Electronic usb jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    8,125 electronic usb jobs found, pricing in USD

    ...about linux. Therefore I need help to create a Bash script for a USB-drive that autoruns on insertion of the USB drive, set proxy settings for apt (/etc/apt/apt.conf.d/95proxies), upgrades the machine and then install software listed below. Script functionality: - Autorun when USB drive with script is inserted in the Xubuntu machine - Verify connectivity

    $100 (Avg Bid)
    $100 Avg Bid
    1 bids

    Just one function Transfer file (e.g. .png or .jpg) to Android SD card via OTG use, this OTG will connect to GPIO of Raspberry Pi to Android device connector via USB OTG. Raspberry Pi will run by Debian system or Ubuntu. It will trigger by one physical button which connected to GPIO. Once GPIO level is high, procedure will be started to transmit files

    $135 (Avg Bid)
    $135 Avg Bid
    7 bids

    ...connected to the custom device with its own USB cable. Custom device will receive that input and modify the input. The modified input will change it so if the left mouse click is pressed and held, it will continiously click at a set speed in the code. Custom device will then get that changed output following with a USB and it will be connected to the PC.

    $211 (Avg Bid)
    $211 Avg Bid
    6 bids

    ...realistic. I have a very simple and rather small PCB I need designed (roughly 3.5cm x 2.7cm), essentially a bare bones (2) port USB 2.0 HUB (non-powered) with a microSD card reader connected via one of the hubs ports (direct not via USB), and a MicroUSB Type-B Female connection for the other port. The smaller you can make it the better, although I would like

    $130 (Avg Bid)
    $130 Avg Bid
    56 bids

    We have 12 workstations accessing cloud server for an electronic medical records system made by "eclinicalworks". I need help with configuring all the workstation setttings on about 12 - 15 workstations at the office by following the eclinicalworks recommendations to make the necessary changes to each workstation setting by connecting to it remotely

    $178 (Avg Bid)
    $178 Avg Bid
    10 bids
    Online electronic store -- 2 4 days left
    VERIFIED

    I need a new website. I need you to design and build a website for my small business. online electronuc store

    $78 (Avg Bid)
    $78 Avg Bid
    19 bids

    I need to link receipt printing of Odoo's POS to an USB Serial ESC command receipt printer on Android, the documentation of the printer has attached below, the SDK (.jar file) will be provided.

    $70 (Avg Bid)
    $70 Avg Bid
    1 bids

    Need C# expert who has experience in data hooking. I want to capture print data which is sent to printer through LPT port or USB. UI is not important, You can show capture data in simple form. I want logic code mainly. if you're confident in this field, please bid for me. My budget is 50$. You must write "Capture" tag at a head of your bid message.

    $110 (Avg Bid)
    $110 Avg Bid
    6 bids

    Need C# expert who has experience in data hooking. I want to capture print data which is sent to printer through LPT port or USB. UI is not important, You can show capture data in simple form. I want logic code mainly. if you're confident in this field, please bid for me. My budget is 50$. You must write "Hook" tag at a head of your bid message.

    $178 (Avg Bid)
    $178 Avg Bid
    11 bids

    We need a project that reads USB printer information using PJL commands, @PJL INFO PRODINFO and @PJL INFO PAGECOUNT. The application will only read on USB printers only! No readings will be made on the network printer! The code should be done in Visual Studio so that our programmers can enter the code in our project.

    $532 (Avg Bid)
    $532 Avg Bid
    5 bids
    Trophy icon Logo for a usb cable company 7 days left

    I need a 3d logo for a company that seel USB-c cables, it must have a monkey and something that is similar to USB cable. I need a black background and something innovative a project. the name of the website is [login to view URL]

    $180 (Avg Bid)
    Guaranteed Sealed
    $180
    81 entries

    Small local company hiring a local person to provide graphic design, full seo, some website design support to our company.

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    20 bids

    We need a persion who can set up a fax servi...text) We don’t need you to develop this, just need to install and configure a existing software. We try to configure hylafax but could not get it to work. Here is the external USB fax modem we are using: https://www.amazon.com/gp/product/B0013FDLM0/ref=ppx_yo_dt_b_asin_title_o09__o00_s00?ie=UTF8&psc=1

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    3 bids

    What I am looking for is lyrics for a new song. Something similar to my song Kaleidoscope [login to view URL] The theme is outer space or atmosphere like. I am mainly sticking to an 80's sound a song I have that has no lyrics yet is here [login to view URL] so either lyrics to a new song or for my song Defiance. Any questions just ask

    $26 (Avg Bid)
    $26 Avg Bid
    3 bids
    Electronic topic 3 days left

    Write report about energy harvesting

    $55 (Avg Bid)
    $55 Avg Bid
    8 bids

    I need a logo edited and a company seal logo created.

    $23 (Avg Bid)
    $23 Avg Bid
    23 bids

    I need support from a South Korean expert (or someone who speaks South Korean) in the following: - Provide deep legal and technical analysis of the Electronic Promissory notes system implemented in South Korea. - Track and user experience in screen shots, with comments on the beneficiary journey. - Provide a summary of the legal/operational issues

    $4174 (Avg Bid)
    Local
    $4174 Avg Bid
    5 bids

    My name is Beatriz Martín, and I'm COO of LiveLink, a Startup in which we are developing an IoT device for motorcycles. It can detect any accident suffered in a motorcycle and warning the emergency services with the location and medical information of the victim. Currently, we are developing out third prototype of the first product we will launch o the market and we already have agre...

    $4609 (Avg Bid)
    $4609 Avg Bid
    28 bids

    Hello, We are looking for a mobile trading platform like [login to view URL] & [login to view URL] We would like to make a similar platform like them Please only bid if you can able to complete it and you have relevant experience in the same project. Need the Data and Exactly same replica for these websites. We have already been let down by previous developer who couldn't able to d...

    $796 (Avg Bid)
    $796 Avg Bid
    37 bids

    You have to know: Basic characteristics and operations of bipolar (BJT) and field effect (FET) transistors. Biasing of active devices. Current mirror. Maximum output signal analysis of the transistor circuits. Power amplifiers; A, AB, B power stages. Small signal analysis of common base (gate), common emitter (source), common collector (drain) amplifier stages. Frequency response of the amplifier...

    $23 (Avg Bid)
    $23 Avg Bid
    4 bids

    I need some help / someone to cast an eye over design work Will pay hourly based on live help

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    12 bids

    I have a HID based USB caller id device which i want to use to get caller id on my pstn and inject the callers number and date and time in mysql database . If you can do that please bid this will be only on centos7 linux environment and it needs to run 24/7 on the server if it fails anytime it needs to try and reconnect or send failur email to admin/root

    $135 (Avg Bid)
    $135 Avg Bid
    6 bids

    Hello, I am looking for someone who...someone who can buid a SIMPLE bash script, the script must be able to encrypt a USB partition (all the partition) and decrypt with a PGP key. I must be able to launch like this : ./[login to view URL] --uuid (usb key) --pgpkey --encrypt/decrypt if the pgpkey is good the mount usb key and decrypt if pgpkey then error message

    $29 (Avg Bid)
    $29 Avg Bid
    6 bids

    I need the best rates to design an electronic press kit for a musician. This would be a 5 minute promotional video that has artist performance footage, pictures and music files. Edited into a 3-4 minute cut.

    $148 (Avg Bid)
    $148 Avg Bid
    7 bids

    Hello everyone, We are looking for a press kit to present our company to potential influencers, ambassadors and customers in a creative and compelling way. About the company : We are a global job portal that portal that connects employers with top talents in the Biomedical (Pharmaceutical, Biotechnology, Medical Technology) and Healthcare industry Preferred format : Horizontal A4 (210mm H x 297...

    $113 (Avg Bid)
    $113 Avg Bid
    24 bids

    Built electronic form using Gravity Plugin and Wordpress: I have PDFs forms that want them to be editable in Wordpress website and to be signed electronically. I have the plugin with all the add-ons​.

    $25 (Avg Bid)
    $25 Avg Bid
    26 bids

    ...Pagnottelli chief engineer at Siralab Robotics, our company is involved in design of autonomous systems like aerial or marine drones. The current project is to design and electronic board the can be used to control led drivers using a DALI bus or using a 0-10V interface. The MCU unit must be an ESP8265 and the The boards must contains all circuits

    $2443 (Avg Bid)
    $2443 Avg Bid
    34 bids

    Hi, I would like to build a Device which receives Signal through Wifi Receiver and makes a connected Iron cube to a magnet with the specified Polarity (North or South)

    $97 (Avg Bid)
    $97 Avg Bid
    6 bids

    I have a place say an app or on my computer something is written. I want to get that information secretly through an earpiece or may be some other electronic method or we can even use a blindfold which shows us whats written on computer. We can connect through bluetooth.

    $353 (Avg Bid)
    $353 Avg Bid
    11 bids

    ...setup a Rpi3 with a USB webcam(Not RPiCam) in her studio, that would allow her to record audio/video her routines by controlling the Start/Stop of USB Webcam via a Webpage. and/or by a button connected to the GPIO of the Pi. Ive found similar projects online that only work with the RPI Camera not USB Cameras, that do not work with USB cameras, included

    $163 (Avg Bid)
    $163 Avg Bid
    9 bids

    Necessito de uma powerbank com as seguintes especificações: - Capacidade: entre 2000 e 3000 mAh - Input: USB-C (e se possível com wireless charging) - Output: USB-C e wireless charging - Dimensões: até 9*5.5*0.5 cm

    $2715 (Avg Bid)
    $2715 Avg Bid
    19 bids

    I have a Usb Floppy drive and want it to replicate a tone/song imputed to a program [login to view URL]

    $20 (Avg Bid)
    $20 Avg Bid
    1 bids

    I am looking for a person with in-depth knowledge and contacts with the electronic waste industry in India, Pakistan, China or elsewhere in Asia. The person must be able to facilitate contact with trustworthy and reliable suppliers and handlers of electronic waste. Her or she must provide a document with business- and contact information of serious

    $172 (Avg Bid)
    $172 Avg Bid
    10 bids

    Self Publisher/Writer needs a Business Manager from Miami area. Book - FOR YOU WOMAN: Spirit Jewels. Website: [login to view URL] Someone who can help Me establish and coordinate every related operational aspect in Book Marketing and Promotions: Phone, computer, apps, Website, social media sites, book related businesses and resources needed for maximum Writer's marketing exposure and operati...

    $28 / hr (Avg Bid)
    $28 / hr Avg Bid
    4 bids

    we are developing electronics which will have data and we need software to display the data from the data logger which will have sensors, IMU, accelarometer, gyros to be displayed

    $406 (Avg Bid)
    $406 Avg Bid
    11 bids

    i am working on project where I need electronic design engineer with latest electronic knowledge and write firmware for the same. Design of sensors, firmware, software to display the output which involves IMU, High Speed data logger with Memory.

    $406 (Avg Bid)
    $406 Avg Bid
    9 bids
    $580 Avg Bid
    26 bids

    I would like to make a electronic greetings card wishing my clients a happy new year that I can send via email. I would like to be able to customize each one to have the name of the recipient. I'm open to ideas, however I would like the company logo's, a picture of our product and if possible the card to open like some of the services available online

    $27 (Avg Bid)
    $27 Avg Bid
    19 bids

    A single landing page for electronic invoicing in Colombia. The focus is mainly on copywriting and visual design elements to maximize conversion. Many solutions for electronic invoicing exist in Colombia. Advantages to our product include: - Better cost structure: Pay once and get unlimited invoices - Focus on Integration: It will work with any system

    $30 (Avg Bid)
    Guaranteed
    $30
    1 entries

    Hello, i have tinkerboard ...have tinkerboard computer running ARMBIAN OS. i use rdesktop to access my win10 virtual machine on local hypervisor server in local network. i want to connect smartcard and usb device to ARMBIAN and want to use it in my win10 vm. thats your tasks! i will create milestone, but i will only pay if work is finished! thanks.

    $122 (Avg Bid)
    $122 Avg Bid
    7 bids

    Hi, We need somebody who is having the knowledge to develop Electronic E-commerce Website with Multi-Vendor Feature and some other customization. You Can you see the demo template which is we want to like that as the front end. [login to view URL]

    $418 (Avg Bid)
    $418 Avg Bid
    21 bids

    SENARIO: I have a quantity of 40 USB thumb drives. I want to divide them into four groups, A, B C, and D. When I plug ANY of the thumb drives in from group A into ANY of the USB ports on the Pi, I’d like it to play video: /Home/Pi/[login to view URL], when I plug ANY of the thumb drives in from group B, I’d like it to play video /Home/Pi/[login to view URL], when I plug...

    $20 (Avg Bid)
    $20 Avg Bid
    2 bids

    I have knowledge of electronics engineering

    $334 (Avg Bid)
    $334 Avg Bid
    5 bids

    ...for you PCB designers who are up tonight. There is a PCB design already done in Altium Designer that contains a USB-C connector in it. This was a TE Connectivity USB connector. All we need you to do is to swap this connector with a Molex USB-C connector, the Datasheet of which will be supplied. All it takes is running Altium and about half an hour to

    $24 (Avg Bid)
    $24 Avg Bid
    32 bids

    ADS Automotive Diagnostic Solutions Minimalistic logo - ADS letters to dominate the logo We are looking for a professional logo design Our company is a Car Electronics workshop As on the top, the name is ADS and the descriptions is Automotive Diagnostic Solutions all can be used on the logo the winner must submit all kind of files like psd, illustrator and so on..

    $50 (Avg Bid)
    Guaranteed
    $50
    147 entries

    I need can connect a ESL tag and RF antenna to simple Windows c# Application. The Application need include the following features: 1. Login Page 2. ESL list (after scan) 3. Allow Modify the ESL content 5. Scan button with the connected antenna 6. Delete button 7. Antenna manager 8. ESL by category 9. Organized source code (Business Logic) with comments Equipment: I use a Zigbee Modules (802.15....

    $558 (Avg Bid)
    $558 Avg Bid
    14 bids

    Developer or Electronic expert for build an app that will connect to a device trought bluetooth .

    $34 (Avg Bid)
    $34 Avg Bid
    11 bids

    1. Proofreading product listing, including the title, bullet points, and description, etc 2. Provide suggestions about our product's pages from the buyer's point of view: pictures, prices, titles, description, bullet points, etc. 3. Must be Spanish Native Speaker 4. Having experiences of shopping on [login to view URL] is preferred. 5. Having experiences of Product Description writing ...

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    15 bids

    My wife is currently using her phon...recording I would like to setup a Rpi3 with a USB webcam in her studio, that would allow her to record her routines by controlling the Start/Stop of USB Webcam via a Webpage. and/or by a button connected to the GPIO of the Pi. Ive found similar projects online that only work with the RPI Camera not USB Cameras.

    $244 (Avg Bid)
    $244 Avg Bid
    10 bids