Arduino internet control jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    10,058 arduino internet control jobs found, pricing in USD

    the inductive sensor on arduinp will give its value 0 or 1 according to which servo motor rotates left or right

    $69 (Avg Bid)
    $69 Avg Bid
    10 bids

    I need some help with my business.

    $304 (Avg Bid)
    $304 Avg Bid
    9 bids

    ...currently assemble my PCB with components in house, and am looking to shrink the size of my PCB board. I currently use a custom designed PCB board (using Fritzing software), Arduino Pro Mini 5V 16MHz, Bluetooth HC-05, Pololu's Mini Pushbutton Power Switch with Reverse Voltage Protection, Sound Sensor with Adjustable Gain, On/Off push button, Micro USB

    $444 (Avg Bid)
    $444 Avg Bid
    25 bids

    It is a Program which uses an LCD and it controls 4 stepper motors depending in the diferent inputs of the sensors and LCD. More explanation in the attached documents. Joan

    $522 (Avg Bid)
    $522 Avg Bid
    20 bids

    I have a project that I have been working on and need a little assistance. I have an ESP32 board that I am working with as well as other components. Max6675 Mosfet TB6612 motor driver micro switch JGY-371 12V DC motor with encoder MT3608 DC - DC boost I have some of the code working but need some help putting it all together.

    $175 (Avg Bid)
    $175 Avg Bid
    19 bids

    ...Battery gauge (TI bq27441) It would be great to use ARM mbed OS as IDE of the choice for easy access to the hardware components mentioned above. Other suggestions (KEIL, Arduino) can be discussed. ---------- Input sources: A) MPU-9250/ICM-20689 - motion/info from dmp and recognized movement (Algorithms already exist!) B) MSP430FR - the capacitive

    $1711 - $3423
    Sealed NDA
    $1711 - $3423
    31 bids

    If you do not meet the below requirements, DO NOT APPLY: 1. Sr Level Xamarin Developer 2. Arduino Expereince 3. Must have all the components to build the breadboard and test (see components list below) 4. Build the board and deploy the Arduino code Project Desc: Phone App: Xamarin native IOS/Android Connect Bluetooth button Disconnect Bluetooth button

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    9 bids

    Have flowmeters attached to 2 beer taps, arduino tracks amount dispensed and displays amount of liquid remaining. Currently working fine however over time I'm getting ghost pours as the C02 settles in the line, making the keg tracking unreliable. Would like code introduced to the existing sketch to ignore any pours under 50ml.

    $19 (Avg Bid)
    $19 Avg Bid
    12 bids

    ...to this one here: [login to view URL] I have made a smaller clock and tested that my ARDUINO code is working perfectly, however I would like to add an external clock, a DS3231 to keep the time instead of the arduino Uno internal clock and I need help with changing the code so that it uses the external clock instead. I will

    $18 (Avg Bid)
    $18 Avg Bid
    13 bids

    Simple C coding of sensors using Arduino. 1) Sound sensor. 2) Motion sensor. Rewrite my program such that it looks nicer.

    $26 (Avg Bid)
    $26 Avg Bid
    15 bids

    i have parts like ultrasonic sensor and servo and inductive sensor i want to work together in different ways if inductive detect something give value 1 if not 0 if 1 rotate servo right 90 degrees reset pos. if 0 check ultrasonic for value that is 1 or 0 if 1 rotate left 90. and reset [login to view URL] 0 in ultrasonic sensor do nothing i want code to do this and an additional a meter using an ...

    $17 (Avg Bid)
    $17 Avg Bid
    3 bids

    I need a pcb design usin eagle. It is a shield for Arduino Pro Mini, The parts i am using: Arduino Pro mini Atmega 328mu Eeprom 24LC512 Rtc Ds1307 Xbee PRO I need the part size to be 1206 and the board size to be around 60mmx25mm

    $92 (Avg Bid)
    $92 Avg Bid
    17 bids

    I'm looking for somebody to give me some help running through and debugging an Arduino sketch. Looking to push my skills in the process, so would appreciate anybody who has or is looking to gain teaching experience.

    $81 (Avg Bid)
    $81 Avg Bid
    2 bids

    You must be familiar with Firebase and MKR WIFI 1010. Looking for Arduino Programmer to create a sketch containing local website to accept parameters from user, send https GET requests to server and communicate with Firebase to read and write parameters. The code must run on ARDUINO MKR WIFI 1010 (requests to switch to other boards will not be answered)

    $159 (Avg Bid)
    $159 Avg Bid
    6 bids

    I'm looking for somebody to give me some help running through and debugging an Arduino sketch. Looking to push my skills in the process, so would appreciate anybody who has or is looking to gain teaching experience.

    $29 (Avg Bid)
    $29 Avg Bid
    1 bids

    I would like to control the strength of 5 electromagnets using a PWM output from an Arduino. I need you to make an schematic and BOM for me; then I will do the prototype and test it. The magnet will need to be powered using an external power supply (12V power supply) I need you to use Altium Designer to make the schematic. Magnet Specs: Voltage:

    $28 (Avg Bid)
    $28 Avg Bid
    10 bids

    I'm looking for someone with a good knowledge of Arduino to remote in to my computer and help me finish a sketch this morning. I'm working with a Bare Conductive touch board (very simple set up all working fine). This has 12 electrodes, and each individual press plays a MIDI note. So that's all working well too. Where this needs to get to is: - Every

    $30 (Avg Bid)
    $30 Avg Bid
    7 bids

    For details please see [login to view URL] attached and other files LCD I use ( [login to view URL] )

    $193 (Avg Bid)
    $193 Avg Bid
    10 bids
    ESP8266: OLED library 2 4 days left
    VERIFIED

    I would like to use the SSD136 compatible OLED(128x64) with my ESP8266. I need a working library and example to use it with the NonOS SDK. I found some for the Arduino IDE but not for NonOS SDK maybe it´s possible to port one of the existing libraries: E.g.: [login to view URL]

    $44 (Avg Bid)
    $44 Avg Bid
    5 bids

    ONLY THOSE IN DELHI-NCR REGION WHO CAN TRAVEL TO GURGAON DAILY SHOULD APPLY! Need to create Arduino based devices in multiple compact form factors. The applicant needs to know how procure hardware, process of fabrication from national/international soruces, create the PCB himself, writing codes,, etc. . All schematics will be shared. Looking

    $619 (Avg Bid)
    $619 Avg Bid
    4 bids

    ONLY THOSE IN DELHI-NCR REGION WHO CAN TRAVEL TO GURGAON DAILY SHOULD APPLY! Need to create Arduino based devices in multiple compact form factors. The applicant needs to know how procure hardware, process of fabrication from national/international soruces, create the PCB himself, writing codes,, etc. . All schematics will be shared. Looking

    $1000 (Avg Bid)
    $1000 Avg Bid
    2 bids

    hello Im building filament extruder . rigth now I'm looking for someone who could write code for me to controll the whole extruder machine. It would be nice if we could design an PCB wich could controll heater bands , and spooling system ( winder ) of the filament ... someone could posibly do this?

    $556 (Avg Bid)
    $556 Avg Bid
    22 bids

    make a Arduino project and send it to me

    $140 (Avg Bid)
    $140 Avg Bid
    38 bids

    I like to hire Arduino Engineer who can integrate Arduino Uno with IR Sensors (2) with 7 Segment LED for a scoring control

    $81 (Avg Bid)
    $81 Avg Bid
    34 bids

    I have an Arduino Sketch that requires some additional code to perform the added functions that are required for my project.

    $23 (Avg Bid)
    $23 Avg Bid
    18 bids

    need guidance in designing and implementing a toy model in IOT style . An Arduino board will be implemented, functional description ,design and implementation. NEED GUIDANCE

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    33 bids

    Sketch 1 - DS18820 1 Wire temp. sensor to control two ssr relays on an Arduino Nano. Temp need to be displayed on an LED and relay on need to be indicated with led Sketch 2 - Optical water level to control 230 v ssr relay with Arduino nano. Software need to count the amount of water the pump connected to the relay will use and send warnings to thingspeak

    $158 (Avg Bid)
    $158 Avg Bid
    21 bids

    I am looking for someone who is familiar with working in EDF algorithm in FreeRTOS with periodic and aperiodic tasks combined. If you are the right persn for this ob, please do contact us, for further information.

    $30 (Avg Bid)
    $30 Avg Bid
    3 bids

    I am looking for someone who is familiar working with EDF algorithm in FreeRTOS for aperiodic and periodic tasks combined. If you are the right person for this job, please do contact us for further information.

    $32 (Avg Bid)
    $32 Avg Bid
    4 bids

    Hello, I have a Hardware ready with GSM, Lora, and ESP32. I need Software Developer to do coding for the same. I need a candidate to be Experienced in Arduino IDE, and Bootloader to AVR controllers. Should have the Previous experience in the following thing, LORA | GSM | ESP-32 | RTC | EEPROM | MQTT in AWS. Candidate from Gurgaon or from Delhi

    $481 (Avg Bid)
    $481 Avg Bid
    17 bids

    I wish to build upon this project (or similar): [login to view URL] The premise is to build this circuit but changing to a larger accelerator to measure up to 200g: [login to view URL] Following this, the data should be displayed visually on a LED bar of 20 LEDs, depending on the real time acceleration being measured, each LED will illuminate based on measured value being 10g for 1 LED, 20G for 2...

    $264 (Avg Bid)
    $264 Avg Bid
    19 bids
    Arduino #2 1 day left

    I am looking for someone to program my project. I would like to use an Arduino Nano, but I can also use an Uno if I have to. Besides the Arduino, it will have a 16x4 LCD, 5 Colored push-button switches, a relay, a learn switch ( you will have to tell me what kind of switch I will need for this), and an active buzzer. What I want is for the LCD to

    $148 (Avg Bid)
    $148 Avg Bid
    39 bids

    Hi there, I need someone to help me out with some simple Arduino code for a Bare Conductive Touch Board (therefore this work would probably be easier for somebody who owns one, although may well be possible without). I'm working with MIDI through GarageBand at the moment, using the Touch Board as a controller. The basic idea, is that when a user has

    $26 (Avg Bid)
    $26 Avg Bid
    6 bids

    I want to change this sketch to be able to run these displays. ([login to view URL]). I want it to shows time with 5 decimal places in seconds [login to view URL]

    $182 (Avg Bid)
    $182 Avg Bid
    23 bids

    ...length array of data from 24 Arduino Mega slaves. array length is 30 chars. Data from all slaves must be updated 3 times per second. Length of wire is 25 meters. Code for the master (PC) could be VB or C++ Or C# code for slaves in C Full communication error checking required. Full documentation for development purpose, 3 arduino is enough. your quote for

    $553 (Avg Bid)
    $553 Avg Bid
    35 bids

    Using an ESP32 board, wire the schematic and develop the code as specified. You MUST have all components available and able to assemble the breadboard, see the schematic below. Put the word "peach" in the first line of the response to show you have read the full description.

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    27 bids
    Arduino Project 18 hours left
    VERIFIED

    I'm looking to at putting together ant Arduino project. The first part is to guide me on what pieces to purchase, the second on how to put it together, and the third to code it to do what I wish. I've already purchased 2 Wemos D1 Mini's. Perhaps they are what I need or not, still not sure. I wish to measure the presence of voltage in a wire and

    $164 (Avg Bid)
    $164 Avg Bid
    27 bids
    Arduino sketch 13 hours left

    I need a simple arduino sketch. I need a timer to count down. From one hour. Adafruit backpack 7 segment Cut 4 wires in order. Trigger one relay for secession Trigger one relay for fail.

    $45 (Avg Bid)
    $45 Avg Bid
    1 bids

    I need a program for WINDOWS to communicate with Arduino using bluetooth, I need to connect to the Arduino, once i am connected i need to download the eeprom data to my pc and then clear the eeprom, Just a simple program with a couple of functions

    $166 (Avg Bid)
    $166 Avg Bid
    19 bids
    Arduino coding 10 hours left

    Hello, I am looking for an Arduino programmer to write a code for my project. The code should do the following: When receiving a specific SMS (eg: 'RelayON') -- but only if the measured voltage < 13.5 V -- the module should give 5V on a pin (eg. Digital pin 7) from Arduino board for a specific amount of time (eg: 5 seconds) - this will close a relay

    $154 (Avg Bid)
    $154 Avg Bid
    43 bids
    Makefile Help 8 hours left
    VERIFIED

    I need help making and compiling a simple Makefile that will be used for uploading a firmware for a Teensy Board (Similar to Arduino).

    $32 (Avg Bid)
    $32 Avg Bid
    6 bids

    This was project report writing about motor working on ultrasonic sensor using arduino UNO.

    $99 (Avg Bid)
    $99 Avg Bid
    9 bids

    ...Reset Which clears any error LED and buzzers Can this be multi use? press to clear error, hold to clear counters of requested and processed quantities? -Hard Reset From Arduino, will clear any stalls and restart the program Can we retain coil count?...

    $133 (Avg Bid)
    $133 Avg Bid
    4 bids

    hello i am creating hardware device using [login to view URL] i need some one to help me doing a software for me ill explain after choosing the expert.. please share any ...hardware device using [login to view URL] i need some one to help me doing a software for me ill explain after choosing the expert.. please share any projects u did in the past using Arduino and pozyx

    $1194 (Avg Bid)
    $1194 Avg Bid
    7 bids

    The task is to use the DS1337 as a clock a...Additional modes might be added in the future, like MAG3110 magnetometer and temperature display (from NTC). The microcontroller is ATmega328p with Arduino Pro mini bootloader. The design has UART connection to Arduino IDE, which should serve to adjust the real time clock. Schematic is in the attachment.

    $187 (Avg Bid)
    $187 Avg Bid
    20 bids

    ...Orlando) with all the resources you could imagine including a bank of 3D printers to make our ideas come to life. But I am open to working remotely if necessary. Requirements: Arduino coding experience, circuits, soldering and general knowledge of electronics is required. We're also in a passion to create, hunger to learn, reliability and someone okay with

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    32 bids

    i want building gripper with sensor So that it feels the desire in front of him and pick it up does not need to move f...building gripper with sensor So that it feels the desire in front of him and pick it up does not need to move from place It is important that the code is not copied from the Internet (Brand new work) and explained to me step by step

    $190 (Avg Bid)
    $190 Avg Bid
    19 bids

    We need someone with knowledge of electronics to build a circuit at our facility in Wadala, Mumbai. Should be ready to work at our facility. Should hav...knowledge of electronics to build a circuit at our facility in Wadala, Mumbai. Should be ready to work at our facility. Should have experience in building circuits and use of Arduino Microcontroller.

    $18 (Avg Bid)
    $18 Avg Bid
    11 bids

    Looking for to find someone who can create some code for me in Arduino IDE. What I am looking for is to have an ESP8266 connected to a DS18B20. The code needs to have Tzapu WifiManager. Wifi Manager will look after the variables for wifi network, password, thingsboard API key, time (deepsleep for X minutes). Let me know if you need more information

    $114 (Avg Bid)
    $114 Avg Bid
    24 bids

    I am looking for someone to program my project. It will have a 16x2 LCD, an RFID reader, six LED lights, and a buzzer.I wanted two buzzers but I'm out of outputs unless I can use the analogs for some of it. What I want is for the LCD to ask for an input & one or two lights to blink. Then when a FOB is read it will have more text telling what it found and different lights blink. I also nee...

    $181 (Avg Bid)
    $181 Avg Bid
    36 bids