Atmega328p pcb design jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    12,405 atmega328p pcb design jobs found, pricing in USD
    LED Driver Controller 18 hours left
    VERIFIED

    We have designed an LED driver PCB that we need to finish writing firmware for. We need to take in digital and analog inputs and send SPI signals to the LEDs.

    $50 / hr (Avg Bid)
    Local Urgent NDA
    $50 / hr Avg Bid
    1 bids
    pcb design 6 days left
    VERIFIED

    Looking for a great Electronics engineer to design a pcb. components involved include a servo motor, stepping motor, light sensors, and thermal heaters.... Thank you!

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    21 bids

    I work for a company that uses a lot of FAMOCO fx100 devices, and we need a new charging solution, I'm looking to design a 10 battery charge box. a possibly 3d printed box with a smart charging circuit that will stop feeding the batteries when they are full. that i can plug in 10 batteries at the time with LED indicators for full batteries. i dont need the product actually built, just the pc...

    $307 (Avg Bid)
    $307 Avg Bid
    16 bids
    PCB Design 6 days left
    VERIFIED

    We are looking for a PCB design that will act as a timer and display the current time on a tv / monitor screen. The feature of the board will be as follows: 1. Timer is started by a push button 2. The active time is displayed on a tv / monitor screen upto 40", preferably via HDMI connection 3. The timer is stopped using a second push button 4. The timer is reset by holding either the start /...

    $240 (Avg Bid)
    $240 Avg Bid
    22 bids
    FPGA unit phasor measurements 6 days left
    VERIFIED

    First task will be to use the xtal oscillator board that I designed and that works, together with the FPGA to read the GPS data and then synchronise the 40 MHz Voltage Controlled Xtal oscillator to the 1 second pulse produced by the GPS. That is called a frequency loacked loop The second part of the project task is to populate the ADC and final amplifier stages on the PMU PCB, together with power...

    $200 (Avg Bid)
    $200 Avg Bid
    3 bids

    This is s DIY project which could lead to next steps of development so it's a long term contract - we are looking for a PCB design (compact) which needs to be powered using LiPo rechargeable battery, it should have an onboard memory chip, Bluetooth enabled and MIPI connector. I want to connect our 1.39" display on this PCB without using any wires. We currently have a PCB which has 2 inte...

    $658 (Avg Bid)
    $658 Avg Bid
    16 bids

    We are an active company in Heating Ventilation and Air-conditioning company which is leading in installation of HVAC systems and servicing for customers in Central part of Europe. We need experienced Hardware engineer for schematic verification and supporting PCB design. This project includes 1) scope of optimizing Power supply sections (AC-DC, DC-DC converters) to drive loads of HVAC devices upt...

    $451 (Avg Bid)
    $451 Avg Bid
    8 bids

    * concerns an extension for a microcontroller * 4 layer pcb design with high speed signals (hdmi) * demonstrable experience required * small circuit board (100 x 50 mm) * preferably drawn in eagle * BOM, PCB footprints, PCB layout, schematics available (has to be dubble checked) * circuit board contains; • two hdmi connectors and an IC: drawing schematics and routing high speed signals •...

    $109 (Avg Bid)
    $109 Avg Bid
    8 bids

    Hi Dmytro S., I noticed your profile and would like to offer you my project. I had a PCB designed that replicates portions of an existing commercia PCB. I need some to check that the design is correct and will function correctly if I have it manufactured.

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids
    SMPS teach 5 days left

    Hello, Teach me SMPS, I have uploaded file. Teach me how this schematic works,how smps works,help in PCB design

    $124 (Avg Bid)
    $124 Avg Bid
    5 bids

    Looking for experts who can make us win. I need something extraordinary to prove yourself. Need the awesome work in low prices but professional way. At last I also need a documentary on the whole project which include everything like codes,PCB layout and all others. I will also say that I prefer arduino and IOT but waiting for other suggestions also.

    $4566 (Avg Bid)
    $4566 Avg Bid
    11 bids

    Need two PCB for a Ardrino Pro Mini project. 1. PCB will have two relays and a small power supply module. 2. PCB will have an Ardrino Pro Mini module a, small LCD SPI dislpay, light sensor (TEMP6000), 3 Tactile Switches, output for LED light strips( 2x2pin Connector), 6pin connector for power and I/O. Will use already made Ardrino module an also for the Power supply module. You will need to h...

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    30 bids

    Hello, this is the task: "first task will be to use the xtal oscillator board that I designed and that works, together with the FPGA to read the GPS data and then synchronise the 40 MHz Voltage Controlled Xtal oscillator to the 1 second pulse produced by the GPS. That is called a frequency loacked loop. We will talk about the details of that on Monday. I have attached the schematic for the PC...

    $339 (Avg Bid)
    $339 Avg Bid
    7 bids

    Hello, this is the task: "first task will be to use the xtal oscillator board that I designed and that works, together with the FPGA to read the GPS data and then synchronise the 40 MHz Voltage Controlled Xtal oscillator to the 1 second pulse produced by the GPS. That is called a frequency loacked loop. We will talk about the details of that on Monday. I have attached the schematic for the PC...

    $221 (Avg Bid)
    $221 Avg Bid
    8 bids

    Arduino is a popular open-source development board used by engineers, hobbyists and makers to develop electronic projects and prototypes in an easy way. The Arduino platform consists of many development boards like Arduino UNO, Arduino Nano, Arduino Mega, Arduino Pro Mini etc.. all of which are based on the series of AVR microcontrollers. The below list consist of a large collection of free Ardui...

    $369 (Avg Bid)
    $369 Avg Bid
    13 bids

    Hi I am looking for assistance in designing a simple electronic device that provides GPS location on pressing a button. The device needs to be linked to a back-end database that provides information of the owner of the device. The key priorities would be the PCB, outer design and finally casing. Regards, Hiten

    $140 (Avg Bid)
    $140 Avg Bid
    27 bids
    IoT device 4 days left

    IoT device consists of 1xMCU, 1xAccelerometer, 1xGPS and 1xNarrowband modules and a battery. We already have circuit schematics and PCB for the 1st prototype. We need someone with deep hardware knowledge to check our circuit design, optimise for the lowest current consumption and best PCB layout.

    $192 (Avg Bid)
    $192 Avg Bid
    46 bids

    I need PCB design (including schema, manufacturing/assembly files, and all source files) for a small set-up. Esentially the PCB board in question is just routing connections from other (existing) boards, providing cross-connectivity of sensors/motors/boards, master-switch functionality, power input/distribution and drop-down of voltage. onsisting of two voltage ratio sensors, two bipolar stepper m...

    $186 (Avg Bid)
    $186 Avg Bid
    37 bids

    Looking for experts who can make us win. I need something extraordinary to prove yourself. Need the awesome work in low prices but professional way. At last I also need a documentary on the whole project which include everything like codes,PCB layout and all others. I will also say that I prefer arduino and IOT but waiting for other suggestions also.

    $3904 (Avg Bid)
    $3904 Avg Bid
    23 bids

    REQUIREMENTS: A fully functional PCB design that allows for connecting 2 LiPo batteries (3S/4S DC 11.1V/14.8V) as power sources in order to power multiple components with different voltages and provide a way to monitor and cut off each battery individually via I2C. Board should ... - ... have the following inputs: -- 2 x DC 11.1V/14.8V XT60 male connectors, for connecting 2 LiPo with XT60 fema...

    $191 (Avg Bid)
    $191 Avg Bid
    16 bids

    This battery charger has to be designed with a TI BQ24232 IC, [login to view URL] It must be designed to charge the following battery safely, [login to view URL] The charger can only have a single micro usb input to charge the battery as well as power a circuit consisting of a MCU and an e-paper module screen.

    $103 (Avg Bid)
    $103 Avg Bid
    29 bids

    I want a electrical shematic and PCB design for an electrical outlet 120 volt. The outlet will have a 3.5 mm jack port in front. The outlet need to have a 20 amp relay and be activated by the jack connector. This will be a magnetic sensor connected to the jack.

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    32 bids

    Hi, I am looking for a expert seo freelancer who work with me to bring the site on google top results. Only expert please No black hat techniques Only quality link building Only bid if you are good in seo. I need website top on google search results and local maps also. The website is related to pcb manufacturing and assembly. Must diversify anchor text More details will be provided after award. N...

    $86 (Avg Bid)
    $86 Avg Bid
    65 bids

    I need someone who can make code for a magnetic stripe reader, and numeric keyboard,, so that it will log all magnetic stripe data and keyboard data and save it in flash memory, so afterwards it will be accessable with either usb connection or bluetooth connection using ATCOMMANDS to communicate. I want to use ATMEGA Microcontroller with a custom made PCB, or a PIC,, I have codes for magnetic ...

    $487 (Avg Bid)
    $487 Avg Bid
    17 bids

    I want to engage someone to recommend suppliers, components and designs for a pinhole security camera for a nanny cam. You'll suggest the individual parts (camera lens, PCB, motion detection, wifi unit). You may also - depending on skills and next steps - Help with designing the PCB to control the camera functions Work with an industrial designer to design the final product (including ...

    $633 (Avg Bid)
    $633 Avg Bid
    12 bids

    I would like to make a mini PCB to easily interface with a motorized PCB via empty through hole slots for hand soldered cabling. I would like this accomplished in EagleCAD. Datasheet: [login to view URL]

    $116 (Avg Bid)
    $116 Avg Bid
    37 bids
    lab technician 2 days left

    Openings for Lab Technician: Company : Sang Semiconductor , Bangalore, India Designation : Lab Technician Location : Bnagalore (Clint location) Job Requirement : ITI / Diploma. 2 + Years of experienced into Cable Harness, subracks wiring and PCB assembling.

    $8 - $21
    $8 - $21
    0 bids
    Technician 2 days left

    looking for an expert, who have good experience in soldering PCB devices

    $17 (Avg Bid)
    $17 Avg Bid
    4 bids

    I'm working on a project using an Arduino uno, 4 x seven segment display, rtc module. I need code that will count the number of days my girlfriend and I have spent together in a continuous loop the date being 10.12.2017 I've uploaded a sketch of the hardware used and the configuration // pinout is for PCB layout int digit1 = 2; //Pin 12 on my 4 digit display int digit2 = 3; ...

    $22 (Avg Bid)
    $22 Avg Bid
    4 bids
    PCB Design 1 day left

    Use the xtal oscillator board that I designed and that works together with the FPGA to read the GPS data and then synchronise the 40 MHZ Voltage controlled Xtal oscillator to the 1 second pulse produced by the GPS. I will provide more details on chat.

    $156 (Avg Bid)
    $156 Avg Bid
    17 bids

    i have a not exactly alexa but similar to alexa. i need complete PCB design and firmware with App. i will share further details in chat. Place bid only if you have worked on alexa before.

    $23 (Avg Bid)
    $23 Avg Bid
    4 bids
    MCU with IOT 19 hours left

    The project will consist of creating a pcb with an arm and sigfox.

    $180 (Avg Bid)
    $180 Avg Bid
    22 bids

    We need a PCB design and 3 manufactured prototypes of a small clock circuit board (~5 cm x ~4 cm). We will provide a standard 10 Mhz OCXO for the board (AOC2012VAJC-10.0000C). The output should be 52 Mhz, with slight adjustments from a POTS trim supported by the OCXO to achieve better than 0.1 ppm precision (verified against GPS clock or cell network frequency timers). The circuit board output...

    $2351 (Avg Bid)
    Featured
    $2351 Avg Bid
    25 bids

    I am looking for a Senior Electronic Engineer with PCB design and firmware development for my building my prototype. my prototype is a USB device. so a man/woman must have experience USB device design and firmware. It is better to have Bluetooth and Wifi skill. I am waiting good proposals. Thanks.

    $1147 (Avg Bid)
    $1147 Avg Bid
    37 bids

    I have a task similar to Alexa, i need PCB design. looking for expert Electrical&Electronics engineer to do this work for me. will share further details in chat

    $27 (Avg Bid)
    $27 Avg Bid
    17 bids

    Hello, We are a start-up working on implementing Wireless Power Technology (WPT) in Kitchen Appliances like Juicers, mixers, toasters, skillets etc etc, through the technology of induction. We are looking to hire a professional, with experience in taking an Idea -> General Product Design -> Prototyping->Advanced Product Design with a design for manufacturing and assembly. Ideal candid...

    $306 (Avg Bid)
    $306 Avg Bid
    70 bids

    I made a smll PCB design and my producer needs it to import to Altium designer. I want somebody who can convert it until he can import free of errors.

    $25 (Avg Bid)
    $25 Avg Bid
    2 bids

    Hi Vijay Anand R., I noticed your profile and am new to freelancing work. I also lok for pcb work . Can I contact you through mobile to get some guidance? Thanks, Selvarani

    $251 (Avg Bid)
    $251 Avg Bid
    1 bids

    We are a young company and looking for someone who can create us a 3d rendering / image. We developed a PCB/Electronic which can be placed inside bags, wallets, suitcases, etc. This rendering should show our PCB integrated in a backpack of a certain brand. We already made such an image for a wallet as an explosion drawing but now we need this for a backpack. The 3d model of the pcb exists and ...

    $133 (Avg Bid)
    $133 Avg Bid
    39 bids

    Hi Tung. Minh la Quan, hien dang co 1 project lien quan den schematics design va PCB. Neu Tung co facebook mesenger thi cho minh nick nhe, we should have a call. Minh de $10 la [login to view URL] trung thoi, minh se discuss about budget later.

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    We have developed a Sigfox circuit board using the SAMD21 and a sigfox module. Although this is a standalone board we are using the Arduino bootloader (the Arduino M0 using the SAMD21 chip) as some of our libraries were previously developed for the ATMEGA328 and we want to reuse those. We would like to get the power consumption down very low (the application note says that with the RTC we should ...

    $246 (Avg Bid)
    $246 Avg Bid
    17 bids

    I want to create a 2 layer version of an existing small 4 layer PCB (28x28mm). First job would be to check if this is possible. Good routing knowledge would be appreciated. I want to split the jobs in 2 milestones: 1st: check possibilies, disadvantages. Discuss possible solutions 2nd: Finish PCB design and provide documents like 3D file, Assembly drawing top/bot (PDF), Shematic (PDF). Unfortunatel...

    $90 (Avg Bid)
    $90 Avg Bid
    20 bids

    Looking for some who has experience in successfully completing vehicle location tracker based on IRNSS constellation using skytraq or Quecktel modules interfaced with accelerometer, memory to store 40k logs, open CPU or micro controller based design and AIS 140 communication protocol. Project includes vehicle tracker hardware design and development including PCB design and firmware coding, prototy...

    $945 (Avg Bid)
    $945 Avg Bid
    8 bids

    Looking for some who has experience in successfully completing vehicle location tracker based on IRNSS constellation using skytraq or Quecktel modules interfaced with accelerometer, memory to store 40k logs, open CPU or micro controller based design and AIS 140 communication protocol. Project includes vehicle tracker hardware design and development including PCB design and firmware coding, prototy...

    $785 (Avg Bid)
    $785 Avg Bid
    5 bids

    Design of PCB to be used in an e-cigarette with firmware for MCU

    $147 (Avg Bid)
    $147 Avg Bid
    18 bids

    Hello, I am in electronic engineer and also know pcb designing ,along with very good embedded c knowledge. I want to build a 3 phase energy meter and single phase energy meter , Microcontroller to be used for ADC measurement will be atmega328pb. I will buy all the components , make the pcb , understand your circuit , write the software , build the transformer ,etc . I just need guidance from so...

    $125 (Avg Bid)
    $125 Avg Bid
    10 bids

    we noted in Section 2.5, the power amplifier designis based on a Melexis application note ([Mel04]), recallFigure 3. We used the output stage of the TI S4100 readermodule in the base board to drive the power amplifier in-put. We did not invest any effort in impedance matchingsince the power amplifier input is voltage driven. Wemanufactured the PCB for the power amplifier using thesame technique as use...

    $16 (Avg Bid)
    $16 Avg Bid
    5 bids

    modify PCB schematic, layout, gerber, and 3D files.

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    44 bids

    We are a young company and looking for someone who can create us a 3d rendering / image. We developed a PCB/Electronic which can be placed inside bags, wallets, suitcases, etc. This rendering should show our PCB integrated in a backpack of a certain brand. We already made such an image for a wallet as an explosion drawing but now we need this for a backpack. The 3d model of the pcb exists and ...

    $129 (Avg Bid)
    $129 Avg Bid
    29 bids

    Looking for individual/team sound in RFID module development, micro-controller based PCB/circuit designing, embedded software/ firmware coding to work on our RFID based driving testing track project. Only experienced individual/team with requested skills need to apply.

    $877 (Avg Bid)
    $877 Avg Bid
    13 bids