Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    1,510 avr atmel jobs found, pricing in USD
    pcb design 5 days left
    VERIFIED

    Design PCB and supply BOM/CAM to spec. Atmel pic Nordic wireless chip

    $171 (Avg Bid)
    $171 Avg Bid
    21 bids

    For a project to locate the position or certain items country-wide, I use a slave and a master. The slave electronic sits on the items, while the slave receives the location and process the data. For that I need now someone who can now develop the schematic and the pcb with all files for production. The purpose is to send location once a day over a periode of up to 12 months. The hardware may inc...

    $269 (Avg Bid)
    $269 Avg Bid
    15 bids

    I am looking for someone with USB protocol experience to write a small program which can be merged into my existing Arduino/Atmel source. I am new to the USB protocol and not having much success finalizing this portion of the code. Specifically, I am having trouble resuming USB communication after the chip is put into a low sleep mode whilst simultaneously running from a Li-Po battery source, and...

    $47 (Avg Bid)
    $47 Avg Bid
    5 bids

    Atmel and LPC1769 project. Swimming pool controller.

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    23 bids

    Learn embedded systems on avr microcontroller from very basic to advanced level, that is needed to work in industry

    $8 (Avg Bid)
    $8 Avg Bid
    1 bids

    We require a real-time programmer c language for ATMEL ARM Processor experience with Apollo XP95 protocol.

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    19 bids

    I have an AVR program that I use frequently but it was written years ago and will only recognize FAT or FAT16 SD cards. The program was originally written for the ATmel 168 chip and I do have a revised version for the ATmel 328 chip. Versions of the program were written to operate two size of displays and some other optional features. I believe I have all the original files and all of the revise...

    $215 (Avg Bid)
    $215 Avg Bid
    12 bids

    I need help to program some boards that just arrived from factory. You must be expert in Atmel 7.0, Atmel chips and Atmel MKII programmer. I have .eep and .hex programs. I need you to upload to my pcbs via TeamViewer. This is small but important job leading to other projects. Rick

    $117 (Avg Bid)
    $117 Avg Bid
    4 bids

    Hello Mr. Karthikeyan, We are a small software developer firm in Turkey, Gaziantep and we need a hardware design of GPS unit in which quectel mc60 and atmel (arduino ide compatible) or stm32 series microcontrollers (arduino compatible uc's more preferred) will be used. We are 3 software developers and have little knowledge about PCB design, only designed small projects for our IOT projects. T...

    $100 (Avg Bid)
    $100 Avg Bid
    1 bids

    Looking for someone experienced in programming with an AVR microcontroller Atmega128. Need a pseudo code/ complete code to detect and decode an audio morse code signal given as an input from the computer to the microcontroller via headphone jack. Please find the attached document for more details.

    $29 (Avg Bid)
    $29 Avg Bid
    8 bids

    Looking for someone experienced with Arduino and programming with an AVR pocket programmer. Need help importing some code I have downloaded from Github using my AVR programmer, possibly needing some adjustments to the code.

    $155 (Avg Bid)
    $155 Avg Bid
    31 bids

    I am Diploma Electronics engineer But i have no knowledge in hard coding I want someone to teach me the following from Basics to industrial level programming in c/c++ by usin uvision IDE or atmel studio Course including [login to view URL] of uC [login to view URL] configuration and flag set or reset [login to view URL] types and arithmatic operation [login to view URL] [login to view URL] inte...

    $500 (Avg Bid)
    $500 Avg Bid
    11 bids

    THE TASK: We have a product which is already running in serial production since years, but the single interval times are a little bit unexact - they need to be adjusted. (12 functions). Also length of beep sound need to be adjusted. For the running production I need the software for the ATMega16-16AU (TQFP44). This microcontroller will be obsolet in future and the replacement will be ATMega16A-AU...

    $209 (Avg Bid)
    $209 Avg Bid
    9 bids

    Electronics Design, new pcb development for a wireless sensor network device. Internet of things enabled. Atmel microprocessor and wireless transceiver, with analog and digital IO.

    $24 / hr (Avg Bid)
    $24 / hr Avg Bid
    30 bids

    I have a at90usb162 demo board able to act as HID keyboard. I need you modify the official demo located in : [login to view URL] This demo wait for a SELECT key to be pressed in board to output a TEXT as you can see in documentation : [login to view URL] I need you modify source to avoid the wait for pressing select key and output the text automatically without waiting any key press.

    $59 (Avg Bid)
    $59 Avg Bid
    2 bids

    Proficient with TI and ATMEL devices and modules. Software like Code composer studio, IAR workbench etc would be really advantageous. The requirements are as follows: 1. Creating the basic layer of connectivity for BLE and WiFi as per the module selected. [login to view URL] the sensor via I2C, SPI and UART and display on readily available apps. 3. Transmitting DATA via BLE to a gateway and via Wi...

    $357 (Avg Bid)
    $357 Avg Bid
    21 bids

    hey, get back to me with the strategical SEO plan for [login to view URL]

    $8 (Avg Bid)
    $8 Avg Bid
    1 bids

    A Lora Vehicle track module will be developed by using the Atmel or ARM processor. It will be designed 3 type of Lora module for the project. - receiver module - transmitter module - gateway module transmitter distance should be 6km (It might be chosen cheap Lora modules.) Receiver modules must be connected with each other(for mesh network ) Gateway must have 2G/3G

    $2157 (Avg Bid)
    $2157 Avg Bid
    21 bids

    need a free lancer trainer for embedded system in AVR , ARM , PIC AND IOT'S for training purpose

    $18 (Avg Bid)
    $18 Avg Bid
    6 bids

    We have a hardware design with an AVR ATmega 65 micro and a u-blox GSM module. We want a firmware to this design to send MQTT messages into a [login to view URL] server.

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    15 bids

    We have a hardware design with an AVR ATmega 65 micro and a u-blox GSM module. We want a firmware to this design to send MQTT messages into a [login to view URL] server.

    $614 (Avg Bid)
    $614 Avg Bid
    13 bids

    .asm code/file should enable the system/atmel to operate as a clock and optimally as a timer and or stopwatch.

    $37 (Avg Bid)
    $37 Avg Bid
    4 bids

    Hello, I am looking for a programmer. The freelancer has to be proficient in programming ATtiny1616, IC MCU 8BIT, from Microchip. Previously an AVR® 8-bit processor. The job is to update an existing program, like modifying the LED blinking, timer etc... We will provide more details. Thanks

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    14 bids

    This is Phase 1 of a 3 phase project. Only one phase is active at a time. Subsequent phases will begin at the completion of the current phase. A successful freelancer will have the best opportunity to bid on and perform work needed in subsequent phases. I need an example program from Microchip that includes a Microchip (Atmel) SAMD21 micro processor and a Microchip (Atmel) ATWINC1500 Wi-Fi module...

    $1269 (Avg Bid)
    $1269 Avg Bid
    28 bids

    Hi, its move a program from arduino ide to atmel studio 7, its 1 day of work.

    $189 (Avg Bid)
    $189 Avg Bid
    11 bids

    Looking for a qualified Electrical Engineer or Computer Engineer. Must have experience in Embedded Hardware development, debugging and fault finding and using test instruments. Must also have experience in Embedded Software development, firmware writing in C, more specifically be proficient in writing codes for 8/32 bits microcontrollers (Atmel/Microchip). Familiarity with RTOS in embedded contro...

    $359 (Avg Bid)
    $359 Avg Bid
    20 bids

    Need a user defined mode developed for an excitation system in FORTRAN suitable for use in PSSE v34. Includes AVR PSS OEL UEL

    $3510 (Avg Bid)
    $3510 Avg Bid
    1 bids

    I need a source code for arduino to make a USB SD Card Reader. My chip is ATMega32U4 and I need the code in arduino. The circuit should act like an standard USB card reader and should work with no driver on PC or mac or linux.

    $150 (Avg Bid)
    $150 Avg Bid
    10 bids

    A Freelancer with skills in digital logic design is needed to write a small program for a CPLD device using WinCUPL. Atmel/Microchip devices would be used. The CPLD will manage clocking a fixed byte stream into a FIFO ic. The byte stream will not pass through the CPLD device. The program should be simulated and verified. Please see attachments and feel free to offer suggestions.

    $186 (Avg Bid)
    $186 Avg Bid
    3 bids

    You need to modify C code to adjust the counter/timer settings on a Tiny AVR. You must be skilled and experienced in Atmel Studio and the architecture of Tiny AVR microcontrollers.

    $577 (Avg Bid)
    $577 Avg Bid
    26 bids

    Looking for a qualified Electrical Engineer or Computer Engineer. Must have experience in Embedded Hardware development, debugging and fault finding and using test instruments. Must also have experience in how Embedded Software development works and collaborate with developers of PCB and / or firmware to load, debug and run sniffing and probes on hardware and serial lines where required in locatio...

    $36 / hr (Avg Bid)
    $36 / hr Avg Bid
    11 bids

    We Require an Electrical Engineer who can Design and Develop a Custom PCB and Guide Firmware development for RTOS based system We have existing design that needs enhancing and expanding to support additional ports and functions. We have multiple power transform functions to control motors , senses etc and require someone experienced to design PCBs All work is exclusive and a Non Compete Non Disc...

    $414 (Avg Bid)
    $414 Avg Bid
    26 bids

    Looking for a qualified Electrical Engineer or Computer Engineer. Must have experience in Embedded Hardware development, debugging and fault finding and using test instruments. Must also have experience in Embedded Software development, firmware writing in C, more specifically be proficient in writing codes for 8/32 bits microcontrollers (Atmel/Microchip). Familiarity with RTOS in embedded contro...

    $427 (Avg Bid)
    $427 Avg Bid
    23 bids

    Need the C code of the driver of I2C for Atmel microcontroller. I have uploaded a application note of atmel/microchip you just need to implement it in keiluvision.

    $63 (Avg Bid)
    $63 Avg Bid
    9 bids

    Prefer in Atmel studio with source code ( project of atmel studio ) and comments in all block of program and detailed instruction for compiling and programming in board ) – NOT ARDUINO IDE FIRMWARE FOR CUSTOM BOARD BASED ON: • ATSAMD21G18 • n.2 eeprom at24c256 • Buethooth HC05 • INPUT 4 channel 4-20mA to I2c ( adc1115 ) ( [login to view URL] code and example ) &bull...

    $803 (Avg Bid)
    $803 Avg Bid
    24 bids

    First bootloader at custom board based on ATSAMD21E18 REQUIREMENTS: • see the name of the board “3Logger M0” in windows on Arduino Ide ( not arduino zero or similars) • see the usb after programming, like a normal usb • Version of the board for Atmel Studio 7 ( file board configuration ) with eeprom at24C256 anf Flash Spi • All configuration as pinout • File...

    $185 (Avg Bid)
    $185 Avg Bid
    4 bids

    The project is to develop a bootloader (and custom firmware update software) for both the ATMEL ATSAME70J19 and the AT90CAN32 microcontroller, which will allow for reprogramming the boards via the CAN bus. The CAN bus will have multiple of these microcontrollers, so they will need to be addressable. There are three parts of this project: 1. Write a bootloader for the ATSAME70J19 microcontroller...

    $4301 (Avg Bid)
    $4301 Avg Bid
    16 bids

    The project is to develop a bootloader for both the ATMEL ATSAME70J19 and the AT90CAN32 microcontroller, which will allow for reprogramming the boards via the CAN bus. The CAN bus will have multiple of these microcontrollers, so they will need to be addressable. There are three parts of this project: 1. Write a bootloader for the ATSAME70J19 microcontroller, which will allow for upgrading firmw...

    $1356 (Avg Bid)
    $1356 Avg Bid
    22 bids

    ATMEL STUDIO 7 using ATmega128 and RFID-RC522, read and write sectors on MIFARE Clasic 1k and MIFARE ultralight, reading card over SPI and transmit it over ATmega128 UART, code in C, no asm files

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    The loader maintains all functionality of Optiboot. Also supports loading of the program from the connected SD card. struct a { char master [20]; char phone_number[20][20]; char newFile[20]; // name of sketch to be load char prevFile[20]; // name of current sketch Boolean flagAcknowledge; Char massage[20]; }; In load time of the Loader controller checks EEPROM to address 0 structure of ...

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    - avr based MCU control for 6 DC (small) motor (PWM control speed and direction), 2 motors in pair (2.5V, 100mA each motor) -1 heat pad on off control (3.7V, 1A), -USB charge and Lipo battery for working 2-3hours (3.7V 2000mAh), charging Volt and current 5V/1A - Switch position (5), position 1 (OFF), 2(mode1), 3(mode2), 4(mode3), 3(mode4)

    $460 (Avg Bid)
    $460 Avg Bid
    5 bids

    I currently have a 3D printer PCB, which is a custom board with an Atmel chip. It connects to many external components, which I want to design directly into the board. Looking for electrical engineer to redesign the PCB to incorporate these external components, such as a DC-DC buck converters.

    $538 (Avg Bid)
    $538 Avg Bid
    39 bids

    A Freelancer with strong skills in C++ and AVR assembler is needed to write a special file conversion utility. This will be a console type application. The utility will read the AVR assembler .hex file and convert into an Intel-style record based .hex format. Please see attachment.

    $513 (Avg Bid)
    $513 Avg Bid
    6 bids

    Customize the Arduino Mega library to the Arduino Due. Add new code to hold is therefore avr and SAM usable. [login to view URL]

    $106 (Avg Bid)
    $106 Avg Bid
    2 bids

    The project consists of porting c source code from an atmel xmega device to a sam E53 device. Experience required in embedded systems using c and knowledge in atmel studio 7 IDE. Also, need to have experience in BLDC motor controls. I2C, UART and RF for laying out PCB antennas. I almost forgot, i need someone in the Los Angeles, CA USA area.

    $40 / hr (Avg Bid)
    $40 / hr Avg Bid
    15 bids

    Me: I am a senior hardware design engineer in the Bay Area with a potential new product. Prototype hardware is ready, but I need test firmware to validate it. You: Develop a firmware package for electrical validation and debug stage.

    $1151 (Avg Bid)
    $1151 Avg Bid
    16 bids

    Q: Write, simulate, and demonstrate using Atmel Studio 7 an assembly code for the AVR ATMEGA328p microcontroller that performs the following functions: 1. Perform a multiplication of a 16-bit multiplicand with an 8-bit multiplier without using the MUL instruction. Use iterative addition to perform the above multiplication. 2. Registers R25:R24 hold the 16-bit multiplicand, R22 hold 8-bit multiplie...

    $151 (Avg Bid)
    $151 Avg Bid
    9 bids

    projects in embedded system using avr , pic , arduino and raspberry pi

    $147 (Avg Bid)
    $147 Avg Bid
    33 bids

    I need to edit a pcb design made whit eagle. I've the schematich file and brd file of the board whit Atmel 328P and need to migrate to ATSAMD21E18 32-bit Cortex M0+ Upgrade: Using RTC of ATSAMD21E18 ( coin cell battery) Using USB of ATSAMD21E18 Removing microSD Nedd BRD and SCH eagle files

    $142 (Avg Bid)
    $142 Avg Bid
    12 bids

    We need an executable build for Raspberry Pi (ARM) Executable for Linux x86_64 is available at (no builds for ARM): [login to view URL] The source code is stored in this repository: [login to view URL] The Raspberry architecture is: uname -m: armv6l dpkg --print-architecture: armhf We need a rebuild of the source which can run on the Raspberry and instructions on how to do this build.

    $137 (Avg Bid)
    $137 Avg Bid
    4 bids