I am installing the existing magento project on my local, but the ssl is not working well. when I do i...working well. when I do it with "https://", I always see: "Your connection is not private, Attackers might be trying to steal your information......" I followed the guide to do [login to view URL] in Xampp. I'd like to fix this problem immediately.
...setup a directory listing on my website; want to list files so they can be clicked on in the listing. This is Apache running on Ubuntu in a docker. [login to view URL] Is $10 ok? (If not how much?) (Did I miss something?) We can work on Google Hangouts or any desktop sharing you may have? Please share your thoughts
Using teamviewer or other vpn to my workstation (for root access), add a functioning [login to view URL] rewrite map to /etc/httpd/conf. on a centos 6 dedicated server. Test [login to view URL] and [login to view URL] are already prepared. Please don't bid unless you are familiar with this process.
...troubleshooting when problems arise. Currently I need someone to check logs to find out why my server has gone down twice this week with the notification "The service “httpd” appears to be down." According to my host, the hardware is fine. They suspect a security setting that is blocking pings or perhaps software corruption. I need you to find
...including PHP, Mysql, phpMyAdmin. 1. Full setup required as like localhost. 2. I want the file can be edit through FTP of the etc. 3. Htaccess files should work properly. 4. Httpd folder can accessible for edit the config file. 5. PHPMyAdmin setup should be done for the database file uploading or if any other way to upload also fine. 6. Domain setup to
...requires clearing all caches before responding There is not a heavy load on this server running a magento 2 stack There is plenty of RAM but still i have to clear cache to get httpd back up The graphs included show the use of memory on an hourly daily and weekly basis Need someone who is able to optimize the memory settings for PHp, http, mysql and redis
I am trying to configure CentOS 7 Server and ran below commands... yum update yum install -y wget yum install httpd service httpd start The last command created folder named www inside var folder which is present on the root. There is now html folder also in www. I then uploaded a file [login to view URL] in html folder When I tried to run access the url like
CWP Control WebPane Apache Webserver error Starting httpd: httpd: Syntax error on line 434 of /usr/local/apache/conf/[login to view URL]: Syntax error on line 2 of /usr/local/apache/conf.d/[login to view URL]: Cannot load /usr/local/apache/modules/[login to view URL] into server: /usr/local/apache/modules/[login to view URL]: cannot open shared object file: No such file
Our servers are Red Hat Enterprise Linux 7.5 with Software Collections repository. Our apache 2.4.6 is the package httpd24-httpd v188.8.131.52.el7.1 from Software Collections. We would like to have the module [login to view URL] recompiled to fix a bug as described in [login to view URL] We can provide ssh access to a server
Hello, I have Excel document with all the mapping to fulfill an order on Aliexpress. I have many o...safe. Transaction involving money... It need to be done in background or very fast way. I received many offers with Selenium + Python but I prefer a background process or httpd. If you still want to offer Selenium + Python solution consider low bids.
I need an apache configuration that enable me to communicate with rsyncd on a third m...apache configuration that enable me to communicate with rsyncd on a third machine over stunnel <----> httpd. On the client: rsync over stunnel will be used (using RSYNC_PROXY) On the server (gateway) httpd On the target machine the is a rsyncd and a httpd running.
In CentOS 6 & 7, we need you to setup following servers for learning purpose: 1. Master DNS, Slave DNS, HTTPD - Its already setup, just check few issues like not able to resolve multiple websites on local web server 2. Secure Web Server 3. SQUID Server Connect them altogether to demonstrate a real environment in class: DNS + WEB (HTTP & HTTPS) + MAIL
Hello, I have a wordpress instance that is having some problems. It's a Bitnami instance deployed on Google Cloud and since this ...(wordpress-fpm) failed [Mon Jun 25 08:01:52.765658 2018] [proxy_fcgi:error] [pid 2242:tid 140206086764288] [client [login to view URL]] AH01079: failed to make connection to backend: httpd-UDS, referer: https://www.....
my website is under attack, when i search in httpd logs it shows my server ip is atackking with brute force requesting an php url , but is not thats why fail2ban and apache mod_evasive cant blokecked. NOTE: i need to know from wich ip they atacking or stop that attack, please i need p[eople who has experience this before
i've set up a linux server and when entered "service httpd restart" i get error "Job for [login to view URL] failed because the control process exited with error code." - issue needs to be fixed with the server working fine
...a WordPress website, I am using w3 total cache. but when huge traffic spikes come, the website goes very slow / Down. load average goes to 50 or sometimes 200! with lot of httpd processes on the top command I Am on Amazon AWS [login to view URL] , RDS Small, I need the website to be optimized for smaller server specs The job should be done over team viewer
Hi, i am facing a rather peculiar problem that suddenly when my server is running there is an apache process (httpd) which takes 100% of my ram and 100% of memory, i am unable to find the problem and resolve this. i require someone with full knowledge of Amazon linux, apache (Httpd2), and if required php (since website is developed on it). Once
..." exit 1 fi cp $domainfilename "$[login to view URL]" sed -i "s#documentroot.*#documentroot: $publicpath#" $domainfilename /scripts/rebuildhttpdconf service httpd restart #if ["$username" != ""]; #then if [ ! -d $rootpath ]; then echo "Creando el directorio $rootpath" mkdir "$rootpath" fi git ...
Hi, I have a server I need help with setup. I can have CentOS 6 or 7 installed. On the server I need to install httpd, cURL, php with SSL support. I need cURL and httpd/apache to support http2 (likely using nghttp2). Pretty simple, just need a set of commands so that I can re-create this setup on multiple servers.
Al of a sudden we got massive High PIDs for httpd in directadmin today also server is comprised all the time with replaced [login to view URL] or index,html files in domains we need this fixed and secured , hackers probably using a back door specially the high load is making server go down. even reboot takes very long because of massive load server
Need to display my website on the Internet. I'm using a Windows server 2012. My Apache is working fine locally. I have a public IP address as well as my DNS is zoning A type is also set up. I also set up vhost For outside addresses. I know I must be forgetting something easy but I can figure it out. I am on port 90 instead of port 80 I do have that also opened up in my firewall as well as thr...
My server is throwing the following error... Warning: Unknow...current setting of session.save_path is correct (/var/lib/php/sessions) in Unknown on line 0 using php5.6 my guess is in [login to view URL] I need to create a custom path and maybe in httpd as well. either way just need to get it fixed. this is a small project and will not take much time at all.
...configured it to monitor "httpd" process So when I run these commands: snmpwalk -v 1 localhost -c public UCD-SNMP-MIB::prErrorFlag.1 snmpwalk -v 1 localhost -c public UCD-SNMP-MIB::prErrMessage.1 I get when httpd up: UCD-SNMP-MIB::prErrorFlag.1 = INTEGER: noError(0) UCD-SNMP-MIB::prErrMessage.1 = STRING: I get when httpd down: UCD-SNMP-MIB::prErrorFl...
Hi, I have server with Directadmin and I would like to create MIB file that will be able to send TRAPs to an SNMP device. The alerts should be: When httpd goes down When bind goes down When exim goes down When DirectAdmin goes down When named goes down When php-fpm56 goes down When mysqld goes down When CPU utilization reaches %80 When Memory
...commandline/script - so there is no real html to be created - however there will need to be PHP code to receive the form submission. Other important information: - We are using light httpd, php7. - We have two existing security features: 1) An option to limit reads from a list of remote hosts (from environment variables passed from the webserver) OR
We have problem with one of our servers. We ...line. Most because of php script old, and also ioncube loader of code written for php 5.2 I tried to revert back to custombuild 1.2, but see errors all over when loading httpd, because of previous installs need this fixed. for a good system admin, this is easy work, so bid according to that
site been getting attacked almost daily and becomes inaccessible. Now its been off line and found out httpd service is not starting . Need someone to fix httpd issue and make it start so site becomes online again without losing any data. Also need to protect it against future attacks so this wont happen again by reading all old logs and determine the
...Observium (SNMP service) without issue. I wanted to add FreePBX on to the same host. Both services are now installed and are running, but I need a helping hand with the httpd/virtual server configuration. Here's the install guides for both [login to view URL] https://wiki.freepbx.org/display/FOP/Installing+FreePBX+14+on
...Currently my site is in Joomla + Virtuemart I use VESTACP to do the server management and NGINX + Apache Unfortunately I'm having problems with maximum connections on NGINX / HTTPD This causes my server to crash and come back after a few minutes I think the solution would be to use a Rate Limiting with Nginx [login to view URL]
Hi, I need some one fix a vestacp error this project will lead to long term relationship Dec 26 13:58:45 [login to view URL] kernel: httpd: segfault at 0 ip 00007fd275d9284d sp 00007ffdcd6cde70 error 4 in [login to view URL][7fd275b27000+3d8000] Dec 26 13:58:45 [login to view URL] systemd: [login to view URL]: main process exited
Hi Shailendra K., I have a server with centos 7.x I want to install NGINX without apache or httpd And install all that you need to run the .cgi .pl files Again, just NGINX. no nginx proxy. I will pay you after submitting a successful CGI test file
...have 3 IPs mapped to my server. It has httpd, hosts 3 webapps (tomcat), has certbot ([login to view URL], fee ssl) installed. 2 websites have ssl enabled already. You will need: 1. generate certificate for a third domain name (I'm getting the 'Detail: Server only speaks HTTP, not TLS' error) 2. configure httpd routing for 3 domains: [login to view URL]
...[login to view URL] [login to view URL] [login to view URL] [login to view URL] 2. optimize [login to view URL] and [login to view URL] and put comments on every line 3. decrease the first page view below 2s. 4. solve http/https redirections issue (if any) the website url is https://spontando
Activate both services _____________________________ [root@vps441500 ~]# systemctl status httpd -l â [login to view URL] - The Apache HTTP Server Loaded: loaded (/usr/lib/systemd/system/[login to view URL]; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Fri 2017-11-24 16:37:59 CET; 11min ago Process: 15833 ExecStop=/bin/kill
Hi, I have a web server. T...have a web server. The web server is running well while i disable the SeLinux. But when Selinux is enabled, the following error is coming. (13)Permission denied: AH00091: httpd: could not open error log file /data/tactic/error.log. AH00015: Unable to open logs I need a quick fix of this. Reads, H. Sattar
I'm having issues with dedicated server that needs to be optimised. - The service “httpd” appears to be down. It restarts again. Need to check what is the cause? - The website is very slow. The configuration of the server: CPU Intel Xeon E5-2620v4 RAM 16GB DDR4-2133 ECC/Reg RAM 16GB DDR4-2133 ECC/Reg Harddisk 2000 GB SATA 3,5" 7.200 rpm
i have a Dedicated Server CentOsx6. A few days ago i have high load average, i cant know why reason. Today the server stop de httpd service and i cant start again When i try to start the httpd with Putty service httpd start Putty says this: Redirecting to /bin/systemctl start [login to view URL] Job for [login to view URL] failed because the control
Do you know a webinterface for the configuration of webservers (like Apache httpd or nginx) which writes/reads the config (Webservername, Certificates, Alias, IP-Protection, Redirects, etc...) into/from a database instead of the config files? So to create the webservers config files a different step is needed: Read the config from the database and
... Enable SSL / HTTPS on Tomcat Server and map url to tomcat ROOT folder. Also, we do not plan to use this server to run any php application dependant on Apache webserver httpd. After installation, the tomcat [login to view URL] file is inside tomcat ROOT folder. for instance [login to view URL] OR [login to view URL] Please
...configured controllermodz user. I have checked server configuration in detail that website is working on ngnix and httpd. Please tell to server expert that enable only nginx service on it and set document root public_html and remove httpd server and also create replica of live website which is sibling directory of public_html, URL of dev website should