Fft iphone jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    575 fft iphone jobs found, pricing in USD

    I need programmer to help me finish up an application for a STM32F4 Discovery. The application must read samples from the onboard MEMS microphone and run FFT. It will then report the frequency,magnitude values over USB. The existing code has USB running as custom HID and the actual microphone sample acquisition and transmission must be implemented

    $274 (Avg Bid)
    $274 Avg Bid
    12 bids

    FFT frec max 20 Khz. PSOC5

    $402 (Avg Bid)
    $402 Avg Bid
    4 bids

    Evolutionary Spectra Estimation of Field Measurement hagupit Typhoon Processes Using FFT Wavelets

    $129 (Avg Bid)
    $129 Avg Bid
    6 bids

    READ CAREFULLY BEFORE APPLYING. 26 page paper - Evolutionary Spectra Estimation of Field Measurement hagupit Typhoon Processes Using FFT Wavelets. (1) I will provide the typhoon Winddata you will do analysis through matlabs (2) You should probably make codes for this article and will handle to me with new article (3) i will give you some References

    $226 (Avg Bid)
    $226 Avg Bid
    9 bids

    Need engineering expert to help with a Research on wind enginee...to help with a Research on wind engineering strutura. analysis through matlabs Important*** Do you have experience in Field Measurement hagupit Typhoon Processes Using FFT Wavelets. Do you have experience in Matlabs, examples of work. Do you have experience in Academic Writing.

    $162 (Avg Bid)
    $162 Avg Bid
    6 bids

    ...project of 'Design and Simulation of a Fast Fourier Transform Processor using Verilog'. However, I am not quite sure with the Verilog language itself and how to do the coding for fft. And there's a little problem with the software where I'm not able to simulate even with the simplest design (I tried with full adder). I found a butterfly unit code in some

    $139 (Avg Bid)
    $139 Avg Bid
    14 bids

    ...scale, and also make a Fast Fourier Transform (FFT) to display the frequency domain and save a string with (Hour, DeviceNumber, ...dB level) in a .csv file, show these information and the value in decibel dB on a 7" HDMI touch screen (already connected), A second goal would be to provide this dB and FFT information to a webserver database which could

    $640 (Avg Bid)
    $640 Avg Bid
    13 bids

    ...microphone and transform to decibel (dB) and also make a Fast Fourier Transform (FFT) to display the frequency domain and save all this information in a .csv file. A second goal would be to show this spectrum analyzer and the value in dB on a 7" screen and provide this dB and FFT information to a webserver database which could be accessed online at any moment

    $917 (Avg Bid)
    $917 Avg Bid
    14 bids

    LabView and Matlab perform FFT and design sub vi. More details to be provided.

    $71 (Avg Bid)
    $71 Avg Bid
    4 bids

    ...the amount of data to run through it (given at least 25 open charts at any time for scanning will be the typical load). It may be possible to save some horsepower by using an FFT measurement at several predetermined measured points along said array without converting the array at each bar close by using a measured distance (logarithmic equivalent of the

    $222 (Avg Bid)
    $222 Avg Bid
    4 bids

    .csv data analysis on Matlab. Using FFT, Filtering and statistics

    $152 (Avg Bid)
    $152 Avg Bid
    6 bids

    Vibration data colecto...for data acquisition and make it available in archives. Some variables must be configurable, resolution or acquisition rate, frequency range. Convert the signal in time to FFT; Calculate the Hilbert transform (Signal Envelope); Calculate narrow bands of frequency. Show the calculated data as a table or list on the screen.

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    9 bids

    We are a team of condition monitoring engineers. We have connected equipments with Vibration sensors and have recorded data in V(mm/s). We want to convert this to FFT spectrum

    $135 (Avg Bid)
    $135 Avg Bid
    19 bids

    Matlab, Integration, Differentiation, Symbolic Math and FFT. More details to be provided.

    $37 (Avg Bid)
    $37 Avg Bid
    29 bids

    Must be an expert in " Discrete-time signals and systems, Sampling, Z-transform, Discrete-time Fourier transform and frequency responses, DFT, FFT, and introduction to IIR and FIR digital filter design"

    $27 (Avg Bid)
    $27 Avg Bid
    16 bids

    A (PSK) modulator/ demodulator for the ARTIX7-200 platform is need...designs. If the bidder is sucessfull, we will ask for; A pulse shaping Filter,(TX,RX) A Viterbi decoder(an existing one), Sync Word Insertion, Detection, Reduced Rate FFT, BER count, SNR estimation blocks to be added by the bidder to the existing project for an extra fee.

    $659 (Avg Bid)
    $659 Avg Bid
    18 bids

    Application is relted to acoustic analysis of a data for internal processing. Implication of FFT and signal processing.

    $33 (Avg Bid)
    $33 Avg Bid
    5 bids

    ...guys who have done work on FMCJESDADC1 card, ZC706, RAM Controller, Petalinux. 1. Take data from FMCJESDADC1 card using JESD204B (already implemented) 2. Perform analysis (FFT, etc) 3. Save Data in PL RAM 4. PS gets the data and send it to remote PC over TCP/IP. 5. PS has Petalinux installed 6. Use FPGA Drive (from Opsero) to save the data permanently

    $506 (Avg Bid)
    $506 Avg Bid
    4 bids

    ...application that would control RGB LED over wifi network based on the FFT sound processing. Application has two modes of operations - static and sound processing. In static mode need to control RGB lamp ( simple command based interface), in sound processing mode need to to FFT filtering and stream the results tot eh RGB lamp while maintaining command

    $1351 (Avg Bid)
    $1351 Avg Bid
    27 bids

    We have a micro-controller base...also receive data from sensor and visualize it in real time (30 fps) 4. UI must be able to do real time charting 5. UI must do some basic mathematics such as remove averages, FFT prior to plotting 6. Platform: WIndows, Java 8 + Netbeans 8.1 7. Must work from on-site (our office) for a large part of the assignment.

    $1921 (Avg Bid)
    $1921 Avg Bid
    9 bids

    Looking for an experienced Arduino programmer to write code for a Music-to-LED visualization project, preferably someone who has experience with signal processing using FFT, and/or experience programming LED arrays. Arduino will be listening to the audio signal from the connected microphone, processing it in real time and displaying some relevant animation

    $55 / hr (Avg Bid)
    $55 / hr Avg Bid
    23 bids

    Looking for an experienced Arduino programmer to write code for a Music-to-LED visualization project, preferably someone who has experience with signal processing using FFT, and/or experience programming LED arrays. Arduino will be listening to the audio signal from the connected microphone, processing it in real time and displaying some relevant

    $522 (Avg Bid)
    $522 Avg Bid
    21 bids

    ...guys who have done work on FMCJESDADC1 card, ZC706, RAM Controller, Petalinux. 1. Take data from FMCJESDADC1 card using JESD204B (already implemented) 2. Perform analysis (FFT, etc) 3. Save Data in PL RAM 4. PS gets the data and send it to remote PC over TCP/IP. 5. PS has Petalinux installed 6. Use FPGA Drive (from Opsero) to save the data permanently

    $527 (Avg Bid)
    $527 Avg Bid
    4 bids

    ...bidding, please show me the examples of work you have done on this in past. 1. Take data from FMCJESDADC1 card using JESD204B (already implemented) 2. Perform analysis (FFT, etc) 3. Save Data in PL RAM 4. PS gets the data and send it to remote PC over TCP/IP. 5. PS has Petalinux installed 6. Use FPGA Drive (from Opsero) to save the data permanently

    $1640 (Avg Bid)
    $1640 Avg Bid
    6 bids

    ...implementation of forward and inverse FFT (Fast Fourier Transform) for audio, written in RenderScript. Requirements: * It must behave the same way as the FFTW real-data DFT: [login to view URL] * The forward FFT must take real inputs and produce complex outputs * The inverse FFT must accept complex inputs and produce

    $1214 (Avg Bid)
    $1214 Avg Bid
    25 bids

    ...find a clean looking logo that incorporates a vector outline of the state of Florida and has a modern look to it. I'm open to use of an abbreviation for the company name, i.e. FFT&E. My website domain will be [login to view URL], I attached an outline of Florida to incorporate something like it into my logo, though not required as part of the design I am

    $50 (Avg Bid)
    Guaranteed Sealed
    $50 Avg Bid
    51 entries

    We have a current app that was done using the App Inventor software package. We require someone to add FFT funciton to this app in the short term (1 week time-frame) for an upcoming exhibition.

    $885 (Avg Bid)
    $885 Avg Bid
    41 bids

    so what i need a working optisystem simulation for the 802.11g . simulation parameters are : 16 QAM number subcarrier = 52 nuumber FFT=104 position array= 26 fiber length=20km bits codé par symbole=4 bits frequency= 2.412 GHz RF input power = -3.22 dBm bit rate-debit binaire =24 Mb/s debit par sous canal=0.5 Mb/s debit en M symbol/s=48

    $19 (Avg Bid)
    $19 Avg Bid
    1 bids

    write two different matlab codes for de-noising a high voltage system signals to detect partial discharge in FFT method and wavelet transform method and obtain the results and graphs. Show that wavelet transform method is better efficient FFT method. NOTE: noise removal for high voltage system signal

    $48 (Avg Bid)
    $48 Avg Bid
    12 bids

    FFT IP core implementation in my code to show the spectrum of 125MHz bandwidth on PC screen by using ILA, DDS, and chipscope

    $220 (Avg Bid)
    $220 Avg Bid
    1 bids

    quiero realizar la grafica fft de la corriente de el siguiente archivo, la primera columna representa el tiempo y la seguna la corriente

    $8 - $15 / hr
    $8 - $15 / hr
    0 bids

    hello i have a txt ile with 4 columns the isrt is the time the second is the current or phase a the 3 phase b and the 4 phase c i need to get the fft graph in mat lab

    $250 (Avg Bid)
    $250 Avg Bid
    9 bids

    hello can you helpme to do some graphs in matlab is a simple task, I need to do the grap o fft current of engine I have the inormation in a file but i cant get the grps i dont know what is wrong, do you check these ?

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    quiero realizar la grafica fft de la corriente de el siguiente archivo, la primera columna representa el tiempo y la seguna la corriente

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    1 bids

    hola porias ayuarme hacer unas graficas de matlb es realizar unas graficas de la fft de una señal de corriente

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    1 bids

    ADAPTIVE MODULATION AND CODING REQUIREMENTS: *Bandwidth =20 MHz; *Number of FFT NFFT=64; *Number of Data subcarrier Nd = 48; *Number of pilot Np =4; *Guard Interval = ¼ of symbol period Ts; *OFDM transmission: 52 (i.e Nd+Np) *Pilot data interval = 13 sub-carriers, starting from the 6th; *Indices of the pilot sub-carier = 6th, 19th, 32nd and

    $159 (Avg Bid)
    $159 Avg Bid
    11 bids

    It is a project on FFT Processor In Matlab. I will give the details later.

    $46 (Avg Bid)
    $46 Avg Bid
    19 bids

    A Freelancer with very strong math skill is needed to write a pair of signal processing routines. They must be optimized for speed and written in x86 assembler. The first routine is a Fast Fourier Transform. The second routine is a band pass filter. You would be required to produce the needed data for testing to verify correct operation. NASM (Netwide Assembler) would be the preferred develo...

    $205 (Avg Bid)
    NDA
    $205 Avg Bid
    9 bids

    ...----------------------------------- You are allowed to used inbuilt functions to compute fft There are packages available in numpy as well as in opencv Steps: 1. Compute the fft of the image 2. shift the fft to center the low frequencies 3. get the mask (write your code in functions provided above)

    $61 (Avg Bid)
    $61 Avg Bid
    9 bids

    Hi deadhunt, I noticed your profile and would like to offer you my project. We can discuss any details over chat. its about a MATLAB code which i have to... its about a MATLAB code which i have to covert in C language using Vivado SDK. the code is already converted just a part of it is remaining in which i have to perform some fft and ifft functions.

    $122 (Avg Bid)
    $122 Avg Bid
    1 bids

    ...time series (electrograms) and reference their 3d position regarding the 3d surface (with a mouse roving above the 3d surface should appear the signal at that point) - perform FFT or other frequency analysis tool to each of the above time series, and then make a plot of each of the dominant frequency, for each series and plot it in the 3d surface - perform

    $2664 (Avg Bid)
    $2664 Avg Bid
    19 bids

    Hi can you design an app that will display frequency response, FFT of the sound, freq analyzers and so on. There are a lot of apps out there that do these things however I would like to make a custom app. This will require some frequency analysis and analysis of the mic signal. Thanks.

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    1 bids

    A VB6 program that splits the currently pla...playing (stereo mix) audio signal into seven (7) frequency bands and outputs seven (7) corresponding integer values. 1. See attached pdf for details. 2. We can supply a sample FFT analyser program written in VB if it helps 3. PLEASE BID THE REQUIRED AMOUNT (Not a lower amount just to get our attention)

    $545 (Avg Bid)
    $545 Avg Bid
    8 bids

    Hi- This isn't a complicated job, but one I just don't have time for myself, so I need a bit of help in research and data mining for contacts. I'd like to hire someone who can compile a spreadsheet with website info and "contact" emails for any organization related to the following subjects who are located or are for the areas of "Arizona" "Southwest" ...

    $26 (Avg Bid)
    $26 Avg Bid
    17 bids

    I need an app code to be corrected. The app displays spectrogram but there is an error that it does not allow plotting bigger spectrograms. I need to increase FFT length in Res/values/ arrays-> <string-array name="fft_len" translatable="false"> <item>@string/fft_len_name</item> <item>512::512</item> <item>1024::1...

    $50 (Avg Bid)
    $50 Avg Bid
    15 bids

    Hello, I'm interested in splitting the wideband signal into short channels, but I'm getting into a pe...transition width, number of kernels, amount of data per core, and so on, since it should be universal. Since the channels are always with the same width, it is intended to use the FFT / DFT Polyphase and / or their variations, at your discretion.

    $166 (Avg Bid)
    $166 Avg Bid
    5 bids

    The work consists on reproducing this Matlab GUI in Java, I attach a Youtube l...Matlab GUI in Java, I attach a Youtube link where I explain the GUI. In summary the work is: 1. Visualizing the microphone signal 2. Record the microphone signal 3. Plot the fft of the microphone signal Youtube link: [login to view URL]

    $164 (Avg Bid)
    $164 Avg Bid
    6 bids

    1) Write a function to implement N-point DFT. The function should have the following form: function X=myDFT(x,N), where x is the digital signal in time-domain, N is the numb...N), where x is the digital signal in time-domain, N is the number of points for DFT, and X is the frequency spectrum. 2) Test your function by comparing with the result of fft.

    $81 (Avg Bid)
    $81 Avg Bid
    33 bids

    Hi Muhammad A., I noticed your profile and would like to offer you my project. We can discuss any details over [login to view URL] a function to implement N-point DFT. The func...X=myDFT(x,N), where x is the digital signal in time-domain, N is the number of points for DFT, and X is the frequency spectrum. Test your function by comparing with the result of fft.

    $100 (Avg Bid)
    $100 Avg Bid
    1 bids

    I am loo...installation of the Android Studio development environment. - Assist another developer in building an app for processing and displaying data from a sensor built into the MDK. FFT and averaging will be required. It may be possible to use existing code for spectral analysis of audio signals for this. - Other development support as required.

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    27 bids