Change router jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    8,057 change router jobs found, pricing in USD

    ...file are once in a while corrupting it. He did shut off all writes to the .cfg file and the corruption issue went away, but then when the client was switched to a server, that change was not being saved in the .cfg file so that programmer turned all writes back on bringing back the corruption issue. Bug 3: The switching between server and client, when

    $545 (Avg Bid)
    $545 Avg Bid
    6 bids

    ...able to configure the LoRa Gateway via the Web Server integrated in the MCU. Part 5. An Ethernet connector must be available on the PCB in order to connect to a switch or router and send the information back to a server. Part 6. Gateway power must be available via a PoE Switch or 240V / 120V to 48V DC power adapter. A built-in rechargeable battery

    $3880 (Avg Bid)
    Featured
    $3880 Avg Bid
    15 bids

    ...have Database -- Have portal for customer -- Push data using Python through Juniper Router / Switch equipment * Create/Delete BGP Connection * Create/Delete IP/route Prefix to import/export * Create/Delete Bandwidth Policer -- Pull data using Python from Juniper Router/ Switch equipment * Show BGP Connection * Show routing * Show interface status

    $1155 (Avg Bid)
    $1155 Avg Bid
    17 bids

    ...cores switch. every building contain of disrtbuted switch and it has 3 level. each level has access switch contain of set of pc's and laptops, if it possiple add at lest one router. First design one building then copy it many times then connect all buildings using 2 cores Give the IP (you can make it dynamic) and try the connection. If you want I

    $20 (Avg Bid)
    $20 Avg Bid
    1 bids

    ...bus configuration. The freelance consultant I need will help me select hardware (simple wifi/ethernet module) to connect the water heater to the cloud - through an existing router and create a cloud data base which will allow the user to see their water heater data and make changes via an app. - So I am looking for someone to help me with a turnkey solution

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    28 bids

    ...are two routers. Router 1 of Provider 1 is connected to the Internet via ADSL (100/40), Router 2 by Provider 2 via Coax (200/25). Site B is a virtual Linux server in a data center connected to the Internet with Gigabit (1000/1000). At Site A, an additional Linux-based router (x86 default hardware, 3 LAN ports for Router 1, Router 2 and LAN) will be

    $443 (Avg Bid)
    $443 Avg Bid
    17 bids
    PHP DEVELOPMENT 5 days left
    VERIFIED

    ...have a proprietary Router (Vibe) with a full suite of SNMP MIBs built on top of OpenWRT/Linux platform. RRD Definitions on LibreNMS can recognise standard OpenWRT/Linux definitions via SNMP but, because LibreNMS is a non MIB-based Monitoring system, it can not recognise the proprietary MIBs from the Vibe Router. Project: The router to monitor has a

    $416 (Avg Bid)
    $416 Avg Bid
    15 bids

    We looking for an experienced Cisco Engineer to help us configure a Cisco 2800 series router to switch VoIP (SIP) traffic

    $363 (Avg Bid)
    $363 Avg Bid
    18 bids

    ... | 2nd Gen 5.7 | | vue | ^2.5.17 | Recommended PWA libraries: "vue-router": "^3.0.1", "vuex": "^3.0.1" Infrastructure: App Engine Flexible Environment **Objective** To run a Vue.js template ([login to view URL])

    $22 / hr (Avg Bid)
    $22 / hr Avg Bid
    9 bids

    I have built a CNC machine know as the MPCNC. You can see it at www.v1engineering.com. I would like to add a touch screen HMI to it using the 7" TFT 800x480 touchscreen. I purchased the screen from Adafruit along with a RA8875 Driver board. You can see it here: ([login to view URL]) I do not know how to program it, nor do I have the time to learn from scratch. I can give graphic representa...

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    15 bids
    Modify two .net C# projects 2 days left
    VERIFIED

    ...application sending trade order of stock, or option to the TWS API of IB. • TWS API: this a windows API receiving orders from IBSampleApp. TWS is windows application acting as order router. There is no need to modify it. 2 What should be modified 2.1 The current communication flow: o Clicking “send” button of IBSampleApp by a user will call(a reference call)

    $207 (Avg Bid)
    $207 Avg Bid
    24 bids

    ...application sending trade order of stock, or option to the TWS API of IB. • TWS API: this a windows API receiving orders from IBSampleApp. TWS is windows application acting as order router. There is no need to modify it. 2 What should be modified 2.1 The current communication flow: o Clicking “send” button of IBSampleApp by a user will call(a reference call)

    $200 (Avg Bid)
    $200 Avg Bid
    2 bids

    ...relay board... We don't know the MQTT protocol so you can use a router with OpenWrt. The router with OpenWrt, for example: https://www.amazon.it/GL-iNET-GL-AR300M16-Pre-installed-Performance-Programmable/dp/B0777L5YN6/ref=sr_1_5?ie=UTF8&qid=1547504568&sr=8-5&keywords=openwrt&th=1 On this router there is a OpenWrt operating system which is a Linux Operat...

    $218 (Avg Bid)
    $218 Avg Bid
    8 bids

    Would you be able to clean up firewall rules in my pfSense router? I’ve got quite a few in support of VPN connections. The router resides on an ESXi VM. I can give you access through TeamViewer. I obviously want rules that are necessary. I don’t want my VPN server broken when cleaning up the rules. Will consider you for future work on the network

    $20 (Avg Bid)
    $20 Avg Bid
    1 bids

    ...company that is looking for someone to colocate our mini Intel NUC server (5,2" x 5,2" x 3.5" in size) by connecting it to your residential internet connection (to your internet router via ethernet cable). We will pay you $250 monthly, long term, some of our hosts have been with us for 3 years and running. We set up the server in such way that ONLY the

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    ...company that is looking for someone to colocate our mini Intel NUC server (5,2" x 5,2" x 3.5" in size) by connecting it to your residential internet connection (to your internet router via ethernet cable). We will pay you $250 monthly, long term, some of our hosts have been with us for 3 years and running. We set up the server in such way that ONLY the

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    ...company that is looking for someone to colocate our mini Intel NUC server (5,2" x 5,2" x 3.5" in size) by connecting it to your residential internet connection (to your internet router via ethernet cable). We will pay you $250 monthly, long term, some of our hosts have been with us for 3 years and running. We set up the server in such way that ONLY the

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    ...company that is looking for someone to colocate our mini Intel NUC server (5,2" x 5,2" x 3.5" in size) by connecting it to your residential internet connection (to your internet router via ethernet cable). We will pay you $250 monthly, long term, some of our hosts have been with us for 3 years and running. We set up the server in such way that ONLY the

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    ...company that is looking for someone to colocate our mini Intel NUC server (5,2" x 5,2" x 3.5" in size) by connecting it to your residential internet connection (to your internet router via ethernet cable). We set up the server in such way that ONLY the traffic of 4 popular UK streaming web sites ever reaches the Intel NUC server. We have such arrangements

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    I would like to set up a cloud based Captive Portal server using Chillisoft, radius server and websever that can allow the login page to be e...condition of use of the public wifi service. Authentication for access will be through social media and/or SMS. It will be use on multiple locations, and configurations on the router will need to be advice.

    $616 (Avg Bid)
    $616 Avg Bid
    1 bids

    I have a server running Windows Server 2016 Standard version in residential house behind a router. (ISP dynamic ip). Trying to host a php website using IIS. Some features/roles installed but need help configuring them. Need to transfer a domain name parked at [login to view URL] to my server. include setting up DNS service. Need to configure the IIS to for

    $89 (Avg Bid)
    $89 Avg Bid
    7 bids

    ...file are once in a while corrupting it. He did shut off all writes to the .cfg file and the corruption issue went away, but then when the client was switched to a server, that change was not being saved in the .cfg file so that programmer turned all writes back on bringing back the corruption issue. Bug 3: The switching between server and client, when

    $518 (Avg Bid)
    $518 Avg Bid
    12 bids

    ...ICMP ECHO_REQUEST packet to a specific host, and waits for the host to return an ECHO_REPLY packet. The TTL (time-to-live) value of the packet determines the max number of router hops. If the request does not reach the host, the sender is noted back with one of the following errors. TTL Expired in Transit Destination Host Unreachable Request Timed Out

    $25 (Avg Bid)
    $25 Avg Bid
    10 bids

    Looking a template for Onedesk. template should be in powerpoint. About Onedesk- This desk for consumer needs, We are the router can show them current place what consumer looking for..

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    13 bids

    Sistema web para roteirização de itinerários com integração da API do google Maps. Tenho todo o projeto escrito em um documento que posso enviar para ter ideia de orçamento.

    $2269 (Avg Bid)
    $2269 Avg Bid
    28 bids

    Supply step by step guide Supply virtual machine (VMware ova etc) Must support BGP, RIP, OSPF etc. Example DMVPN Hub: interface Tunnel11 ip address [login to view URL] [login to view URL] no ip redirects ip mtu 1400 ip nhrp authentication 1234 ip nhrp network-id 1 ip tcp adjust-mss 1360 tunnel source GigabitEthernet15 tunnel mode gre multipoint tunnel key 1 tunnel protection ipsec prof...

    $101 (Avg Bid)
    $101 Avg Bid
    6 bids

    Hi Dears Simply when the user try to change his wi-fi password he need to open webpage and write the router IP then goes with some process but many users can't do that ... so i need to create simple app using react-native to make it more easy .please check the attached file for more information

    $160 (Avg Bid)
    $160 Avg Bid
    15 bids

    We have a software product that requires us to connect to the server where the database is housed which is at our office. We need a VPN server setup on a DD-WRT flashed router for access to that database from off-site locations. OpenVPN setup preferred. Windows 10 Pro computer is the server

    $51 / hr (Avg Bid)
    $51 / hr Avg Bid
    21 bids

    need a pfsense/expert admin who can set up a network of 5 pfsense soft router connected to central VPN server located in AWS/Azure. 5 pfsense router would be connected via multiple internet links in load balancing. detailed discussion would be shared with interested admin

    $158 (Avg Bid)
    $158 Avg Bid
    13 bids

    ...wherever a hotspot is located. You simply search for the xfinitywifi SSID, connect, then open a browser to enter your account login credentials to access the service. We have a router that USED to work with the xfinity hotspots, and all of the sudden, it stopped working. We were able to use WISP to search for the hotspot, connect to it, and after we logged

    $25 (Avg Bid)
    $25 Avg Bid
    1 bids

    Sim aggregator : Phase 1 We have a centos Machine with 2 NIC cards and 1 wireless adapter. We want to use this machine as router, via 1 nic port and Wireless Adapter or either only wireless adapter as per our chosen input The machine should be able to provide DHCP services automatically to any workstation connected to it. I want to lock display of

    $323 (Avg Bid)
    $323 Avg Bid
    8 bids

    I am looking for Network Expert required with no-ip connection to the home s...Network Expert required with no-ip connection to the home sever to help me via teamviewer to install the home server is connect via NO-IP service and need to open ports in router to connect my wowza server, what is working fine locally but not with no-ip. Max one hour job

    $26 (Avg Bid)
    $26 Avg Bid
    3 bids

    I have software for producing cabinet doors designed in vba. I would like to have a 2d nesting program that I could integrate. You should enter materials and part to be ...have a 2d nesting program that I could integrate. You should enter materials and part to be nested. I would like to be able to save the nested sheets and export gcode for Cnc router

    $460 (Avg Bid)
    $460 Avg Bid
    12 bids

    ...and SOHO series FreePBX (asterisk running PJSIP) Ethernet switches Nortel/Avaya, Arista, 3com Microsoft SQL 2016 Standard with AG (to be added) Multitech rCell 100 Cellular router HP Servers with ILO (to be added) Proxmox cluster with CEPH cluster FreeNAS Website monitoring (to be added) Most host are installed and working. There is some stuff that needs

    $166 (Avg Bid)
    $166 Avg Bid
    1 bids

    Hi, ongoing daily basis programing for cnc router works. I'm looking for someone to do cutting programs for cnc router. payment will be on an hourly rate. please message me for more details.

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    21 bids

    ...the new vpn server(s) 3. Client can choose about locations (US / UK / DE / NL /FR and so on) based on this information a specific part of the zip will be extracted to the router ([login to view URL]) 4. To get the VPN working some additional settings should be added in the extracted .ovpn files . --------------------------- "#mute 10000

    $292 (Avg Bid)
    $292 Avg Bid
    2 bids

    install LAN for CNC-Router as enclose and follow instruktion as enclose for program setting. The "Netzwerkkarte" Network card, must also has a automatic Crossover, you please check.

    $42 (Avg Bid)
    $42 Avg Bid
    6 bids

    I have a NAS in my network. I am trying to create QoS and prioritize inbound and outbound traffic to that. The NAS is connected with 4 port link aggregation in an US-16-150W (firmware v4.0.15) and this switch is connected to an ER-X (firmware v1.10.8). Our internet line give us 100Mbps up/down. What I am looking to achieve is the following: 1. I want to guarantee an internet bandwidth of 20M...

    $166 (Avg Bid)
    $166 Avg Bid
    13 bids

    ...use for directing traffic to the correct Rssocks device. - Each unique Identifier is a unique set of random "Username and Password" - That way we can connect into specific router with correct username+password. - The Reverse Socks5 should be able to handle clients in 10,000 or 100,000 connections. - [login to view URL] - https://github

    $166 (Avg Bid)
    $166 Avg Bid
    6 bids

    ...through express, need two things done: 1. troubleshoot existing code make sure it works and everything looks good, setup. 2. allow for ng serve to route through express using router, created a [login to view URL] from [login to view URL], help make it work. 3. test with sample

    $38 / hr (Avg Bid)
    $38 / hr Avg Bid
    18 bids

    Configure B-ACD Cisco CME which is basic call attendant service on Cisco 2911 CME Router

    $25 (Avg Bid)
    $25 Avg Bid
    2 bids

    There is a game on the Steam platform called "Slay the Spire." When you start a game, the PRNG engine randomly generates a Seed #. That Seed # determines everything that will happen throughout your play of the game. What I am looking for is a program that knows what is going to happen in advance - because I have already told it what I want to happen - and the outcome is the Seed # I ...

    $372 (Avg Bid)
    $372 Avg Bid
    7 bids

    Hi! I need to build a standard easy to roll-out installation for technological LAN built on one WiFi compatible router. My preference would be Mikrotik [login to view URL] . The architecture of the solution is as following: Uplink connection by a cable or WiFi (WISP mode) with DHCP Client on. Downlink LAN is

    $137 (Avg Bid)
    $137 Avg Bid
    3 bids

    Need webapp where there is a button to reset my router( locally [login to view URL]) and show my dsl status( speed, upstream, downstream speed). No popup, should hide all commands to router . Source code should be shared. Should have a description to how to change the password , username and router ip address

    $16 (Avg Bid)
    $16 Avg Bid
    3 bids

    Need an web app to reboot my router and get information about my connection( speed, upstream, downstream)Dlink [login to view URL] [login to view URL] code

    $14 (Avg Bid)
    $14 Avg Bid
    5 bids

    I need some smart IT guys for router configuration all over India.

    $17 (Avg Bid)
    $17 Avg Bid
    23 bids

    ...installed a new router (Meraki MX68) and changed server IP address. After updating our CNAME and A records to point to our new WAN address - the front entry page works, however when I access the osc (store) site or Admin - I receive an error "Unable to connect to database server!". No files were edited or modified on the server during the change, so the problem

    $28 / hr (Avg Bid)
    $28 / hr Avg Bid
    17 bids

    ...express/lib/router/[login to view URL]:5) at next (/user_code/node_modules/express/lib/router/[login to view URL]:13) at [login to view URL] (/user_code/node_modules/express/lib/router/[login to view URL]:3) at [login to view URL] [as handle_request] (/user_code/node_modules/express/lib/router/[login to view URL]:5) at /user_code/node_modules/express/...

    $86 (Avg Bid)
    $86 Avg Bid
    2 bids

    need a hotspot router with thermal printer all in one either mikrotik or openwrt

    $24 (Avg Bid)
    $24 Avg Bid
    3 bids

    Goal is to design a front cover of a wifi router.

    $74 (Avg Bid)
    $74 Avg Bid
    41 bids