Goip jobs
I need assistance setting up a new SIP Trunk on my FreePBX 14 system. Here's what you will need: • Experience with FreePBX 14 • Familiarity with the setup of SIP Trunks • Knowledge of goip local voice gateway Tasks to be accomplished: • Set up a new SIP Trunk on my FreePBX 14 • Ensure the setup is correctly done using my service provider, goip local voice gateway. Only those with the prescribed skills and experience should bid, as I need this done quickly and accurately. Thanks!
GoIP device configuration and tplink router configuration for voip termination.
Project Description: FreePBX and GOIP Configuration Looking for the initial setup of a FreePBX systems with GOIP GSM gateway for inbound trunks. Softphones will be used by internal clients to receive calls. Skills and Experience Required: - Experience with GOIP GSM gateways. - Proficiency in FreePBX configuration. - Softphone configuration. - Understanding of custom configuration setups, if necessary If you have the expertise in these areas, please bid on this project. Thank you.
Complete Solution for GoIP Hardware (GSM Gateway + SIM Bank) Budget: More than $1000 Primary Purpose: Automation The main goal of a project is a creation of software platform to manage a number of distributed network of GoIP GSM gateways and SIM Banks (SMB). We should be able to make mass calls, SMS/USSD bulk sending & receiving. Asterisk PBX must be used as a Core VoIP component. Features required: - bulk SIM/channel enable/disable/restart - IMEI display/modify - signal level display - human behaviour simulation (to increase SIM cards lifespan) - bulk SMS/USSD sending & receiving - automated SIM cards check, kick dead (blocked) SIM cards if detected - live tracking of ASR and ACD for each SIM card and channel - live total / answered / failed calls per SIM/channel...
I have vicidial and asterisk installed, I need the following and the necessary configurations in vicidial for this to work. 1.- Create 17 trunks that are in the local network, [15 goip + 2 skyline gateway] 2.- Generate a way to call certain trunks together, easily, hopefully with just a few clicks: Example 1: call trunk 8, number 103 and play the dtmf tone of * Example 2: call trunk 9, number 103 and play the dtmf tone of * Example 3: call trunk 10, number 103 and play the dtmf tone of * Example 4: call trunk 16, number 103 and play the dtmf tone of * Example 5: call trunk 17, number 103 and play the dtmf tone of * Example 6: call all trunks 1, 2, 3, 4, 5, 6, 7, 11, 12, 13, 14 and 15 together, to number 103 and play the dtmf...
I am looking for a freelancer who can troubleshoot my Issabel (Asterisk) configuration with GoIP. Specifically, I am experiencing connection issues and there are error messages that need to be addressed. Ideal skills and experience for this job include: - Proficiency in Issabel (Asterisk) configuration - Experience with GoIP configuration - Knowledge of troubleshooting connection issues - Ability to address and resolve error messages. The successful candidate should solve any configuration issue with Goip to handle in-out connections
...I make calls, the calls are charged to my SIP provider instead of being charged to the SIM card, so I'm thinking this part must be configured locally in my machine. I do not have a dedicated server, it is in my understanding that the GoIP machine itself could act as a portable PBX or SIP server, correct me if I'm wrong. I want to focus first on making the calls work or if you can help set up the bulk SMS too, that would be great. I am open to any suggestions that would help me achieve my goal, that is basically to receive and make calls from and to the GoIP Gateway as this will help me reduced costs from my current SIP providers. I prepared a simple form below for those who would like to offer their assistance. I will appreciate anyone who would provide a solu...
...looking for a skilled Java developer to create a system that can receive and process SMS from both 3G modems and other equipment. The system should be able to store all incoming SMS in a database. Skills and Experience: - Proficiency in Java programming - Experience with SMS integration and processing - Knowledge of database management systems and SQL - Familiarity with 3G modems and other equipment Goip The ideal candidate should have a strong understanding of Java development and be able to create a reliable and efficient system for receiving and processing SMS. They should also have experience with database management and be able to ensure that all incoming SMS are accurately stored in the database. the system is similar to sms activate and sms hub I need to receive sms ...
I am looking for experienced professionals to help me with an Asterisk GoIP project. The goal is to integrate GoIP devices with Asterisk and configure them within a LAN network. For this project, I'll need engineers who are familiar with both Asterisk and GoIP devices, as that hardware will be required to complete the project. If you have experience setting up VoIP systems, integrating GoIP devices and Asterisk, troubleshooting existing Asterisk GoIP setups, and configuring hardware and networks, I’d love to hear from you! Please include any relevant details you feel would be beneficial to my project. Any assistance would be greatly appreciated. Thank you for your time.
Project Description: GOIP / FreepBX Configuration I am currently using a GOIP phone system and I am in need of a configuration setup. I am unsure if I require a custom configuration at this time, but it is a possibility. Skills and Experience Required: - Experience with GOIP phone systems - Proficiency in FreepBX configuration - Understanding of custom configuration setups, if necessary - Knowledge of working with a single SIM card service provider If you have the expertise in these areas, please bid on this project. Thank you.
I am in need of a freelancer who can provide me with one-time troubleshooting assistance with my FreePBX system. I have been experiencing configuration errors and I need someone to help me resolve them. The setup is as follows: - VULTR server I have setup FreePBX 16 - I am able to make internal calls between ext 102 and 101 - I am using a GOIP GSM Gateway on my local network with a SIM card in it The problem I am having - I am unable to get GSM Gateway to link together with the FreePBX server. It is located in China, I am physically able to access it and on the same local network. I get error 403 and 401. I only have a basic knowledge of networking / VOIP so I might have made a simple error that someone will be able to spot and troubleshoot. I need live assistance on this, so...
We are looking a telecom engineer to configuration and manage a powersmpp sms platform (need for sms transit) and goip devices on a part time basis. need know softwares powersmpp, asterisk, easyphone. thank you
I am looking for someone to build a GOIP GSM Gateway system that requires a Linux server and will use the VoIP protocol. The connection can be wired or wireless, and no connection is required if desired. This system must be built to specification, with utmost attention to detail and security. I'll provide full documentation of the specific needs and regulations to the successful freelancer chosen for this project.
Hello Everyone, I need someone to assist me with GOIP 16 installation. What I need is 1- developed GOIP Gateway IMEI changing method that looks more authentic. 2- VPN installation for SIP between GOIP TO VOIPSwitch, or GOIP to VPN server to VOIPswitch. If you can do any of both please message me. Thanks.
I am looking for someone to build a GOIP GSM Gateway system that requires a Linux server and will use the VoIP protocol. The connection can be wired or wireless, and no connection is required if desired. This system must be built to specification, with utmost attention to detail and security. I'll provide full documentation of the specific needs and regulations to the successful freelancer chosen for this project.
I'm looking for someone with experience in configuring a GOIP GSM gateway to work with FREEPBX. The role needs to be completed quickly and efficiently, and the results must reach the highest standard. If you feel you have the skills and expertise to complete this project to a high level then please send me your application so we can discuss further.
i want a server to be setup in a core 2duo for 4 core pc using linux, that will be my phone system, add trunks,etc ,all that comprises of a phone system to connect my goip devices
The main part of a project is a creation of software which will help to manage GoIP equipment (Hybertone manufacturer - gateways and sim banks). It should be probably based on a softswitch (Asterisk is NOT OK here). All the features which will be included should be available in the interface - Some basic features are: 1:Simulation of Human behavior -Generation of the flow of incoming calls -The list of 'preferred' numbers. -Imitation of SIM card movement around the city. -Generation of the flow of incoming SMS and USSD requests. -Implementation of daily and weekly cycles of human activity. -Time slots for activation and time slots between calls. 2: SIM cards Operations -The IMEI substitution using an actual base of devices. -Black lists and white lists of phone numbers t...
I need GOIP 4port model configured to manage gsm sms remotely. Most prefered on the web inteface.
I have a mssql db. I would like to create a service that reads the table and send sms via goip on any addition of record
We installed goautodial v4.0 from iso Kamailio running HTTPD OK SSL certificate OK RTPENGINE Ok Our main issue is the following: 1) Agent need to press (Login to dialer 2 times) 2) Can't register GoIP gateway (SIP Trunk) 3) Can't hear any voice. Only Goautodial V4.0 specialist is required...!!
-Install SMS manager server & configure it with GOIP gateway - sms config in web freepbx install configure extensions -config name number sim in portal and pbx income
I need to install vici dial + additional CRM for inbound / outbound calling. Except the physical server I need it to be in the cloud for accessing the GUI. Also for outbound calls I have goip with 4 ports.
...I make calls, the calls are charged to my SIP provider instead of being charged to the SIM card, so I'm thinking this part must be configured locally in my machine. I do not have a dedicated server, it is in my understanding that the GoIP machine itself could act as a portable PBX or SIP server, correct me if I'm wrong. I want to focus first on making the calls work or if you can help set up the bulk SMS too, that would be great. I am open to any suggestions that would help me achieve my goal, that is basically to receive and make calls from and to the GoIP Gateway as this will help me reduced costs from my current SIP providers. I prepared a simple form below for those who would like to offer their assistance. I will appreciate anyone who would provide a solu...
I have freepbx already installed and goip4 gateway already installed and configured. I want to configur freepbx to connect with goip4 gateway 3 lines (simcards) 3 SIP user : user 600 recive call and working with line 1 from number start with 06 user 500 recive call working with line 2 from number start with 05 user 700 recive call working with line 3 from number strat with 07 ...07 variables if user 600 dont respond he redirected to voice record after that send sms message 1 after that send sms offer 1 if user 500 dont respond he redirected to voice record after that send sms message 2 after that send sms offer 2 if user 700 dont respond he redirected to voice record after that send sms message 3 after that send sms offer 3 ps install vpn between freepbx and goip.
Hi Arshad N., I hope you doing well I need to make a script for call forwarding btw dinstar and goip gateways using api of dinstar can you please tell me if you can and what is required for starting :) thanks in advance
create integration module by inheriting model to connect and sens sms with goip gateway documentation of goip gateway :
Требуется человек с GOIP устройством для удаленного подключения моего сим банка. Нужно настроить и подключить мой сим банк к вашему GOIP устройству удаленно.
Setup PBX include simbank + goip, Script for auto calling 1. call from file 2. set duration 3. choos goip 4. sleep duration
I want quickly if can convert any 4g router to gateway gsm voip like goip , skyline And if can do it from install new frimware for that I want to ask can create interface remotely for that like goip gateway
I want to be able to send ussd to goip from my server and get reply
I connected my GoIP Voip Gateway to Issabel Pbx. The two identities are seen but I cannot configure outgoing calls. My goal is to make calls out via GoIP's SIMs. This is only the first step, others will follow later
I want quickly if can convert any 4g router to gateway gsm voip like goip , skyline And if can do it from install new frimware for that I want to ask can create interface remotely for that like goip gateway
Hello, I need to setup a business telephone for me. 1. A goip with telephone SIM cards for Calls and 4G LTE Connection. 2. A PC that can connect to internet via each 4G LTE SIM Card 3. A Phone that can make or receive calls via each SIM Card I already have that GOIP Gateway but dont know how to setup the rest. Please see attached for more details. I look for some experts who can help setting up everything: GOIP configuration, Hardware recommendations etc.
...I make calls, the calls are charged to my SIP provider instead of being charged to the SIM card, so I'm thinking this part must be configured locally in my machine. I do not have a dedicated server, it is in my understanding that the GoIP machine itself could act as a portable PBX or SIP server, correct me if I'm wrong. I want to focus first on making the calls work or if you can help set up the bulk SMS too, that would be great. I am open to any suggestions that would help me achieve my goal, that is basically to receive and make calls from and to the GoIP Gateway as this will help me reduced costs from my current SIP providers. I prepared a simple form below for those who would like to offer their assistance. I will appreciate anyone who would provide a solu...
I configured VICIDIAL for 5 agents and it connected with GOIP8 GSM Gateway for inbound call only, GOIP contains 5 sims with one number , i have an issue drop calls after receiving calls, so I need your support to validate the current setup and solve the issue.
I have a China Skyline SK16-64 GSM Gateway (SIM BOX). Refer to link Below: https://www.chi...(SIM BOX). Refer to link Below: I want to connect this to an SMPP platform so that I can terminate bulk SMS using this gateway. I need someone who can help me make the connection between SMPP platform and this device. This device is using dynamic IP address Please contact me if you already have done the connection for China skyline, GOIP or any other GSM gateway to terminate bulk sms. The key aspect of this is to install a PPTP-VPN on the SMPP server and create accounts for each od the devices to be connected to this SMPP server. The succesful device interfaces will look like what you see on the attachments after succeful connection.
...I make calls, the calls are charged to my SIP provider instead of being charged to the SIM card, so I'm thinking this part must be configured locally in my machine. I do not have a dedicated server, it is in my understanding that the GoIP machine itself could act as a portable PBX or SIP server, correct me if I'm wrong. I want to focus first on making the calls work or if you can help set up the bulk SMS too, that would be great. I am open to any suggestions that would help me achieve my goal, that is basically to receive and make calls from and to the GoIP Gateway as this will help me reduced costs from my current SIP providers. I prepared a simple form below for those who would like to offer their assistance. I will appreciate anyone who would provide a solu...
I NEED GOIP CONFIGURATION AND SERVER SET UP ON WINDOWS OS. I NEED TO BE ABLE TO SEND BULK SMS. MESSAGE ME IF YOU HAVE PRIOR EXPERIENCE WITH GOIP8 OR IF YOU ARE UP FOR THE TASK... THANK YOU !!!
if anyone has expertise in the goip device i need the sms server set up pronto
I NEED AN INDIVIDUAL WHO EXPERTISES IN GOIP DEVICES TO SET UP SERVER ON A WINDOWS PC ETC.
The main part of a project is a creation of software which will help to manage GoIP equipment (Hybertone manufacturer - gateways and sim banks). All the features which will be included should be available in the interface - Some basic features are: 1:Simulation of Human behavior -Generation of the flow of incoming calls -The list of 'preferred' numbers. -Imitation of SIM card movement around the city. -Generation of the flow of incoming SMS and USSD requests. -Implementation of daily and weekly cycles of human activity. -Time slots for activation and time slots between calls. 2: SIM cards Operations -The IMEI substitution using an actual base of devices. -Black lists and white lists of phone numbers to protect from the operator’s calls. -Automated tracking of SIM ...
need to configure my vos 3000 softswitch with my goip 32 and make script working for InterCall between ports in goip
hello i need to open PKG file and add some function on it its my goip gateway update but i need add on function
hello i need to make InterCall script with access for my goip gateways like 2 goip 32 in two locations i need to make script which make intercall from location 2 to location 2 and after every 4 calls connected make call from other gateway to the sim in the gateway which reach the 4 connected calls
