Arduino gyro servo jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    12,331 arduino gyro servo jobs found, pricing in USD

    There will be follow-on work for similar projects if the coder can demonstrate competence and speed. I am designing an Arduino system that weighs a box and will send me an automated email or notification when the weight of that box drops below a set value. To do this, I need a coder that can write the following Arduino code for me: 1. Interface an HX711 module, Load Cell and ESP8266 Arduino Bo...

    $123 (Avg Bid)
    $123 Avg Bid
    22 bids

    Hi, I am making a laser obstacle course using time of flight sensors attached to an Arduino using a multiplexer and communicating through I2C. It is working but randomly stops for no apparent reason. I need someone who has experience with this kind of thing who can look at my code and guide me in altering it or the electronics in whatever way we need to in order to make it work consistently....

    $422 (Avg Bid)
    $422 Avg Bid
    8 bids

    Need someone who worked with this module before.

    $95 (Avg Bid)
    $95 Avg Bid
    13 bids

    I want an android app which can be connect with arduino using [login to view URL] app should have 4 buttons and a [login to view URL] each button you will enter a time and send this time to arduino in [login to view URL] must be an start button which will send the all buttion entered duration to [login to view URL] must start working for the first time duration and as the duration of first time co...

    $13 (Avg Bid)
    $13 Avg Bid
    10 bids

    The goal is to detect alcohol using alcohol sensor and act accordingly. The main project is detecting alcohol and control the car, but as we are making the modal purpose so here we control the dc motor using Arduino. So, Aim is as we detect the alcohol using the sensor the dc motor should stop working and should not start again untill the sensor doesn't detect the Alcohol. This is a basica...

    $87 (Avg Bid)
    $87 Avg Bid
    43 bids

    Libelium Waspmote (gateway) based weather station with hydrometeorological sensors (GMX-600, water temp, solar radiation ect.), connected to cloud service via GSM/4G. Gateway must include additional LoRa868 module. Sensor`s measurement data translated via LoRa868 to Libelium Waspmote based node`s to display measurement result on DMD P10 32x16 panel`s

    $614 (Avg Bid)
    $614 Avg Bid
    14 bids

    We have a few different projects that we would like to accomplish- mostly revolving around the Arduino and stepper motors. We are interested in mechatronics and would like to learn more about it but currently, we do not have much experience. For this reason, we are looking for someone experienced to guide us through various roadblocks as they come up.

    $6 / hr (Avg Bid)
    $6 / hr Avg Bid
    12 bids

    I need an expert who can recommend and implement a hardware and software solution for a BLE communication, accelerators (return position coordinates). Basically, it is a remote control with a twist. Both remote and receiver must use the same micro-controller and are attached to LED strip. Only the Remote has the XYZ accelerator. They must sync and communicate securely. No other devices or phone m...

    $695 (Avg Bid)
    Urgent
    $695 Avg Bid
    20 bids

    Hi Jorge P., did you finish your project: "Write Arduino library for ICM-20789". I am very interested in your libary :)

    $9 (Avg Bid)
    $9 Avg Bid
    1 bids

    I would like to create a professional app that can control RGB LED Strip (WS2812B) over WiFi. I currently have an App created (using App Inventor) and the controller's code created (using Arduino), but it is basic. I am looking to upgrade the App to a more professional look. About the App: When the user first buys this product, he/she needs to hook up their new LED Controller to the local Wi...

    $1283 (Avg Bid)
    $1283 Avg Bid
    44 bids

    I need to run 4 cable robot system on rapsberri pi 3(fell free to suggest a better solution), so raspberry pi3 runs stepper drivers and reads analogue joysticks, or any hobby radio transmitter with cppmpwm output. All kinematics equations will be provided if needed(it`s opensource). Feel free to port any existing Arduino project. I got following questions 1 - if there is enough outputs on raspbe...

    $158 (Avg Bid)
    $158 Avg Bid
    8 bids

    Hello, I have a DA 8620 driver connected to a small OLED display. The driver is connected to a PCB expansion board so each pin on the display is expressed to 39 through hole pins that can be easily soldered. The display, however, still requires power and data as seen in the technical document PDFs I can attach. Ideally, I'd want someone to design and implement a solution for connecting this d...

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    i need a very vast and experienced developer who is skilled in designing motors and controllers that are arduino driven.

    $47 (Avg Bid)
    $47 Avg Bid
    17 bids

    Hello, I have a DA 8620 driver connected to a small OLED display. The driver is connected to a PCB expansion board so each pin on the display is expressed to 39 through hole pins that can be easily soldered (see attached image). The display, however, still requires power and data as seen in the technical document PDFs below. Ideally, I'd want someone to design and implement a solution for con...

    $230 (Avg Bid)
    $230 Avg Bid
    13 bids

    what i need to done is that : using arduini UNO and Andriod Studio I want to send a warning to the mobile application that should be made using Andriod Studio. from the sensor LM35 measurment using esp 8266 as wifi. i made some user interface with the Andriod Studio that I will give it to the person who is gonna help me with the code.I also want to use (Nokia 5110 lcd) connected to the arduino t...

    $55 (Avg Bid)
    $55 Avg Bid
    18 bids

    Hello, I have some basic understanding / experience with arduino langage / (UNO) board to make some cool / useful devices. I would like to learn how to save / load datas on a (micro) sd card. I need your help to learn how to : -check if sd card is present -list all files on the sd card -check if a file exists -create a file -delete a file -open a file -close a file -write / read a byte in th...

    $25 (Avg Bid)
    $25 Avg Bid
    22 bids

    i need an electrical and micro controllers expert who is skillful and experience in designing Motors and Controllers. Controller will be arduino oriented...If you need further information, that will be discussed in the chat.

    $37 (Avg Bid)
    $37 Avg Bid
    19 bids

    i want to start the project immediately. if you are expert and free, please bid here. thanks

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    35 bids

    We're a team of 4 engineers from the University of Rochester and we're designing a new kind of musical instrument based upon a flexible piezo-resistive touchscreen. Functionality has been demonstrated via breadboard. We are now ready to optimize the electrode design and transfer the circuit to a PCB. But none of us have Eagle or CAD experience, so we are in need of assistance.

    $1008 (Avg Bid)
    $1008 Avg Bid
    68 bids

    There is a project in the following link. [login to view URL] I used the codes in the link to create the project. I can be able to make connection between mobile application and firebase google but I can not be able to activate ESP8266 via firebase. Android Studio, firebase google and Arduino knowledge is needed. I need to run the complete project in the link. Thanks. & Regards.

    $28 (Avg Bid)
    $28 Avg Bid
    12 bids

    What I need is very simple. I have a Nema 23 motor, connected to a TMC2208 stepper motor drive chip. I have an arduino Uno, and a variable resistor to control speed. The motor must turn in one direction, with the variable resistor controlling speed. It also must be quiet (<30dB) and maintain torque at all speeds (30-70rpm). Right now I am powering the motor through 24V variable power supply, ...

    $35 (Avg Bid)
    $35 Avg Bid
    29 bids

    Overview: I'm currently using an esp07-slave triggered by events that sends a message to the esp12-master. The esp12 then directs the ardunio to turn-off a solenoid & sends push notification to the app. The arduino also supports an HC-05 module linked to the android app. The simple app can open or close the solenoid. Arduino also uses a manual push button momentary switch to open or clos...

    $196 (Avg Bid)
    $196 Avg Bid
    11 bids

    Deliverables: Source Code and dependency libraries. Need home automation device software (C/Arduino Code) for the NodeMCU and ATMEGA328 (code for both, but hardware will be one or the other). Device is basically a home automation switch compatible with Apple HomeKit, Google Assistant, and Amazon Alexa. Has two Relays to be controlled. It can be controlled also by IR remote and two physical switch...

    $288 (Avg Bid)
    $288 Avg Bid
    23 bids

    We need adopt or design bldc motor and controller for robot joint: - round motor - 60-110mm diamerer - 20-40mm thick - low speed 5-60 rpm - high torque - 20Nm from start (0rpm) - no gear - direct drive or quasi direct drive (max gear 1:12) - controller driven by arduino - using existing motors and controllers highly recomender

    $223 (Avg Bid)
    $223 Avg Bid
    3 bids

    i need your development small program use arduino, main function is to trigger the servo motor according to user input times(hour), parts include is arduino nano, RTC, OLED display, push button, switch, LED.

    $78 (Avg Bid)
    $78 Avg Bid
    31 bids

    I will build c programs, arduino programs.

    $8 (Avg Bid)
    $8 Avg Bid
    1 bids

    I also wish to have followed done - I wish to have 4 tap line. 4 different types of beer with flow meter. - Not use touch screen. Just use ordinary screen and keyboard and mouse. - Use a Arduino nano for flow meters and Arduino NRF24L01+ 2.4GHz Wireless Transceiver Module for sending flow meter signal from Arduino to Raspberry pi unit. This is so the Arduino can be mounted with the flow meter a...

    $134 (Avg Bid)
    $134 Avg Bid
    9 bids

    The project is about face recognition and image processing. if you are expert and available, please bid here. no time [login to view URL]

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    11 bids

    the goal is to basically have an arduino with two sensors, the pulse one and a gyroscope, ive already connected them and have the data sending the information to the app I need the database to manipulate the results, send them to the api, and depending on the results, spotify plays a song from a playlist (spotify has already a bpm list). The gyroscope is to detect motion. For instance, if in a...

    $67 (Avg Bid)
    $67 Avg Bid
    15 bids

    I want someone to program 2 arduino's for me. One will register 4 pressure sensors, program them to recognize soft and hard touch. These values need to be transferred wireless to another arduino 300 meters apart of each other. Second arduino needs to translate the incoming data into different led lights lighting up.

    $205 (Avg Bid)
    $205 Avg Bid
    12 bids

    We are interested in creating a PC or tablet game that will work with an adduino joystick. As such developers experienced in working with Arduino and the Arduino IDE or other microprocessors are preferred. The game should be a 2-dimensional continuous running game that works with two joystick inputs. It should start with a user information section where name, age, and theme is chosen. There shou...

    $36 / hr (Avg Bid)
    $36 / hr Avg Bid
    17 bids

    I am looking for someone to create the electronics/coding portion of a project I want to do. I am building the woodshop portion of this project just fine, just need help with an electronics/coding. Basically - I am looking for a roulette / prize wheel. I have a circle, divided into 10 pie pieces. On each piece is a 12V LED. On the bottom, is a pushbutton momentary switch. When the button is pushed...

    $121 (Avg Bid)
    $121 Avg Bid
    11 bids

    need arduino code for programming node mcu as server client and send email it's one server and many clients

    $25 (Avg Bid)
    $25 Avg Bid
    17 bids
    $23 Avg Bid
    20 bids

    I want to build a model using Arduino for calculation of volume of water in a tank....i am doing it as a project to save wastage of water....i will start a test in my house..i need someone to build a prototype with sensor and readings with minimal error

    $26 (Avg Bid)
    $26 Avg Bid
    24 bids

    Make the .WAV file play directly from internet URL ([login to view URL]) with ESP32 and MAX98357 boards using Arduino IDE (no Pyton or JS) only. Will award to freelancer who can make a live demo of sound being played. Your bid message must contain the link to your demo. Use latest I2S library (use 'i2s_write' not 'i2s_write_bytes' !!!).

    $122 (Avg Bid)
    $122 Avg Bid
    9 bids

    We are looking for motivated individuals to work on an important startup robotics project (potential for a career path). The task is to create a custom API to translate conventional G-code commands to a custom motor configuration. Requirements: A notion and understanding of the inner workings of 3D printing. Highly experienced in motion planning for holonomic drives. Expertise in handling sensor ...

    $560 (Avg Bid)
    $560 Avg Bid
    2 bids

    I need to develope my python program about sorting and recycling the plastic bottles and pay back for the users. Program has cv2 based barcode detecting from webcam and serial connect with arduino to do the process.

    $162 (Avg Bid)
    $162 Avg Bid
    23 bids

    You will develop and test an “Arduino” sketch which will compile on the Arduino IDE and run on an ESP32 WROOM development board utilizing the ULP core to count interrupts and poll a INA219 sensor, while the main board is in deep sleep. This is part of a larger program, which collects different sensor information via I2C. This project is only to develop the deep sleep routines, to keep...

    $108 (Avg Bid)
    $108 Avg Bid
    6 bids

    Hello Mr. Karthikeyan, We are a small software developer firm in Turkey, Gaziantep and we need a hardware design of GPS unit in which quectel mc60 and atmel (arduino ide compatible) or stm32 series microcontrollers (arduino compatible uc's more preferred) will be used. We are 3 software developers and have little knowledge about PCB design, only designed small projects for our IOT projects. T...

    $100 (Avg Bid)
    $100 Avg Bid
    1 bids

    Need arduino code for sending email from node mcu.. ESP8266

    $22 (Avg Bid)
    $22 Avg Bid
    14 bids

    I need a nodemcu program compiled in aduino ide which can send an email to multiple email account with subject and body through g mail Subject will be a string variabe read from client read It should be a tested function in a very compact form

    $18 (Avg Bid)
    $18 Avg Bid
    4 bids

    I need the connections and the code to make that by connecting the aux of my phone it emits an alarm that wake me up at night, according to any notification that appears on my phone

    $37 (Avg Bid)
    $37 Avg Bid
    17 bids

    RFID attendance system for school admin can see each class attendance alone , and can see all school attendance admin can generate daily,monthly,semester report for each student and class users login to see time of arrival and leaving for their children and can write a note for the admin if the student is late or absent admin and users can send Emails to each other The whole idea is to cr...

    $154 (Avg Bid)
    $154 Avg Bid
    10 bids

    Looking for small functions/subroutines for Sensors/Buttons/Displays/EEPROM/RTC that can be added/subtracted for a bigger project as needed. Communication AP/LAN with Raspberry pi and/or hosted webpages. Most needed is fluent ESP32 using Arduino IDE to program. AP stand alone, station on LAN, comm to Raspberry pi hub and/or hosted web page. To prevent spam bidders, please start your proposal with ...

    $552 (Avg Bid)
    $552 Avg Bid
    25 bids

    Hi, I´m developing a VTOL Y FixedWing. I have the frame almost done, and everything else. I need someone who can program the PixHawk to takeoff and land automaticly on copter position. The UAV have to be hybrid between plane and copter, depending on the speed of the model. It has 3 rotors, one on the tail and two on the wings wich rotate 90º with a servo (Like in the picture). Video: [...

    $266 (Avg Bid)
    $266 Avg Bid
    4 bids

    DSP - Digital Signal Processing Guru Wanted I am looking for an Embedded programmer who can develop a DSP based PID Controller for a servo-motor. The PID Controller will be the heart of this project, it will some analog circuit but minor and will be provided. Data to the controller will be digital 16 bit SPI, motor feedback is 16 bits analog-level. Must know DSP and be able to write the code in C...

    $1114 (Avg Bid)
    $1114 Avg Bid
    33 bids

    I need some graphic design. I need to design a commemorative poster for our bands first gig. We have band logo and main character - however need to confirm details of date (Friday 30 Aug 2019, and venue (Servo Food Truck Bar, Port Kembla) other bands on the bill TBC.

    $20 (Avg Bid)
    $20 Avg Bid
    74 bids

    To use a proximity sensor and Arduino (or similar low cost board) to read the distance between the sensor and the flag and publish the readings expressed in mm via MQTT using WIFI connection. Requirements: 1. BOM 2. Electrical Drawing 3. Arduino sketch - to manage reading from the sensor and publish information using MQTT 4. Calibration procedure 5. Reading range - 3 mm 6. Accuracy - 0.05 mm 7....

    $184 (Avg Bid)
    $184 Avg Bid
    36 bids

    hi , i am looking for someone to build a prototype using arduino and android there is a weight sensor on arduino and connect the android mobile with bluetooth . the weight sensor will trigger event to android , the app will take a photo and send to firebase you need to prepare the app and the arduino

    $157 (Avg Bid)
    $157 Avg Bid
    24 bids