Graphic banner cisco router jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    13,329 graphic banner cisco router jobs found, pricing in USD

    ...we can set this up at our office. We have a Cablevision ( local MSP ) with a 1 static IP address - Router - back to our LAN I know there is a way to setup the firewall temporarily so my engineers can test this without making the firewall the main router. If this works out we may purchase more static IP's so we can test and configure in our office. This

    $50 / hr (Avg Bid)
    $50 / hr Avg Bid
    1 bids

    We're in need of a managed router solution for our customers. We're an ISP and we would like the ability to use an existing home or business CPE router. Ie Cisco, Linksys, Belkin, Netgear. We would like to rewrite it's firmware so that we may control various options remotely. We would like to be able to fully configure router remotely from a remote contr...

    $418 (Avg Bid)
    $418 Avg Bid
    6 bids

    802.11a/b/g/n/ac based wireless architecture. Install, configure, and support Cisco Flex Wireless LAN Controllers & Guest wireless solutions

    $165 (Avg Bid)
    $165 Avg Bid
    9 bids

    ...straightforward. My network setup is as follows: I have a standard ISP router which connects me to the internet. I have my home devices plugged into here. Also plugged into this is an ESXi sever running pfsense. The pfsense contains 2 networks: WAN - plugged into the ISP router LAN - plugged into the virtual network The WAN configuration contains

    $43 (Avg Bid)
    $43 Avg Bid
    6 bids

    We require to source a similar router to the following and have our own [login to view URL] speed test server operate within its own firmware: [login to view URL] We understand that this would normally be linux, however we are after sourcing someone who can demonstrate to be able to create our own [login to view URL] server

    $583 (Avg Bid)
    $583 Avg Bid
    5 bids

    ...deep knowledge of setting up managed switch to run program within its storage and also to transfer data to a cloud server. Good understanding of not only setting up managed Cisco level switch but also to program them to store software to execute daily. The software in switch then transfer the data to a central cloud server- which needs to be setup

    $7 - $22
    $7 - $22
    0 bids

    Cisco Umbrella Reporting API Python scripts based on different use cases

    $472 (Avg Bid)
    $472 Avg Bid
    10 bids

    ...same IP. Each container will be running ISPConfig hosting control panel, with Nginx, as reverse proxy, in front of them. The main task is to build the functionality openshift router like. Proxmox Mail Gateway will be used for routing emails to containers. For our target customers, we prefer to offer the classical hosting paradigm (all services inside

    $25 / hr (Avg Bid)
    $25 / hr Avg Bid
    7 bids

    ...animation in Augmented reality on an Ipad. This is for our next exhibition in February. We think about to show our product (an industrial IoT Router/Gateway) that is connected to an AR robotic arm that is animated. Our Router can send the data from the robotic arm to a cloud. We don't have experience with AR. We only have Ipads. Can you create an app like this

    $49 / hr (Avg Bid)
    $49 / hr Avg Bid
    1 bids

    The goal of the project is to create VPN servers that are behind a router that blocks incoming connections. Just like in a normal VPN application, when you connect to the VPN server you can send and receive network packets using the IP address of the VPN server (and perhaps also access shared network drives), but the biggest difference here is that

    $1413 (Avg Bid)
    $1413 Avg Bid
    1 bids

    I am trying to set up an edgerouter x with policy-based routing for failover purposes. We have dual wan connections. Wan1 - DSL Connection Wan2 - LTE Connection Lan Network - [login to view URL] Vlan 10 Phone Network - [login to view URL] My objective is to have ONLY vlan 10 to be able to use the failover of both wan 1 as main, and wan 2 as failover. I would like the LAN network to o...

    $36 / hr (Avg Bid)
    $36 / hr Avg Bid
    6 bids

    Data Center Work. Room 43, Rack 15, U23. Physical installation of Cisco Router 4321. 1U Device Locate, Connect & Test Circuit with NOC. Location and details to be shared when job is accepted.

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    7 bids

    I have a v fiber internet connection from Airtel I need to make another router provided by Airtel huawei hg630a into a wifi extender

    $16 (Avg Bid)
    $16 Avg Bid
    3 bids

    I need a 3rdparty Cisco webcti finesse gadget with following functions: [login to view URL] call (agent reserved) (phone ringing) 2. Hold a call (agent in taking ) call on hold .. retrive button and time for hold 3. Duration of call./ Wrapup timer 4. Transfer a call 5. End call 6. Make a call to certain numbers

    $155 (Avg Bid)
    $155 Avg Bid
    2 bids
    Server Network Configuration 1 day left
    VERIFIED

    I need to disable static configuration in my Dell server to allow the router to assign a new IP address to it. I will provide access via anydesk app so that you can configure it from my laptop remotely. (laptop is in the same network as server) This is basically what needs to be done. I will provide more background information via chat

    $110 (Avg Bid)
    $110 Avg Bid
    38 bids

    I am trying to set up an edgerouter x with policy-based routing for failover purposes. We have dual wan connections. Wan1 - DSL Connection Wan2 - LTE Connection Lan Network - [login to view URL] Vlan 10 Phone Network - [login to view URL] My objective is to have ONLY vlan 10 to be able to use the failover of both wan 1 as main, and wan 2 as failover. I would like the LAN network to o...

    $29 / hr (Avg Bid)
    $29 / hr Avg Bid
    5 bids

    I need a 3rdparty Cisco webcti finesse gadget with following functions: [login to view URL] call (agent reserved) (phone ringing) 2. Hold a call (agent in taking ) call on hold .. retrive button and time for hold 3. Duration of call./ Wrapup timer 4. Transfer a call 5. End call 6. Make a call to certain numbers

    $158 (Avg Bid)
    $158 Avg Bid
    3 bids
    Cisco ASA/Firepower 1 day left
    VERIFIED

    I need someone to configure threat feed/ips signatures updates, HA conf, setup ACL and setup policy map to set inline deployment of firepower module

    $210 (Avg Bid)
    $210 Avg Bid
    12 bids

    For our ERP Odoo 11, we need to connect and succesfully print POS receipts on our 3 thermal printers (model "Custom KUBE II F"). We hav...different places. Odoo 11 will run on a virtual server on cloud (DigitalOcean). The printers are already succesfully configurated to be connected on a standard network through a router and ethernet cable connection.

    $253 (Avg Bid)
    $253 Avg Bid
    7 bids

    We need help in resolving connection problem between these 2 routers. We are unable to ping the Draytek 2830 router, although the settings/ parameters seem to be right.

    $67 (Avg Bid)
    $67 Avg Bid
    10 bids

    ...CP-7821-K9 Cisco UC Phone 7821 9 10 CON-SNT-CP7821K9 SNTC-8XSXNBD Cisco UC Phone 7821 9 11 ISR4331-V/K9 Cisco ISR 4331 UC Bundle, PVDM4-32, UC License, CUBEE10 1 12 CON-SNT-ISR4331V SNTC-8X5XNBD Cisco ISR 4331 UC Bundle, PVDM4-32, UCL 1 13 SL-4330-1PB-K9 IP Base License for Cisco ISR 4330 Serics 1 14 SL-4330-UC-K9 Unified Communication License for Cisco...

    $278 (Avg Bid)
    $278 Avg Bid
    7 bids

    we have cisco ASR router need to integrate it with freeradius, to provide connection rate/speed limit based on the plan provided by freeradius. integration between freeradius and cisco ASR has been completed successfully but we still need to apply connection rate/speed between freeradius and cisco asr router

    $142 (Avg Bid)
    $142 Avg Bid
    11 bids
    ip tech supporter 14 hours left

    Hi ip need some one with tech support experience for settup router with vpn

    $25 (Avg Bid)
    $25 Avg Bid
    14 bids
    cisco network design 11 hours left
    VERIFIED

    small office of a company complex network design is required, pkt i cannot open, somebody tried to do it before, maybe is fake the pkt..file

    $148 (Avg Bid)
    $148 Avg Bid
    35 bids

    ...g. 24 hours, a week, a month etc. Requirement #2 (Network Monitoring) • A dashboard which shows the STATUS of a remotely located modem and router. • I should be able to click on certain system (modem & router) and see the number of users connected at any time & other necessary data. You can also contact me if you can work on only one aspect of

    $41 (Avg Bid)
    $41 Avg Bid
    3 bids

    ...of potential clients wanting something similar but who didn't have space for a computer and just wanted a standalone receipt printer which would connect by WiFi to a nearby router. Until recently, this wasn't really possible as there were no true standalone/cloud ready thermal receipt printers on the market but earlier this year, a company in Shenzhen

    $277 (Avg Bid)
    $277 Avg Bid
    13 bids

    I need someone ASAP that can help me remote configure my cisco router and switch IPV6. Contact me right away!!!!!!!!

    $175 (Avg Bid)
    $175 Avg Bid
    18 bids

    I have a lot of spa Cisco phones that are locked with pass word so I am not able to reset . Is that something you can help me with . I hire these phones out and these were returned locked and nobody knows passwords

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    1 bids

    ...program on a router Router Link [login to view URL] CPU: MediaTek MT7628N CPU Cores: 1 CPU MHz: 580 Flash MB: 8 RAM MB: 64 server send call to router >>router send to voip gateway we install our program on router and our router OS is openwrt like server to router resisted and router to Voip gateway

    $579 (Avg Bid)
    $579 Avg Bid
    5 bids

    am trying to practice basics of Cisco ISE and a switch on gns3 . i just need someone to remotely install them for me through Teamviewer so i can test it. max 40 USD.

    $25 / hr (Avg Bid)
    $25 / hr Avg Bid
    1 bids

    we have 2 cisco router 2911,2 firewall 5516 , and 2 router 3750 , and 1 server 2012 standered as dns we need to configure them as a local network with a group policy and dns we need to configure them remotely

    $416 (Avg Bid)
    $416 Avg Bid
    14 bids

    am trying to practice basics of Cisco ISE and a switch on gns3 . i just need someone to remotely install them for me through Teamviewer so i can test it. max 40 USD.

    $33 (Avg Bid)
    $33 Avg Bid
    13 bids

    ...of work would be: · Installation of Cisco devices could be layer 2/3 switches, routers. · Decommission of Cisco devices could be layer 2/3 switches, routers. · Jack / Port activation. · Fiber / CAT 6/5 Cable patching & laying. Tools Required: · Laptop · Cisco Console cable ·...

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    8 bids

    Hi Super VR & AR Star, We are developer of router modems for IoT applications and industry. So our products are basically black boxes, which is pretty boring when we show them on exhibitions. We tested the Vuforian View App from the AppStore and think about to build our own app, to show a use case of our products with AR technology. We are not sure

    $1 / hr (Avg Bid)
    $1 / hr Avg Bid
    1 bids

    connect cache to cisco and route port 80 with exceptional ips to work DSCP 12 in mikroitk without mark routing>>>

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    I have i laptop i want to make into a web server. Screen is broken so it has to be desktop version. I want server (website) to be public and Also ftp access...i laptop i want to make into a web server. Screen is broken so it has to be desktop version. I want server (website) to be public and Also ftp access from other devices. Router Access admin

    $31 (Avg Bid)
    $31 Avg Bid
    16 bids

    LAN/WAN Router Security and ACL Router-on-a-stick and routing protocol OSPF config Switch VLAN, 802.1Q Trunking, VTP configuration DHCP and DHCP Relay Static and default routing WLAN

    $37 (Avg Bid)
    $37 Avg Bid
    5 bids

    i need to VOIP SIP to SIP call G729 optimization bandwidth SERVER A =asterisk server Server B =Openwrt ROuter server A&B connected to VPN VOIP device COnnected to Openwrt ROuter we send calls Server A to VOIP device SIP to SIP codec g729 its use per calls 30KBPS we want to conpress it if you can make it under 15KB we are happy i saw too many peppole

    $909 (Avg Bid)
    $909 Avg Bid
    6 bids

    1. Career Aspiration - What is your career Aspiration for a Network Engineer - Need approx 100-130 Words. Points : Cisco CCNA certification , Network Diagram, Learning more about the company and requirements - This would be like a long term goal - 5 Year 2. Development Goals :I need about 4 development goals for a Network Engineer - This would be

    $35 (Avg Bid)
    $35 Avg Bid
    22 bids

    ...solution; I have a VPC in Terraform that has DNS C-Names for each server, that is not my problem. There are two bastion servers that are on prem that are either pointed to by the router x.x.x.x or their internal IPs [login to view URL] ejs-blue and [login to view URL] ejs-green? Trying to have a solution for deploy jobs and other procedures to have directions? 1) what is

    $41 (Avg Bid)
    $41 Avg Bid
    5 bids

    Cisco to MT DSCP Problem DSCP 12 for cache server

    $25 (Avg Bid)
    $25 Avg Bid
    1 bids

    I have a mikrotik router connected to many Aps I want to replace my hotspot feature with Social Like or check in to get access to the internet

    $144 (Avg Bid)
    $144 Avg Bid
    7 bids

    ...IPsec Task: it is necessary from network A behind router A to send all traffic by the tunnel to bring network A to the world through router B. LAN A => Router A => i-net => Router B => LAN B Router A - VyOS (you can change the OS) Router B - EdgeRouter (UBNT) hardware router, cannot be changed Router B - supports IPsec, Open...

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    9 bids

    i had asterisk/freepbx installed on centos recently. One DID on the SIP trunk is working fine but other DID has two...before phones ring 2. phones ring only once....so calls are lost freelancer who installed this for us blames this on network. he made us move the asterisk server from behind router to public. He still continues to blame it on network.

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    4 bids

    -Code written in Java -Easy to use graphical user interface -Provides system information (at least five different pieces of information based on Cisco 1142n access points) -Uses at least SNMPv3 -Displays traps received from the access point -Device reachability test (ping) -Captured traps are logged into an SQLite database -Destination IP should

    $167 (Avg Bid)
    $167 Avg Bid
    7 bids

    i have some projects in field related to communication, need a freelancer having good command in NS2/NS3 and MATLAB and Cisco packed tracer. further details will be provided in chat. I need someone who can finish the work within 2-3 days

    $87 (Avg Bid)
    $87 Avg Bid
    3 bids

    -Code written in Java -Easy to use graphical user interface -Provides system information (at least five different pieces of information based on Cisco 1142n access points) -Uses at least SNMPv3 -Displays traps received from the access point -Device reachability test (ping) -Captured traps are logged into an SQLite database -Destination IP should be

    $37 (Avg Bid)
    $37 Avg Bid
    2 bids

    I have some rules configured on a Cisco firewall "rules_text". i need those lines to be exported into an Excel spreadsheet like in "rules_excel" in a specifique maner.

    $73 (Avg Bid)
    $73 Avg Bid
    4 bids

    ...but not in Ubuntu/Redhat as of now. But AFAIK, Cisco confirms that Linux can connect by using mentioned method. Currently, following is the key components in picture Wired 802.1x with PEAP-EAP-TLS Authentication method. 1) Supplicant ( Embedded linux os ) 2) ISE-2.4 ( Used as Radius server ) 3) Cisco Switch with 802.1x port enabled ( SG300-52 52-Port

    $525 (Avg Bid)
    $525 Avg Bid
    3 bids

    you must have strong knowledge of IT Security and firewalls, using Pen testing tools and generating reports. must be certified in Cisco Security

    $43 / hr (Avg Bid)
    $43 / hr Avg Bid
    19 bids