Hire a programmer for arduino jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    10,351 hire a programmer for arduino jobs found, pricing in USD

    ...build a web application which manage the textile industry and want to integrate a electronic piece into the solution, below further details: - we want to use an ESP8266 wemos D1 R1 wifi enabled board and connect it to a IR Sharp sensor range 10-80 cm, the sensor will be set on a textile production line to watch hangers going out which means a product

    $455 (Avg Bid)
    $455 Avg Bid
    27 bids

    Software ( firmware ) in free rtos for a logger based on ATSAMD21 ( e21 and G21 ) based on arduino . Software read from a i2c sensor of Microsensor MPM3808 , temperature digit sensor and save data on a eeprom or FRAM i2c. Save also data of battery % and date. A small windows app for download data and set saving time a F.S. I2C sensor ( min an...

    $295 (Avg Bid)
    $295 Avg Bid
    2 bids

    ...are an Australian company based in Adelaide. We are developing a web-based management software for remote sensors installed in waste management facilities. The Cloud system includes Amazon Web Services, Microsoft SQL database, mobile apps (Windows, Android & IoS), Arduino-based controller for data collection and machine control, TCP/Ip and GSM (3G) based

    $360 (Avg Bid)
    $360 Avg Bid
    43 bids

    i would like to make a motor cruise control board board type arduino mega 2560 input speed using Standard Matrix Key Pad speed measured by proximity sensor 12V dc (PR12-4 DP) speed control volt 0:12V dc (MCV116A1407) speed indicator pulse meter (MP5W)

    $72 (Avg Bid)
    $72 Avg Bid
    4 bids

    i have overall 7+ years of experience,i have good experience in Arduino,c, c++,Python development side.

    $70 (Avg Bid)
    $70 Avg Bid
    1 bids

    ...you able to make a Software ( firmware ) in free rtos for a logger based on ATSAMD21 ( e21 and G21 ) based on arduino . Software read from a i2c sensor of Microsensor MPM3808 , temperature digit sensor and save data on a eeprom or FRAM i2c. Save also data of battery % and date. A small windows app for download data and set saving time a...

    $282 (Avg Bid)
    $282 Avg Bid
    1 bids

    The arduino gets signals from 4 Light dependent resistors in a voltage divider, from there it should give the signal to a relay module and to the two linear actuators. [login to view URL]

    $44 (Avg Bid)
    $44 Avg Bid
    10 bids

    I need the ON OFF buttons to be set to work on time as well. For example, button R1 I can set it to let the relay on for a few seconds I want R2 as well as R3 and R4 and it is also possible to disable the delay delay time, leaving only on and off when clicking.

    $20 (Avg Bid)
    $20 Avg Bid
    3 bids

    Need to design a Arduino/Genuino or Raspberry Pi camera module that has a PIR Sensor (motion) and can transmit jpeg or similar thumbnail images via RF module to a home base. This will run off of battery power. Examples of parts- [login to view URL] [login to view URL]

    $1249 (Avg Bid)
    $1249 Avg Bid
    22 bids

    Necesito unir dos codigos arduinos con threads, para simular multitarea.

    $46 (Avg Bid)
    $46 Avg Bid
    5 bids

    I have built a CNC machine know as the MPCNC. You can see it at www.v1engineering.com. I would like to add a touch screen HMI to it using the 7" TFT 800x480 touchscreen. I purchased the screen from Adafruit along with a RA8875 Driver board. You can see it here: ([login to view URL]

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    13 bids

    i need someone to write me a code on an arduino nano that is using network shield with the help of the UIPEthernet library. i need to upload 4 x ADC values to things speak.

    $30 (Avg Bid)
    $30 Avg Bid
    8 bids
    control light 5 days left
    VERIFIED

    control light, intensity,lamp serie 70 w sensor arduino

    $86 (Avg Bid)
    $86 Avg Bid
    26 bids

    ...the fuel mixture on a turbo motor cycle. It’s a budget landspeed motorcycle. I did some testing and tuning at an offical NZ avent last week and it outperformed all expectations. I struggled with getting fuel mixture right while riding though. At the moment I control manually while riding using exhaust gas read out and turning a small valve either in

    $190 (Avg Bid)
    $190 Avg Bid
    14 bids
    grass cutting robot 5 days left
    VERIFIED

    Remotely control a robot from a website using ROS nodes assist in development of ROS based C++/Python code for establishing TeleOp mode. Assist in development of f/e wireframes Right now I have the 4 motors being controlled by arduino using SPI. I am now wanting to send a JSON object from a remote webserver using ROS_bridge to arduino using ROSser...

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    4 bids

    ...build a count up timer using Arduino . For example : if using a laser beam or photo electric sensor.. once the beam or connection is broken the timer starts and once the beam or connection is solid or connected the timer stops. I need to program steps in the process. For example : after the timer hits 4 minutes a notification comes across on a ...

    $441 (Avg Bid)
    $441 Avg Bid
    14 bids
    Arduino #3 5 days left

    ...someone to code an Arduino to do the following: I have an Arduino, four servos, one LCD 16x2 screen, one 3x4 keypad, 6 LED lights, and one buzzer. I want the screen to display an intro screen and then ask for a 4 digit code and the first LED will blink. If the wrong code is entered the red light will come on and the buzzer will sound for 2 seconds. If

    $96 (Avg Bid)
    $96 Avg Bid
    26 bids

    I am looking at an experience firmware programmer who can setup a hobby project for us using ADXL 354 or 355 accelerometer. Need to access X,Y and Z G values and convert to mm/s. Temperature reading also to be included. Arduino or similar development board to be used.

    $214 (Avg Bid)
    $214 Avg Bid
    9 bids
    Knob turning 4 days left

    Pretty much I need help setting up an entire project (including parts needed etc.). I presume an arduino/raspberry pi + a stepper motor + a coupler would be the best way to go? I would be 3D printing the mounting myself I would like a program which will turn this knob in the following ways: Turn to random position from 0 - 100 - needs to go up and

    $164 (Avg Bid)
    $164 Avg Bid
    19 bids

    I need the code for: 2x sensors DHT 22 and 1x HX711 to be connected to Arduino nano, and Arduino nano to be connected to SIM 800l. together to sent data to thingspeak. Important: it is important in program to put more APNs, for multiple SIM card.

    $33 (Avg Bid)
    $33 Avg Bid
    14 bids

    I need you to develop some software for me. I would like this software to be [login to view URL] developer for arduino to connect in mqtt cloud

    $146 (Avg Bid)
    $146 Avg Bid
    26 bids
    arduino car 3 days left

    arduino bluetooth controlled car

    $16 (Avg Bid)
    $16 Avg Bid
    3 bids

    Hi, We are looking for expert, who have good knowledge of PCB Designing, Python Programming & also have good knowledge with major Boards like PI, PIC, Arduino & Beaglebone.

    $134 (Avg Bid)
    $134 Avg Bid
    12 bids

    wifi module esp8266, web page/Android , arduino nano will be provided

    $118 (Avg Bid)
    $118 Avg Bid
    18 bids

    I'm trying to implement basic Arduino project using Assembly language, Please contact me for more information

    $19 (Avg Bid)
    $19 Avg Bid
    6 bids

    ...(24mA when activated) to the lowest possible - ideally around 5mA (while of course ensuring the circuit works for its purpose). It is worth noting down that the circuit works by taking the value of the integrated light sensor (and if below a certain level) then the integrated LEDs will be activated by any movement that is picked up by the accelerometer

    $27 (Avg Bid)
    $27 Avg Bid
    7 bids

    We are a laboratory of research in France, and we are working on a robotics application. We need to customize a circuit for this application, this means the design and the implementation of the circuit, we need to choose the best ICs according to our requirements.

    $213 (Avg Bid)
    $213 Avg Bid
    30 bids

    the library WIFIMANAGER enables a browser ti change ssid and password . i need an additional page with 4 fields atha will be saved to the EEPROM from address 1 -100 . EEPROM size should a parameter *DEFAULT 4096)

    $164 (Avg Bid)
    $164 Avg Bid
    11 bids

    Hi, I need Arduino base speed control of 3Phase induction Motor please only bid if you have previous experience in this file because before awarding i will check what you have done in this field.

    $219 (Avg Bid)
    $219 Avg Bid
    12 bids

    use android studio to build app use firebase as database use arduino uno and sensors like mq135 and mq 7 to measure air use mobile microphone to measure noise via android app build

    $255 (Avg Bid)
    $255 Avg Bid
    6 bids

    Operation: 1. Sense Button 1:...Receive data from server 4. Write data received form server to Serial Port Setup 1. Create Web Page with Secure Login/ Pwd to access configuration page. 5. Configuration Page: a. Set http Request url. As per Button b. Printer Properties. (speed) Require turnkey project code & successful testing. Time Line 3~5 days.

    $114 (Avg Bid)
    $114 Avg Bid
    10 bids

    Create a counter with web interface where you can register the product that will be county. The result of the meter and the type of product registered in the user interface must be recorded in a mysql database every 5 minutes. See attached file for more detail Thank you

    $535 (Avg Bid)
    $535 Avg Bid
    36 bids

    Hello, I want to experiment with a few peripherals / components compatible with an arduino (UNO) board : 1st step / milestone : detect a moving animal / human, then emit a light (infrared sensor HC-SR501 + led) also find a way to debug when the signal of the infrared sensor has changed of state (something detected -> nothing detected, nothing detected

    $109 (Avg Bid)
    $109 Avg Bid
    14 bids

    ...existing Arduino library modified to support newer 16x32 P10 RGB LED panels out of China Newer panels work, but the matrix pattern needs to be reconfigured in the library, otherwise the output on the panel is gibberish. Panels are 1/4 scan, HUB75, 16x32, P10 The target Arduino is a MEGA2560. We can supply hardware hookup information for the Hub75

    $116 (Avg Bid)
    $116 Avg Bid
    13 bids
    Arduino Uno R3 1 day left

    A dust sensor has been connected to the Arduino to calculate the dust in terms of voltage for every 2 [login to view URL] code is already [login to view URL] have to add the real time date and time to this code and Program the Arduino to write this date, time, and voltage values to a text file locally saved to your [login to view URL] done assist in adding a...

    $217 (Avg Bid)
    $217 Avg Bid
    21 bids

    I have a work related to Arduino and i am looking for an expert electronics engineer who can handle this work in good way. I have attached all details of work, take a look at attached files and let me know if you can do this work

    $28 (Avg Bid)
    $28 Avg Bid
    9 bids

    ...reader. what i want now is to build a time attendance ( it just push data to my server) - First i want to connect via bluetooth to esp32 and configure esp 32 from it (change wifi password etc). esp32 then need to send data to my server when card punched (http post or get) i want to use gsm module instead of wifi for internet connection. use freertos

    $256 (Avg Bid)
    $256 Avg Bid
    14 bids

    ...required Arduino based embedded Queue Token printing Application Requirements: 1. Arduino Module Connected with printer 2. When user Pressed Get token button then arduino create http request and send to server for token response after that successful get response send to printer for token receipt. Note: Please at least one visit to our company for disc...

    $217 (Avg Bid)
    $217 Avg Bid
    9 bids

    I need a device for tyre shops, that can set the user given pressure in tyres. The one I have attached works with 2 magnetic valves, plus a pressure sensor. One valve is for inflation, one for deflation, in between the sensor periodically measures actual tyre pressure, and through control (Arduino) it decides how long next inflation/deflation cycle

    $669 (Avg Bid)
    $669 Avg Bid
    21 bids

    When a button connected with ESP8266 is pressed, a feedback is to be sent to AWS IoT, the data should be stored in a database for further process. Arduino IDE or Mongoose OS for coding the ESP8266 is preferred.

    $20 (Avg Bid)
    $20 Avg Bid
    8 bids

    I am trying to build a device that contains an arduino, a motor and a microphone. The goal of this device is if gived a setpoint sound frequency the motor should rotate a string until the setpoint is reached. I have all the libraries needed and an example of a code that works. However the code needs some adjustments because the circuit that I am usi...

    $117 (Avg Bid)
    $117 Avg Bid
    23 bids

    problem is output from matlab and arduino different (she want it same) So don’t know how do result between matlab nntool and output arduino same.

    $40 (Avg Bid)
    $40 Avg Bid
    2 bids

    I need a very simple arduino based script that will allow me to read the state of a single digital input pin via serial connection. A 5 volt pulse signal will be connected to one of the inout pins. Thus pulse is connected to an optical proximity sensor. I then need to be able to read the state with a simple serial command eg 'READ P1' This should

    $69 (Avg Bid)
    $69 Avg Bid
    3 bids

    ...update current C# application and associated Arduino program for a major client of ours. There is a physical prototype machine which the Arduino program / PCB board controls, the control system for the prototype consists of Touch-screen tablet, Stepper motors, RFID Readers, LEDs & Microswitches. We have developed a C# application that runs o...

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    47 bids

    The requirement is to publish / subscribe secure MQTT messaging to an AWS MQTT broker directly from a ESP32 based platform over a cell network. The cell network chips used are SIM7000E/SIM808. The deliverable should be in the form of a Arduino IDE project with the interface written in C/C++.

    $1486 (Avg Bid)
    $1486 Avg Bid
    32 bids

    We want to deploy a custom thermal sensor board to detect human presence into private house environment. The sensor board have to detect if there is human presence or not into a closed environment and trigger any status change (presence or not presence) to a control board. The sensor will be installed into ceiling so a proper form factor is required

    $550 (Avg Bid)
    $550 Avg Bid
    10 bids

    Lights controlles and motion censors controlled via Arduino board and posibly a phone

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    1 bids

    I want to make a project hardware with Arduino Uno and WiFi Esp-8266 using. It will be connected through [login to view URL] more information contact.

    $49 (Avg Bid)
    $49 Avg Bid
    23 bids
    $376 Avg Bid
    9 bids

    Trouble shoot: Why Arduino is not receiving a close solenoid message from HC-05. Brief description: in part what the project should do: Open or close a solenoid. Currently, arduino will only close the solenoid. The arduino uses the HC-05 to communicate with my dev app. App has two functions. open/close button.

    $30 (Avg Bid)
    $30 Avg Bid
    32 bids