Custom firmware bullet jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    10,585 custom firmware bullet jobs found, pricing in USD

    We are looking for developers/coders specialized in cryptos and blockchain for a project of firmware development. We would like to get a firmware to overclock this mining hardware i.e. graphic cards (GPU) RX580 8Go. Which are the maximum hashrates performances you can get?

    $2425 (Avg Bid)
    $2425 Avg Bid
    1 bids

    Position: Embedded Firmware Testing Engineer (Contract for 6 months). Mandatory Skills: Strong C Programming skills. Good knowledge on firmware and device driver verification and Validation for DSP and Microcontroller platforms. Strong debugging skills with JTAG and boot-loader environments. Experience in bring up of peripherals like I2C, SPI, MMC

    $361 (Avg Bid)
    $361 Avg Bid
    5 bids

    ...be plaigarism free. I will check it with copyscape. 5. Use simple language and avoid passive voice as much as possible. 6. Write short paragraphs and include sub titles and bullet points wherever possible 7. Need a minimum of 2 set (10 posts) in a day 8. Posts have be sent in sets of 5 9. Each post has to be a single word file. I can pay Rs. 15 per

    $15 (Avg Bid)
    $15 Avg Bid
    16 bids

    We are looking fore someone who is proficientin embedded systems and can write firmware, bootloaders, e squared c code etc. We want to write a bootloader firmware to function on our proprietary PCB allowing us remote access to do updates etc.

    $2406 (Avg Bid)
    $2406 Avg Bid
    19 bids

    ...development for a small household appliance (in positive case, I must be able to pass CE quality certification): - optimal solution have to be checked together; - simple testing firmware included (eg: C, Lua,... I have already coded some working example); - files available for further use (eg: for KiCad); 2- prototype PCB produced in small testing series

    $530 (Avg Bid)
    $530 Avg Bid
    19 bids

    Develop fully commented C source code for nRF52840 Developerment kit. Using SDK 15.2 and Softdevice 6.1.0 with GCC compiler and eclipse project. Develop test harness to verify operation (prefer python using pc-ble-driver-py) Will require FTDI TTL cable for second uart

    $563 (Avg Bid)
    $563 Avg Bid
    8 bids

    ...clinical data scientist in need of an acquisition system for a lab project. I might make a few to share with collegue and thus would like all of the resultant PCB, schematic, and firmware files. Everyone has probably seen the many EKG devices on the market these days that allow you to view and capture a single lead of EKG. My project requires acquisition 12

    $2852 (Avg Bid)
    $2852 Avg Bid
    20 bids

    ...the streets of South Africa jumping over opsticals like burning tyres, rocks, car parts, potholes and more. Then from the front police shoot at you every now and then. If the bullet hits you you die, if you dont get over a opstical you die. The further you run the more points you score. Each level the little man will run faster with diffrent opsticals

    $304 (Avg Bid)
    $304 Avg Bid
    28 bids

    INDIAN DEVELOPERS ONLY! I need an expert Xamarin dev for Native iOS and Android apps to interface with custom built hardware. I will supply the hardware but you will need to assemble it, load the firmware i send you and then write the mobile apps to interface. Some experience with Arduino is preferred but not necessary. I have done a few projects

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    12 bids

    I am searching for an experienced embedded firmware engineer / software developer with experience in ARM mbed OS who is helping me with writing the firmware for a project incl. the following components: 1) MCU Nordic nrf52 (Fanstel BT832 or BT840) 2) Gyro incl. DMP (Invensense mpu9250/ICM20689 ) 3) Sound decoder (VLSI vs1053b) 4) Serial (SPI) NAND

    $1709 - $3418
    Sealed NDA
    $1709 - $3418
    35 bids

    Hi All, I have a powerpoint presentation in plain black & white slides with bullet points. The presentation is for online lead generation. I'd like to make it more web 2.0 with creative fonts / images / funnel images etc as needed. I would like slides to be easily duplicable as i need to add another 10 slides to it. I can give you maximum 7 hrs to

    $89 (Avg Bid)
    $89 Avg Bid
    72 bids

    ...convenient way to display graphical information that would support the speaker and supplement the presentation). 4-Limit bullet points & text(Your presentation is for the benefit of the audience. But boring an audience with bullet point after bullet point is of little benefit to them. Which brings us to the issue of text) 5-Limit transitions & builds animation(Use

    $20 (Avg Bid)
    $20
    2 entries

    ...of bullets you have (This depends on your gun type (between 1 and 25) (The pistol has ten bullets, the shotgun three bullets, the machine gun 25, the sniper has one bullet) ==> A bullet symbol with a bar or a number that shows the number of bullets you still have Three less important things: -The selected type of gun (you can choose between a pistol/shotgun/

    $57 (Avg Bid)
    $57 Avg Bid
    1 bids

    I need someone capable of reverse engineering and hardware i have a software that works for a specific tool and want someone to make the hardware for me or edit firmware of existing hardware contact me for further informations

    $451 (Avg Bid)
    $451 Avg Bid
    5 bids

    ...this in a systematic way. 1) We write a script, including in the script the file name of any images which will be shown at that specific moment within the video, an any bullet-points we want to be highlighted on screen. 2) We record the on-camera spokesperson delivering the script on camera and then cut this into specific clips. 3) We select

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    26 bids

    ...presentation encompasses graphs / data that present how companies of a given product are doing on the market for the past year – in terms of value sold and items sold. We need short bullet analysis remarks for each slide separately that highltigh: • What the data is showing: market trend, anything special about how the companies are evolving the presented time

    $32 (Avg Bid)
    $32 Avg Bid
    11 bids

    I need you to develop firmware for me. I would like this firmware to be developed for Windows using C or C++.

    $117 (Avg Bid)
    $117 Avg Bid
    9 bids

    I have an IP camera with Linux inside (BusyBox). I have no access to web interface, it is password protected and I do not know the password. So, I neet that password and root access to the shell of the installed Linux itself. I have taken a full dump from the camera`s EEPROM. But I am not a specialist in embedded systems, so I do not know how to access files. AFAIK if I access files, I will have ...

    $31 (Avg Bid)
    $31 Avg Bid
    4 bids

    I want to customise firmware for Chinese mag250. Original firmware of mag250 has clone kill code so I need someone to help me with that issues.

    $30 / hr (Avg Bid)
    $30 / hr Avg Bid
    2 bids

    I have an access point (DRAYTEK) which I am attempting to connect to my network. i need someone to login and c...which I am attempting to connect to my network. i need someone to login and configure it here is the manual [login to view URL]

    $31 (Avg Bid)
    $31 Avg Bid
    28 bids

    ...experienced embedded engineer or team of engineers to develop an OBD II device from concept to pilot production. The tasks will include the schematic design, PCB layout, BOM, firmware development, production testing software, App, Web design, functional prototype. This is a sample of what I'm looking for: [login to view URL]

    $3206 (Avg Bid)
    $3206 Avg Bid
    20 bids

    ...of phones that I need to have auto firmware update when they are factory reset. I have a DHCP 160 option pointing to HTTPS server for provisioning. Firmware is also on that HTTPS server but my phones connect to my SIP server correctly and ignore the firmware update task. I need help getting my phones to force firmware upgrade when they come up and provision

    $10 - $30
    $10 - $30
    0 bids

    ...labeled either above or below the button. When on the button would say on and be green. When off the button would display off and be red. This phase focuses more on software/firmware that I would assume lives on the raspberry pi. The controller receives inputs from the touch screen and outputs signals to turn on and off power to the pumps. If it makes

    $2263 (Avg Bid)
    $2263 Avg Bid
    9 bids
    NRF52832 Firmware development 14 hours left
    VERIFIED

    I will provide detail via PM. thank you

    $315 (Avg Bid)
    $315 Avg Bid
    13 bids

    I Need project: RFID EM 125Khz IC reader ( common chinese rfid device) + HID 134Khz reader selectable Design Hardware frontend and Software in C using LPC111...selectable Design Hardware frontend and Software in C using LPC1114 microcontroller No use module, need analog frontend ( amp op and LPC1114 and some discrete devices only) Firmware write in C

    $453 (Avg Bid)
    $453 Avg Bid
    7 bids

    ...subjects to write about. I don’t need articles produced by spinner, I need original & unique SEO articles. Article requirements: -200 to 250 words - 2-3 Paragraph - 1-2 bullet point list - Must contain thematic keywords (included) - No redundant words - No Plagiarism. All texts must be unique. Freelancer is not paid if copy-scape premium failed

    $46 (Avg Bid)
    $46 Avg Bid
    8 bids

    I'd like to develop PCB board using altium designer. I have the block diagram for device I am gonna develop. Candidate MUST have professional skills and ex...board using altium designer. I have the block diagram for device I am gonna develop. Candidate MUST have professional skills and experience in circuit design, PCB design and firmware programming.

    $10 - $30
    Sealed
    $10 - $30
    4 bids

    I'm looking for smart watch firmware developer who knows Xiaomi Mi Bunny Watch 2.

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    6 bids

    We are looking for an experienced C developer with good english skills for maintaining and improving on a hardware wallet firmware. Applicants will have the chance to work on a challenging long term project.

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    42 bids

    ...coding programs and recharging the battery 7. 2-3 sample buttons on the device 8. Test LEDs before each port and buttons 9. Basic firmware and boot-loader programs are to be included 10. Some open sourced SDK for developing firmware and embedded applications Deliverables: 1. Schematics 2. PCB Layout 3. Gerber Files 4. Bill of Materials 5. Assembled PCB

    $483 (Avg Bid)
    $483 Avg Bid
    13 bids

    I am looking for a talented ESP32 firmware developer who can do the task of switching WiFi and BLE in ESP32.

    $194 (Avg Bid)
    $194 Avg Bid
    13 bids

    I need help making and compiling a simple Makefile that will be used for uploading a firmware for a Teensy Board (Similar to Arduino).

    $32 (Avg Bid)
    $32 Avg Bid
    7 bids

    ...websites created. They must: - Look stylish and modern - Be perfectly responsive on mobile and tablet - Contain logo, a few captions/graphics (which you will need to create), bullet points, text, YouTube video integration, live chat integration, social media, contact details, contact us form - Be easy to edit from the back end Logo, domain name and hosting

    $29 (Avg Bid)
    $29 Avg Bid
    19 bids

    I will provide You pinout and config in CubeMX. The MCU is STM32L071RBT. I need a basic structure of FreeRTOS-based code (just an "example") with the following: + Task that will be executed every 15 minutes (The task will read data from UART sensor) + MCU will go to sleep state / low-power mode and power off all the peripherals between the task execution - probably will be woken up by...

    $164 (Avg Bid)
    $164 Avg Bid
    8 bids

    i want firmware to be controled from alexa voice and blink app

    $110 (Avg Bid)
    $110 Avg Bid
    4 bids

    Background of project: Some IoT devices have a firmware with a IP pointed to a server which is no longer available, we have setup another server with different IP to replace the old server, so these IoT devices 's firmware need to be updated with the new server IP. Tasks: 1. Set up an environment which has an virtual IP to "cheat" these IoT device to

    $146 (Avg Bid)
    $146 Avg Bid
    8 bids

    Need assistance with BLE firmware set up for battery operated sensor. Battery management and experience with TI BLE projects essential.

    $575 (Avg Bid)
    $575 Avg Bid
    16 bids

    Proofreading of a one-page cv. 15-mins job Pls make sure the verbs and adjectives used in the bullet point are consistent

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    80 bids

    OBD2 + I/O + GPS + LORA = Pcb design, Firmware and Prototype Development.

    $1395 (Avg Bid)
    $1395 Avg Bid
    16 bids

    I need a firmware that can support 100 PID for CAN protocol or universal protocols.

    $402 (Avg Bid)
    $402 Avg Bid
    2 bids
    $8 / hr Avg Bid
    12 bids

    Hi there :) I sent you a .r... So you i can see the photo on the camera but on my pc no. i have made this photos encrypted with nikon d7000 that use modiffied firmware. i need a decryptor to can use this camera without update the firmware with the original verision from nikon website. if yo can do that you are the man that i'm looking for

    $435 (Avg Bid)
    $435 Avg Bid
    3 bids

    ...should be "special support for startups", the last in the. In your offer please - business analysis, system analysis, software development,database design and development,firmware development (embedded software for micro-controllers),technical support for o users, including first support line, IoT software and hardware design, IIoT (Industrial IoT)

    $118 (Avg Bid)
    $118 Avg Bid
    53 bids

    OBLORA Objective; a device that can report to the server, the status of its host at all set instance. Reports; we have three (3) types of report aim...disconnection. Power; this device is powered by the host body LoRa; communicates with the LoRa gateway MCU; cordinates the entire process, each MCU to bear its unique ID, firmware to be enbedded into it

    $1024 (Avg Bid)
    $1024 Avg Bid
    7 bids

    I have received the components and the PCB. 1) I will assemble the different parts of the circuit and test their devices with very simple programs. Receive a serial port frames Send a serial port frames Receive a canbus frames Send a canbus frames 2) I assemble the LED circuit and test the LEDs with simple program for handle led drivers by SPI interfase. 3) Write the final program. I will rep...

    $25 (Avg Bid)
    $25 Avg Bid
    2 bids

    ...[login to view URL] I need a firmware that using GPIO connection has a push button or toggle switch (needs to be configurable by parameter) that execute the turn on and off a room (also this configurable by parameters). If the configuration will be with push button, the firmware need to have an extra function to dim the light, first

    $276 (Avg Bid)
    $276 Avg Bid
    10 bids

    There are two boards: nRF51822 (Raytac MDBT40) and a sensor Si1147. In scope for this project is the creation of the sensor driver and exposing BLE Profiles. The project is done when: - the code compiles with GCC, commandline - after flashing of the hex, following profiles are present in the peripheral node: 1) UV Index 2) Ambient light 3) Proximity -- plus the one for the configuration of the ...

    $234 (Avg Bid)
    $234 Avg Bid
    6 bids

    I need a eye catching and professional powerpoint about Boracay. Accurate and precise bullet point with all the information needed with it. Including high quality pics and videos that will go along with it. Something that will engage the audience and clients to visit Boracay. Like marketing it and explaining what makes it special. The Title will

    $71 (Avg Bid)
    $71 Avg Bid
    25 bids

    ...next 1-year support. We plan to have this RFID Reader and Controller developed and sell in the Middle East and African countries. The device should be very stable. The code/firmware should be easily upgraded. Here are our requirements for integrated 125 kHz RFID Reader and Controller which can be used in School for Student Attendance: 1) We need a 125

    $1023 (Avg Bid)
    $1023 Avg Bid
    15 bids

    The task is to design a small PCB that controls the logic to interface to two power supply modu...selected. Likewise the micro which would come from the PIC or AVR families. Deliverables for the project will be: • schematics • pcb artwork • BOM • source code for the firmware, along with the build instructions using the PIC/AVR design tools

    $451 (Avg Bid)
    $451 Avg Bid
    20 bids