My recent searches
Filter by:
    Job State
    7,699 gsm obd jobs found, pricing in USD

    mechanical engineer required for obd device making

    $82 (Avg Bid)
    $82 Avg Bid
    15 bids

    Need to install USB dongle as GSM trunk into Issabel PBX system. BUDGET UP TO $40!!!!!! Bid ONLY if you agreed with the budget.

    $92 (Avg Bid)
    $92 Avg Bid
    2 bids
    GSM Device -- 2 5 days left

    I need a device, that will allow smartphones automatically connect to it and provide internet connection for smartphones.

    $2472 (Avg Bid)
    $2472 Avg Bid
    7 bids

    Need to setup an Asterisk, FreePBX based VOIP system with IVR and with some other special requirements. PLEASE! Bid only if you have awsome experience with Asterisk, FreePBX, and automated phone surveys. You will need to install, configure the whole system over SSH connection, the system will use multiple USB modems as GSM trunks. IMPORTANT! I don't want to waste your time, please do the same...

    $211 (Avg Bid)
    $211 Avg Bid
    10 bids

    I am looking for the person who helps me to develop digital dashboard for old VW T2 baywindow vehicle. The main idea is to pretend original instruments (design). I belive there is no need to write a program "from the begining". I belive there are some opensource projects we can use as a startpoint. Like carberry, i.e. [login to view URL] As I am quite familiar with RPI - I thought maybe ...

    $281 (Avg Bid)
    $281 Avg Bid
    7 bids
    Voip Dailer 3 days left

    Project Description: We need a voip Android mobile dialer like iTel dialer, TP Smart Dialer and that has about 5 screens. (Messages; Recent; Contacts; keypad; About; Settings Invite to Use; Privacy). The app should integrate with iTelswitch. The main functions of the app will include: 1. Making & Receiving VoIP Calls Over 3G, WiFi, GPRS 2. Should not kill the battery of the mobile device ...

    $1661 (Avg Bid)
    $1661 Avg Bid
    4 bids

    The following components need to be connected: Heartbeat sensor, Pedometer, Temperature Sensor, GSM module, ADC. The output need to be displayed on Android App which is already available. All the components and code is available. Only online support is needed.

    $25 (Avg Bid)
    $25 Avg Bid
    4 bids

    Im looking for someone to make me a tiny Arduino based project which will allow a user to track the person with the device using GPS (GSM board preferably) and also start and pause recording sound using a microphone at a push of a button. The device must also have a buzzer which will beep at certain times

    $152 (Avg Bid)
    $152 Avg Bid
    8 bids
    GSM Gateway Voip SBO VIBe 2 days left

    I want configure GSM gateway on public ip address with vpn or SBO Vibe [login to view URL] [login to view URL]

    $20 (Avg Bid)
    $20 Avg Bid
    1 bids
    stritch me 10 t-shirts 1 day left

    Should have to stitch 10 t-shirts, and the designs will be given by me, cloth will not be provided, it should be bought by the stitcher and the t-shirt cloth should be very high GSM(160 or 170GSM).

    $83 (Avg Bid)
    $83 Avg Bid
    8 bids
    MQTT weather station 21 hours left

    The Ilgenfritz Engineering company is located in Bavaria, Germany and develop solutions for the Agriculture business. We are looking for a company for embedded development based on a LILYGO TTGO T-SIM7000G Module. The developer must have very good experience in ESP32 programming. The IDE should be Microsoft Visual Studio Code with Platform IO. Digital, analog and SPI / I2C signals must be proc...

    $1749 (Avg Bid)
    $1749 Avg Bid
    26 bids

    Looking to have a Raspberry pi control a Canon DSLR camera using gphoto2 Long exposures of 27Seconds F2.4 from 10pm - 4am anytime outside that system shall shut down to preserve power in 20AH battery with 20WATT solar panel and charge controller but before shut down transfer files via ftp over a ubiquiti antenna from remote location to my local server Equipment that's acquired ip68 we...

    $794 (Avg Bid)
    $794 Avg Bid
    11 bids
    Install Freepbx 1 hour left

    Install and configure and integrate with GSM gateway and FXO Gateway on cloud and On prmsis and bridge them. Create Ext,IVR, Quw similar to existing 3cx . STABLE SNG7-PBX-64bit-2002 Release Date: February 2020 FreePBX 15 • Linux 7.6 • Asterisk 13 or 16 Supports UEFI and Legacy BIOS booting

    $312 (Avg Bid)
    $312 Avg Bid
    12 bids

    we need an expert in AT command to help us use this GSM modem as a sim writer

    $383 (Avg Bid)
    $383 Avg Bid
    5 bids

    I need a Person how can Configuraed VPN Networks. i have outside Station that i want connect from my home Computer over my VPS server. there is all ready vpn Server installed. i am uesd: Softehter VPN. so that means, Homeplace :192.168.1.x VPN Server : [login to view URL] GSM Modem (Router) : OPENVPN [login to view URL] Local side at Modem LAN: [login to view URL]

    $22 (Avg Bid)
    $22 Avg Bid
    5 bids

    Hi Using Raspberry PI and an RTL-SDR i need to passively analyze IMSI numbers and signal strengths. Need someone very familiar with GSM protocol and gr-gsm and how to capture the data and parse it. Happy to use github existing projects. Regards, Mohamad

    $852 (Avg Bid)
    $852 Avg Bid
    9 bids

    we are looking for an expert sim card re writing in linux platform with a gsm modem as a sim writer

    $545 (Avg Bid)
    $545 Avg Bid
    3 bids

    I would like to send bulk messages using Dinstar GSM Gateway. Looking to implement using a free software

    $9 (Avg Bid)
    $9 Avg Bid
    1 bids

    expected deliverables of this project are listed below: a) Understanding the concept of Home automation and grasping the evolution in this field. b) Connecting the Home appliances (minimum number 3) to the household WiFi router through arduino and . c) Establish a network between Home WiFi router and cell phone using GSM. d) Implementation of the hardware and remotely control the appliances throug...

    $178 (Avg Bid)
    $178 Avg Bid
    41 bids

    we need an expert in sim info rewriting that will be able write sim IMSI and ICCID and Ki info to a blank sim using a AT command and a GSM modem as physical writer

    $569 (Avg Bid)
    $569 Avg Bid
    4 bids

    We are looking for someone to build a GSM data Receiver (contactless EMV Skimmer sniffer, read and clone all kind of Credit Card that gets track 1,2 and the pin. Software Should decrypt the GSM data traffic coming from POS systems, and separate the POS info from the other traffic the receiver picks up.

    $724 (Avg Bid)
    $724 Avg Bid
    16 bids

    I need Auto OBD II Bluetooth Scan Tool & Code Reader App for iPhone and Android just like the FIXD

    $1171 (Avg Bid)
    $1171 Avg Bid
    16 bids

    We need to put one IoT device like a notebook in truck. That IoT device will get all the vehicle related data from the vehicle dashboard sensor. There is one smart steering where some sensors have been put. IoT will collect these data and will send it over GSM to remote server.

    $391 (Avg Bid)
    $391 Avg Bid
    13 bids

    need a translate for an OBD manual. Around 1500 words.

    $38 (Avg Bid)
    $38 Avg Bid
    48 bids

    Project in English / Proyecto en Español It’s about a PCB with ESP32 and SIM808. Main code optimization Keep only the essential code in the main file and Put setting/configuration parameters and functions in separate files and link them to the project. Main code improvement Add wifi alternative • If wifi detected, send by wifi. If no wifi but GPRS activate, send through GPRS. ...

    $179 (Avg Bid)
    $179 Avg Bid
    25 bids

    Design Auto OBD II diagnostic App for iOS & Android

    $1590 (Avg Bid)
    $1590 Avg Bid
    16 bids

    I need a case for my portable sensor. -SIM Card slot - USB Slot -3x User Buttons from side - One big whole in the middle - sd card - Display - portable - should be able to open and closed - 3 User LEDs (D11,D9,D10) - some mechanism to connect to a bicycle - additional space for a gps antenna (28x28x7mm ) - additional space for gsm antenna (51x16x0,2mm)

    $163 (Avg Bid)
    23 entries

    Hi, I want to to use any mobile phone as sip gsm gateway

    $1133 (Avg Bid)
    $1133 Avg Bid
    13 bids

    We have a pcb able to capture and store inside rs232 and ps2 input , this pcb actualy is under production , but we lost the code in a disaster and we just have the hex and files for production , and now we requeire some one able to replicate the functionality of our pcb ,modify the gerber and add a gprs module and program a upload to server function , this need to be coded in a microcontroller Pic...

    $236 (Avg Bid)
    $236 Avg Bid
    22 bids

    Hi Jitendra , I need gsm signal repeater full design and all bands

    $198 (Avg Bid)
    $198 Avg Bid
    1 bids

    Hello, I'm making a final project dissertation, based on arduino, the main idea of the project is connect an arduino with a GPS Shield, GPRS/GSM Shield and 4 different sensors (pH, Temperature, Humidity and Water Quality), and be capable of tracking the arduino and get different data values of the sensors depending of the location, my problem is assembling all of this and see the values and t...

    $180 (Avg Bid)
    $180 Avg Bid
    30 bids

    We want to develop apps where we can send gsm call through wifi router

    $1750 (Avg Bid)
    $1750 Avg Bid
    3 bids

    Our project title is " Vehicle accident place detection and rescue system using Raspberry Pi 3 MODEL B, MEMS sensor, GPS, GSM and Web Camera ". We want our project code to be written and must be able to execute it anywhere even on our own our project kit. Need a reasonable bid amount.

    $168 (Avg Bid)
    $168 Avg Bid
    6 bids

    Our project title is " Vehicle accident place detection and rescue system using Raspberry Pi 3 MODEL B, MEMS sensor, GPS, GSM and Web Camera ". We want our project code to be written and must be able to execute it anywhere even on our own our project kit.

    $159 (Avg Bid)
    $159 Avg Bid
    6 bids

    Required a fully functional embedded solution ( STM 32 based) for our elevator based startup. . Embedded software .Serial Communication GSM/IOT supported We can reconsider the cost/budget if required

    $783 (Avg Bid)
    $783 Avg Bid
    16 bids

    I need a freelancer who has experience in the automobile OBD and OBD-II protocol experience in the low power PCB designed and Firmware design of the controller.

    $100 (Avg Bid)
    $100 Avg Bid
    10 bids

    I need you to develop some software for me. I would like this software to be developed for Windows . I need v22.3.4 LTE GSM data receiver software made.

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    5 bids

    I have Huawei mobile dongels with gsm card connected to my compiuter and I use a program named Mobile partner to call from my compiuter. I need 1. Find latest drier for Huawei mobie connect modell E160E. 2. Integrate the system to a free sale crm

    $33 (Avg Bid)
    $33 Avg Bid
    3 bids

    Hello I'm an early adopter but have no idea about programming apps or the OBD 2 standard. But I hate keys and have no money for a Tesla. I am looking for an APP for my I Phone XS that makes it possible to open, close and start my VW Golf V MY09 car. I have an ELM 327 MINI Bluetooth adapter that connects the car to my cell phone. Wifi would also be possible. Face ID would be nice but doesn&...

    $151 (Avg Bid)
    $151 Avg Bid
    1 bids

    The Panic Button system involves the intentional activation of an electronic device, its objective is to notify the Support Central Station in case of emergency ** Need the design and the PCB and the Fabrication of the Devices (optional) REQUEST:     * Electronic Device with 5m Wired Button.     * 2 Wireless Button that can support 70 or 100 meters (linke...

    $202 (Avg Bid)
    $202 Avg Bid
    3 bids

    Apple IPhone 12 Pro Specifications Summary PERFORMANCEApple A13 Bionic STORAGE64 GB CAMERA13MP + 13MP + 13MP BATTERY4440 mAh DISPLAY6.06" (15.39 cm) RAM6 GB LAUNCH DATE IN INDIAMay 15, 2020 (Unofficial) Key Specs FRONT CAMERA13 MP BATTERY4440 mAh PROCESSORApple A13 Bionic DISPLAY6.06 inches RAM6 GB REAR CAMERA13 MP + 13 MP + 13 MP Special Features OTHER SENSORSLight sensor, Proximity sensor, ...

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    2 bids

    Looking for a skilled person who is capable of designing / making / consulting on a portable IMSI /IMEI / GSM / 4G LTE Catcher which meets the following requirements: - Collect IMSI, IMEI of all mobile users present in the target area and all mobile users entering/leaving the area (with timestamp). - Upload (server/mail) previous content on a daily basis - Create alerts (mail/sms) when a predefi...

    $1076 (Avg Bid)
    $1076 Avg Bid
    6 bids

    Requirement of a full time guy who have |Knowledge in various wireless technology like wifi,bluetooth,rfid,gsm Need to set up the network in a very hostile environment

    $417 (Avg Bid)
    $417 Avg Bid
    13 bids

    I need your "portable 3G wifi router & GSM voip gateway

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    I want gsm data reciever to hack atm and pos frequencies to server

    $1500 (Avg Bid)
    $1500 Avg Bid
    1 bids

    I need a PCB Layout and later firmware developed for On Board Diagnostics (OBD-II) scanner with Bluetooth connectivity. The casing for this tool is already developed. Short listed candidates will be provided with complete project specifications and required to deliver x2 working prototypes of the scanner.

    $1551 (Avg Bid)
    $1551 Avg Bid
    13 bids

    I'm inquiring about a GSM data receiver pos/atm

    $750 (Avg Bid)
    $750 Avg Bid
    1 bids

    Inquiring about GSM data receiver pos/atm

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    1 bids

    I'm inquiring about GSM data receiver pos/atm

    $800 (Avg Bid)
    $800 Avg Bid
    1 bids

    Hello sir. I’m a masters student and I am midway through designing my project to complement my coursework. I’m doing data analytics for visitor count data. Currently I have managed to get help from a friend to capture wifi mac address (probe requests) to count foot traffic (visitors) but when I did a manual verification count of actual visitors on site I found out that many users were ...

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids