Camera arduino jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    13,236 camera arduino jobs found, pricing in USD

    Need to be able to encode MIPI-attached camera and encode to H.264 at low bit-rates not exceeding 230Kbps. Output must be H.264 byte-stream, sent through TCP to a TCP server (which we have). Other information; - MIPI camera will be scaled to 720x576 pixels - fps in the range of 10 to 15 is acceptable - H.264 must be baseline profile - the elementary

    $686 (Avg Bid)
    $686 Avg Bid
    4 bids

    The task will be about programming the flight controller and syncronising it with sensors in order to give the drone a possibility of autonomous flights on particular surfaces with avoiding obstacles

    $264 (Avg Bid)
    $264 Avg Bid
    6 bids

    ...ως εξωτερικός συνεργάτης. Η εταιρία δραστηριοποιείτε στον χώρο των επιστημ&omicr...

    $1263 (Avg Bid)
    $1263 Avg Bid
    6 bids

    I am an entrepreneur looking for someone who can take some ideas from me and implement them in a working project. Most projects are Raspberry pi/ Arduino/ IOT based. Location: Indore, MP.

    $175 (Avg Bid)
    $175 Avg Bid
    8 bids

    I need you to develop some software for me. I would like this software to be developed for Windows using Python. The software is for face recognition using IP surveillance camera.

    $251 (Avg Bid)
    $251 Avg Bid
    10 bids

    ...app developed for transferring WiFi configuration via sound which produces app to the P2P camera. Deliverables - source code, just 2 textboxes for SID & password and button is needed on UI side. After button is clicked, this data should be transfered to P2P camera which is waiting in config mode. On answering specify please how you will do this task,

    $167 (Avg Bid)
    $167 Avg Bid
    4 bids

    I need [url removed, login to view] project extended with following functionality: - show list of recorded videos (url, time, length)...following functionality: - show list of recorded videos (url, time, length) - transfer videos to local storage in the app for playing - play videos - initiate recording on camera deliverables - source code

    $184 (Avg Bid)
    $184 Avg Bid
    3 bids

    I just need a person w a hand held camera to video an office for me to preserve the layout-- an hour tops.

    $30 - $250
    $30 - $250
    0 bids

    A very simple project. I need a program that will run when activated by a push button. The sequence I'm looking for is as follows. push button turn a servo 90 ° clockwise hold 1 second turn the servo 90° anticlockwise stop (The program will not restart until the button is pushed again)

    $16 (Avg Bid)
    $16 Avg Bid
    7 bids

    Hi people, I have px302-050av pressure transducer 4 wires want to connect to UNO using the Arduino program. I had connected the pump to the same UNO and wrote the code for the pump and it’s working good. But I want to connect the sensor to get signal and code it. My project is to control the liquid level. I want the sensor to send signals to the UNO

    $149 (Avg Bid)
    $149 Avg Bid
    17 bids

    I need to run 2x 1080p camera inputs simultaneously on two different programs (Wirecast + Custom Camera Control Software). Obviously, I can only run one instance at a time on one program. I know there is a bunch of freeware options like ManyCam and iSplit... but this is for professional camera production and I need a reliable system.

    $30 - $250
    $30 - $250
    0 bids

    We need a electronic board and software for Arduino, to get in touch Coin and bill acceptor , thought serial protocol to know which bill or coin is getting into the machine. We need to hear the coin and bill validator using RS232 virtual port to put in the screen the value. Actually we are using MDB4.2

    $246 (Avg Bid)
    $246 Avg Bid
    5 bids

    I need my ardunio code sorting out, the code currently works but not the way I want. I would like my code to do 3 things 1 run sen...webpage. I am guessing using loops and millis this is possible but im struggling with the code. how much do you think this would cost PLEASE NOTE THAT THIS IS FOR AN ARDUINO UNO SO SPACE IS TIGHT ON THE FILE

    $29 (Avg Bid)
    $29 Avg Bid
    8 bids

    Online live video streaming using OBS, to be optimised with a MacBook Pro and Logitech Brio 4k to enable seamless 4k streaming. Using 300Mbps broadband, average 90Mbps.

    $14 - $21 / hr
    $14 - $21 / hr
    0 bids

    ...implement a working Hydroponic Sensor System using Arduino. Sensors required: 1. Light Sensor to give measurement in PAR 2. pH Sensor to test Hydroponic system pH 3. TDS and EC sensor to give measurements in PPM and MicroSiemens/cm respectively 4. Humidity and Temperature sensor Expectations: An Arduino setup that can be implemented on any growing

    $125 (Avg Bid)
    $125 Avg Bid
    9 bids

    Programador/ desarrollador electrónico, preferentemente (Arduino o rasberri pi ) Se busca controlar el acceso de una oficina con este sistema. Estas oficinas cuentan con varios negocios independientes, y empresas independientes. Por lo que el horario de trabajo y días varían. No hay policía ni vigilante, por estas razones debe ser un sistema autónomo

    $1995 (Avg Bid)
    $1995 Avg Bid
    6 bids

    ...isplay/overview Instead of building a weather station, I want to build a Google Analytics dashboard to monitor my website traffic. User journey: 1. User connects Arduino to the Wifi Network using [url removed, login to view] . 1.1 Initial startup: This will turn the ESP8266 into an access point. The display will instruct you to connect

    $801 (Avg Bid)
    $801 Avg Bid
    17 bids

    Components: Arduino MEGA 2560, SIM900 GSM GPRS Shield, DHT11 Temperature & Humidity sensor module (pictures attached). I need someone that will explain to me how to connect this components(I have wires, breadboard...) and write a simple code. When I send a text from my phone, arduino should reply to me what sensor reads(in this case lets say temperature)

    $29 (Avg Bid)
    $29 Avg Bid
    12 bids

    ...schematics of a complete CCPWM power supply unit. It outputs PWM high amps current. It uses Mosfets. The schematic need some changes. Some parts of the schematics will be removed. Arduino Due will be replaced with Nano V3.3 and we will add a trimmer and a LED 4digits. Since the schematic is ready and we only remove parts and do few changes, you understand that

    $27 (Avg Bid)
    $27 Avg Bid
    6 bids

    We need to integrate features of the document scanner app in our ionic 3 app. You need to to build these features using OpenCV modules. Also, We need an animated ionic 3 splash screen using [url removed, login to view] effect in the background. More details are in the attached files.

    $198 (Avg Bid)
    $198 Avg Bid
    5 bids

    HI, I am looking for a server admin who can config a wifi camera to be viewed on web, which is the wifi camera is running in my office I want to view from home, currently I can do this through my phone app, but on web its not visible so i need some one to sort this. Thanks

    $22 (Avg Bid)
    $22 Avg Bid
    10 bids

    -Integrating camera 2 API with zxing -Developed camera module should provide ~4MP frames at ~10fps frame rate

    $416 (Avg Bid)
    $416 Avg Bid
    3 bids

    Development of basic LED animation for a demo Hardware is as follow: Arduino Nano 328P Neopixel RGB Matrix 8x8 LED WS2812B Coin cell CR2032 x 2 or Lithuim 3.7-4.2V The animation is described in the attached ppt. Animation must play as soon as Arduino has launched (no button interaction) Animation plays in loop. Specified speed in the pdf

    $112 (Avg Bid)
    $112 Avg Bid
    14 bids
    Arduino expert 5 days left
    VERIFIED

    i need to display, battery percentage, voltage, and remaining time to charge battery and remaining time for battery to be discharged. if youre interested let know then we shall discuss details. NOTE ; URGENT.

    $42 (Avg Bid)
    $42 Avg Bid
    23 bids

    i want an article written on arduino basics of about 500 words. it must be done in 24hrs.

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids
    Pulsera GPS con arduino 5 days left
    VERIFIED

    Realizar el codigo y mencionar lo requerido para crear una pulsera gps con chip 4G usando arduino nano , y una app movil la cual se comunique con el dispositivo para conocer la ubicacion

    $555 (Avg Bid)
    $555 Avg Bid
    18 bids
    Arduino Coding 4 days left

    Two push buttons are in a row (A,B) when A is pressed and then B is pressed, Count Up (+1) when B is pressed and then A is pressed, Count Down (-1) See if the amount of CountUp variable is over or under. If it is over 3, go into Manual Mode if it is under 3 go into Automatic Mode In the Manual Mode, i can turn ON OFF an LED with Swith1, but LED is could NOT be turned on/off acc...

    $38 (Avg Bid)
    $38 Avg Bid
    11 bids

    I have been designing a custom arduino mega 2560 and I am not able to program although I have burnt boot loader on the mega 2560 also there is a firmware on atmega 8uu that when I plug it to the compiuter It recognizes arduino mega 2560 on port... but I can not program it and IDE returns error

    $40 (Avg Bid)
    $40 Avg Bid
    5 bids

    Hardware: 4DUINO [url removed, login to view] TEMPERATURE & HUMIDITY SENSOR [url removed, login to view] SERVO [url removed, login to view] WATER SENSOR [url removed, login to view] N. 3 PERISTALTIC PUMPS Your task is to program our 4DUINO using the WORKSHOP 4 software and send us the source file for the complete upload on our 4DUINO. We have defined a 90-day program. The program,...

    $215 (Avg Bid)
    Local
    $215 Avg Bid
    1 bids

    We need to integrate features of the document scanner app in our ionic 3 app. You need to to build these features using OpenCV modules. Also, We need an animated ionic 3 splash screen using [url removed, login to view] effect in the background. More details are in the attached files.

    $166 (Avg Bid)
    $166 Avg Bid
    11 bids

    Just need a cam shooter. Just need a person who will run the cam and follow the speaker for conference lectures. It's a four day event, starting Thursday April 26th. This is at International Convention Centre on Darling Harbour in Sydney Australia. This job pays $1100 AUD, $275/day. Pay by check at the end of the conference.

    $852 (Avg Bid)
    $852 Avg Bid
    3 bids

    Design and build an Arduino based expression pedal with MIDI/USB controls and an OLED display. Design enclosure, the electronics, PCB and develop the software including mechanism to update software in the final product.

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    10 bids

    ...schematics of a complete CCPWM power supply unit. It outputs PWM high amps current. It uses Mosfets. The schematic need some changes. Some parts of the schematics will be removed. Arduino Due will be replaced with Nano V3.3 and we will add a trimmer and a LED 4digits. Since the schematic is ready and we only remove parts and do few changes, you understand that

    $31 (Avg Bid)
    $31 Avg Bid
    1 bids
    Arduino programmer 4 days left
    VERIFIED

    you need to write some codes for Arduino and connect to "thingspeak" ,draw circuits and diagrams and finally a report fixed budget

    $137 (Avg Bid)
    $137 Avg Bid
    37 bids

    Hello, I am looking for a freelancer who is familiar with Arduino serial control to write a sample sketch where a wav trigger board is controlled serially by an Arduino Mega. A list of events is described below. I have used the Wav Trigger board (Robertsonics / SparkFun) successfully with past projects that use physical switches to activate

    $129 (Avg Bid)
    $129 Avg Bid
    8 bids
    CAMERA ITS 4 days left

    We are looking for a capable electronic engineer who can design a CMOS Board Camera based on an Aptina AR0134, MT9M021 / 31 or similar sensor (1.3MPixel), needs to be Global Shutter. The camera will operate in snapshot mode, taking an on-demand image of an external trigger. (max 2 frames per second) It should have a good quality board bayer interpolation

    $7666 (Avg Bid)
    $7666 Avg Bid
    6 bids

    Repair "Camera Preview" Plugin must work on Android and IOS [url removed, login to view] BUG: ‘plugin not installed’ but ‘ionic plugin add’ says already installed and bugs when plugin is included to Ionic 3

    $123 (Avg Bid)
    $123 Avg Bid
    3 bids

    Project scope: For a personal project we are looking for a senior Arduino programmer who produces the code that is able to launch daily programs on a quarterly basis that activate the hardware listed below. Integrate our graphical interface and touch interactivity based on the 'screenshots' and program flow. All graphical assets will be provided

    $239 (Avg Bid)
    $239 Avg Bid
    19 bids

    I need an Android app. if you have/own sdk face api or mirror reality api is ...app. if you have/own sdk face api or mirror reality api is bonus.. app will track eyes and mouth on camera and put a choice of png with transparencies over it. like face swap but only in 2D. Must allow to reposition eyes and mouth, color correct on camera layer behind png.

    $806 (Avg Bid)
    $806 Avg Bid
    55 bids

    ...there is a relay. I need to have arduino programed in such a manner that the relay closes for a time equal to the input voltage value for every 10 seconds. For example when the input voltage u=3V the relay closes for 3 seconds for every 10 seconds. the project work range comprises of: -writing the code for arduino -simple wiring explanation -solution

    $102 (Avg Bid)
    $102 Avg Bid
    44 bids
    Onvif camera app 3 days left
    VERIFIED

    I have a local wifi camera app using onvif protocal I want to make change this app to network camera app I want to see camera vidoes on android app. If you have experience in the part, please bid on my project Thank you

    $536 (Avg Bid)
    $536 Avg Bid
    29 bids
    Video Camera Man 3 days left

    We need a professional camera man to record us for our youtube channel ps you have to be a good video editor too... Pay per video: £10 per hour This isn’t a full time job You will be required to come while we need something recorded

    $22 (Avg Bid)
    Local
    $22 Avg Bid
    2 bids

    I use LattePanda with an integrated Arduino Co-processor: ATmega32u4 (Arduino Leonardo). I use LV12. I would prefer not to migrate to LV14. Want to replace 6 virtual buttons with physical buttons accessed through the integrated Arduino Co-processor - via a dll or LV toolkit.

    $115 (Avg Bid)
    $115 Avg Bid
    6 bids
    camera app 3 days left
    VERIFIED

    I need an Android app. I would like it designed and built look like attached images. User take a picture using that app and ones user takes picture app automatically gives options to choose how vectorly or how look real look like carteenly image. If you feel what I want give message !

    $155 (Avg Bid)
    $155 Avg Bid
    13 bids
    Arduino code 2 days left

    A sunflower attached to the Arduino with two kind of sensors photoresistors and ALS-PT19 Light Sensor. When the sensors sense the light, the sunflower follows the light using the servo motor. The project idea is about the solo tracker, the characteristics of the sunflower always follow the sun. What makes this project special is that we will be using

    $183 (Avg Bid)
    $183 Avg Bid
    36 bids
    Arduino project 2 days left

    Hello I have a project to submit this week about fish feeder which it works with motion sensor and light sensor it moves the servo motor to move the bottle to feed the fish (drop the food) once a day it should have a condition that the servo won’t move more than once a day so only with motion sensor or light sensor if the owner of the fish isn’t in home.

    $148 (Avg Bid)
    $148 Avg Bid
    15 bids

    I need to communicate between two arduino Uno using Modbus RTU. One Arduino Uno as Master and another as slave. Need to use Max485 module with standard Half Duplex protocol. Need Complete working Master and Slave libraries. And also arduino code for both Master and Slave such that Slave will change one register value. And that address read in Master

    $461 (Avg Bid)
    $461 Avg Bid
    18 bids

    I need a skilled freelancer or agency in those field below: Arduino,Rpi,STM32, Electronics,PCB,Mecatronics,Robotics,3D product prototyping, CAD

    $46 / hr (Avg Bid)
    $46 / hr Avg Bid
    32 bids
    Arduino program 2 days left

    Arduino program help

    $154 (Avg Bid)
    $154 Avg Bid
    16 bids