Firmware cell phones jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    10,257 firmware cell phones jobs found, pricing in USD

    Description: We want to create a prototype for a router. ...freelancers to work on the project with us short term. - Developer needs to be very familiar with firmware development, especially with router. - Developer needs to understand and know about MESH technology. - Need consultancy and also develop the firmware of the prototype. - Pay negotiable.

    $2233 (Avg Bid)
    $2233 Avg Bid
    6 bids

    Excel Macro to create TOC and loop through each page and collect data from cell. please only offer if you are VBA expert. There are existing code online to generate a table of contents but I'm looking for extensive updates to the code. Job should only take 15 minutes for an VBA expert.

    $19 (Avg Bid)
    $19 Avg Bid
    9 bids

    setup an uninstalled NEC SV9100 PBX with two phones and access a single PSTN Australian Telstra Line System has NEC licences from prior owner. PBX HAS has GCD-CP10 GCD-4COTC GCD-8DLCS GCD-4LCF PHONE ARE DT400 and DT800

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    1 bids

    I need to develop firmware for testing the wireless communication. I have nRF52840 board and lora gps hat module for raspberry pi. Your task: - Need to connect nRF52840 board and hat module (SPI, UART) - nRF52840 should be received GPS postion and data from LoRa gateway. - nRF52840 should send the data to smart phone via Bluetooth Low Energy (BLE)

    $660 (Avg Bid)
    $660 Avg Bid
    7 bids
    Custom ESP32 Firmware 5 days left
    VERIFIED

    Develop firmware with UI for ESP32 PCBA with TFT, Resistive touch controller, and motor control. Skills: ESP32, esp-idf, HMI, embedded, TFT-LCD, UI, Inkscape, C/C++, IOT See attachment for full details

    $853 (Avg Bid)
    $853 Avg Bid
    27 bids

    I have a hardware products which works on dialogue da14585 I am looking for firmware developers who can change the icons on the smart band which currently has a firmware which is BLE updatable. if this happens future works will follow.

    $21 - $175
    $21 - $175
    0 bids

    Need design develop and firmware as per required protocol.

    $726 (Avg Bid)
    $726 Avg Bid
    11 bids

    ...motor CW or CCW depending on to movement of obstacle Left or right. Build & test prototype. Prototype Design (Testing 2 Nema 23 Stepper Motors for both Modes) PCB design 200 Firmware programming. 150 Soldering, chip 250 Parts (2 Nema 23 Motors, 2 Motor controllers, chips and micro cameras & 2 Remoter control) 250 Shipping 150 Total 1000 Deliverable 1

    $1417 (Avg Bid)
    $1417 Avg Bid
    18 bids

    I need some help with my business.

    $129 (Avg Bid)
    $129 Avg Bid
    3 bids
    Openvpn project 3 days left

    I want run an openwrt os in the vm. I want a detailed instruction how to run the firmware image on the Vmware or Oracle Virtual Box. Details will be shared via chat.

    $188 (Avg Bid)
    $188 Avg Bid
    6 bids
    hdmi switch 3 days left
    VERIFIED

    I need an hdmi switch with picture in picture. PCB, Schematics, BOM, Firmware.

    $202 (Avg Bid)
    $202 Avg Bid
    10 bids

    ...requesting command is received. This task implements and delivers two processes: 1 - Slave firmware does sensor initialization (zeroing airspeed) and data reading from Airspeed sensor MS4525DO (over I2C) when request received from the Master. 2 - Master firmware MCU sending to the Slave setup data, requesting and receiving Airspeed data and after the

    $403 (Avg Bid)
    $403 Avg Bid
    9 bids

    Please Provide List That Includes Following Criteria and amount : - Years in Business 1 - 12 / Since 2007 - Cellular Phone Number - Email - Revenue - Name, Business name List needs to contain 50k names and up csv or excel file only

    $153 (Avg Bid)
    $153 Avg Bid
    24 bids

    remotly work(team viewer ) .on our current app we would like to add youtube api to play them. project is on android studio 3 using inbuilt firmware player.

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    25 bids

    We have been developing large variety of “Personalization Apps”. “Launcher App” is a kind of app to be able to customize wallpaper and icons of Android smartphones. This time, we are looking for graphic designers who can make “Launcher themes”.

    $37 (Avg Bid)
    $37 Avg Bid
    26 bids

    We are looking for developers/coders specialized in cryptos and blockchain for a project of firmware development. We would like to get a firmware to overclock this mining hardware i.e. graphic cards (GPU) RX580 8Go. Which are the maximum hashrates performances you can get?

    $1929 (Avg Bid)
    $1929 Avg Bid
    4 bids

    Position: Embedded Firmware Testing Engineer (Contract for 6 months). Mandatory Skills: Strong C Programming skills. Good knowledge on firmware and device driver verification and Validation for DSP and Microcontroller platforms. Strong debugging skills with JTAG and boot-loader environments. Experience in bring up of peripherals like I2C, SPI, MMC

    $363 (Avg Bid)
    $363 Avg Bid
    8 bids

    We are looking fore someone who is proficientin embedded systems and can write firmware, bootloaders, e squared c code etc. We want to write a bootloader firmware to function on our proprietary PCB allowing us remote access to do updates etc.

    $2326 (Avg Bid)
    $2326 Avg Bid
    27 bids

    ...development for a small household appliance (in positive case, I must be able to pass CE quality certification): - optimal solution have to be checked together; - simple testing firmware included (eg: C, Lua,... I have already coded some working example); - files available for further use (eg: for KiCad); 2- prototype PCB produced in small testing series

    $511 (Avg Bid)
    $511 Avg Bid
    24 bids

    Develop fully commented C source code for nRF52840 Developerment kit. Using SDK 15.2 and Softdevice 6.1.0 with GCC compiler and eclipse project. Develop test harness to verify operation (prefer python using pc-ble-driver-py) Will require FTDI TTL cable for second uart

    $545 (Avg Bid)
    $545 Avg Bid
    9 bids

    ...clinical data scientist in need of an acquisition system for a lab project. I might make a few to share with collegue and thus would like all of the resultant PCB, schematic, and firmware files. Everyone has probably seen the many EKG devices on the market these days that allow you to view and capture a single lead of EKG. My project requires acquisition 12

    $3061 (Avg Bid)
    $3061 Avg Bid
    24 bids

    ...need an expert Xamarin dev for Native iOS and Android apps to interface with custom built hardware. I will supply the hardware but you will need to assemble it, load the firmware i send you and then write the mobile apps to interface. Some experience with Arduino is preferred but not necessary. I have done a few projects with a different developer

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    13 bids

    I am searching for an experienced embedded firmware engineer / software developer with experience in ARM mbed OS who is helping me with writing the firmware for a project incl. the following components: 1) MCU Nordic nrf52 (Fanstel BT832 or BT840) 2) Gyro incl. DMP (Invensense mpu9250/ICM20689 ) 3) Sound decoder (VLSI vs1053b) 4) Serial (SPI) NAND

    $1706 - $3412
    Sealed NDA
    $1706 - $3412
    35 bids

    A new design to an existing cell phone holder or cradle

    $101 (Avg Bid)
    $101 Avg Bid
    28 bids

    Design on T-shirts, mobile phones and other clothes, and choose the drawing of your choice.

    $25 (Avg Bid)
    $25 Avg Bid
    33 bids

    i need matlab code for 1) particle swarm optimization for cell planning 2)grey wolf optimizer for cell planning

    $21 (Avg Bid)
    $21 Avg Bid
    1 bids

    I am trying to make a property inspection report that has 125 lines of questions and answers that have a pull down list. I have this done but I can not figu...report that has 125 lines of questions and answers that have a pull down list. I have this done but I can not figure out how to take a picture and have it place in a designated cell with notes.

    $279 (Avg Bid)
    $279 Avg Bid
    10 bids

    Need Asterisk expert, Phones are down with new router trying to debug where the problem is

    $141 (Avg Bid)
    $141 Avg Bid
    20 bids

    I need someone capable of reverse engineering and hardware i have a software that works for a specific tool and want someone to make the hardware for me or edit firmware of existing hardware contact me for further informations

    $469 (Avg Bid)
    $469 Avg Bid
    6 bids

    Universal Talk Time Limited is a Zambian company operating in the telecommunication space. The company would like to design and launch a mobile phone for sell in Africa and would like to design packaging box. Example of product and pone is attached

    $33 (Avg Bid)
    $33 Avg Bid
    54 bids

    I need you to develop firmware for me. I would like this firmware to be developed for Windows using C or C++.

    $117 (Avg Bid)
    $117 Avg Bid
    9 bids

    I have an IP camera with Linux inside (BusyBox). I have no access to web interface, it is password protected and I do not know the password. So, I neet that password and root access to the shell of the installed Linux itself. I have taken a full dump from the camera`s EEPROM. But I am not a specialist in embedded systems, so I do not know how to access files. AFAIK if I access files, I will have ...

    $31 (Avg Bid)
    $31 Avg Bid
    4 bids

    I want to customise firmware for Chinese mag250. Original firmware of mag250 has clone kill code so I need someone to help me with that issues.

    $28 / hr (Avg Bid)
    $28 / hr Avg Bid
    3 bids

    I have an access point (DRAYTEK) which I am attempting to connect to my network. i need someone to login and c...which I am attempting to connect to my network. i need someone to login and configure it here is the manual [login to view URL]

    $31 (Avg Bid)
    $31 Avg Bid
    28 bids

    ...experienced embedded engineer or team of engineers to develop an OBD II device from concept to pilot production. The tasks will include the schematic design, PCB layout, BOM, firmware development, production testing software, App, Web design, functional prototype. This is a sample of what I'm looking for: [login to view URL]

    $3206 (Avg Bid)
    $3206 Avg Bid
    20 bids

    Hi everyone, I've created an Android application which is linked to my website us..."device_name":"Suzuki Swift | Y 98-4","email":null,"mobile_phone":null,"command":null,"overspeed_speed":"20","overspeed_distance":1} I need this application available for Android phones and IOS phones. I will be lo...

    $538 (Avg Bid)
    $538 Avg Bid
    56 bids

    Looking for a LBS provider, who can provide us the LAC code and the cell id of a MSISDN using a HTTP API. (You have to do perform a SS7 MAP Anytime interrogation query to get the LAC and cell ID from the VLR.) We would pay a setup fee and a fee per query. Please do not bid if you are not able to provide LBS services(HLR/VLR/MSC lookup) Please provide

    $8795 (Avg Bid)
    $8795 Avg Bid
    7 bids

    I have a bunch of phones that I need to have auto firmware update when they are factory reset. I have a DHCP 160 option pointing to HTTPS server for provisioning. Firmware is also on that HTTPS server but my phones connect to my SIP server correctly and ignore the firmware update task. I need help getting my phones to force firmware upgrade when the...

    $10 - $30
    $10 - $30
    0 bids

    ...labeled either above or below the button. When on the button would say on and be green. When off the button would display off and be red. This phase focuses more on software/firmware that I would assume lives on the raspberry pi. The controller receives inputs from the touch screen and outputs signals to turn on and off power to the pumps. If it makes

    $2263 (Avg Bid)
    $2263 Avg Bid
    9 bids
    $315 Avg Bid
    13 bids

    I Need project: RFID EM 125Khz IC reader ( common chinese rfid device) + HID 134Khz reader selectable Design Hardware frontend and Software in C using LPC111...selectable Design Hardware frontend and Software in C using LPC1114 microcontroller No use module, need analog frontend ( amp op and LPC1114 and some discrete devices only) Firmware write in C

    $453 (Avg Bid)
    $453 Avg Bid
    7 bids

    I'd like to develop PCB board using altium designer. I have the block diagram for device I am gonna develop. Candidate MUST have professional skills and ex...board using altium designer. I have the block diagram for device I am gonna develop. Candidate MUST have professional skills and experience in circuit design, PCB design and firmware programming.

    $10 - $30
    Sealed
    $10 - $30
    4 bids

    I need someone to help me better understand how my installation of these version control tools actually works, and I need to be able to see changes daily from my phone. This person needs to have a strong command of the English language and good voice communication. You will not have access, this needs to be instructed via communication only

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    5 bids
    phones Ended

    I need an Android app. I would like it designed and built.

    $47 (Avg Bid)
    $47 Avg Bid
    10 bids

    I'm looking for smart watch firmware developer who knows Xiaomi Mi Bunny Watch 2.

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    6 bids

    We are looking for an experienced C developer with good english skills for maintaining and improving on a hardware wallet firmware. Applicants will have the chance to work on a challenging long term project.

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    42 bids

    ...coding programs and recharging the battery 7. 2-3 sample buttons on the device 8. Test LEDs before each port and buttons 9. Basic firmware and boot-loader programs are to be included 10. Some open sourced SDK for developing firmware and embedded applications Deliverables: 1. Schematics 2. PCB Layout 3. Gerber Files 4. Bill of Materials 5. Assembled PCB

    $483 (Avg Bid)
    $483 Avg Bid
    13 bids

    I am looking for a talented ESP32 firmware developer who can do the task of switching WiFi and BLE in ESP32.

    $194 (Avg Bid)
    $194 Avg Bid
    13 bids

    I need help making and compiling a simple Makefile that will be used for uploading a firmware for a Teensy Board (Similar to Arduino).

    $32 (Avg Bid)
    $32 Avg Bid
    7 bids