Analog elctronics jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    3,332 analog elctronics jobs found, pricing in USD

    Project is with pic18f87j60, we use ethernet, uart1, 4 analog inputs.

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    1 bids

    Project 051619 Definition: Simple P or PI control of a pneu...Maintain cycle count for each successful movement command. Monitor one thermal temp sensor and compare to max setpoint, effect program stop if excessive temp. Monitor and record analog angle sensor at various input events. Record rotation times each direction, store last data in registers.

    $729 (Avg Bid)
    $729 Avg Bid
    7 bids

    I would like to do a spectrum analyzer based on Arduino. However a bit confused about how to use FFT to get the frequency and magnitude of the analog signal collected by a sound sensor into an array for display on an 8x8 led matrix.

    $55 (Avg Bid)
    $55 Avg Bid
    3 bids

    Required USB token based digital signature implementation for document sign...digital time measurement sensor, adding signature word document, flash based digital counter, token based ecommerce, sign signature word document, digital circuit implementation analog fpga, php digital signature html forms, freelancer required find indian based manufacturer

    $258 (Avg Bid)
    $258 Avg Bid
    6 bids

    Analog signal path design

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    1 bids

    using microcontroller programming we need to design a PC based interface module and electronic board to count pulses and give output based on the frequency of the input signals.

    $112 (Avg Bid)
    $112 Avg Bid
    10 bids

    Need to develop a logo for a Exhibition/tradeshow called Engarde. it is a celebration of analog gaming with a focus on Miniature gaming, Tabletop games including collectable card games and roleplaying games. Logo needs to be contemporary and stylish

    $44 (Avg Bid)
    $44 Avg Bid
    32 bids

    ...workflow here is the possible call flow: Note: I am assuming that my customers and its contact are already saved in DB somewhere. step 1: my call center employee pick the analog phone up step 2 : he is greeted with a message and then is asked to enter the customer id step 3: the employee enter a customer id ( numerical, 4-5 digit) like a IVR step

    $1042 (Avg Bid)
    $1042 Avg Bid
    8 bids

    0-5Vdc input linear output which needs to be converted to 5-0-5Vdc (V curve) . Auxilary in...linear output which needs to be converted to 5-0-5Vdc (V curve) . Auxilary input 5Vdc to circuit price is important hence we prefer PWM output from MCU and by RC filter to analog output. All above in minimum 10 bit and maximum 12bit resolution. Response 200 Hz

    $110 (Avg Bid)
    $110 Avg Bid
    6 bids

    Porting over a older project from IDE 8 on PIC24E to Harmony 2 on PIC32MZ with FreeRTOS. Need ongoing help to develop drivers that will work in FreeRTOS for i2c, SPI, analog, webpage, UART, and a number of special protocols. This is ongoing, so milestone will be continually be created.

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    7 bids

    - check the picture in annex first Product search for interval timer: This digital timer has a display with small numeric display but the main display imitates an analog clock similar to a clock hand. This interval timer is mostly used in boxing gyms, so a full turn of the clock hand is four minutes. (3 minutes boxing match, 1 minute break) The manufacturer

    $27 (Avg Bid)
    Top Contest
    $27
    4 entries

    ...header to connect to raspberry PI3, The circuit must have 6 Digital Inputs 24vdc opto isolator with LED , 6 Digital outputs opto isolator with LED, 2 analog outputs 0-10v instrument signals , 2 analog inputs 0-10v instrument signals. RS 232 output using Uart from PI DB9 connector , rs485 2 wire using Uart from pi with 5.08mm 2 way terminal , ( either

    $185 (Avg Bid)
    $185 Avg Bid
    7 bids

    I need a coin size PCB designed with [login to view URL] will wake up every 20 mins via Watchdog Timer (WDT) and send AT commands via rx/tx to a rf module with one analog input port .It will be powered by lithium 50mah lipo battery. You only need to make the firmware that lets the MCU wake up in every 20 mins. Further programming and interfacing with RF module

    $214 (Avg Bid)
    $214 Avg Bid
    16 bids

    The project is as follows: 1. The project uses TI Tiva C Board. There are...5. We want to store the pre-recorded warning messages in an SD card/ Flash memory of Tiva board and use DMA (Direct Memory Access) to fetch them and give it to a Digital to Analog Converter and then to a speaker. Timeline involved: 2 days Please contact for further details.

    $104 (Avg Bid)
    $104 Avg Bid
    2 bids

    ...V2.0). The load cells will be measured using TI ADS1232 ([login to view URL]). PCB must include: - SX1509 i2c digital port expander - ADS1115 i2c analog port expander - DS3231 RTC clock + coin battery - Voltage Regulator Input 12V to 15V to 5V and 3.3V I'm attaching sketch schematic with my first idea based on similar projects

    $1185 (Avg Bid)
    $1185 Avg Bid
    52 bids

    Hey there, I need a small circuit to sense medical signal and transfer via wify/ bluetooth along with filters.

    $312 (Avg Bid)
    $312 Avg Bid
    10 bids

    I have 4 analog pstn lines, connected to grandstream gateway then to LAN, FreePBX call center installed in the same LAN, brand new MikroTIK router to be configured as PPPoE client and allow SIP traffic through network

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    3 bids

    I need a code to send the analog temperature data from tmp36 through zigbee, and at receiver end zigbee to ardunio. we are using two xbee s2c, arduino uno.

    $21 (Avg Bid)
    $21 Avg Bid
    9 bids

    ...parameter is in help Matlab on the official site. [login to view URL] Input and output parameters on C++ (Qt) have to be in such look: / *! An analog of the interp1 Matlab function (with the 'pchip' parameter) param aSrcX is a vector of abscissae of the interpolated counting (parameter x in matlab); param aSrcV is a vector

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    Hi, I need a analog gps clock with Arduino. Arduino Nano, NEO-6M GPS Module and DMD P10 (Dot Matrix Display). Those are the components. I attached the Display Picture Given Below.

    $170 (Avg Bid)
    $170 Avg Bid
    15 bids

    ...to my subjects ( Cloud Computing, Computer communication network, Optical communication, Wireless & mobile communication, Radar Engineering, Network Analysis and Synthesis, Analog Communication, Signal and Systems, Field & Waves, Antenna & Wave Propagation, Information theory & Coding, Digital Signal process, The projects should be based on year around

    $1252 (Avg Bid)
    $1252 Avg Bid
    20 bids

    ...page examples and specs. To start I have 3 clients in the below niches: 1. Windows and Door Company 2. Sushi Catering Company 3. Transfer to Digital Company (Transfering analog audio or video into digital format) Plus more on the way. Ongoing work. Please provide examples of past landing pages, and brief introduction of your skillsets and what

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    12 bids

    ...continue this initial OO code that loads on a Due board and will have to set via SPI the individual values of 24 digital potentiometers (Analog Devices AD5174BCPZ-10-RL7) and to read, also via SPI, data from 3 ADCs (Analog Devices AD7689BCPZRL7) each with 8 channels. The Arduino Due uses 4 digital ports (23, 25, 27, 29) to encode the CS, and a demux (Texas

    $222 (Avg Bid)
    $222 Avg Bid
    8 bids

    Need to develop a logo for a Exhibition/tradeshow called Engarde. it is a celebration of analog gaming with a focus on Miniature gaming, Tabletop games including collectable card games and roleplaying games. Logo needs to be contemporary and stylish

    $45 (Avg Bid)
    $45 Avg Bid
    85 bids

    i have designed my own controller been facing issues with some connections. I just want to know what changes i need to put into Ps4 c...manufacturers to make a prototype for me Work to do :- Divide PS4 controller in two equal parts from center (left and right) then replace right analog stick with optical mouse sensor which will work as analog stick

    $138 (Avg Bid)
    $138 Avg Bid
    9 bids

    Need help solving some practice problems for analog and digital communication systems and signals.

    $129 (Avg Bid)
    $129 Avg Bid
    11 bids

    ...software design (hardware components list and wiring + code) of simple but fast analog linear encoder speed monitoring system. Analog encoder is being moved at specific and short move with deviating speed, there for I need to get speed measurement in 1 millisecond increments. Analog encoder's technical spec is attached. Model used is with 100 mm stroke.

    $122 (Avg Bid)
    $122 Avg Bid
    9 bids

    The software must acquire data from analog inputs and convert the data into an image file (.png)

    $558 (Avg Bid)
    $558 Avg Bid
    17 bids

    ...download and 10.0 mbps upload (no wireless or satellite connections) Basic landline telephone phone device (required during training and for production calls) A traditional, analog phone line (POTS line) No call features. Removal of all features is required and this may require contacting your provider. Corded telephone headset that plugs directly into

    $512 (Avg Bid)
    $512 Avg Bid
    26 bids

    ...heterodyning of two highly coherent optical signals can allow for both OPEX and CAPEX savings. In this project, the student is to investigate the possibility of realising a hybrid/analog beamforming for 5G networks by generating the required RF signals remotely and distributing them to the Remote Radio Units (RRU) using optical networks. The student will be

    $331 (Avg Bid)
    $331 Avg Bid
    4 bids

    ...music. I want to build a prototype of a website that provides access to a fully remote controllable digital/analog studio environment. In this environment, clients pay for time to mix and master their own music using a blend of software and analog equipment, all fully remote controllable. At the moment, I am envisaging this on a Mac environment. A good

    $667 (Avg Bid)
    $667 Avg Bid
    7 bids

    ...heterodyning of two highly coherent optical signals can allow for both OPEX and CAPEX savings. In this project, the student is to investigate the possibility of realising a hybrid/analog beamforming for 5G networks by generating the required RF signals remotely and distributing them to the Remote Radio Units (RRU) using optical networks. The student will be

    $587 (Avg Bid)
    $587 Avg Bid
    4 bids

    I need a circuit and a PCB developed for the following project: This is going to be a very simple chicken coop door controller with nothing but the essential features. The circuit must not have anything oscillating at over 9kHz to be exempt from FCC testing requirements. Clarification: Nothing should be working on frequencies over 9kHz in the circuit. Components that are capable to work at frequen...

    $219 (Avg Bid)
    $219 Avg Bid
    9 bids

    I have schematic and need to design PCB layout. It is 1 page Schematic, with 3 different grounds, DIG, ANALOG, GND for a power supply.

    $140 (Avg Bid)
    $140 Avg Bid
    63 bids

    ...values to Arduino via Serial but the issue is the value is from 0 - 65303 range from JoyStick analog input and for the ESC receives signals from Arduino between 1000-2000 I did some Map on Arduino with no luck all I need to do is : when move the joystick analog inupt it should rtanslate that to the Arduino with same range so the motor which is connected

    $23 (Avg Bid)
    $23 Avg Bid
    9 bids

    I need an app like Uber, but for freight. It should be three apps for Android and IOS. Customer app. This app is for people who want to transport their cargo. The customer can add a new order to the app which contains: pick up location, drop off location, the type of truck needed, the weight of the cargo, type of freight, deadline. Besides, the client must see the movement of the truck on the ...

    $1268 (Avg Bid)
    $1268 Avg Bid
    51 bids

    ...Microcontrollers, Microprocessors and Simulation Software Like IAR, Kiel-MDK • Knowledge of Microsoft Office Job Description:  Responsible for Marketing and Sales of Embedded and Analog tools based on Texas Instruments Semiconductors to Educational Market  Achieve assigned Revenue target by conducting end-to-end Sales & Marketing activities from Assigned

    $470 (Avg Bid)
    $470 Avg Bid
    2 bids

    You must have multisim or be able to analyze Analog circuits. I need answers to a lab report regarding Vout, Fc1, Fc2, BW, and other values. I can do this myself within 2 hours using multisim but have no time.

    $28 (Avg Bid)
    $28 Avg Bid
    8 bids

    We need to develop a data analysing and visualization telemetry system using ARDUINO MEGA 2560. The inputs for the system will be various sensors (digital, analog, hybrid, etc). The software should be setup in this way so it will easily set the variations of any sensor connected and calibration parameters too. There will be a Capacitive Touch Screen

    $569 (Avg Bid)
    $569 Avg Bid
    15 bids

    ...100 mV or lower Input impedance of electrode: > 1012 ohm Input bias current: <50 pA Common mode rejection ratio: > 50 dB (1 MHz) Sensitivity scale: ³10-9 in different ranges Analog/Digital converters: 16 bits or higher Serial or USB ports for data communication Scanning mode:Logarithmic/linear, increase/decrease...

    $157 (Avg Bid)
    $157 Avg Bid
    1 bids

    I have project which is on Analog data aquisition, to PC and it has to be plotted on PC software , kindly quote best rates and contact me for more details

    $449 (Avg Bid)
    $449 Avg Bid
    14 bids

    Hi, I need a analog gps clock with Arduino. Arduino Uno, NEO-6M GPS Module and DMD P10 (Dot Matrix Display). Those are the components. I attached the Display Picture Given Below.

    $153 (Avg Bid)
    $153 Avg Bid
    26 bids

    ...module for my raspberry pi with circuitpython/Trinket m0. I have everything setup'd from raspberry side. However Im new to circuitpython, I dont have time to learn it. I have: analog input = ignition_wire digital input = rasp_state digital output = poweron_relay digital output = shtdwn Ive wrote sample code([login to view URL]) what I need, however I dont know how

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    The system will get command through SPI channel to generate custom frequencies (between 0.05hz to 1khz) in 10000 samples for a cycle and save it to a look-up tab...frequencies (between 0.05hz to 1khz) in 10000 samples for a cycle and save it to a look-up table And in the second command will send the values of the sine-wave to Digital to Analog device

    $550 (Avg Bid)
    $550 Avg Bid
    12 bids

    We need to develop a telemetry system using ARDUINO MEGA 2560 and/or Raspberry Pi 3 B+. The inputs for the system will be various sensors (digital, analog, hybrid, etc). The output will be delivered localy (equipmend with screen), maintanance handheld equipmend (customized fabricated monitor with display or smartphone/ipad) and remotely to web page

    $1474 (Avg Bid)
    $1474 Avg Bid
    30 bids

    ...heterodyning of two highly coherent optical signals can allow for both OPEX and CAPEX savings. In this project, the student is to investigate the possibility of realising a hybrid/analog beamforming for 5G networks by generating the required RF signals remotely and distributing them to the Remote Radio Units (RRU) using optical networks. The student will be

    $953 (Avg Bid)
    $953 Avg Bid
    4 bids

    For the realization of a device similar to a stethoscope, I look for an analog audio expert to reproduce a device similar to the attached image (the shape is to be designed) but that is optimized for listening to internal liquids (like water) at contact with the human body

    $973 (Avg Bid)
    $973 Avg Bid
    17 bids

    ...heterodyning of two highly coherent optical signals can allow for both OPEX and CAPEX savings. In this project, the student is to investigate the possibility of realising a hybrid/analog beamforming for 5G networks by generating the required RF signals remotely and distributing them to the Remote Radio Units (RRU) using optical networks. The student will be

    $418 (Avg Bid)
    $418 Avg Bid
    2 bids

    ...(an older, simple, 6-pin, 8-bit MCU w/ built-in clock and comparator). The program/device simply sleeps in low power until PIC detects pin change, then wakes up and compares analog input voltage level to a programmed threshold, then if threshold is exceeded, checks same pin again to ensure no glitch, then if threshold is still exceeded outputs a logic-level

    $655 (Avg Bid)
    $655 Avg Bid
    25 bids

    I need someone who is professional in Arduino programing. What Is Needed: 1- After I entered SSID,Pass. I...I need the arduino to search for the nearest access points and get the MAC address and send it to a specific web page as a JSON Data. 2- I need to read data that come from Analog (A0) and send it to a specific web page as a JSON Data. Thank you

    $208 (Avg Bid)
    $208 Avg Bid
    20 bids