Geometry jobs

...splitters, etc.). Specifically: 1) Understanding of photonics physics and light propagation. 2) Past experience with photonics simulations. Forward problem: Given the geometry of a waveguide, phase delay, input/output coupler, or splitter, find the propagation of light (modes), and be able to debug/understand errors based on experience and deep knowledge of photonics physics. 3) Past experience with photonics design/optimization. Inverse problem: Given a desired behavior (e.g. input coupler that accepts coherent light from 80 to 100 degrees, achieve at least 80% coupling efficiency to single-mode waveguide), select the coupler geometry (number of grating lines, their depth, pitch, and curvature, etc.) to maximize performance. 4) Past projects in photonics simulation and...

I'm looking for a skilled game developer to create a photorealistic version of Geometry Dash for PC and Mobile platforms. The revamped game should be pre-installed and ready to play by July 8, 2025. Key Requirements: - No lag or crashes - Smoother controls - New levels - Enhanced physics - Free chests every hour Ideal Skills: - Expertise in game development for PC and mobile - Strong background in photorealistic graphics - Experience in improving game mechanics and physics - Ability to meet tight deadlines

...Seismic Zone: South Lebanon (Hasbaya) - Ground Type: Class C (medium-stiff soil) - ag = 1.2 m/s² (subject to verification) - Behavior Factor q: 3–4 (depends on system type) - Importance Factor γI: 1.2 (school category) - Analysis Method: Modal Response Spectrum Analysis with CQC combination method. - Use accidental eccentricity = ±5% for both directions. Modeling Requirements 1. Geometry: - Model all floors, slabs, beams, columns, and walls accurately. - Include expansion joints between blocks. - Consider slab diaphragms (semi-rigid or rigid as per slab type: RC or post-tensioned). 2. Load Assumptions: - Dead Load: 20 kN/m² - Live Load: 4 kN/m² - Snow Load: -1.5 kPa on roofs - Wall loads as per thickness ...

Please Sign Up or Login to see details.

...and different volume filling styles. A set of different unit cells should be included in the procedure in grasshopper to enable a quick choice between the different available options. The procedure must be able to quickly define multiple combinations of lattice structure, varying the listed parameters and by varying the number of cells arrayed along each direction of the space. Starting with a geometry that defines the volume to be filled, the procedure must generate the internal lattice structure according to the defined parameters and provide a geometric model that can be processed (using stp files) to import it into Abaqus and perform the required static or dynamic analyses. The procedure will be applied to the generation of a leading-edge infill structure by varying all ...

...storytelling focus Menu and footer structure is already pre-documented (just needs to be integrated) UI must reflect a vintage, spiritual, ancient manuscript meets modern comfort vibe Mobile-first, fully responsive design essential Design Expectations: Expert with Figma / Adobe XD / Sketch Proven experience in building spiritual, vintage, or culturally rich platforms Understands color psychology, sacred geometry, spiritual iconography Familiar with UX writing and micro-interaction placement Clean, grid-based UI with flow designed for elderly to modern age users What You'll Get From Us: Ready content (90% structured) — less time on ideation, more on creation Clear documentation for menu/footer and all categories Rapid feedback cycles and clarity on design vision Long...

...commission a talented 3D artist for a sculpting and modeling project. The goal is to create a high-resolution diorama featuring two original split-fiction characters: the Blue Gorilla and the Yellow Fairy. The model should be rich in detail, with expressive features and dynamic poses that bring both characters to life. It’s important that the final sculpt is optimized for 3D printing, with clean geometry and a professional finish. This project requires experience in character sculpting, preferably with a strong portfolio in stylized or fantasy art. Looking forward to working with someone who can turn this creative vision into a printable reality....

...the simulation is to: • Visualize stress distribution and mechanical behavior of the coated surface under functional loads (e.g., mastication). • Evaluate the influence of coating thickness, material morphology, and layering order. • Assess stability of dual coatings (nHA + MgO) on curved implant geometry (helix). I will provide: • Coating process details and material properties. • Experimental characterization results (nanoindentation, SEM, FTIR, XRF, contact angle, profilometer). • Geometry guidance (implants split into 3 parts – middle part for mechanical test). Preferred Tool: COMSOL (Mechanical Module + Coating Layers), but ANSYS is acceptable too. Please respond with: • A short plan for how you’d approach the s...

Please Sign Up or Login to see details.

...Responsibilities: 2D to 3D Translation: Accurately translate complex 2D tattoo designs into detailed 3D models. High-Detail Sculpting: Ability to capture subtle artistic nuances, textures, and depth present in the original tattoo artwork. 3D Model Optimization for Printing: Crucially, prepare and optimize the 3D models for seamless 3D printing. This includes: Ensuring manifold meshes and watertight geometry. Considering wall thickness, support structures, and overall printability. Exporting models in appropriate formats (e.g., STL, OBJ, 3MF) suitable for large-scale production. Realistic Rendering (Optional but preferred): Provide high-quality photorealistic renders of the finished 3D designs to visualize the final sculpture before physical production. Required Skills &am...

I need a skilled SolidWorks designer to finish my 2D and 3D product design. The draft file is 70-80% complete. Requirements: 2D Working Drawings: - Add dimensions and annotations - Include assembly and detail views 3D Model: - Apply textures and materials - Create assembly animation - Make final adjustments to geometry Ideal Skills and Experience: - Proficiency in SolidWorks - Experience in 2D/3D product design - Strong attention to detail - Ability to meet deadlines

...worksheets for K-12 students (Word and PDF formats). - Include answer keys, visuals, and illustrations to make the content engaging. - Ensure branding aligns with RMNEduSTUDIO guidelines (borders, page numbers, branding placement). 2. Toolkit Development: - Guidance Kit: How to learn, solve, and improve in math. - Formula Kit: Grade-specific formula charts. - Tools Used: Geometry and math tools guide. - Shortcuts & Tricks: Speed-solving techniques. - “Math is Simple” Concept Booklet: Fun tricks & visual hacks. 3. Brand Building: - Design a cohesive brand identity for RMNEduSTUDIO (logo, color scheme, typography). - Create marketing materials such as banners, social media posts, and promotional content using Canva or s...

i'm seeking to anyone has a license of Thirdwave’s AdvantEdge software to simulate the cutting force analysis of a turning process. The simulation should focus on: - Cutting forces analysis - Temp. i have all parameters you need such as: - Cutting speed and feed rate and depth of cut - Tool geometry - Material properties also i will support you in first case of simulation to make sure all input is clear for you. The simulation will be based on a carbide turning cutting tool. Ideal skills and experience: - Proficiency in AdvantEdge software - Background in machining and cutting force dynamics if you have only license in thirdwave advantedge is enough

Project Description: Hello, I’m looking for an experienced Rhino/Grasshopper/Honeybee/EnergyPlus user who can guide me step-by-step via Zoom to run an energy simulation for a simple classroom model. Goal: Create a basic classroom geometry in Rhino. Use Grasshopper + Honeybee to set up the energy model. Run the simulation in EnergyPlus. Compare energy consumption for two scenarios: Base case: fluorescent lighting & HVAC operating on a fixed schedule. Improved case: same equipment, but controlled by occupancy sensors to switch lighting and HVAC based on actual occupancy. What I need from you: Help me build/clean the Rhino model. Guide me through the Honeybee workflow in Grasshopper. Show me how to set up simple loads, schedules, and HVAC systems in EnergyPlus. Help m...

...layout. • Create templates in specified dimensions (Instagram/Facebook: 1080x1350, LinkedIn: 1080x1080). • Ensure all text, icons, and buttons are clearly legible and well-balanced within the layout. • Use a consistent placeholder in place of the brand logo to maintain brand alignment across all template designs. • Incorporate a common visual element (such as a coloured frame, icon, or motif or geometry shapes suitable) across all templates to establish a unified brand identity. • Deliver templates that are easy for non-designers to edit and customize. • Collaborate closely with our marketing and content teams to capture the intended message and brand voice. Design Guidelines to Follow: Fonts: • Heading: Riffic Free (40pt) - Bold, clear, impactf...

...formats, with answer keys included. 2. Bonus Worksheet Bundles - Challenger Problems - Visual Practice Sheets - Daily 5-Minute Drill Sheets - Real-Life Math Scenarios 3. Final Toolkit Components - Guidance Kit: How to learn, solve, and improve in math - How to Solve This: Step-by-step solving strategies - Formula Kit: Grade-specific formula charts - Tools Used: Geometry and math tools guide - Shortcuts & Tricks: Speed-solving techniques - “Math is Simple” Concept Booklet: Fun tricks & visual hacks - Grade Completion Certificate: Editable certificate for students Additional Requirements: - A Canva expert is required to design visually appealing worksheets and toolkits that align with RMNEduSTUDIO branding guidelin...

...formats, with answer keys included. 2. Bonus Worksheet Bundles - Challenger Problems - Visual Practice Sheets - Daily 5-Minute Drill Sheets - Real-Life Math Scenarios 3. Final Toolkit Components - Guidance Kit: How to learn, solve, and improve in math - How to Solve This: Step-by-step solving strategies - Formula Kit: Grade-specific formula charts - Tools Used: Geometry and math tools guide - Shortcuts & Tricks: Speed-solving techniques - “Math is Simple” Concept Booklet: Fun tricks & visual hacks - Grade Completion Certificate: Editable certificate for students Additional Requirements: - A Canva expert is required to design visually appealing worksheets and toolkits that align with RMNEduSTUDIO branding guidelin...

Logo Design Contest – Modern, Memorable Bra...(without making it overly playful or gimmicky) -Smart use of negative space or unique type treatments We do not want: -Generic corporate logos -Overused stock icons (e.g. magnifying glasses, clipboards, etc.) -Cartoonish styles Inspiration / Design Direction: Think modern hiring platforms, forward-thinking tech brands, and intuitive design. We love logos with: -Clean sans-serif fonts -Balanced geometry or spacing -Optional subtle symbolism (like arrows, people, connections) We’ll give fast feedback and are excited to collaborate throughout the contest. The winner will likely be invited to help us with future design work (brand guide, UI elements, etc.). Looking forward to seeing your creativity — let’s build s...

Please Sign Up or Login to see details.

...and align existing models with scan data -Adjust dimensions based on scan and measurement references -Add or remove minor features where necessary -Correct geometry errors, ensuring clean, manufacturable models Important Notes: -Sand-cast surfaces may be simplified, but machined surfaces must be accurately modeled for dimensional correctness. -Must be available for virtual meetings (Google Meet, camera optional) to clarify details, discuss tasks, and share information efficiently. Requirements: -Proficiency in SolidWorks (2020 or compatible) -Strong experience working with STL and SLDPRT file formats -High attention to detail for geometry correction and precision modeling -Strong skills in reverse engineering, surfacing, and solid modeling workflows Preferred (Nice to H...

...dimensions (millimeter scale) 30-round capacity AR-15 magazine profile (STANAG 4179 or equivalent) Internal geometry must accommodate .223 Rem / 5.56 NATO rounds (COAL ~57.4 mm) Components (separate STL files required for each): Magazine shell (single or two halves depending on design) Follower Zig-zag style compression spring (accurate geometry, not placeholder coil) Removable base plate Magazine catch notch or locking tab (if applicable) Technical Specifications: All files must be delivered in STL format Optional: STEP, IGES, or native SolidWorks/Fusion360 formats Design should account for realistic tolerances for 3D printing or CNC prototyping Clean, printable geometry with closed manifolds No merged or booleaned parts — clean separations only ...

...formats, with answer keys included. 2. Bonus Worksheet Bundles - Challenger Problems - Visual Practice Sheets - Daily 5-Minute Drill Sheets - Real-Life Math Scenarios 3. Final Toolkit Components - Guidance Kit: How to learn, solve, and improve in math - How to Solve This: Step-by-step solving strategies - Formula Kit: Grade-specific formula charts - Tools Used: Geometry and math tools guide - Shortcuts & Tricks: Speed-solving techniques - “Math is Simple” Concept Booklet: Fun tricks & visual hacks - Grade Completion Certificate: Editable certificate for students Key Deliverables: - Syllabus-wise worksheets for each grade (K-12), covering all topics as per provided syllabus plans. - Bonus worksheet bundles for a...

...formats, with answer keys included. 2. Bonus Worksheet Bundles - Challenger Problems - Visual Practice Sheets - Daily 5-Minute Drill Sheets - Real-Life Math Scenarios 3. Final Toolkit Components - Guidance Kit: How to learn, solve, and improve in math - How to Solve This: Step-by-step solving strategies - Formula Kit: Grade-specific formula charts - Tools Used: Geometry and math tools guide - Shortcuts & Tricks: Speed-solving techniques - “Math is Simple” Concept Booklet: Fun tricks & visual hacks - Grade Completion Certificate: Editable certificate for students Key Deliverables: - Syllabus-wise worksheets for each grade (K-12), covering all topics as per provided syllabus plans. - Bonus worksheet bundles for a...

...include all visible elements in the orthophoto. Elements to be Drawn: Existing sidewalks Asphalt roads Light poles Drainage and sewer manholes Paved (paver block) areas Trees and green areas City blocks and property lot boundaries Any other relevant visible urban features Requirements: Layered DWG file with organized layers by element type Use of blocks for poles, trees, manholes, etc. Accurate geometry based on the provided orthophoto Prior experience in similar mapping or civil engineering projects...

We have a working Physics-Informed Neural Network (PINN) setup using NVIDIA's [PhysicsNemo]() framework. The simulation runs correctly, but the **output violates physical laws** — velocity in a narrowing throat region decreases, which contradicts continuity. --- ### What we have: - 3D STL geometry and mesh - Physics-informed training code using `physicsnemo` - Loss setup already includes Navier-Stokes terms - Trained model outputs, but unphysical flow field - Directory includes: ``, ``, ``, `conf/`, STL, outputs - Archive file (275MB): [DOWNLOAD LINK HERE - INSERT YOUR LINK] --- ### Your Task: 1. Inspect the code (esp. loss and boundary conditions) 2. Fix the setup so that

...for the steel and glass canopy located at the central bus stop island of Bernau train station, as part of a public infrastructure project. The scope includes the technical development of all drawings required for approval, fabrication, and installation, based on conceptual inputs and provided design constraints. The following deliverables are required: 1. General Drawing (2D + 3D) • Overall geometry and dimensions of the structure • Clearly labeled views (top view, elevation, cross-section) • 3D rendering for internal and external coordination 2. Foundation Connection Details • Accurate positioning of base plates and anchor bolts • Tolerances for drilling and leveling • Adjustability/interface with existing reinforced concrete foundations ...

Project Overview We propose to recreate the existing SketchUp design of your static measurement machine’s structural frame in SolidWorks, transforming it into a fully detailed, manufacture-ready model. Leveraging the preliminary SketchUp geometry and your complete parts list, we will build each component directly in SolidWorks, assign the correct material properties and thicknesses, and assemble the full frame. Once modeled, we'll generate flat patterns and export DXF/DWG cut files so that the sheet-metal components and profiles can be laser- or water-jet cut without delay. Workflow and Deliverables First, we’ll review your SketchUp files and the bill of materials to confirm dimensions, tolerances and preferred cutting processes. We’ll then reconstruct every ...

I'm looking for comprehensive 11+ maths content in PDF format. The content should cover arithmetic, geometry, and algebra at a medium difficulty level. Requirements: - Medium difficulty problems - Topics: Arithmetic, Geometry, Algebra - Delivered in PDF format Ideal skills and experience: - Strong mathematics background - Experience in creating educational content - Familiarity with 11+ exam requirements

...opposing semicircles connected at the center. * During its appearance, a 30° angled line cuts into the top or bottom segment, trimming the letter slightly to match the design system. 3. Final Structural Cuts Once all letters are built, thin white lines animate across the letters a, b, a, and c. * These lines appear last and are used to "slice" or "divide" those specific letters, aligning with the geometry of the grid. * They follow the exact angles and alignment shown in the construction reference. * This final step reinforces the idea that the logo is engineered or precisely crafted. After the slicing lines animate across the letters, the animation ends with the logo fully visible.
The construction lines (grid and guides) fade out, leaving the finished l...

I'm seeking an experienced web developer to create a browser-based interactive math learning app for high school students. The app should be accessible on any device without installation, aimed at underserved or low-connectivity students. Key Requirements: - Topics: Algebra, Geometry, Calculus - Quiz Structure: Multiple-choice questions - Clean, user-friendly UX - Simple math quiz and practice engine - Simulated user metrics for impact reporting Ideal Skills & Experience: - Strong web development expertise - Experience in building educational tools - UX/UI design proficiency - Familiarity with data tracking and reporting No mobile app development is required.

Description: I need a structural rib grid designed based on a shaped surface provided as a STEP file. The output will be used for laser-cut steel parts and must include specific assembly and clearance requirements. Scope of Work: Offse...within this exclusion zone Slot Entry Relief: Each slot must include a lead-in relief to ease assembly See attached sketch for example (triangular or rounded entry notch) Deliverables: Full 3D model in STEP or IGES format DXF files for all laser-cut parts Attachments: Picture showing slot lead-in relief geometry In your proposal, please include: CAD software you will use (e.g., Fusion 360, SolidWorks, Rhino, etc.) Estimated turnaround time The STEP file contains proprietary geometry and will be shared privately after initial screening ...

...layout. • Create templates in specified dimensions (Instagram/Facebook: 1080x1350, LinkedIn: 1080x1080). • Ensure all text, icons, and buttons are clearly legible and well-balanced within the layout. • Use a consistent placeholder in place of the brand logo to maintain brand alignment across all template designs. • Incorporate a common visual element (such as a coloured frame, icon, or motif or geometry shapes suitable) across all templates to establish a unified brand identity. • Deliver templates that are easy for non-designers to edit and customize. • Collaborate closely with our marketing and content teams to capture the intended message and brand voice. Design Guidelines to Follow: Fonts: • Heading: Riffic Free (40pt) - Bold, clear, impactf...

Scope of Work – Site Layout Regularization and Circulation Improvement (2D CAD) This scope includes revising the layout plan “” in AutoCAD, with a focus on improving plot geometry, land distribution, and circulation, aligned with planning standards and client goals. 1. Road Network and Access – Retain all 9.0 m wide roads. – Add turning radii at key intersections for smooth vehicle flow. 2. Plot Standardization – Use 9.14 × 12.19 m as the standard plot size. – Regularize odd-shaped plots to improve buildability. 3. Land Use Allocation – Allocate 10% (~596 sqm) for park, accessible to the public. – Allocate 5% (~299 sqm) for Civic Amenities in appropriate locations. 4. Residential Coverage – Maintain 52%–55%...

I'm looking for a skilled 3D modeler to modify an existing 3d design Widebody kit to fit a car model. The kit is already made, so you won't need to create any new parts, just adjust the Widebody model to fit the wheels and onto the car. . Requirements: - Adjust the car model to fit the widebody kit - Experience with 3D modeling software - Attention to detail - Knowledge of car geometry and widebody kits Ideal Skills: - 3D modeling (especially automotive) - CAD software proficiency - Previous experience with similar projects Please provide examples of your work and relevant experience.

...specific cutting format. Machine & Workflow Machine: FROG3D FrogWire cutter Axis type: X, Y, U, V (not W) Control: Custom G-code input (not proprietary software) Material: Type 2 EPS foam, typically 8' x 4' x 8" blocks All cuts must be clean arcs (no slashes through plug), corner-zero placement, and include a short or 2” lead-in Final cut must match a plug shape, not just an open ring Cut Geometry Tapered round hole cores Must match the curved wall radius of manhole forms Example diameters: Inner 1310 mm, Outer 1460 mm (wall thickness = 150 mm) Taper must follow a mold-radius profile, not a straight line Deliverables Aspire (.crv3d) file with toolpaths ready to export Clean, optimized G-code for hotwire cutting All toolpaths starting from co...

...to take a pre-operative 3D CT scan and generate accurate DRRs that align with intra-operative 2D C-arm fluoroscopic images—specifically for vertebrae. This registration will support anatomical navigation and overlay systems during interventional procedures. You will work with CT (NIfTI or DICOM), vertebra segmentation masks, and real fluoroscopy images to perform rigid alignment based on C-arm geometry and anatomical landmarks. First Deliverable: 1) Accurate DRR images generated from 3D CT, simulated from known C-arm parameters (SID, RAO/LAO, CRA/CAU). 2) Rigid registration of DRR to match the real 2D fluoroscopy image for vertebrae (T1–T12). 3) Validation via overlay masks and landmark accuracy. Budget: 300 USD for first deliverable NOTE: Only apply if you have e...

...Small library or study near the stair landing • Balcony on the front façade • Stair access to a roof terrace Setbacks Aim for roughly 10 ft at the front and rear, unless you demonstrate a better code-compliant solution. 3. What You May Adjust All rooms except the 20 × 20 master bedroom can move or change by about one to two feet to resolve structural grids, wall thickness, plumbing stacks, stair geometry or circulation. 4. Contest Deliverables • Two JPEG or PDF concept plans (ground and upper levels) with clear internal dimensions • Basic site plan showing front and back yards • One street elevation or 3-D massing image to illustrate façade intent • Short design statement (200 words max) explaining your layout logic and any dim...

...references: - Julian Hibbard – "Schematics: A Love Story" (for minimalist visual metaphors) - "Geometrical Psychology" by B.W. Betts / Louisa S. Cook (for abstract symbolic geometry — closest match) About the project: - If the theory gains traction at the conference, it may develop into a book project, in which case the illustrations could be repurposed or expanded. - I’m seeking a longer-term collaboration with a designer who enjoys conceptual and symbolic work. - The aesthetic should lean scientific rather than decorative — diagrammatic, clean, structured. Please include: - Portfolio examples (especially any relevant to geometry, metaphysics, or scientific illustration) - Your availability and rate - Any initial impressions a...

...skilled specialist in Pathfinder evacuation simulation (Thunderhead Engineering) to assist with preparing and configuring a multi-story building model originally developed in Revit. The model has already been transferred to Pathfinder, but it requires technical refinement to be suitable for earthquake evacuation analysis. Scope of Work: Model Cleanup & Preparation: Remove unnecessary imported geometry from Revit (e.g., furniture, non-walkable elements). Replace non-functional Revit-imported doors with native Pathfinder doors. Ensure proper placement and function of staircases, doorways, and exit paths. Evacuation Setup: Define movement surfaces and ensure navigation mesh continuity. Create occupant profiles (e.g., adults, elderly) with adjustable parameters (speed, sh...

Name: Biker Connect SIMPLE AND ICONIC I'm looking for a talented designer to create a simple, modern, and meaningful logo for our bike community. The logo should p...with direction: In the biker community, a common greeting is a raised hand gesture — sometimes a simple wave, two fingers, or a subtle nod from the handlebars. It’s a unique way riders acknowledge each other from a distance. It might be interesting to explore this concept in the logo — something abstract, clean, and modern that captures that silent connection between riders.
Thin lines, simple geometry, or minimal gesture silhouettes could work well in that direction. Of course, feel free to experiment — just thought I’d share this in case it sparks any ideas! Looking forward to ...

...translucent filaments, and how geometry affects shadow and glow Possesses both creative/artistic sensibility and solid 3D modeling ability Has a strong eye for shape, balance, and how light behaves inside a lamp Is genuinely interested in the aesthetic aspect of lamp design — not just engineering Project Overview: You will be designing a collection of 28 unique 3D-printable lampshades, all inspired by different themes — architecture, mythology, nature, geometry, sacred symbols, sci-fi, space, and more. Each lamp must: Be printable on a standard FDM 3D printer (200x200x200 mm build volume) Require no or minimal supports Be printable in PLA or PETG using translucent filament for soft light diffusion Be modeled as single- or dual-wall structures, with con...

...clothing and accessories are separate objects, do not remove them — instead, join all clothing and accessory meshes into a single object. - If there are accessories attached to the hair (like hats, clips, etc.), join them into a single object with the hair. - If the hair is not separated from the head, you’ll need to separate it properly. - If hiding or removing clothes creates holes or missing geometry, use your 3D modeling skills to fix and rebuild those areas while maintaining realistic body proportions. - If the rigging is missing, you will have to add it so the model is fully functional and ready to use. - Make sure the texture uses a Principled BSDF shader linked to an Image Texture node. - When you finish, add a modesty layer to cover the private areas. I...

...length, shoulder width — I will provide historic photos for reference) Ensure the armour pieces fit properly to the adjusted figure, especially the removable version Recreate all major visual elements of the real armour: Bullet holes Screw joins Key dents Distinct surface structures (but not fine scratches) Use the provided 3D link as your primary reference source (crucial) Maintain watertight geometry for 3D printing Deliver STL files suitable for high-resolution printing Requirements: Expert in 3D modeling and editing STL files Experience with historical accuracy and realism Ability to match specific details to photographic and 3D reference High level of communication and accountability Must start immediately and respond promptly You will be provided with very good refer...

...clothing and accessories are separate objects, do not remove them — instead, join all clothing and accessory meshes into a single object. - If there are accessories attached to the hair (like hats, clips, etc.), join them into a single object with the hair. - If the hair is not separated from the head, you’ll need to separate it properly. - If hiding or removing clothes creates holes or missing geometry, use your 3D modeling skills to fix and rebuild those areas while maintaining realistic body proportions. - If the rigging is missing, you will have to add it so the model is fully functional and ready to use. - Make sure the texture uses a Principled BSDF shader linked to an Image Texture node. - When you finish, add a modesty layer to cover the private areas. I...

Project: Scalar Flow Memory Theory – Expert Review & Collaboration Invitation Budget: £40 Fixed I’m seeking a theoretical physicist (ideally with background in GUTs, quantum gravity, or field theory) to review my completed paper on Scalar Flow Memory Theory. The model presents a testable framework unifying gravity and field memory geometry, with implications across cosmology, entropy, and particle structure. All materials are provided: Main theory paper. Supplemental derivations. Simulation data (.npy, .pdf, .zip). Code and figure output. The £40 payment is to fairly compensate your time for engaging with this theory at first glance. However, I’m hoping that if the model’s originality, consistency, and predictive potential are clear &mda...

Logo design Logo Type: Clean, powerful wordmark only. ⸻ Brand Name: Dustnin ⸻ Core Idea: Dustnin stands for reliability, discipline, and no excuses. It’s not flashy. It’s focused. We don’t “clean” — we deliver cleanliness without question. ⸻ Design Direction: Typography: • Custom or stylized sans-serif font • Sharp lines, clean geometry, modern feel • Explore slightly modified letters (e.g., distinctive “D” or “N”) • Avoid playful curves or overly decorative fonts • Can be uppercase or lowercase, depending on what feels strongest Mood: • Bold but calm • Quiet confidence • Precision and consistency • Feels like a tech-forward cleaning crew ⸻ Color Palet...

I'm seeking an experienced tutor to teach both Math (Algebra, Geometry, Calculus) and English to teenagers aged 12-18. Ideal candidates should have: - Proven teaching experience with teens - Strong knowledge in all specified subjects - Patience and excellent communication skills Please provide your teaching credentials and experience level.

We have a 3D model of a business-class aircraft cabin interior, including seat geometry and basic structure. We are looking for an experienced Unreal Engine 5 artist (or team) to complete the scene with materials, lighting, and full integration into UE5 for real-time review via Pixel Streaming (or similar solution for web access). -Material & Texture Application -Apply realistic PBR materials (leather, fabric, plastic, metal, etc.) -Includes all seat elements, cabin sidewalls, and small details like tray tables -Lighting & Scene Setup -Realistic UE5 lighting pass (Lumen preferred, or baked if more efficient) -Correct ambience for aircraft cabin environment (window light, overhead spill, ambient bounce) -UE5 Project Assembly -Import and optimize the provided model -Organize s...

I need help modeling structural elements in Revit from laser scanned point cloud data. The required level of detail is LOD 300 (accurate geometry). Requirements: - Expertise in Revit - Experience with point cloud data, especially from laser scanners - Ability to interpret and model structural elements at LOD 300 Ideal Skills: - Proficiency in 3D modeling and understanding of structural components - Familiarity with processing and importing point cloud data into Revit - Attention to detail and accuracy in modeling Please provide samples of similar work.

I need a strain-based failure condition integrated into my existing AN...existing ANSYS model. The current model accurately produces load-displacement results consistent with experimental data but lacks automated failure logic. Requirements: - Add a strain-based failure condition using *DO, IF, and EKILL commands in the SOLVING section only - Utilize the provided full ANSYS input file (.txt) with an existing working model - Follow the provided documentation detailing geometry, materials, test setup, and modeling assumptions - Implement failure logic for specified elements under evaluation Ideal Skills: - Proficiency in ANSYS APDL - Experience with automated failure logic - Strong understanding of strain-based failure conditions Please include detailed project proposals in your ap...