Vericut, nx ... Provide industrial design services such as: - Design sheet metal - 3D Models - Technical drawings - FEA analysis and simulation - Structural welded structure - Prototype Development - Reverse Engineering - Drawing & Joint Assembly - Mechanical systems - 3D printing Design - Design molds, tooling design - Programming on CATIA CAM, Mastercam, Vericut, nx ... Point of view : High quality and fit budget ! less
  • Hire Yefimchenko
    2.7
    3 reviews $15 USD per hour
    Engineer of automated control systems of technological processes for 8 years. Develop systems of control of technological processes in the food industry, energy and others. Work with PLC Siemens, Schneider electric, GE Fanuc, Allen Bradley, Unitronics and others. Also use software Step7, TIAPortal, RS Logix and other....
    Engineer of automated control systems of technological processes for 8 years. Develop systems of control of technological processes in the food industry, energy and others. Work with PLC Siemens, Schneider electric, GE Fanuc, Allen Bradley, Unitronics and others. Also use software Step7, TIAPortal, RS Logix and other. My credo is quality, efficiency, affordable price. less
  • Hire sukhoi1
    2.2
    1 review $25 USD per hour
    High quality Еmbedded and PLC/HMI/SCADA team from EUROPE! I'm Senior Embedded engineer with 10+ years experience and Senior Automation engineer with 5+ years experience. I worked in Olimex (www olimex com) like hardware designer for 3 years and have more than 200 professional designs sold over the world. Our...
    High quality Еmbedded and PLC/HMI/SCADA team from EUROPE! I'm Senior Embedded engineer with 10+ years experience and Senior Automation engineer with 5+ years experience. I worked in Olimex (www olimex com) like hardware designer for 3 years and have more than 200 professional designs sold over the world. Our team designs final devices - hardware and software. We are one of the first with ESP32 Wroom projects and we are guru in this! We also have 2 succesfull projects with complex A20 Linux custom boards. Senior Knowledge in: IoT, esp32 Wroom, esp8266, A20, A13, А10, pic32, pic18, FPGA, Https servers, Embedded Web servers, cpu1200 - Siemens automation - PLC (cpu315, cpu 1200) and HMI (Comfort Panels) - Lenze automation - PLC( controller 3200C) and HMI( p300) We know exact processor that is needed for your application! less
  • Hire Manux25
    1.2
    1 review $8 USD per hour
    I'm Mechatronic Engineer and Programmer especialized in Industrial Automation with ample experience in development of embedded systems, firmware development,software development (Java 8), App development and back-end development (PHP). Automotion (2+ years) - automation and optimization of processes. -...
    I'm Mechatronic Engineer and Programmer especialized in Industrial Automation with ample experience in development of embedded systems, firmware development,software development (Java 8), App development and back-end development (PHP). Automotion (2+ years) - automation and optimization of processes. - Installation, Programming and Commissioning of PLCs and Touchscreen HMI(Siemens, Allen Bradley, Schneider, Do-More). - Installation, Programming and Commissioning of AFD (Siemens & Schneider). - Operator and Programmer of Robot KUKA with control unit KRC4. Electronic (6+ years) - Programming of Microcontrollers and Boards: PIC, ATMEL, Arduino, ESP8266, Raspberry Pi, Teensy. - Development of Embedded Systems with Microcontrollers. - Design of PCB and Layout. - Development of projects and products IoTs. Developer Java - Java 8 Desktop (3+ years). - Java 8 Web (1 year+). - Spring Boot (1 year+). - Microservices (1 year+). - AWS Lambda (1 year+). - Alexa Skill Kit (1 year+). less
  • Hire mechatronicsengr
    2.8
    2 reviews $25 USD per hour
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory...
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory Automation and Remote Inventory Management. - RFID Based Loyal Card for Loyal Customers. - Bluetooth Communication between MCU and RFID Host. - Vehicle Tracking using GPS and Accelerometer. and a lot more. I have expertise over all communication protocols of Microcontroller: - SPI (Master/Slave) - UART - USART - I2C (Master/Slave). - Ethernet - Wifi - Bluetooth etc.. I am expert in interfacing sensor modules with microcontroller. I believe in providing superb quality provided that the deadlines are met. Moreover, during the course of my project I would keep you updated regarding the status. Service Description: * Wireless Interfaces (ISM Band FSK, OOK, XBee, ZigBee, TI 2.4GHz, Bluetooth, WiFi, etc) * LED lighting control * DC Motor Control and Actuator Control Solutions * Touch Sense * RF Energy Detection Systems * Home Automation systems * Weather Stations (Temperature, Pressure, Humidity, Wind Speed, Positioning, and Ambient Light sensing) * GPS Tracking Systems * USB Based Embedded Products * Power Over Ethernet (POE) Solution * On Board / off board DC/DC Low quiescent current, Linear and Switch Mode Power Supply solutions for embedded applications ----------------------------------------------------- * PCB Design (Printed Circuit Board) * Schematics and Bill of Material * Block Diagram and Design Documentation * Suggesting you PCB and PCBA vendors or managing the PCB and PCBA process. * Part Selection, Parts Sourcing * Manufacturing File generation * High Speed, High Density Multi-Layer PCB Layout * Embedded Software / Firmware design development * 3D Step Models of the PCB for Integration with MCAD tools. * Board Bring-up: Test codes in C/C++. * DSP Design (Digital Signal Processing) * Power / Signal Integrity Analysis * System / Hardware Design -------------------------------- * Circuit Simulation Training using Altium, MultiSim and Proteus * Embedded Firmware Design Training (C/C++, Assembly) * Schematics and PCB Design training less
  • Hire websat13
    1.4
    1 review $20 USD per hour
    hello everybody i have now over 1 year working at a freelancer, and i have also 10 years experience in developing embedded systems. i have skills in general electronics, PCB design (altium designer and eagle cad), simulation software (Proteus), Programming Software (Keil C51, C166, MikroC (PIC, 8051, AVR), MPLAB...
    hello everybody i have now over 1 year working at a freelancer, and i have also 10 years experience in developing embedded systems. i have skills in general electronics, PCB design (altium designer and eagle cad), simulation software (Proteus), Programming Software (Keil C51, C166, MikroC (PIC, 8051, AVR), MPLAB (C18,10F,12F, 16F), Code Vision AVR, Hitech (PIC, AVR) andWinAVR.). i have also skills in differents kinds of microcontrollers programming (Microchip,Avr,Stm,Arduino) and communication systems (Bluetooth, Wifi,zigbee). i have made a lot of projects and all the employers i have had are satisfied. so i am ready to go at any time . less

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""