Arduino motor counter jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    19,629 arduino motor counter jobs found, pricing in USD

    i need code that switches over tracking services...if gps shield does not have service use gsm sim longitude and latitude to update tracking...to MySQL database

    $6 / hr (Avg Bid)
    $6 / hr Avg Bid
    4 bids

    ...is relatively simple. I need a curcuit that can connect to a motor and reverse the polarity of the motor via a timer, such that the motor shaft moves clockwise when the polarity is not reversed, and after a specfic time has elapsed, the motor reverses polarity and the shaft moves counter-clockwise. This design is simillar to that of a curcuit in a garage

    $128 (Avg Bid)
    $128 Avg Bid
    7 bids

    ...level) -------- Parts of the project already exist on an arduino basis without bluetooth functionality and different components (e.g. DFPlayer Mini instead of vs1011e/vs1053b) so there is already some code existing and available that - beside the adjustments that are specific for Arduino (low power library, battery readings,...) and the different

    $1810 (Avg Bid)
    NDA
    $1810 Avg Bid
    14 bids

    I need an accurate code for arduino with no tons of adjusting and experiments. i need a good fast refresh to be able to accurate rpm up to 18.000 (4 stroke engine, motorcycle engine, via hall sensor from engine taken from the camshaft) simple as this.

    $20 (Avg Bid)
    $20 Avg Bid
    3 bids

    TX sending a signal to another board to trigger code when a button is p...pressed on the first. I am using [login to view URL] [login to view URL]

    $22 (Avg Bid)
    $22 Avg Bid
    3 bids

    making a rat trap with pir motion sensor and stepper motor on arduino uno

    $23 (Avg Bid)
    $23 Avg Bid
    6 bids

    controlling load cell on Arduino uno for controlling stepper motor and solenoid valve

    $22 (Avg Bid)
    $22 Avg Bid
    5 bids

    Creating a rat trap with pir motion sensor and stepper motor on arduino uno

    $13 (Avg Bid)
    Guaranteed
    $13
    0 entries
    CANbus analyse 5 days left

    ...unit. * Replicate/reproduce the relevant communication with the aid of an Teensy MCU and SN65HVD23x 3.3-V CAN Bus Transceiver. * Arduino Code to communicate with Instrumentation Cluster, ECU, Immobilizer and ABS unit. * Arduino Code to send the relevant data from Instrumentation Cluster to ECU to make the ECU start the engine without the cluster. * Ability

    $113 (Avg Bid)
    $113 Avg Bid
    3 bids

    Need to control motor rpm of motor with Hall effect encoder

    $35 (Avg Bid)
    $35 Avg Bid
    14 bids

    Need detailed cad drawing of oil pump casing for motor

    $84 (Avg Bid)
    $84 Avg Bid
    63 bids
    Counter argument 5 days left

    800 words. Counter argument Have a topic

    $33 (Avg Bid)
    $33 Avg Bid
    15 bids

    The aim of this project is to design a platform to optimally estimate blood pressure using live ECG (Electrocardiogram) and PPG (Photoplethysmogram) based on PTT (Pulse Transit Time) and wavelet transform and Nueral Network for accuracy. The proposed platform is expected to be user friendly and cost-effective compared to existing devices.

    $51 (Avg Bid)
    $51 Avg Bid
    8 bids

    I want a 1 axis stepper motor slider with micro switching. It will be use in interview, so it must be very quiete. Just able set speed and thats it. It will be going forward and reverse in endless loop. AccelStepper library will be helpful i hope so. Components: Ill be using stepper motor nema 17 TMC Silentstepstick driver - for quietness. KY-040

    $24 (Avg Bid)
    $24 Avg Bid
    2 bids
    parse server arduino uno 5 days left
    VERIFIED

    Parse server arduino sdk [login to view URL] [login to view URL] Hello, parse server is located in arduino yun sdk library. I want this library to be recompiled as arduino uno. arduino yun convert to arduino uno library run and test the library

    $152 (Avg Bid)
    $152 Avg Bid
    5 bids

    ...cloud. 7- Ability to view Expenses Dashboard. 8- Ability to view and export log sheet. In all the app must: 1- Help users select expenses category or type - Fuel, Grocery, Motor Vehicle Expenses, Fashion, etc... 2- Help users take photo of receipts. 3- Help users save info to cloud. 4- Help users view all info recorded in a dashboard format. 5- Help

    $1252 (Avg Bid)
    $1252 Avg Bid
    47 bids

    The project is to build a toy car using Arduino, 4 ultrasonic sensors and IR sensor as speed encoder. The car must be able to measure the distance between 2 cars and decide to keep moving if the distance is less than the width of the car. The second case space is larger than the width of the car but less than the length, the car will park normally.

    $518 (Avg Bid)
    $518 Avg Bid
    30 bids

    a research in level of injury of motor vehicle crashes

    $387 (Avg Bid)
    $387 Avg Bid
    25 bids

    12v 2amperes DC light is connected to [login to view URL] i trigger the relay, Arduino is disconnecting from wifi ,mqtt and restarting .I need a freelancer with experience in Arduino and electronics to help me.I will share the project details in chat.

    $36 (Avg Bid)
    $36 Avg Bid
    18 bids

    Please see attached for brief of the project. This is prototype job that will form the base of a larger more feature rich multi user app. Key details - Android Native App - Must post to Social Media (Whats App, Facebook, Twitter) seemlessly without user intervention. - Must store data in cloud for access and retrieval by others. Note also its an refinement from previous job listed that will not ...

    $296 (Avg Bid)
    $296 Avg Bid
    19 bids

    I need to control induction heating with Arduino and need to connect load cell to Arduino and read the reading and control solenoid wall or stepper motor when desired weight is achieved .

    $140 (Avg Bid)
    $140 Avg Bid
    17 bids

    We need Graphical Programming IDE for Arduino please find the attached link for better understand [login to view URL]

    $288 (Avg Bid)
    $288 Avg Bid
    5 bids

    I am working on a project. I that i have to get blood pressure with the use of ECG and PPG. With the use of arduino uno and AD8232 And matlab and wavelet transform. I have to do tha NN for accuracy. check the research paper below

    $62 (Avg Bid)
    $62 Avg Bid
    6 bids

    We need to create a android app that can connect with arduino Bluetooth module and grab 4 sensor data by using separate buffers (pH, Turbidity, Conductivity, Temperature) and display them on the application interface. We can provide the whole arduino code, you need to build the android Bluetooth application

    $158 (Avg Bid)
    $158 Avg Bid
    28 bids

    NEED DOWNLOAD PLUGIN FOR MEDIA FILES ALSO need my counter fixed on player

    $23 (Avg Bid)
    $23 Avg Bid
    12 bids

    This school competition we need support for Black and wight Line follower robot and object detecting color detecting pick and place using arduino

    $134 (Avg Bid)
    $134 Avg Bid
    14 bids

    i need to receive SMS message like on and have it start and stop function on my arduino nano...have sms code working but my issue is i also use the sim800l to send http request so when http is sending request it wont work.

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    6 bids

    ... GPS module, 3G/4G USB modem and RPI camera. RPI soft counts incoming and out coming people under the camera, the counter have to determine people who go close to each other (without distance). It is going to work like a head counter. Parts of project: 1) People counting (recording statistic data with time and date markers) + video recording on

    $847 (Avg Bid)
    $847 Avg Bid
    13 bids

    ...designing a smart parking system with arduino . i wrote the code for the arduino and i did the circuit but it does not work . i test each components and it works fine but i'm not sure that the Arduino code is correct . maybe i missed some important thing or the order is not correct . The project idea and arduino code has been uploaded. i need to make

    $228 (Avg Bid)
    $228 Avg Bid
    3 bids

    i need a webservice to be written in PHP (laravel would be preferred) with the following characteristics: - needs to accept JSON format with social links (spotify followers, spotify playlist followers, facebook fans, instagram followers, twitter followers, youtube subscribers) - needs to decode the JSON, calculate followers from the links given, and return the number of followers in JSON - in the ...

    $200 (Avg Bid)
    $200 Avg Bid
    25 bids

    Robotics workshop using arduino

    $84 (Avg Bid)
    $84 Avg Bid
    8 bids

    small correction like correcting motor ,selcting new motor ,arranghment of parts

    $122 (Avg Bid)
    $122 Avg Bid
    29 bids

    The project includes coverage of upcoming auto show to be held at Pasay City, Manila, Philippines : Philippines International Motor Show 2018 Philippines International Motor Show 2018 is being held from 24th to 28th October 2018. Event venue and time details are as given below : 24th - 28th October 2018 (Freelancer will need to cover first 2 days

    $98 (Avg Bid)
    Local
    $98 Avg Bid
    7 bids

    wanna create a backend module to view a summary of all the categories (motor, classified, property, job, and community) in an organized way all the data can be pulled from the existing website The logo can be pulled from the user account avatar this field can be edited from the backend GPS will be captured when a user registers an account (do it with

    $34 (Avg Bid)
    $34 Avg Bid
    20 bids

    See attached code. The simulink file and parameters file is set for 5 state variables and for a motor state space model. I want to modify this to my state-space model of kalman filter for fundamental component estimation. You dont have to worry about theory of Kalman filter. I just you to modify the simulink to work with my provided matrices A and

    $37 (Avg Bid)
    $37 Avg Bid
    10 bids

    ...Program an Arduino and (1) provide the code, as well as the (2) wiring diagram, to instruct a stepper motor to rise via remote, then lower upon receiving a signal from a sensor or within a certain timeframe if the sensor is not triggered. Device Functionality: The device will raise and lower an arm 90 degrees using a gear attached to a stepper motor. The

    $152 (Avg Bid)
    $152 Avg Bid
    22 bids

    Integrate arduino with grade sorter app(app provided) to automatically sort inventory on assembly line. Grade Sorter app is in C#.

    $532 (Avg Bid)
    $532 Avg Bid
    8 bids

    Hello I am the owner of next Age cycles. I'm looking to have 3 custom pcbs made. The first one is for a brushless motor controller that will have many extra features and run about 200amp high voltage. Also need a BMS for a lithium ion. And I also need a display screen to go along with all of this and have them communicate with each other. More information

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    26 bids

    I want 3 discreet outputs on an adjustable timer schedule(using milli i suspect). The output signals will activate independent relays. For example: one signal may activate every hour for 3 minutes. Another function will send 2 signals every 3 hours for 4 minutes.

    $23 (Avg Bid)
    $23 Avg Bid
    4 bids

    I am carrying out an 3 phase AC motor project. This project will contain 4 AC motors each with a VFD to control speed (frequency) and torque (voltage) via pwm input from a micro-controller (Arduino DUE). TASK: I need well commented arduino code and connection instructions (reference ports from arduino and VFD schematics) in a quick turnaround

    $165 (Avg Bid)
    $165 Avg Bid
    16 bids
    opencv people counter 1 day left
    VERIFIED

    People counting system using Raspberry Pi units with camera modules, running OpenCV. The unit need to be able to communicate with a server on the same LAN, and counting information needs to be available for simple calculations to be performed.

    $236 (Avg Bid)
    $236 Avg Bid
    18 bids

    I need to read the serial communications from a GPS NEO 6M card on a Arduino GSM 1400. GSM 1400 cannot use SoftwareSerial so you would need another method. Project will be an .ino Arduino file.

    $143 (Avg Bid)
    $143 Avg Bid
    7 bids

    My Company is renewing the website and we want to have some eye-catching technical/commercial descriptions of our testing machi...descriptions. We don't only need a technical Team, but someone who can write appealing illustrations of our products. We design and manufacture testing machines to test the electric motor in its parts of in its completeness

    $439 (Avg Bid)
    $439 Avg Bid
    31 bids
    write blogs 1 day left

    hi you have to write blogs, webpages, and article for motor insurance............ New freelancer are welcome

    $98 (Avg Bid)
    $98 Avg Bid
    18 bids

    control of mobile robot through matlab arduino interface using image processing as input command

    $25 (Avg Bid)
    $25 Avg Bid
    2 bids

    I work in the electric, electrotechnical and electromechanical sector and I need an eye-catching paper work about Partial Discharge, what they are and their use i...work in the electric, electrotechnical and electromechanical sector and I need an eye-catching paper work about Partial Discharge, what they are and their use in the Electric Motor testing

    $216 (Avg Bid)
    $216 Avg Bid
    6 bids

    ..."1FrederickGrant"; String bikeMake = "Yamaha"; String bikeType = "R1"; String bikeColor = "Silver"; int bikeYear = 2004; these or the variables I am passing Arduino uno + sim800l this is what sends them I know my php code works because it updates them when I type them in the url if you cant do in a couple hours please do not bid I do...

    $35 / hr (Avg Bid)
    $35 / hr Avg Bid
    9 bids
    Arduino Project. 20 hours left
    VERIFIED

    i have some work in Arduino and i need an expert for this, details of project will be shared in chat thanks

    $23 (Avg Bid)
    $23 Avg Bid
    33 bids

    Hi I want to make a kind of laser carving machine. But It is little bit different f... So when turning on the machine, It should automatically start to draw a drawing that I order in advance. SO I want to hire coder to code arduino program to controll the move of X and Y axis step motor and the timing of Laser shooting at the panel. Thank you

    $259 (Avg Bid)
    $259 Avg Bid
    13 bids
    Arduino sketch 14 hours left

    Hi, I'm looking for someone to wright an arduino sketch. It would incorporate 2 sensors (temp,Ph) and clock, each to trigger outputs at defined values

    $139 (Avg Bid)
    $139 Avg Bid
    11 bids