Arduino data logger jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    11,261 arduino data logger jobs found, pricing in USD

    Need a prototype for a project. My needs are: Hardware * An Arduino based PCB * Two temperature sensors, preferably DS18B20 - The first temp sensor attached to a 1,1 meter long cable -The second temp sensor attached to a 0,2 meter long cable * A GSM shield, preferably SIM900 or other GSM shield that will work world wide * Re-chargable battery, preferably

    $586 (Avg Bid)
    $586 Avg Bid
    5 bids

    Hello, I'm looking for someone who can help me in building a drone. I have the basic schematic set but need some finetuning.

    $29 (Avg Bid)
    $29 Avg Bid
    7 bids

    I need to develop a mobile app (preferably for iPhone/iPad) to input boring data from the field. The idea would be to capture the data in real-time that can be viewed from an office anywhere in the world. It would require a simple user interface with basic inputs to be logged as samples are being recovered from the boring. It may help to explain the

    $569 (Avg Bid)
    $569 Avg Bid
    36 bids

    Hi, I need a Freelance Electronic Engineer to solve this issue:[login to view URL] llook mainly at the [login to view URL] and [login to view URL] (phone access and delete and to this (videos) [login to view URL]

    $156 (Avg Bid)
    $156 Avg Bid
    2 bids

    ...trigger camera (intervalometer function) using arduino. I currently have dowloaded 2 different sketch: 1. an advanced camera intervalometer/timer 2. shoot-move-shoot slider stepper motor controller. I would like to combine these two sketches into a single program. The hardware that i am using: 1. arduino mega2560 (with possibility to change later to

    $268 (Avg Bid)
    $268 Avg Bid
    5 bids

    I need to Build a system with a button switch and a servo: 1. rotate the servo clockwise for 90 degree when the button is pressed for the 1st time Emulating the open of doors 2. rotate the servo counterclockwise for 90o when the button is pressed for the 2nd time Emulating the close of doors we have to Use external interrupts to achieve this control

    $17 (Avg Bid)
    $17 Avg Bid
    5 bids

    I'm trying to build Arduino project to simulate a door opining and closing using servo

    $16 (Avg Bid)
    $16 Avg Bid
    4 bids

    ...cell voltage for each cell, temperature, warning flags or error codes, percent charge and battery firmware version for the DJI TB55 battery. While the battery is on and these data are being read, charging and discharging the battery must be allowed at the same time. All this functionality must be capable in a device other than the drone for which these

    $1707 (Avg Bid)
    $1707 Avg Bid
    12 bids

    I have an arduino code with blynk to open a garage door, send notifications when the door is closed and the door is open. I have 2 limit switches (closed and open) when the door is closed and the limit switch closed the led is fixed and sends me [login to view URL] "door closed" when the door is open and the limit switch closed the led is fixed and sends me

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    9 bids
    PID Arduino Valve1 5 days left
    VERIFIED

    Using a stepper motor attached to a needle valve to control the cooling water, I need the Arduino PID control code to regulate the temperature. Hardware is Uno or Mega, one DS18B20 temperature sensor, 16x2 LCD Keypad shield, MicroStepper, 2 limit switches, 24VDC 2 Amp minimum power supply, Keypad Shield: [login to view URL]

    $152 (Avg Bid)
    $152 Avg Bid
    17 bids
    Modify React.js project! 5 days left
    VERIFIED

    Project name: Scratch Skill require: JavaScript, Node.js, React.js, C++ and little knowledge on Arduino The project already integrate Arduino through Johnny five library, but there are still a lot work to do, such as adding more functions, fixing bugs

    $490 (Avg Bid)
    $490 Avg Bid
    21 bids

    Hi Rafael Dias S., I noticed your profile and would like to offer you my project of Arduino Project related to previous project. We can discuss any details over chat.

    $61 (Avg Bid)
    $61 Avg Bid
    1 bids

    Hello. We are using a board that integrates arduino, raspberry pi, motor drivers and some dc buck converters and we are having some issues. We need to move components apart from each other a little bit. We also need to make the board a little bigger, add some drill holes, do some corrections on the silk screen text and most importantly, our last board

    $452 (Avg Bid)
    $452 Avg Bid
    31 bids

    Hello. We are using a board that integrates arduino, raspberry pi, motor drivers and some dc buck converters and we are having some issues. We need to move components apart from each other a little bit. We also need to make the board a little bigger, add some drill holes, do some corrections on the silk screen text and most importantly, our last board

    $332 (Avg Bid)
    $332 Avg Bid
    10 bids
    Pcb Testing 4 days left

    Hello everyone, I need a PCB testing program which will be used on [login to view URL] to be simple i need a code which will be used on arduino. Will test my PCB or even a wire connected simple [login to view URL] gave me the results and tell me how many short circuits or open circuits i have.İt will be show up on little lcd [login to view URL] me for more info.

    $22 (Avg Bid)
    $22 Avg Bid
    1 bids

    I need working "Artnet to DMX" code modified. The code currently converts Artnet to DMX output. I need to turn on/off some output Arduino pins using the incoming data. I only want to deal with someone who is an Arduino expert. NO amateurs or beginners!

    $80 (Avg Bid)
    $80 Avg Bid
    3 bids

    ...project which needed cable connection and file transfer with iOS Devices, we need to accomplish OTG cable or a different cable connection. Our devices are kind of Arduino and we trying to transfer data like mp3 files to from iOS devices, but there is not a source on the internet about file transfer with cable for an iOS device. We just need to figure it out

    $222 (Avg Bid)
    $222 Avg Bid
    1 bids

    build a arduino and c#, with adding and minus function.

    $170 (Avg Bid)
    $170 Avg Bid
    3 bids
    Programming Project (arduino) 4 days left
    VERIFIED

    Need an expert in programming. Budget- 35$

    $26 (Avg Bid)
    $26 Avg Bid
    29 bids
    coding help 4 days left

    I need help a little bit with arduino using AD9833

    $26 (Avg Bid)
    $26 Avg Bid
    3 bids

    ...pass a thresshold, consider it as key press). 12 of them for numbers 0 to 9, *, # and 4 buttons on the right with special functions ( send, read, clear, backspace). like this arduino project : [login to view URL] Only this time everything will be under plastic, no moving parts and all you need to operate is a magnet attached to

    $140 (Avg Bid)
    $140 Avg Bid
    3 bids

    please do contact if interested

    $23 (Avg Bid)
    $23 Avg Bid
    12 bids

    Build an Arduino-based data collection unit to collect data from two separate networks of DS18b20 and AM2303 sensors (already existing). The DS18b20 sensor network is constructed with Cat 6 cable, and all sensors are on one pin, using RJ45 splitters. The AM2302 network has four separate pins each attached to one sensor. Two other pins can be used for

    $652 (Avg Bid)
    Urgent
    $652 Avg Bid
    17 bids

    To create audio monitoring hardware that can identify songs and pass the data to a web platform to generate spread sheets on what music was played at a specific time. Hardware should consist of a pi zero w unit with Gsm hat (to pass the data) or something similar on arduino platform. Software side should be scalable.

    $1247 (Avg Bid)
    $1247 Avg Bid
    19 bids

    I want program to define and recognize specific hand gestures using kinect to control light o...recognize specific hand gestures using kinect to control light of the lamp which it connect to arduino . important notice: here I want the first portion witch it program to specify on gestures and off gestures to recognize it and then send it to arduino.

    $508 (Avg Bid)
    $508 Avg Bid
    23 bids

    I need an Arduino script which will take a string of data (imei=744&momsn=12&transmit_time=1&iridium_latitude=1&iridium_longitude=1&iridium_cep=1&data=1) and sent via HTTP Post to a PHP file on a server, via a GSM Modem. The modem communicates on pins 7 and 8.

    $175 (Avg Bid)
    $175 Avg Bid
    25 bids

    ...event (as a game for my guests) a wearable containing microcontrollers (RS822 maybe?) communicating with each other in some kind of a network. The guests should be able to input data on a website and it should be stored on the microcontroller. When close to each other 2 guests' microcontrollers with same input (eg letter A) should be able to recognize each

    $268 (Avg Bid)
    $268 Avg Bid
    4 bids

    ...list of sounds (so that i can decide which to use depending on its effectiveness to scare these animals...) work description : ->design the circuit, design the code (using arduino board?), suggest the parts to use ->note : you only have to work on the circuit design and code, i will buy / make the parts (shape of the dog, roof/box for the device). ->test

    $236 (Avg Bid)
    $236 Avg Bid
    6 bids
    Dmx program for arduino 3 days left
    VERIFIED

    I need a simple program for arduino that will take a dmx signal through usb or pwm pin and turn on output channels accordingly. Atmega 2560 or larger.

    $103 (Avg Bid)
    $103 Avg Bid
    8 bids

    hello i am pursuing my electronics engineering and i want the coding and the ...pursuing my electronics engineering and i want the coding and the pin settings of the rain guage sensor using RJ11 connector and DHT22 (temperature and humidity sensor) using arduino. and also need to get the notifications on mobile phone using a wifi module in the project

    $130 (Avg Bid)
    $130 Avg Bid
    17 bids

    i have a electronic website, about Arduino which is a small programmable controller. I wuold like to have my own logo about Arduino. I need something like the Picture that i uploaded

    $31 (Avg Bid)
    $31 Avg Bid
    31 bids

    ...spammers) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Part 2: This app must be controlled by a set of gestures from an Arduino (or similar, open to suggestions) setup. The setup must consist of one element in the thumb and one element in the index finger IN EACH HAND, and it must also be bluetooth

    $2370 (Avg Bid)
    $2370 Avg Bid
    32 bids
    Data Logger ARM / Corex 2 days left
    VERIFIED

    To create a Data Logger using a Hercules TMS570LS12x LaunchPad Developement kit. Texas Instruments To create the associated libraries and step by step instructions for correct connection and installation. The Data Logger is to act as a bus/signal sniffer, which records all data to be saved to SD Card. With Date, Time, Signal Type and Signal recording

    $157 (Avg Bid)
    $157 Avg Bid
    5 bids
    Trophy icon Design a logo and a profile 2 days left

    We are working on en product that logging flows a Flow Logger (flower). We need design of pictures/logos with a flower built with flow symbols (process step arrows). We need pictures with one flower (titled: "Flower") and with a bunch of flowers (titled: "Bouquet") We appreciate many variations and colors of the flowers. See attachment 'flower_skiss

    $22 (Avg Bid)
    Guaranteed
    $22
    58 entries
    fuel control 2 days left
    VERIFIED

    ...controlled by a potentiometer (throttle regulation) problem is injectors are 12v and I need to control voltage per cycle and duration of it to vary fuel delivery to engine. board, Arduino nano in short -fuel delivery control for 4 injector -injectors from min5v up to 12v (fully open) and control of injection time (voltage vs time) -termistor/temperature sensor

    $53 (Avg Bid)
    $53 Avg Bid
    21 bids

    I need to interface AWS IOT with the ESP8266 wifi board so that when I update the shadow state in AWS IOT, the ESP8266 should take some switching action on its digital pins.

    $31 (Avg Bid)
    $31 Avg Bid
    11 bids

    I need an App that can get RDBMS data and notifications from a private server and can also send data to that server. The server will be uploaded with sensor data from the field 24 x 7. Need API that will run on the server to do basic analysis on the data and send some data to app. The app user will respond back to server. the server will store the

    $233 (Avg Bid)
    $233 Avg Bid
    5 bids
    Android Peripherals with App 2 days left
    VERIFIED

    ...spammers) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Part 2: This app must be controlled by a set of Peripherals from an Arduino (or similar, open to suggestions) setup. The setup must consist of one element in the thumb and one element in the index finger IN EACH HAND, and it must also be bluetooth

    $2735 (Avg Bid)
    $2735 Avg Bid
    53 bids

    Hi, I have a working piece of Arduino code for the Uno / m328p that operates two 8x8 SZ410780N LED matrices through 4 x 595 shift registers (standalone m328p schematic attached) and turns it into a digital hourglass. The attached source code works great. It uses a pot to adjust the amount of measured time. It also has two tilt sensors to detect position

    $23 (Avg Bid)
    $23 Avg Bid
    7 bids

    So I have a Arduino ESP8266 that I need programmed. I woud like to be able to connect to it via a wifi and password connection and visit a webpage that would ask me what I want the oled screen to display Then I could type in some numbers and it would display it on the screen. Let me know if you could help with this. Thanks

    $224 (Avg Bid)
    $224 Avg Bid
    5 bids

    Arduino converter to Windows PC keystroke Hello Freelancers, I need an Arduino that will preform a keystroke in a Windows PC. From an outside source, I am receiving values in the digital PWM, these need to be converted into Fkeys. I would like assistance with this now please and am ready to start now. Please let me know if you have questions.

    $220 (Avg Bid)
    $220 Avg Bid
    9 bids

    ...to an Arduino (Teensy, etc. ) that will receive channel commands from a RC Rx then convert that to a Windows PC in keystroke form. For example, on the RC Tx, if a user triggers channel 6, that will eventually command a keystroke on a Windows PC, remotely. Any RC protocol can be used if one is easier than the next. USB is preferred from Arduino to PC

    $172 (Avg Bid)
    $172 Avg Bid
    5 bids

    We want to send existing code instructions from Raspberry to two arduino mega. The instructions must be able to be sent from Raspberry to each arduino simultaneously. The the arduinos send the signals to the controllers which move the stepper motors. Each arduino is connected to eight stepper motors and they must be able to move simultaneously.

    $21 (Avg Bid)
    $21 Avg Bid
    7 bids

    I would Like to read informataion from my Landis+Gyr smart meter to a web server using Arduino or Raspberry Pi and DLMS COSEM. The scope of this project will include writing the program to read Energy consumption from smart meter. Send the read information over the internet to a remote server. The program should be able to receive remote command

    $551 (Avg Bid)
    $551 Avg Bid
    6 bids

    its a multi board robotics project with arduino driving [login to view URL] of the wiring has come undone and needs faultfinding

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    14 bids

    Help with using Sparkfun L6470 AutoDriver - v13 connected to Arduino Mega in driving several stepper motors simultaneously. Need connection diagrams and codes. The setup: Two arduinos mega get existing code instructions from RPI, then via eight LS370 controllers drive eight stepper motors. Instructions for setting up Sparkfun L6470 can be found here:

    $626 (Avg Bid)
    $626 Avg Bid
    4 bids

    I have a 7inch Nextion display have a look screen in the Attachments. The project needs Motor RPM control and Temperature control with the relay. Only Nextion and experience guys required.

    $201 (Avg Bid)
    $201 Avg Bid
    18 bids

    Using a stepper motor attached to a needle valve to control the cooling water, I need the Arduino PID control code to regulate the temperature. Hardware is Uno or Mega, one DS18B20 temperature sensor, 16x2 LCD Keypad shield, MicroStepper, 2 limit switches, 24VDC 2 Amp minimum power supply, Keypad Shield: [login to view URL]

    $288 (Avg Bid)
    $288 Avg Bid
    9 bids

    I need to control stepper motor with arduino uno. I want to control 2 motors at the same time. firstly i want to rotate first motor only 30 degrees with acceleration (for example. kind of 0->1 -> 2> 3> 4>- ~~~ >100, and it should take 1second reaching from start to the end. and them should rotate back from the end to the start point with deceleration

    $140 (Avg Bid)
    $140 Avg Bid
    4 bids

    Make Pong game Processing language using arduino I have done half

    $167 (Avg Bid)
    $167 Avg Bid
    6 bids