Atmel arm tutorial jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    11,826 atmel arm tutorial jobs found, pricing in USD

    I want to create a logo that incorporates a shoulder and arm into the initials for the Galway Shoulder Institute (GSI) and Galway Shoulder Center (GSC). I would choose the best design that best incorporates the shoulder and arm into the logo. I have provided a few examples from the Dublin Shoulder Institute (DSI). Thank you Needs to be in a format

    $230 (Avg Bid)
    Guaranteed
    $230
    0 entries

    What I need is Keyboard-operated safe (enter code at keypad to lock / unlock) Need to program using atmega 1281 in Atmel Studio. And Simulation running in Proteus. A programming language is " C ". LED/LCD display to show digits when pressed in 4X4 keypad. when entering pre-defined key in keypad switch/lock needs to be unlocked or switch is ON and

    $124 (Avg Bid)
    $124 Avg Bid
    6 bids

    I have a picture that needs two fixes done to it. 1. put extra hair over the arm that goes into the neck (disguise the arm) 2. extend the print of the shirt to cover the other hand at the bottom of the frame.

    $15 (Avg Bid)
    $15 Avg Bid
    39 bids

    ...Rule Mining (ARM) algorithms, their inability to mine numerical data without first converting them into categorical ones. Discuss its issue and critically review at least two important research articles. Identify a publicly available dataset for ARM. Evaluate and explain the chosen dataset. Construct an ARM model by applying an appropriate ARM node. ( Required

    $59 (Avg Bid)
    $59 Avg Bid
    16 bids

    Hello, We have to make 102 virtual cases back and frond (total 204) in 4 brands so 4 PSD in final. I will give you the TUTORIAL + PNG about phones. We will give 180$ for this job no need to be good in photoshop. Thanks

    $100 (Avg Bid)
    $100 Avg Bid
    12 bids

    Software programming for ARM processor

    $45 / hr (Avg Bid)
    $45 / hr Avg Bid
    3 bids

    The requirement of the essay is as below. This essay is required to be published on a website. One common issue with most traditional Association Rule Mining (ARM) algorithms (e.g., the Apriori node) is their inability to mine numerical data without first converting them into categorical ones. Write a two-page research essay to discuss this issue

    $43 (Avg Bid)
    $43 Avg Bid
    29 bids

    I need a tutor who has read and can explain key passages and code examples taken from McElreath's Statistical Rethinking, Murphy's Machine Learning a Probabilistic Approach and Rasmussen's Gaussian Processes. I want to interact asynchronously (not through videoconferences), so I'd like to find someone who can provide written answers to questions I send by email.

    $39 / hr (Avg Bid)
    $39 / hr Avg Bid
    11 bids

    ...creates a video on CSS. Please, PM demo video which created by you and the details of the software which you are using for recording and editing. Remember all rights on this Tutorial are going to me and you have to share all the files. Please go through the below contents for Videos I am looking for CSS Introduction CSS Online Training - Home Introduction

    $208 (Avg Bid)
    $208 Avg Bid
    2 bids

    ...development using in OOD, TDD, ATDD • Good at C / C ++ Python programming languages for embedded systems software • Good background with Microprocessor and Microcontrollers (ARM, PIC, 8051, etc.) and development tools (GNU GCC, IAR, ICE, etc.). • Experience with Embedded OS (Linux, FreeRTOS) is an advantage • Understand electronics circuit design, development

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    21 bids

    Quality work in minimum time resulting to low costs of the components in the feild of process equipment is the main reason to enter automation.

    $2076 (Avg Bid)
    $2076 Avg Bid
    1 bids

    ...Originators - Because, presentation matters! - This vertical provides HR, Placement services and Creative services. [login to view URL] Publicatus - Beyond Books! - This is the publication arm of CBS Ventures. This vertical provides book publishing with some unique concepts. 5. CBS Commercio - Experience the Art - This is the E-Commerce division of CBS Ventures. This

    $88 (Avg Bid)
    $88 Avg Bid
    27 bids

    I need you to develop some software for me. I would like this software to be developed.

    $21 - $173
    $21 - $173
    0 bids

    I need you to develop some software for me. I would like this software to be developed for Windows using C or C++.

    $850 (Avg Bid)
    $850 Avg Bid
    1 bids

    We require a professional to create screen capture videos with tutorials for our application. The project will require insertion of text with voiceover to guide users on how navigate through screens of various modules. This is a long-term project and each module must be completed within a few days, the creator will not retain any rights whatsoever to finished work. The creator will also be require...

    $169 (Avg Bid)
    $169 Avg Bid
    28 bids
    Tutorial DSP- 3 days left

    An advanced paper need to UNDERSTAND the MATH in it with DETAILS .. Example WM Regression Estimate .. - Maths- Electrical

    $146 (Avg Bid)
    $146 Avg Bid
    27 bids

    Hi there, Video Tutorial Creation about 3D Modeling Animation Unity Unreal Engine and more I pay for that so all rights on this Tutorial are going to me. You automatically agree as soon as you take the job Contact me if you are interested!

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    12 bids

    Hi there, your Job is to create Video-Tutorials about one of this Topics: PHP CSS HTML5 MySQL and more...I pay for that so all rights on this Tutorial are going to me. You automatically agree as soon as you take the job Contact me if you are interested!

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    12 bids

    Hi there, your Job is to create Video-Tutorials in one of this Topics: Maya 3ds Max Cinema 4D Blender Photoshop Illustrator and more...I pay for that so all rights on this Tutorial are going to me. You automatically agree as soon as you take the job Contact me if you are interested.

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    9 bids

    I have a tattoo that is almost done on my arm and want to continue with something related up towards the shoulder. I need to have a similar picture with i already got tattooed.

    $32 (Avg Bid)
    $32 Avg Bid
    11 bids

    I need a mobile application where...measurement, the whole body is not necessarily needed. Just some specific parts like the hip, Waist, shoulder length, length from base of leg to waist, from waist to under the arm, arm length, neck, wrist. The app should have the ability to also get these measurements itself from the image during/after the capture.

    $640 (Avg Bid)
    $640 Avg Bid
    34 bids

    A total of 6 short videos less than one minute for Instagram, Facebook and the website. Videos range from 45 seconds to 75 seconds in length. After Effects template provided. Screen Captures of actions are provided. Script and Demo VO provided. Sample Idea of what we like linked here: [login to view URL] After Effects Template Linked here: [login to view URL] App for parents. Like offer up and ...

    $121 (Avg Bid)
    $121 Avg Bid
    13 bids
    Tutorial for IELTS 2 days left
    VERIFIED

    Tutorial Hi I want a Professional Tutor in IELTS to get the IELTS score 7 ASAP Thanks

    $40 (Avg Bid)
    $40 Avg Bid
    11 bids

    I need talented fresh graduate in field of electronic in Kuala Lumpur. Required Skills : PCB Designing Cuircut Designing MCU Programming ARM

    $505 (Avg Bid)
    $505 Avg Bid
    27 bids

    I need someone that has prior locksmith experience or someone good at ...experience or someone good at building AdWords up to have me showing first on google under keyword:locksmith. I’m wanting to target WICHITA KS and I’m not wanting to be charged an arm and a leg. Preferably English speaking and from us/eu. PRIOR LOCKSMITH MARKETERS TO THE TOP!

    $292 (Avg Bid)
    $292 Avg Bid
    30 bids

    ...individual part.) The second item is a metal arm (that will eventually hold sensors on it). [[[(PAY ATTENTION: the .avi video attached is a general idea how to assemble it. My drafter rounded off some edges where they all come together that I didnt ask him for. It should actually look like file 'Arm (Trimetric).DWG' when it is done. I am WAITING

    $165 (Avg Bid)
    $165 Avg Bid
    3 bids

    We need someone that is highly trained in AdWords as locksmith is a very competitive area in AdWords someone with locksmith experience is preferred. Looking fo...AdWords as locksmith is a very competitive area in AdWords someone with locksmith experience is preferred. Looking for someone with a good portfolio that doesn’t charge me an arm and a leg.

    $335 (Avg Bid)
    $335 Avg Bid
    21 bids

    I need the code to realize an hygrometer/thermometer based on Atmel microcontroller (Attiny 85/ 84 or other avr microcontroller). I wish to read the values from the SHT 31-D sensor and proportionally rotate two stepper motors driven by DRV 8825. Each motor rotates a pointer on a dial to indicate humidity and temperature.

    $230 (Avg Bid)
    $230 Avg Bid
    26 bids

    I'm looking for someone with extensive experience with editing females for magazines etc. I need the lipstick fixed in this picture (to red color) and upper arm thinner with shoulder muscle slightly more pronounced. Hair that is hanging in face needs to be hanging straight down and slightly curled (not in face)

    $64 (Avg Bid)
    $64 Avg Bid
    19 bids

    ...leather falcon's blinding cap of sorts over her head; a guy in a wheelchair with guns floating around him; a terrified African-American teenager with one monstrously oversized arm stitched to him; a humanoid robot, innocent looking but his entire body is a weapon; and a pair of inseparable characters: an old english gentleman with a butterfly knife, covered

    $133 (Avg Bid)
    Featured Guaranteed NDA
    $133
    19 entries

    I just need someone to complete this online tutorial video for me. It will only take 6 - 8 more hours and i would like to pay 3.00/hr. The language is php and i need someone who can code it fast and fix errors correctly then upload it to my server fast.

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    5 bids
    Trophy icon Create a Logo with Caricature 3 days left

    I want a logo created for a friend's 9-year-old son. He started his own "farm" that...receive the logo in a full-color vector format. I am envisioning the name Lucky Luna Farm with a caricature of the boy standing to the left of the farm name, perhaps with his arm resting on the "L" in Lucky. Then the moon and shamrock perhaps incorporated somehow.

    $50 (Avg Bid)
    Guaranteed
    $50
    25 entries

    I'm looking to build a drawing for a table with an articulating arm. Need to have a patent drawing too.

    $384 (Avg Bid)
    $384 Avg Bid
    50 bids

    We ar...also be familiar with optimizing the use of these cloud resources. The candidate must have experience with: Azure tables and blobs, service buses and queue, Azure functions, ARM deployment, AZ CLI, Kudu, Azure Web apps. He/she should also be proficient with: C#, C# script, PowerShell script, JSON Knowledge of SQL, containers and VMs is a plus.

    $554 (Avg Bid)
    $554 Avg Bid
    19 bids

    Looking for someone who can write 50 tutorials/articles (100-200 words). PM for details.

    $121 (Avg Bid)
    $121 Avg Bid
    38 bids

    Need professional voice over for a video tutorial of a business mobile application

    $132 (Avg Bid)
    $132 Avg Bid
    42 bids

    Presentation should provide display of basic features and simple instructions for first time customers of a web service. From video they should get clear understanding how application works and what is a workflow process, from registration, subscription to the basic configuration of a account. All of ideas, samples or suggestions will be appreciated, please use attached link as a basic guidelin...

    $203 (Avg Bid)
    $203 Avg Bid
    28 bids

    The eCos binary (6mb) ELF 32-bit MSB executable, ARM, version 1 (SYSV), statically linked, stripped needs to be successfully loaded in IDA Please to don't apply without fundamental knowledge of embedded systems and IDA

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    4 bids

    I am in the process of building a kiwi fruit picker. I need software to control the picker arm. The software needs to identify the fruit and locate the position , by using 2 cameras. the arm has 5 servos controlled by Arduino.

    $1191 (Avg Bid)
    $1191 Avg Bid
    25 bids
    Trophy icon Fix overexposed photo Ended

    Need to photoshop a photo that is overexposed. The right side of his face is too bright as well as his arm. Please fix this

    $7 (Avg Bid)
    $7
    35 entries

    ...star, you can earn $150k plus. Young or old, if you have the stuff we'll know.  Our expertise is in helping businesses generate new leads, new customers and grow sales. We'll arm you with case studies and the sales strategies to be successful. We have a proven sales process that you'll learn day one.  Our clients pay us between $400 - $3,000 per month

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    16 bids

    This is next task for our control system based on the ARM Cortex M4 STM32 MCU. The design of the system is done including initialization, state-event transition diagram and main code template. The design is fragmented into many small relatively simple basic tasks for a freelancer to incrementally develop a firmware. System configuration has been done

    $468 (Avg Bid)
    $468 Avg Bid
    15 bids

    Hello I have a project about Brazil in my university and I need someone in Brazil to hold some signs and write basic words on them to put them as a cover for.... You just have to hold papers and take a picture of it with a background that shows it's Brazil (preferably Rio), you don't have to show in the pictures at all, just your arm and the papers.

    $23 (Avg Bid)
    Local
    $23 Avg Bid
    3 bids

    Hello Guys, I have a .obj 3D model to which I want to apply a material using a bitmap then I want to extract and bake the texture so I can use it ...want to apply a material using a bitmap then I want to extract and bake the texture so I can use it in other 3D softwares ( meshlab). Is there anyone who can write a small tutorial to guide me. Thank you

    $25 (Avg Bid)
    $25 Avg Bid
    9 bids

    We are producer and distributor of Audio sample pack and loops etc. Looking for professional Audio tutorial videos for all DAWs like Logic, Cubase, Ableton Live , Mixing and Mastering etc, in numbers.

    $18 (Avg Bid)
    $18 Avg Bid
    4 bids

    Hi - this project will be for the design guideline document focused on the arm and multiple focus areas including vibration, temp, emg etc. We are looing for the same type of tool as with the shoulder design guideline project.

    $150 (Avg Bid)
    $150 Avg Bid
    1 bids

    I just need some advise on how to get my website SEO up to the top.

    $1975 (Avg Bid)
    $1975 Avg Bid
    22 bids

    I want to have the repairman leaning on my logo icon. The icon should be about the same size as the man. He should lean on it with his arm and elbow on the top. Looking at us suave with pride. That is the main image I will animate the image so i need a couple more images of the man. I would like him to tighten a bolt on the icon. Wipe a spot

    $60 (Avg Bid)
    $60 Avg Bid
    1 bids

    ...page: A) Four photos of people (one is already contoured but the other three need to be contoured). The colours need to be vibrant, the whites need to be gleaming white, the arm muscles need to be defined, the grey skin tones need to be like the control image we will give you, etc. B) ) One photo of a trophy. It is already contoured. It needs to gleam

    $17 (Avg Bid)
    $17 Avg Bid
    42 bids