3d printer model jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    3,385 3d printer model jobs found, pricing in USD

    Simple app that will all you to enter data and when the data is entered a random number is printer from an epson TM-T88iii printer. I have a webapp prototype which I need to make for iOS.

    $431 (Avg Bid)
    $431 Avg Bid
    23 bids

    Custom 3D printer slicer needed for a special project.

    $6968 (Avg Bid)
    $6968 Avg Bid
    17 bids

    The requirement is that we need a custom printer driver that users can install on their Windows computer. When the user prints a document, the document is not sent to a hardware printer, instead, it is sent over API to a system. The challenge however, is that the printer dialog needs to be completely customized to our needs. Therefore, it probably

    $1446 (Avg Bid)
    $1446 Avg Bid
    8 bids

    ...Hi Res Models for 3D printing test I just bought a XYZprinting Nobel 1.0 Stereolithography 3D Printer. I want to test is printing accuracy. I need 5 different Hi Res 3d models. Details:- 1) Files should be delivered is both STL and OBJ format. 2) All models should be of different type. Like figurine, toy, tools, art etc. 3) Model should have I details

    $86 (Avg Bid)
    $86 Avg Bid
    6 bids
    Portable heater 5 days left
    VERIFIED

    I need a 3D model of something. Hi all freelancer i am looking for someone who could come up with a 3d desigh and must provide all the achtectual plans flans for the product with exact measurments on the plans in mm. The 3d design is for a portable heater that contains two materials ceramica where the nicromw coil will be, and plastic for the main

    $150 (Avg Bid)
    $150 Avg Bid
    29 bids

    I need an expert who have the knowledge of server and networking and also little bit about programming.. I need someone to connect a thermal printer with my server.

    $26 (Avg Bid)
    $26 Avg Bid
    7 bids

    We are a online sales team which fix the common printer issues online and pitch for sales. So we need a windows printer fixing software like (HP Printer & Scan Doctor) which pretend that it is scanning and fixing the printer issues but at the end of scan just highlights some common issues to be fixed by the user. This software will be used to help in

    $170 (Avg Bid)
    $170 Avg Bid
    10 bids

    3D Model a checker piece to be 3D printed on an SLA (Resin) Printer with high precision. The piece is approximately 30mm x 7mm. The checker piece will have a hollowed out center (according to dimensions given later but is not complicated). A design with minimal support is best. The checker piece will be stackable, as are normal checkers. A simple logo

    $205 (Avg Bid)
    Featured Guaranteed Top Contest
    $205
    32 entries

    We are using a printer that is connected via WAN. It has a unique IP address and communicates via UDP-packets. We don't know details, just have the protocol of the network traffic. We would like to have a windows software that provides the following functions: - it checks the status of the printer once every 30 seconds and changes his program icon

    $264 (Avg Bid)
    $264 Avg Bid
    10 bids

    We have current project develop Point of sales with front end and back end front end is POS to taking order....dashboard, product, user, outlet setting, promotion setting, accounting, inventory and report etc then now we need create Printer management to make the printer able to print for order kitchen/bar printer and bill receipt to cashier printer.

    $716 (Avg Bid)
    $716 Avg Bid
    33 bids

    ...would like to instal my Canon Pixma IP1800. Ubuntu discovers the printer, tries to install it and asks for extra software. The job consists in connecting with TeamViewer on my Ubuntu and assisting me in installing the Canon Pixma IP1800 printer. Second step would be to make the printer accessible to the network so Mac's and PC's can print on it. Third

    $22 (Avg Bid)
    $22 Avg Bid
    4 bids

    I'm looking a light software to run on windows based Point of Sales (POS). The goal of this software is to store all the printed receipts as PDF/JPG and not interrupting ...on windows based Point of Sales (POS). The goal of this software is to store all the printed receipts as PDF/JPG and not interrupting the print of receipt through physical printer.

    $502 (Avg Bid)
    $502 Avg Bid
    11 bids

    Create a HTML code for shopify order printer invoices and packing slips. Custom HTML text required for images and some simple margin changes for shopify order printer app. Can provide details and requirements over message. Basically looking for small margins and reduced font sizing in the template as well as our logo. Thank you.

    $17 (Avg Bid)
    $17 Avg Bid
    23 bids

    You MUST own a Star Micronics SP700 printer. We will not be buying it for you. You MUST have coded in Ionic/JavaScript and worked with Star Micronics SDK before. We need help printing tags from our point of sale. Thank you!

    $205 (Avg Bid)
    $205 Avg Bid
    2 bids

    Hi , I am working on a Project to build a machine with Software ( C#,Microcontrollers..) for Printing Data on PVC Card Printer with different Methodes like ( MagStripe Coding-Encoding, Chip Coding contactless/contactbased. ...Printing on Thermotransfer, Mechanical Embossing) Details of the Project will be shared after we agreed . BR TG

    $3243 (Avg Bid)
    $3243 Avg Bid
    27 bids

    I own a XYZprinting Da Vinci 1.0 Pro 3d Printer. I want to print a lifesize statue of a Pitbull. (in pieces and glue them together) What i need is a 3d Model for printing cut down into pieces to assable the Dog. Check [login to view URL] i want the pibull with natural ears mouth a bit

    $139 (Avg Bid)
    $139 Avg Bid
    22 bids

    Hello 3D modelers, I’m a hobbyist creating 3D printed animal dioramas. I search for someone who can create high poly 3D animals. I do it by myself too in ZBrush, but I’ve no time to create all the models I want, so I’m looking for someone who can create models in the same realistic style and that quality (or even a bit better). I’ve a long wishlist

    $150 (Avg Bid)
    $150 Avg Bid
    29 bids

    Im looking for a person that has experience in 3d printing. I have a number of 3d object files that i need custom supports built so that the resin won't get stuck on the base. right now my prints are getting over flow of resin in certain areas. You will need to modify the object so that the supports dont effect the over all print and you must be able

    $156 (Avg Bid)
    $156 Avg Bid
    17 bids

    Develop a Printer Driver that would call a RESTFul Service and send the binary data that is being printed along with some other metadata.

    $143 (Avg Bid)
    $143 Avg Bid
    4 bids

    Im looking for a person that has experience in 3d printing. I have a number of 3d object files that i need custom supports built so that the resin won't get stuck on the base. right now my prints are getting over flow of resin in certain areas. You will need to modify the object so that the supports dont effect the over all print and you must be able

    $132 (Avg Bid)
    $132 Avg Bid
    21 bids

    Hiya Freelancers! I've uploaded a few logos, I need help converting them into a 3D printable "keychain", of sorts. I can provide any type of file necessary (illustrator file, etc), just need them turned into a keychain for printing. I have experience with 3D printing, just not really sure how to turn vectors into editable objects yet. Choose which

    $98 (Avg Bid)
    $98 Avg Bid
    10 bids

    I have a mobile app running on iOS (via Safari) that's been written in Zoho Creator. I need to be able to print a receipt via my app using a Star thermal printer. I cannot get this part to work. I believe I need to integrate the Star SDK into my ZC app, but I have little experience in this. So I am basically looking for the ZC code I would need

    $583 (Avg Bid)
    $583 Avg Bid
    2 bids

    ...ESC / POS printers. In input an XML document and it is to print the rendering on the printer. The projects on npm already allowing to realize this kind of functions: - [login to view URL] - [login to view URL] The problem is the management of the tables, we want for example to be able to write

    $625 (Avg Bid)
    $625 Avg Bid
    23 bids

    I need a 3D model (stl) of this danzig belt buckle (see pics). It should be printable on a 3D printer.

    $56 (Avg Bid)
    $56 Avg Bid
    32 bids

    Write a C# windows form app. to print Arabic receipt on POS printer. I have Marvel AF25080, which is compatible with EPSON TM-T88III. my requirements: 1- the receipt shall have a logo printed first. 2- bold text centered for the title 3-table for the bill items in Arabic, like: اسم المنتج الكمية السعر الأجمالي Item Desc. Quantity Price Amount

    $22 (Avg Bid)
    $22 Avg Bid
    4 bids

    We have current project develop Point of sales with front end and back end front end is POS to taking order. and bac...dashboard, product, user, outlet setting, promotion setting, accounting, inventory and report etc then now we need create Printer management to make the printer able to print for order kitchen/bar and bill receipt to cashier printer.

    $206 (Avg Bid)
    $206 Avg Bid
    19 bids

    We need a person who will develop an "agent" for windows and linux/raspberry Pi running either on a computer or USB pen drive to capture all (public and private) printer MIB data via SNMP. This agent will act as a service so whenever computer starts or the USB is connected to a computer, agent also starts. The Network range, polling time, discovery

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    6 bids

    Drawing and dimensions for small device made from plastic. This device will be placed in urinals and workers will urinate in the top of it. Urine colour will be assessed behind clear screen and drain away through holes in the bottom. A temperature sensitive sticker will be placed at the top to record urine temperature.

    $65 (Avg Bid)
    $65 Avg Bid
    32 bids

    i need an Odoo Developer to connect the Odoo POS Reciept printing function over to my Native Android thermal Printer. Printer network connection : Bluetooth The printer is compatible with the ESC&POS instruction, but is slightly different from the standard ESC&POS instruction. I'll provide the instruction to configure it.

    $19 (Avg Bid)
    $19 Avg Bid
    3 bids

    i have already all working script in php and javascript but i need help with google cloud print, im trying to print from thermal printer, and i have issued with margins, , then problem is that went i print smalll pc of invoice, it priont a lot pcs of paper on the bottom

    $108 (Avg Bid)
    $108 Avg Bid
    8 bids

    I am Designing a 3D printer for Jewellery castable prototypes. This printer will be able to print a 3D design in a photopolymer resin. For This project I have decided to use a DLP LIghtcrafter 6500EVM , steper motor for Z-axis ,Touch screen , and DRV88825 control ic along with the Aurdino [login to view URL] Lightcrafter 6500EVM has to be modified for

    $2148 (Avg Bid)
    $2148 Avg Bid
    5 bids

    ...right & allow me to edit 1. Domain NameUserName 2. Printer Driver 3. Printer Name 4. Printer IP Address The script must also include the followings when it runs 5. If same IP address found, use an existing port 6. Replace the current driver detected by Windows 7. Do not share this printer 8. Message prompt after installation completed * Must

    $21 (Avg Bid)
    $21 Avg Bid
    1 bids

    Hi, Im looking for some software to I can run on my windows 7 system to overrides the low ink warning on my printer . The software is called PTPublisher. First a windows pop's up saying the ink is empty. I press the button on the printer & the message removes Then it loads then a box pop's up saying ink low gain So this time I have to press

    $167 (Avg Bid)
    $167 Avg Bid
    5 bids

    I would like to h...hire on an individual who has the expertise to create a two part 3d model of the attached file. Both parts of the mould should fit together using the outlined matching points as well as be to the scale specified. The intention would be to print the finished model by way of a 3d printer. Thanks for your time and consideration.

    $146 (Avg Bid)
    $146 Avg Bid
    95 bids

    ...somewhere along the line the filament stops extruding and the print fails. The printer will continue to make print motions but no filament.. I have tried everything from re leveling my bed to adjusting slicer settings , etc. At this point I am looking for someone to calibrate my printer so I can produce consistent quality prints and also teach me how to calibrate

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    16 bids

    I'm looking for someone who is able to create a 3d model caps (see picture) that I will be able to print on my 3d printer (Tevo Tarantula). It's for my old car, for personal use. Need an exact replica high quality. Just the top to create, the back can be flat.

    $24 (Avg Bid)
    $24 Avg Bid
    8 bids

    I'm looking a light software to run on windows based Point of Sales (POS). The goal of this software is to store all the printed receipts as PS/PDF and not interrupting th...on windows based Point of Sales (POS). The goal of this software is to store all the printed receipts as PS/PDF and not interrupting the print of receipt through physical printer.

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    28 bids

    I imagine that you're reading lots of projects, so I'll keep this short and sweet. I need someone to extend the functionality for my current Windows 7 Point-of-sale (POS) application. My current POS system has built-in calculations for certain fees and taxes my business is obligated to pay, but I cannot change the taxes and fees which operate these calculations. As these fees are subjec...

    $163 (Avg Bid)
    $163 Avg Bid
    18 bids

    I'm looking for 3d printer expert for make some model and prepare a Gcode or print . The Gcode will be for 20cmx20cmX20cm 3d print , and the model will be cut in a way for eliminate any kind of support .

    $43 (Avg Bid)
    $43 Avg Bid
    35 bids

    Build an Saleforce App which outputs data as email. Then Integrated with a GPRS or WIFI printer such as Goodcom GT5000S GPRS SMS WIFI Printer to retrieve data as POP3/Customize the printer firmware. The salesforce App will connect to a database with multiple restaurants/takeaways profiles and also allow admin to upload Menu items, which then can be

    $1200 (Avg Bid)
    $1200 Avg Bid
    35 bids

    ...6970" printer. I'm going to build a software that sends following info by email: • Unique printer identifier (s/n) • Date & time of print job • Quantity of pages printed in print job • Type of pages printed i.e. black or coloured • % full status for each ink cartridge installed I'm sure that there is a dll file for those info in ...

    $525 (Avg Bid)
    $525 Avg Bid
    10 bids

    Need Someone To Help Me Fix My Printer

    $42 (Avg Bid)
    Local
    $42 Avg Bid
    2 bids

    I want to print a 3D model for my architecture diploma. I created the model with SketchUp, but when importing to Netfabb there are a lot of errors, so it cannot be printed with the 3D printer. I am looking for someone to find out what's wrong with my model and repair it.

    $62 (Avg Bid)
    $62 Avg Bid
    37 bids

    Hi, I 'm looking for a solution that will print from Google Chrome web browser to a Zebra Thermal Printer. Labels I print on: [login to view URL] Document is printed on Total Width: 3.25" Individual Label Dimensions: 1.5" x 1" Gap: 0.125" (0.125" across) Corner Radius: 0.125" Perforations: Yes (Between labels) Top

    $208 (Avg Bid)
    $208 Avg Bid
    8 bids

    Hello everyone I have a Canon Selphy CP1200 Wifi Printer and I'm using Canon PRINT Inkjet/SELPHY app to print The problem is that when I send an image to print - I can't close the app till it finishes printing otherwise the print is stopped in the middle I'm looking for a developer that will develop an app to my android (4.2.2 and higher) that I can

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    I am developing a DLP 3D printer. Lot of DLP 3D printer available in market but with my experience i like to produce with reliability, accuracy, Convinent & open source.

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    8 bids

    I want to hire somebody with excellent modeling talent to help me build a DNF character. Detail will be send to the winner. Please only bi...somebody with excellent modeling talent to help me build a DNF character. Detail will be send to the winner. Please only bid if you can make it with every detail, cause the model will be used to print for real.

    $453 (Avg Bid)
    $453 Avg Bid
    35 bids

    Attached the PDF format and our logo and side bar Company name [login to view URL] File will be generated by PHP code and images will be public on site. One sheet (code will geenrate multiples) As images for activities we would like: Tennis Swimming Horse riding Golf Guitar lesson English Lesson Cooking lesson Nature outing (walk along a canal) Canal canoeing As images for half day excursions:...

    $27 (Avg Bid)
    $27 Avg Bid
    18 bids

    This project got deleted or something, sorry. I have 1 wired printer for use with 3 windows 10 pc's. All pc's are wired (ethernet). Need to get this printer setup where it will work for all pc's. No generic proposals please. Thanks.

    $31 (Avg Bid)
    $31 Avg Bid
    7 bids

    ...print receipts from this website to a Bluetooth thermal printer on a mobile phone Andriod and/or Iphone. I have been able to send the website to a thermal printer application and get it to print. However I am hoping there is a way for me to print from my website directly to the thermal printer. The freelancer must provide me different options if

    $82 (Avg Bid)
    $82 Avg Bid
    5 bids