Autocad advance steel jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    132,555 autocad advance steel jobs found, pricing in USD

    Looking for a complete design of an office with three rooms. We need AutoCAD drawing design 2D and render the 3D design. The building area is 1500-2000 sqft. We can provide some concept ideas, and we need your creativity. Only modern, no fancy, no luxury.

    $440 (Avg Bid)
    $440 Avg Bid
    50 bids

    Hi there, This is Winco from Procurement Leaders. We are looking for band to perform in our congress with the details below. 1. We need some light entertainment (solo guitarist, vocalist, acoustic duo...etc) to play for the welcome drinks for WSC at the Bayerischer Hof Munich from 6pm-8pm on the 12th Oct 2. We also need a larger entertainment piece, think light pop/rock ban...play for the welcome drinks for WSC at the Bayerischer Hof Munich from 6pm-8pm on the 12th Oct 2. We also need a larger entertainment piece, think light pop/rock band to perform for the Awards After Party on the 13th , from 10pm-11.30pm approx Grateful if you can provide me some details and the quotation. As the event is due in 2 weeks, it would be great if you can send over asap. Thank you in advance! Rega...

    $259 - $778
    Local
    $259 - $778
    0 bids

    i need a steel wharehouse design long 50m large 20m (no pole on the middle ) could u make an offer

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    I needed help regarding java assignments assignment include multithreading and also jdbc connection also it have hybernet first and second assignment similar o want ths assignment perfect package structure naming convention should be followed constant and enums should be used and devloped using Eclipse ide

    $11 (Avg Bid)
    $11 Avg Bid
    3 bids

    i will send more details in chat make sure u know sketchup and autocad linpro ansys

    $7 - $18
    Sealed NDA
    $7 - $18
    3 bids
    $18 Avg Bid
    18 bids

    Project Nature: apartment for domestic use Project Location: MacDonell Road, Hong Kong Project Size: 1540 sqft (indoor) 600 sqft (outdoor) Project Status: interior and garden area dismantled and cleared, in bareshell condition. Project needs: I am the owner of the place and designed my apartment myself in AutoCAD. I deal with the contractor directly. Currently we have discussed the following drawings with the contractor (progress in percentage) 1. floorplans 95% 2. partition plans 95% 3. Electric plans 85% 4. furniture plans 90% 5. ceiling plans 60% (not quite complete) 6. elevations (furniture) 80% 7. elevations (other) 0% As my contractor only draw floorplans and cannot provide 3D model. I urgently need a professional and efficient designer to build 3D model to visualize the wh...

    $504 (Avg Bid)
    $504 Avg Bid
    15 bids

    Hi Everyone, I am Akash i am looking for one more Video Editor for permanent editing . Everyday 4 videos it's a big project. Visit Channel for better understanding - Budget 1 Lacs- 4 Lacs Payment type- Advance Location perference - worldwide

    $16835 (Avg Bid)
    $16835 Avg Bid
    2 bids

    Total project cost is 20000 INR.. This is advance milestone. To motivate and start!!

    $61 (Avg Bid)
    $61 Avg Bid
    1 bids
    Freelance Autocad Electrical 6 days left
    VERIFIED

    We are a small electrical installation company based in Milton Keynes with jobs around the UK. We are looking for someone to CAD our electrical hand marked drawings up in order to present them to the client at the end of the job.

    $29 / hr (Avg Bid)
    $29 / hr Avg Bid
    27 bids

    Hello Designers. We are Construction company. we are loking for a creative logo for our company. Our company Name is : Advance Structure Devlopers we need logo that should be unique and our logo should represent Construction company. we are not looking for generated logo so. Please dont post any Generated logo

    $10 (Avg Bid)
    Guaranteed
    $10
    172 entries

    I need a freelancer to design an AutoCad from a 2D house plan drawing

    $348 (Avg Bid)
    $348 Avg Bid
    81 bids

    * An object with set industry standard to be design using 3D Autocad. The file will be used for 3D printing later. * Person(s) accepting this project should know 3D Autocad very well. * The detail of the project and industry standard has been researched and is available to be discussed with the selected deaigner.

    $101 (Avg Bid)
    $101 Avg Bid
    35 bids

    I already have basic website refer to as taxliner.in. I have future prospects for it. Need someone who has experience and reliable at the same time. I need to implement various heads in it. Will better explain on call.

    $95 (Avg Bid)
    $95 Avg Bid
    15 bids

    ...Every work must be 100% unique and original. No copied work is accepted. There will be no grammatical or other type of errors in your writings. Everything you will write must be informative and interesting to read. You are not allowed to use or share any content that you are paid by me. There will be ongoing work opportunities for the appropriate candidates. Milestone payment will be created in advance but can be released only after the acceptance of each work. Please feel free to ask any questions if you have any. I can pay $1 per 100 words of writing and rewriting. Please answer this question. Why should I choose you for this project? Happy bidding!...

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    8 bids

    Hi Jitesh, I have seen your profile and I'm just wondering if you could be interesting in helping me to sync zapier or something else with a mysql's customer. I need to sync contacts (Magento and Freshdesk), ticket (freshdesk) and order (Magento). I can give you more explanation via chat Thank you in advance KR

    $520 (Avg Bid)
    $520 Avg Bid
    1 bids

    Hello, Our agency is looking for new writers! Who we want to hire: - Experienced article writers - EXCELLENT grasp of the English language in writing - Ambitious and creative individuals - Well disciplined and adhere to deadlines! - Good team player and communicator (will work together with other writers and editors in the team) What do we offer? - Regular article job off...levels: basic and premium. Basic writers get paid 2$ per 500 words Premium writers get paid 4$ per 500 words Editors get paid extra. You will be assigned to a level after we request a sample and after it is reviewed by the team. Please send a few samples. Please start your bid with the sentence "I HAVE READ THE PROJECT DETAILS AND UNDERSTAND THEM". Only bid if you agree to the terms. Thanks in advan...

    $18 (Avg Bid)
    $18 Avg Bid
    43 bids

    Read before making an offer!!! Budget: 270$ Time: 10-15 days Requirements: LUA & XML skills ! No Game! No Graphic! Only an custom Interface / UI for that game! Similar to mods for Minecraft, Skyrim or other games The screenshot "Interface ...Burning Crusade" and the upcomming Addon "WotLK" Version: Here are a few more links to see how the addons work in World of Warcraft. :Interface_customization :Interface_customization Sorry for that: NO advance payment !! NO extern payment !! NO Messenger !! NO money for tools !! NO extra money after order !! NO money for tools everything here on Freelancer!!!

    $143 (Avg Bid)
    $143 Avg Bid
    4 bids
    Bernese 5.2 -- 2 5 days left

    Bernese 5.2 I am looking for someone who can teach me this software on how we process a data please contact me if you are interested in Thank you in advance

    $140 (Avg Bid)
    $140 Avg Bid
    5 bids
    Trophy icon Logo Design for Free To Use 28 days left

    Hi freelancers, We need a new logo for our company. Our company name is Free To Use and we are a company that is providing/distributing free to use content such as music, sound effects, images, videos, etc., for content creators. The logo that we currently have is a really simple price tag - which says "free to use" on it. Please see the attached im...is a really simple price tag - which says "free to use" on it. Please see the attached image. We'd like to keep this price tag idea, but we'd like to get a new and better version of it. The logo should be modern, simple, and minimalistic and it should only have one single color. Let us know if you have any questions - we'll be looking forward to seeing what you come up with! Thank you in advance...

    $200 (Avg Bid)
    Guaranteed
    $200
    847 entries

    ...board shall remain connected to the chosen wifi network, and if the connection is lost, it should be able to try connecting again at regular intervals until the connection is restored - If, for some reason, the board freezes or goes idle, it has to be able to reset by itself, looking again for the connection Additional conditions: - The code must be uploaded using the Arduino IDE - Provide in advance the list of necessary libraries (if any) - The code must open the possibility to develop the code further using sensors and making HTTP calls over the internet. - indicate if buttons must be introduced in the project (and how many) to reset or access the wifi configuration page (if necessary - better if it can be avoided). Please ask questions if you want to propose modifications t...

    $191 (Avg Bid)
    $191 Avg Bid
    5 bids

    I would like a person who is much expert in Advance Excel, chart and pivot chart skills.

    $13 (Avg Bid)
    $13 Avg Bid
    10 bids
    Trophy icon Logo for „Metalopanel” 1 day left

    I need a new logo for "METALOPANEL". The company deals with the production and assembly of steel structures. I would like the logo to be blue. The logo should also contain some elements suggesting constructions or some letters should resemble constructions. I'm counting on your creativity ;) Under the "METALOPANEL" logo there should be an inscription "konstrukcje stalowe". In the attachment I leave the old logo and a few photos showing what the company does.

    $30 (Avg Bid)
    Guaranteed
    $30
    734 entries

    (First watch the attached video.) Most shaving action is one in which a sharp edge is pointed more or less towards the direction of its shaving movement over the...scraper-shaver, then a 4 strips of butter will be shaved away by each shaving stroke.   A basic design of this butter scraper-shaver is provided herein with rough shape and dimensions.  This contest is for the best practical design, which is at the same time elegant in looks, ergonomic and comfortable to be used and can easily be mass produced.  The material of construction can either be stainless steel, or colored opaque or colored transparent plastic.  The contest award of $60 is guaranteed to be awarded to the best entry at the end of the contest. The winner will be required to provide a S...

    $65 (Avg Bid)
    Guaranteed
    $65
    25 entries

    ...carefully. Requirements * Excellent in English. * Bachelor's degree in Computer Science, Information Technology, or related field * 2 years of teaching experience in Computer Science field. * Excellent in English. * Reliable internet connection and equipment to perform all job duties * Teach to a set curriculum plan with clear learning outcomes and competencies * Prepare a course syllabus in advance of the course start date (templates provided) * Ensure that lesson plans and presentation materials for the full course are relevant and current. * Teach all class sessions at the scheduled time. * Respond to student inquiries and provide feedback on student assignments in a timely manner. * Coordinate with other instructors in the certificate program, to ensure curriculum ...

    $50 / hr (Avg Bid)
    $50 / hr Avg Bid
    5 bids

    We like to design unique projects that truly reflect our clients needs & personality. We have recently signed multiple new projects and are looking to expand our team. The ideal candidate will be a qualified designer who is able to construct clear documents using REVIT (minimum 3 years) & AutoCAD. This candidate should have an in-depth knowledge of all steps related to project completion and diligently communicate with necessary people to ensure timely execution

    $39 / hr (Avg Bid)
    $39 / hr Avg Bid
    34 bids
    AutoCAD Designer 4 days left

    We are searching for a Design Associate (CAD Draftsman) to work with a collaborative Sales and Production team. The Design Associate will assist our Sales, Production and clientele with kitchen, bathroom, addition, whole house and new construction design.

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    48 bids

    Design Building and floor plan. Building 50 x 100 side by side studio units of 16'x25' , 10' ceiling, with 6' balcony off each unit up to 25' in length center hallway of about 6' 2 floors, , total of 16 units, flat roof for lounging, jacuzzi, materials to be used are cement and steel, Beach is on 1 side, road is on other side, lot is approximately .85 acre, @100 x 380 Units should be setup for option to have 2 units connected w/door Parking for 16 vehicles near to road Maintenance area for laundry, utilitiy room front and back stairway to 2nd floor & roofdeck Cement roof Open floor plan: Small kitchen area, full bath plus extra toilet room King or Queen bed Sitting area Laundry Water catchment in basement A/C Building should look impressive...

    $744 (Avg Bid)
    Urgent
    $744 Avg Bid
    16 bids

    To submit planning permission to demolish a 25m x 5m building and rebuild a 25m x 8m steel frame building on an industrial estate in Wales, uk

    $451 (Avg Bid)
    $451 Avg Bid
    22 bids
    I need a JS knight 4 days left
    VERIFIED

    Hello, to reinforce our team I need someone with very strong skills in js web developement. I'm looking for someone highly skilled who can create things like Also, if possible some web3 knowledge will be appreciated. We are regularly working on web3/crypto projects and I need someone who has a little idea about this, even if for now it's more about "pure dev" like th...web3/crypto projects and I need someone who has a little idea about this, even if for now it's more about "pure dev" like the website above, there are also some "real"web3 projects.(smart contracts deployment etc.) I would like really someone who knows perfectly react js or similar. Please send me your portfolio and if possible a link to your pro page or at least some previous w...

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    62 bids

    Hi Roman P., I am new to the platform and interested in hiring you for a project, message me as when you have the time, thank you in advance

    $157 (Avg Bid)
    $157 Avg Bid
    1 bids

    We are looking for some experts for eBay and Amazon to create listings. The content (images, texts, etc.) already existing. The only job is, to put all the data to the sales pages and create new sales offers. For eBay, this includes to set mandatory product details (also given in advance). If you are an expert for offers for one of both market places, we also would be fine with it. We will pay per published offer. Please quote for 1,000 offers in the first run. It is likely to have further projects in future.

    $156 (Avg Bid)
    $156 Avg Bid
    45 bids

    Create a cool character that is smoking weed and dabbing on wax. I also need to see mushrooms, gnomes and aliens in a magic garden. The words "Craft Care Packz" need to be on top because that is the name of my brand. No do not put the " " symbols in the brand name lol The slogan under the brand name needs to say "Quality Is An Understatement" Thanks in advance!

    $15 (Avg Bid)
    Guaranteed
    $15
    64 entries
    Slack Replica Front-end 4 days left
    VERIFIED

    ...designer/developer to create a web app frontend that (looks) is essentially a replica of the Slack user interface with a different color theme. However, selecting a 'channel' will display an embedded website (iframe) in the main body area - instead of chat. 3 Pages: 1. Signup Page with options for SSO (google, microsoft) 2. Login page with SSO options (just hardcode an email/pw combination to advance to dashboard) 3. Primary dashboard (the main interface - just like slack, except the main body is not for chat - it will be an iframe to ) Functionality on the Dashboard: A. Modal to add a new channel (dropdown to select folder, channel name, URL) B. Ability to add, edit, delete channels C. Modal to add a new folder D. Ability to add, edit, delete folders for channels E....

    $510 (Avg Bid)
    $510 Avg Bid
    108 bids

    my aim is this _ at the moment i have set the google tag manager ( container ) for a couple of customer - but Not have skills to set for example a good settings mind to analize this kind of information as u can teach me settings facebook pixel , setting goals in GA4 and organize everyting in a GTM customer container is the starting point to analize the marketing trend and find solution str...information as u can teach me settings facebook pixel , setting goals in GA4 and organize everyting in a GTM customer container is the starting point to analize the marketing trend and find solution strategy to the customer so i need to set this in a place _ and extract data to analize and show to the customer i need a normal _ english conversation sharing screen and a course explanation in ad...

    $191 (Avg Bid)
    $191 Avg Bid
    16 bids
    Photo Editing Specialist 4 days left
    VERIFIED

    ...please do not apply if you are an agency* Job Responsibilities Will Include: Edit / Retrieve / Manage Photos from Shared folders Edit Photos based on the client's specification i.e., format, size, etc., to be used for various platforms. Help create a bigger library of usable assets. • Please note that the list of roles is not limited to the above. Skill Requirements Software: - Adobe Photoshop (Advance Level) - Creating a new image using different assets; images need to be photo-realistic so perspective, lighting, and proportions are extremely important. - Content Filter [Content aware] - Masking - Image Cropping - Text alignment - Image cleanup to remove noise, unwanted objects, etc. • Because of the nature of the work, we will require that the ideal candidate...

    $30 / hr (Avg Bid)
    $30 / hr Avg Bid
    78 bids

    I need someone to create CAD similar to the picture with my dimensions, I need it very fast. it's urgent and easy but I don't have access to AutoCAD. please check the attachment.

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    12 bids
    Flutter Developer Needed 4 days left
    VERIFIED

    We need a Flutter Developer to develop vehicle live tracking & history tracking screen as per share in screen shot. Those who apply for this job must have advance level working knowledge in flutter & craft code using best practice Live tracking screen functionilites: 1-Google rich map with smooth car marker. 2-User able to select car & upon selection marker identifies selected car with current position in map. 3-Google map basic functionilites for e.g direction,zoom control,map layer control,mobile user current location. History Tracking: 1-Google rich map with smooth car marker. 2-Purpose of this screen is that user might be able to check yesterday,today car movement using play mode controls. 3-User applies any kind of filter such as date ranges and upon which screen sh...

    $348 (Avg Bid)
    $348 Avg Bid
    18 bids

    We need Transformer Substation Design & Sectional Layout for 2 Pole, 4 Pole and PCC Pedestal Mount with Yard details complete in Autocad format.

    $86 (Avg Bid)
    $86 Avg Bid
    4 bids

    Dear Abay S. Please I need to know the job specifications & requirements before accepting the project, to know whether they are on my scope or not. Accordingly, we can create all work milestones together. waiting for your feedback. Thanks in advance

    $8 (Avg Bid)
    $8 Avg Bid
    1 bids

    ...metal scrap – such as metal sheets, rods, coils, rebars, etc. 4) we don't accept plants which work only with precious metals (gold, platinum, etc.). Finished product is the product which doesn’t require further work on it – for example rebars (reinforced steel bars) () are finished products – after their production they will be used in a construction industry. Semi-finished product – for example steel billet, isn’t a ready product and should be futher processed into finished product – for example from steel billets specialized plant will manufacture rebars. We collect ONLY semi-finished metal products (ingots, billets, blooms, slabs, sows) manufacturers – and ONLY those who manufacture them from scrap metal (wa...

    $18 (Avg Bid)
    $18 Avg Bid
    32 bids

    I need a 3D animation video of the cage and housing part by part. The details of the housing structure and cage will be provided and can also give you the 2d drafting in autocad... the reference picture of the cage has been attached

    $88 (Avg Bid)
    $88 Avg Bid
    14 bids

    We're building a PPE cabinet with a touch screen for industrial environments. This cabinet will be used to store personal protective equipment as well as power tools (drill/saw etc) and/or industrial consumptions (like disposable mask and gloves). I need a realistic render of this cabinet in an industrial environment. The cabinet's drawing and CAD rendering is in the attach...cabinet's drawing and CAD rendering is in the attachments. A typical setup is * the cabinet with touch screen will sit in the middle * on the left, there is a vending machine dispensing disposable items * on the right, there are a few lockers dispensing high value items. I'm freelancer power user. Once I've identified potential entries, I'll discuss in deals to make update and en...

    $53 (Avg Bid)
    Guaranteed
    $53
    13 entries
    autocad drawing 4 days left

    Autocad drawing engineer draw electrical drawings

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    32 bids

    FEM model for structural steel model. Urgent delivery.

    $129 (Avg Bid)
    $129 Avg Bid
    19 bids

    ...experience and attract the highest business to the platform. The UX consultancy service is to help deliver an unforgettable user experience on the platform to the targeted global audience. As UX Consultant, you will be closely working with Coresonant’s UI development team as a trusted user experience design expert advisor. ROLES AND RESPONSIBILITIES Guide UI designers in developing UIs with advance & innovative look and feel Advise UI designers on selection of all UI aspects such as layout, font, color, style, text, label, and more Help designers in making the UI most user friendly for the prospective clients across all regions of the world Consult with Product Manager to understand the business aspects and target client persona for the intended UX design Enable wor...

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    5 bids

    We have a Zoho CRM for our property where team enter people’s info and reserve or sell units through. Now I want to have an app to show people see our unit’s. Severals designs with the prices etc, then they can fill their info and check on what unit is available and the ability to reserve it for 24 hours before they should come in to the sales center and pay the advance for the reservation. 1. The application should give us “the admins” to extract all the infos to directly upload it into Zoho CRM 2. Edit/ change the units from (available, reserved, blocked, sold) Other features as well like weekly updates, monthly updates about the projects. App should be available in both Apple & Android.

    $658 (Avg Bid)
    $658 Avg Bid
    96 bids

    Hi, I have a few Youtube video. I need to dubbing for them with Syrian Arabic male and female voice. Our budget; For each 200 words 5 usd. Totally words 3.000-7.000 words. Requirements: - 1 male 1 female voice over - Clear voice record (Do not accept low quality records) - Syrian arabic accent waiting for your voice sample and message. Thanks in advance!

    $52 / hr (Avg Bid)
    $52 / hr Avg Bid
    5 bids

    I need someone who can draft architectural plans in 3dx max, sketchup, autocad. Etc as and when requirement arises

    $79 (Avg Bid)
    $79 Avg Bid
    34 bids

    I have a building project and fired out builder. He gave me a usb stick with auto cad files and I need them all converted to pdf

    $21 (Avg Bid)
    $21 Avg Bid
    15 bids